A search for a superconducting effect on alpha particle differential energy loss in type 1 superconductors
Superconducting effects on alpha particle differential energy loss in tin, vanadium, and lead superconductors
Liu, D. C.↗
SEARCH · Engineering Papers
Results for “superconductor”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The mixed state of superconductors
Mathematical models for mixed state of superconductors
Hudson, W. R.↗
Magnetic flux flow in a Type 2 superconductor
Flow measurement of magnetic flux in Nb-Zr superconductor to infer magnetic induction and currents in material
Urban, E. W.↗
Voltages induced in superconductors by superimposed a.c. and d.c. magnetic fields
Voltage induction in superconductors by superimposed AC and DC magnetic fields
Joiner, W. C. H.↗
New twisted intermetallic compound superconductor: A concept
Method for processing Nb3Sn and other intermetallic compound superconductors produces a twisted, stabilized wire or tube which can be used to wind electromagnetics, armatures, rotors, and field windings for motors and generators as well as other magnetic devices.
Coles, W. D.↗
Measured losses in superconductor magnets for 60-Hertz ac operation.
Results of an experimental study of electrical losses in superconductor magnets. Preliminary 60-Hz ac loss data are presented for coils constructed of Nb3Sn ribbon, Nb-Ti cable, and multifilament Nb-Ti. Losses have been measured for different size coils up to approximately 20 cm in diameter. Of the conductor types tested, Nb3Sn ribbon has the lowest losses for ac operation. In Nb3Sn-ribbon coils of different sizes, the loss per unit length of conductor is shown to decrease with a decrease in the rate of change of current and to increase, in general, with increase in coil size. An important aspect of the study is the high degree of repeatability of the data.
Hamlet, I. L.↗
Joule-heating power dissipation in a type-II superconductor tube.
The theoretical analysis of the Joule-heating power density in a specific hollow cylinder of a NbZr superconductor is presented. It is seen that the power density, which is the primary source of internal heating neglecting localized annihilation heating, can have a very complicated behavior, especially in the circular region. Rough estimates of the relative temperature changes are made, and the locations at which instabilities are more likely to initiate are considered.
Urban, E. W.↗
Fabrication studies of Nb3Al superconductors.
Study aimed at developing fabrication techniques for the production of stabilized conductors containing both binary and ternary intermetallics of the Nb-Al system. Processes are described that offer a foundation for practical fabricating techniques suitable for the production of long lengths of stabilized Nb3Al superconductor. Once the parameters are optimized, it is conceivable that multistrand twisted composites of both binary and ternary intermetallics should become feasible.
Worzala, F. J.↗
Experimental investigation of the critical magnetic fields of transition metal superconductors
The isothermal magnetic transitions of a type 2 superconductor have been studied by AC susceptibility techniques as a function of the amplitude and frequency of the exciting field. The field variation of the complex susceptibility was used to determine the critical fields. The research was planned to clarify the determination (both experimentally and theoretically) of the maximum field at which the superconductive phase spontaneously nucleates in the bulk and on the surface of the metal.
Mcevoy, J. P.↗
Positive curvature of the Hc2-versus-Tc boundaries in layered superconductors
We have found what we believe to be a universal characteristic of layered superconductors: a positive curvature of the Hc2-versus-Tc boundary. The origins of the effect are believed to be associated with strong anisotropies of the Fermi surface and electron-phonon interaction.
Woollam, J. A.↗
Development of a superconductor magnetic suspension and balance prototype facility for studying the feasibility of applying this technique to large scale aerodynamic testing
The basic research and development work towards proving the feasibility of operating an all-superconductor magnetic suspension and balance device for aerodynamic testing is presented. The feasibility of applying a quasi-six-degree-of freedom free support technique to dynamic stability research was studied along with the design concepts and parameters for applying magnetic suspension techniques to large-scale aerodynamic facilities. A prototype aerodynamic test facility was implemented. Relevant aspects of the development of the prototype facility are described in three sections: (1) design characteristics; (2) operational characteristics; and (3) scaling to larger facilities.
Zapata, R. N.↗
The effects of shock wave compaction on the transition temperatures of A15 structure superconductors
Several superconductors with the A15 structure exhibit a positive pressure coefficient, indicating that their transition temperatures increase with applied pressure. Powders of the composition Nb3Al, Nb3Ge, Nb3(Al0.75Ge0.25), and V3Si were compacted by explosive shock waves. The superconducting properties of these materials were measured before and after compaction and it was found that regardless of the sign of the pressure coefficient, the transition temperature is always lowered. The decrease in transition temperature is associated with a decrease in the particle diameter. The shock wave passage through a 3Nb:1Ge powder mixture leads to the formation of at least one compound (probably Nb5Ge3). However, the formation of the A15 compound Nb3Ge is not observed. Elemental niobium powder can be compacted by converging shock waves close to the expected value of the bulk density. Under special circumstances a partial remelting in the center of the sample is observed.
Otto, G. H.↗
Development of superconductor magnetic suspension and balance prototype facility for studying the feasibility of applying this technique to large scale aerodynamic testing
The unique design and operational characteristics of a prototype magnetic suspension and balance facility which utilizes superconductor technology are described and discussed from the point of view of scalability to large sizes. The successful experimental demonstration of the feasibility of this new magnetic suspension concept of the University of Virginia, together with the success of the cryogenic wind-tunnel concept developed at Langley Research Center, appear to have finally opened the way to clean-tunnel, high-Re aerodynamic testing. Results of calculations corresponding to a two-step design extrapolation from the observed performance of the prototype magnetic suspension system to a system compatible with the projected cryogenic transonic research tunnel are presented to give an order-of-magnitude estimate of expected performance characteristics. Research areas where progress should lead to improved design and performance of large facilities are discussed.
Zapata, R. N.↗
Superconductor coil geometry and ac losses
An empirical relation is presented which allows simple computation of volume-averaged winding fields from central fields for coils of small rectangular cross sections. This relation suggests that, in certain applications, ac-loss minimization can be accomplished by use of low winding densities, provided that hysteresis losses are independent of winding density. The ac-loss measurements on coils wound of twisted multifilamentary composite superconductors show no significant dependence on ac losses on winding density, thus permitting the use of winding density as an independent design parameter in loss minimization.
Pierce, T. V., Jr.↗
Chemical vapor deposition of high T sub c superconductors
The results are reported of an investigation into the synthesis and properties of high temperature superconducting materials. A chemical vapor deposition apparatus was designed and built which is suitable for the preparation of multicomponent metal films This apparatus was used to prepare a series of high T sub c A-15 structure superconducting films in the binary system Nb-Ge. The effect on T sub c of a variety of substrate materials was investigated. An extensive series of ternary alloys were also prepared. Conditions allowing the brittle high T sub c (approximately 18 K) A-15 structure superconductor Nb3A1 to be prepared in a low T sub c but ductile form were found. Some of the ways that the ductile (bcc) form can be cold worked or machined are described. Measurements of rate of transformation of cold worked bcc material to the high T sub c A-15 structure with low temperature annealing are given. Preliminary measurements indicate that this material has attractive high field critical current densities.
Webb, G. W.↗
Cryostatic influence of formvar coatings on sizing of the stabilizer in composite NbTi-Cu superconductors
Often undesirable low energy densities are associated with extreme safety measures (e.g. cryostatic stability) in large superconducting magnets. Therefore, a medium-sized, formvar-coated composite NbTi alloy, Cu-stabilized, has been studied (48 filaments, approximately square cross section about 1/5 cm thickness). Thermal quench behavior (caused by heating) was investigated in various fluid states of He4, including pressurized and superfluid He4. The data obtained support existence of a particular coating thickness ('limiting' thickness) with the property that thermal boundary conditions of uncoated superconductors at a quench are not deteriorated.
Caspi, S.↗
Electrical resistivity of composite superconductors
In addition to its superconducting properties, a superconductor is usually characterized by poor thermal conductivity and relatively high electrical resistivity in the normal state. To remedy this situation a study of superconducting properties of Cu-rich CU-Nb wires prepared by directionally solidified and cold-rolled technique was conducted. Some of the specimens were prepared by melting, directional solidification and diffusing in Tin. A total of 12 wire specimens was tested. Each specimen was analyzed by plotting experimental data into the following curves: the graph of the residual resistivity as a function of the specimen current at 4.3 K; and the graph of the electrical resistivity as a function of the temperature at a constant current.
Davis, J. H.↗
Anderson localization and the theory of dirty superconductors
A study is made of the effect of Anderson localization in dirty superconductors. The scale dependence of the diffusion in the vicinity of the mobility edge results in a strong renormalization of the zero-temperature coherence length. This implies the breakdown of the Ginzburg criterion close to the metal-insulator transition and thus the importance of fluctuations in this regime. The upper critical field is calculated, and possible experiments are also discussed.
Kapitulnik, A.↗