Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structure determination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

CSD 2374310: Experimental Crystal Structure Determination

An entry from the Inorganic Crystal Structure Database, the world’s repository for inorganic crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the joint CCDC and FIZ Karlsruhe Access Structures service and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

Cell Parameters↗

X-Ray Absorption Spectroscopy (XAS): Surface Structural Determination of Alloy Nanoparticles

In catalysis since reactions occur on the surface of nanoparticles (NP), it is essential to determine the composition of this structure, rather than that of the nanoparticles, since the two may be, and often are, different. Conventional techniques including X-ray absorption spectroscopy (XAS) and X-ray diffraction (XRD) are powerful techniques, but these data reflect the average composition of the entire particle. In this chapter, we introduce the method of EXAFS analysis, which isolates the surface atoms of nanoparticles based on its sensitivity to chemical reactions, specifically surface oxidation. As shown in our case studies, if the surface of a Pt-based nanoparticle is contacted by air at room temperature, the surface will selectively oxidize, resulting in the loss of Pt-Pt and Pt-M bonds to the formation of Pt-O bonds. The difference between the completely reduced and surface-oxidized nanoparticle allows for the isolation of signal from the catalytic surface. Although these examples highlight Pt alloys, similar analysis is also possible for other group 8 and IB bimetallic catalysts.

Zhang, Guanghui↗

Structure determination of glycogen synthase kinase-3 from Leishmania major and comparative inhibitor structure-activity relationships with Trypanosoma brucei GSK-3

Glycogen synthase kinase-3 (GSK-3) is a drug target under intense investigation in pharmaceutical companies and constitutes an attractive piggyback target for eukaryotic pathogens. Two different GSKs are found in trypanosomatids, one about 150 residues shorter than the other. GSK-3 short (GeneDB: Tb927.10.13780) has previously been validated genetically as a drug target in Trypanosoma brucei by RNAi induced growth retardation; and chemically by correlation between enzyme and in vitro growth inhibition. Here, we report investigation of the equivalent GSK-3 short enzymes of L. major (LmjF18.0270) and L. infantum (LinJ18_V3.0270, identical in amino acid sequences to LdonGSK-3 short) and a crystal structure of LmajGSK-3 short at 2 Å resolution. The inhibitor structure-activity relationships (SARs) of L. major and L. infantum are virtually identical, suggesting that inhibitors could be useful for both cutaneous and visceral leishmaniasis. Leishmania spp. GSK-3 short has different inhibitor SARs than TbruGSK-3 short, which can be explained mostly by two variant residues in the ATP-binding pocket. Indeed, mutating these residues in the ATP-binding site of LmajGSK-3 short to the TbruGSK-3 short equivalents results in a mutant LmajGSK-3 short enzyme with SAR more similar to that of TbruGSK-3 short. The differences between human GSK-3β (HsGSK-3β) and LmajGSK-3 short SAR suggest that compounds which selectively inhibit LmajGSK-3 short may be found.

59 BASIC BIOLOGICAL SCIENCES↗

STEP and STEPSPL: Computer programs for aerodynamic model structure determination and parameter estimation

The successful parametric modeling of the aerodynamics for an airplane operating at high angles of attack or sideslip is performed in two phases. First the aerodynamic model structure must be determined and second the associated aerodynamic parameters (stability and control derivatives) must be estimated for that model. The purpose of this paper is to document two versions of a stepwise regression computer program which were developed for the determination of airplane aerodynamic model structure and to provide two examples of their use on computer generated data. References are provided for the application of the programs to real flight data. The two computer programs that are the subject of this report, STEP and STEPSPL, are written in FORTRAN IV (ANSI l966) compatible with a CDC FTN4 compiler. Both programs are adaptations of a standard forward stepwise regression algorithm. The purpose of the adaptation is to facilitate the selection of a adequate mathematical model of the aerodynamic force and moment coefficients of an airplane from flight test data. The major difference between STEP and STEPSPL is in the basis for the model. The basis for the model in STEP is the standard polynomial Taylor's series expansion of the aerodynamic function about some steady-state trim condition. Program STEPSPL utilizes a set of spline basis functions.

Batterson, J. G.↗

Synthesis and single-crystal structure determination of the zinc nitride halides Zn{sub 2}NX (X=Cl, Br, I)

A series of zinc nitride halides, Zn{sub 2}NX (X=Cl, Br, I), has been synthesized from solid–liquid reactions of zinc nitride with the respective zinc halides under vacuum, and their crystal structures were determined using single-crystal and powder X-ray diffraction. While Zn{sub 2}NCl and Zn{sub 2}NBr crystallize in the acentric orthorhombic space group Pna2{sub 1}, Zn{sub 2}NI adopts the centrosymmetric space group Pnma; Zn{sub 2}NCl and Zn{sub 2}NBr can be considered to belong to the anti-β-NaFeO{sub 2} type, and Zn{sub 2}NI is closely related. Each N{sup 3−} is tetrahedrally coordinated by zinc atoms, and the X{sup −} anions are located in the vacancies of the framework formed by corner-sharing [NZn{sub 4}] tetrahedra. According to TGA/DTA analyses, the Zn{sub 2}NX compounds exhibit good thermal stability. The electronic structure has been analyzed by employing density-functional theory and the HSE06 hybrid functional. - Graphical abstract: Zn{sub 2}NCl, Zn{sub 2}NBr, and Zn{sub 2}NI have been synthesized, and their crystal structures (Cl and Br phases: Pna2{sub 1}; I phase: Pnma) have been determined from XRD; the direct band gap of Zn{sub 2}NCl is theoretically (HSE06 hybrid functional) predicted as 3.7 eV. - Highlights: • Zn{sub 2}NCl, Zn{sub 2}NBr, and Zn{sub 2}NI have been synthesized from solid–liquid reactions. • The crystal structures of Zn{sub 2}NCl, Zn{sub 2}NBr, and Zn{sub 2}NI have been determined from single-crystal X-ray diffraction. • Zn{sub 2}NCl and Zn{sub 2}NBr crystallize in the acentric space group Pna2{sub 1} whereas Zn{sub 2}NI adopts the centrosymmetric space group Pnma. • Zn{sub 2}NCl and Zn{sub 2}NBr are stable up to 750 °C whereas Zn{sub 2}NI decays at 600 °C already. • The direct band gap of Zn{sub 2}NCl is theoretically predicted as 3.7 eV using the HSE06 hybrid functional.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal growth and structure determination of K{sub 2}TiO{sub 3}: A five coordinate titanate

Long, needle-shaped single crystals of K{sub 2}TiO{sub 3} were grown out of a reactive high temperature hydroxide melt. The structure was determined by single crystal X-ray diffraction and found to crystallize in the orthorhombic Cmcm space group with a = 10.0283(2) A, b = 6.9346(2) A, c = 5.4534(1) A, V = 379.242(15) A{sup 3}, and Z = 4. The structure is related to the K{sub 2}SnO{sub 3} and K{sub 2}ZrO{sub 3} structures, which crystallize in the Pnma space group, and that of K{sub 2}PbO{sub 3}, which crystallizes in the Cmc2{sub 1} space group. The structure consists of chains of trans edge-sharing TiO{sub 5} rectangular pyramids with alternating apical directions. The chains are separated by KO{sub 7} polyhedra.

36 MATERIALS SCIENCE↗

Recombinant production, crystallization and X-ray crystallographic structure determination of the peptidyl-tRNA hydrolase of Pseudomonas aeruginosa

The peptidyl-tRNA hydrolase enzyme from the pathogenic bacterium Pseudomonas aeruginosa (Pth; EC 3.1.1.29) has been cloned, expressed in Escherichia coli and crystallized for X-ray structural analysis. Suitable crystals were grown using the sitting-drop vapour-diffusion method after one week of incubation against a reservoir solution consisting of 20% polyethylene glycol 4000, 100 mM Tris pH 7.5, 10%(v/v) isopropyl alcohol. The crystals were used to obtain the three-dimensional structure of the native protein at 1.77 Å resolution. The structure was determined by molecular replacement of the crystallographic data processed in space group P6122 with unit-cell parameters a = b = 63.62,c = 155.20 Å, α = β = 90, γ = 120°. The asymmetric unit of the crystallographic lattice was composed of a single copy of the enzyme molecule with a 43% solvent fraction, corresponding to a Matthews coefficient of 2.43 Å3 Da-1. The crystallographic structure reported here will serve as the foundation for future structure-guided efforts towards the development of novel small-molecule inhibitors specific to bacterial Pths.

peptidyl-tRNA↗

Long- and Short-Range Constraints for the Structure Determination of Layered Silicates with Stacking Disorder

Layered silicates have important applications as host materials, supports for catalysis, and zeolite precursors. However, their local structures are often challenging to establish due to disorder of the sheet assemblies. We present a new protocol that combines long- and short-range structural constraints from diffraction and solid-state NMR techniques, respectively, to determine the molecular structure of layered silicates in the presence of various extents of stacking disorder. Solid-state 29Si NMR data are largely insensitive to the incomplete extent of three-dimensional (3D) crystallinity that limits the interpretation of diffraction data alone to the identification of possible unit cells and space groups. State-of-the-art NMR crystallography techniques consequently provide a simplified view of materials from which candidate framework structures can be built and evaluated based on local structural constraints, including interatomic distances, Si site numbers and multiplicities, and Si–O–Si connectivities, and refined using density functional theory. This protocol was applied to a new layered silicate material named CLS-1, of composition [Si5O11H][C9N2H15]·1.9(H2O), synthesized by using a fluoride-based protocol and cationic alkylaminopyridinium as a structure-directing agent (SDA). Despite the intrinsic complexity and partial ordering of the intersheet arrangements and organic–inorganic interactions, this led to the identification of a single space group that is compatible with both NMR and diffraction data, from which the silicate framework structure could be established,. The remarkable similarities between the layered framework structures of CLS-1, HUS-2 (Tsunoji et al. J. Mater. Chem.2012, 22, 13682), and another layered silicate material with a radically different morphology and extent of stacking order and interlayer dynamics, established by using a similar approach (Brouwer et al. J. Am. Chem. Soc.2013, 135, 5641), point to the remarkable robustness of this previously unknown silicate framework type.

Cadars, Sylvian↗

Analysis of phases in the structure determination of an icosahedral virus

The constraints imposed on structure-factor phases by noncrystallographic symmetry (NCS) allow phase improvement, phase extension to higher resolution and hence ab initio phase determination. The more numerous the NCS redundancy and the greater the volume used for solvent flattening, the greater the power for phase determination. In a case analyzed here the icosahedral NCS phasing appeared to have broken down, although later successful phase extension was possible when the envelope around the NCS region was tightened. The phases from the failed phase-determination attempt fell into four classes, all of which satisfied the NCS constraints. These four classes corresponded to the correct solution, opposite enantiomorph, Babinet inversion and opposite enantiomorph with Babinet inversion. These incorrect solutions can be seeded from structure factors belonging to reciprocal-space volumes that lie close to icosahedral NCS axes where the structure amplitudes tend to be large and the phases tend to be 0 or {pi}. Furthermore, the false solutions can spread more easily if there are large errors in defining the envelope designating the region in which NCS averaging is performed.

58 GEOSCIENCES↗

Structure determination of the clean (001) surface of strained Si on Si{sub 1−x}Ge{sub x}

The surface structure of the strained Si(001) (thickness of 20 nm) on Si{sub 1−x}Ge{sub x} (x = 0.1, 0.2, and 0.3) was studied by low-energy electron diffraction (LEED). LEED intensity-energy spectra of the 2 × 1 reconstructed clean surfaces showed a systematic change that indicates the lattice contraction along the [001] direction remains even at the surfaces. The atomic structures were quantitatively determined, and they were compared with the unstrained pristine Si. The differences in the atomic position almost follow the difference in the bulk lattice constant determined by X-ray diffraction measurements. The results indicate that the strain produced at the Si/Si{sub 1−x}Ge{sub x} interface remains unchanged up to the surface layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab-initio structure determination of {beta}-La{sub 2}WO{sub 6}

The structure of the low-temperature form of {beta}-La{sub 2}WO{sub 6} has been determined from laboratory X-ray, neutron time-of-flight and electron diffraction data. This tungstate crystallizes in the non-centrosymmetric orthorhombic space group (no. 19) P2{sub 1}2{sub 1}2{sub 1}, with Z=8, a=7.5196(1) A, b=10.3476(1) A, c=12.7944(2) A, and a measured density 7.37(1) g cm{sup -3}. The structure consists of tungsten [WO{sub 6}] octahedra and tetrahedral [OLa{sub 4}]. Tungsten polyhedra are connected such that [W{sub 2}O{sub 11}]{sup 10-} units are formed. - Graphical abstract: Projection of La{sub 2}WO{sub 6} structure along [100]. The structure could be described by [W{sub 2}O{sub 11}]{sup -10} structural unit formed by two corner-sharing octahedra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of the La{sub 2}O{sub 3}–Nb{sub 2}O{sub 5}–WO{sub 3} ternary phase diagram: Isolation and crystal structure determination of the original La{sub 3}NbWO{sub 10} material

In the course of the exploration of the La{sub 2}O{sub 3}–WO{sub 3}–Nb{sub 2}O{sub 5} ternary phase diagram, a new compound with the formula La{sub 3}NbWO{sub 10} was discovered. Its structure was determined from a combination of powder X-ray and neutron diffraction data. It crystallizes in the tetragonal space group P4{sub 2}/nmc (no. 137) with the lattice parameters: a=10.0807(1) Å; c=12.5540(1) Å. The structure is built up from infinite ribbons of octahedra (W/Nb)O{sub 5} which are perpendicular to each other, lanthanum ions being distributed around these ribbons. The electrical properties of this compound were investigated on sintered pellets by means of complex impedance spectroscopy. - Graphical abstract: Projection along the c-axis of cationic and anionic positions of a La{sub 3}NbWO{sub 10} unit cell. - Highlights: • The structure of La{sub 3}NbWO{sub 10} was resolved from the XRD and ND data. • The structure was described in many ways. • The ionic conduction property was studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure determination of the high-pressure phase of CdSe

Structural phase transition sequence of CdSe has been investigated at pressures up to 60 GPa under quasi-hydrostatic conditions using synchrotron X-ray diffraction. A phase transition from the wurtzite type (B4) to the NaCl-type (B1) structure has been observed, followed by another phase transition to an orthorhombic structure at 27 GPa, in agreement with previous reports. We show that this high-pressure orthorhombic phase has a Pnma symmetry rather than being a Cmcm-symmetric structure as previously suggested. From our observations, the appearance of the new reflections and reflection splitting with increasing pressure is due to the change of atomic relative positions in crystal lattice and the difference in the compression ratio of lattice parameters for the Pnma structure, and we find no evidence for the third phase transition reported previously. The pressure-induced phase transition of CdSe has been further confirmed by the density-functional theory calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystal growth and structure determinations of potassium hafnates: K{sub 2}Hf{sub 2}O{sub 5} and K{sub 4}Hf{sub 5}O{sub 12}

Research highlights: {yields} Crystals of K{sub 2}Hf{sub 2}O{sub 5} and K{sub 4}Hf{sub 5}O{sub 12} were grown from a potassium hydroxide flux. {yields} The structures were solved by single-crystal X-ray diffraction. {yields} K{sub 2}Hf{sub 2}O{sub 5} has a channel structure, whereas K{sub 4}Hf{sub 5}O{sub 12} possesses a layered structure. -- Abstract: Crystals of K{sub 2}Hf{sub 2}O{sub 5} and K{sub 4}Hf{sub 5}O{sub 12} were grown from molten potassium hydroxide flux. The crystal structures were determined by single-crystal X-ray diffraction. K{sub 2}Hf{sub 2}O{sub 5} crystallizes in the space group Pnna of the orthorhombic system, with unit cell dimensions of a = 5.780(1) A, b = 10.640(2) A, and c = 8.666(2) A. This compound contains infinite chains of HfO{sub 6} octahedra that form a channel structure. K{sub 4}Hf{sub 5}O{sub 12} crystallizes in the space group P3{sup -bar} m1 of the trigonal system, with unit cell dimensions of a = 5.7877(2) A and c = 10.3693(7) A. This compound possesses a layered structure with six-coordinate Hf in three different coordination environments (trigonal prismatic, distorted octahedral, and regular octahedral).

36 MATERIALS SCIENCE↗

Bactericidal effectors of the Stenotrophomonas maltophilia type IV secretion system: functional definition of the nuclease TfdA and structural determination of TfcB

ABSTRACT Stenotrophomonas maltophilia expresses a type IV protein secretion system (T4SS) that promotes contact-dependent killing of other bacteria and does so partly by secreting the effector TfcB. Here, we report the structure of TfcB, comprising an N-terminal domain similar to the catalytic domain of glycosyl hydrolase (GH-19) chitinases and a C-terminal domain for recognition and translocation by the T4SS. Utilizing a two-hybrid assay to measure effector interactions with the T4SS coupling protein VirD4, we documented the existence of five more T4SS substrates. One of these was protein 20845, an annotated nuclease. A S. maltophilia mutant lacking the gene for 20845 was impaired for killing Escherichia coli , Klebsiella pneumoniae , and Pseudomonas aeruginosa . Moreover, the cloned 20845 gene conferred robust toxicity, with the recombinant E. coli being rescued when 20845 was co-expressed with its cognate immunity protein. The 20845 effector was an 899 amino-acid protein, comprised of a GHH-nuclease domain in its N-terminus, a large central region of indeterminant function, and a C-terminus for secretion. Engineered variants of the 20845 gene that had mutations in the predicted catalytic site did not impede E. coli , indicating that the antibacterial effect of 20845 involves its nuclease activity. Using flow cytometry with DNA staining, we determined that 20845, but not its mutant variants, confers a loss in DNA content of target bacteria. Database searches revealed that uncharacterized homologs of 20845 occur within a range of bacteria. These data indicate that the S. maltophilia T4SS promotes interbacterial competition through the action of multiple toxic effectors, including a potent, novel DNase. IMPORTANCE Stenotrophomonas maltophilia is a multi-drug-resistant, Gram-negative bacterium that is an emerging pathogen of humans. Patients with cystic fibrosis are particularly susceptible to S. maltophilia infection. In hospital water systems and various types of infections, S. maltophilia co-exists with other bacteria, including other pathogens such as Pseudomonas aeruginosa . We previously demonstrated that S. maltophilia has a functional VirB/D4 type VI protein secretion system (T4SS) that promotes contact-dependent killing of other bacteria. Since most work on antibacterial systems involves the type VI secretion system, this observation remains noteworthy. Moreover, S. maltophilia currently stands alone as a model for a human pathogen expressing an antibacterial T4SS. Using biochemical, genetic, and cell biological approaches, we now report both the discovery of a novel antibacterial nuclease (TfdA) and the first structural determination of a bactericidal T4SS effector (TfcB).

59 BASIC BIOLOGICAL SCIENCES↗

Precise equilibrium structure determination of hydrazoic acid (HN{sub 3}) by millimeter-wave spectroscopy

The millimeter-wave spectrum of hydrazoic acid (HN{sub 3}) was analyzed in the frequency region of 235-450 GHz. Transitions from a total of 14 isotopologues were observed and fit using the A-reduced or S-reduced Hamiltonian. Coupled-cluster calculations were performed to obtain a theoretical geometry, as well as rotation-vibration interaction corrections. These calculated vibration-rotation correction terms were applied to the experimental rotational constants to obtain mixed theoretical/experimental equilibrium rotational constants (A{sub e}, B{sub e}, and C{sub e}). These equilibrium rotational constants were then used to obtain an equilibrium (R{sub e}) structure using a least-squares fitting routine. The R{sub e} structural parameters are consistent with a previously published R{sub s} structure, largely falling within the uncertainty limits of that R{sub s} structure. The present R{sub e} geometric parameters of HN{sub 3} are determined with exceptionally high accuracy, as a consequence of the large number of isotopologues measured experimentally and the sophisticated (coupled-cluster theoretical treatment (CCSD(T))/ANO2) of the vibration-rotation interactions. The R{sub e} structure exhibits remarkable agreement with the CCSD(T)/cc-pCV5Z predicted structure, validating both the accuracy of the ab initio method and the claimed uncertainties of the theoretical/experimental structure determination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗