Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural transitions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Novel Charge-Ordered States in 1 T -IrTe 2

1T-IrTe 2 exhibits an intriguing series of charge-ordered states in both bulk and atomically thin layers. The charge orders in IrTe 2 emerge with consecutive first-order structural transitions involving in-plane Ir–Ir dimerization and interlayer Te–Te depolymerization, resulting in stripe patterns with various periods. Upon chemical doping, 1T-IrTe 2 can also be driven into a superconductor. Despite the intense research effort, a comprehensive understanding of the nature of the charge ordering and its relation to the superconductivity is yet to be reached. This review provides an overview of the novel charge orders and the emergence of superconductivity in IrTe 2 . Finally, we further introduce the recent studies on IrTe 2 nanoflake, in which novel charge orders attainable only in two-dimensional limits lay the grounds for an exotic phase diagram.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of Pressure on Superconducting Properties and Vortex Pinning of CaKFe 4 As 4 Single Crystals

Measurements of low field magnetization, trapped flux magnetization and 5 K flux creep in single crystal of CaKFe 4 As 4 under pressure up to 7.5 GPa in a diamond pressure cell are presented. Further, the observed evolution of the temperature dependence of the self-field critical current and slowing down of the base temperature flux creep rate are explained within the two sources of pinning hypothesis involving presence of CaFe 2 As 2 intergrowths suggested in the literature. Above the half collapsed tetragonal structural transition under pressure, where superconductivity is non-bulk or absent, critically diminished or no diamagnetism and flux trapped magnetization were observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Broadening of the D lines and the relaxation of the resonance levels of sodium due to collisions with helium.

Calculated potentials for the NaHe molecule are used to obtain collision-induced widths and shifts for the sodium D lines together with cross sections for fine-structure transitions and the relaxation of the multipole polarizations of the resonance levels. The atomic collision is treated in an adiabatic approximation in which the colliding atoms form a molecular system which rotates during the collision. We find the resonance lines to be broadened equally and to be approximately 70% wider, and with associated shifts of an order of magnitude smaller, than expected on the basis of van der Waals forces. The dependence of the cross sections for relaxation of the multipole polarizations of the resonance levels on the molecular-coupling conditions and the rotation of the system during collision is discussed and indicates a limitation of the sum rule for these cross sections.

Lewis, E. L.↗

Selective reabsorption leading to multiple oscillations in the 8446-A atomic-oxygen laser.

Laser oscillation of atomic oxygen at 8446 A occurs in four closely spaced lines with peculiar intensity ratios, all detuned from the atomic center frequencies of the three fine-structure transitions. These anomalies are caused by the selective reabsorption of resonance radiation from the lower laser level by ground-state oxygen atoms. The selectivity results from the fact that the velocity distribution of the laser levels is considerably wider than that of the ground state, because of the dissociative mode of production of excited oxygen atoms. Possible extension of this mechanism to the atomic-hydrogen system is discussed.

Feld, M. S.↗

Interactions among multiple lines in the 8446-A atomic-oxygen laser.

The atomic-oxygen laser oscillates at four closely spaced frequencies on the gain profile of the 8446-A fine-structure transitions. A set of experiments is reported which studies the competition among these four lines by suppressing one of them. The results are explained on the basis of the interaction of laser lines oscillating on Doppler-broadened transitions sharing a common lower level.

Domash, L. H.↗

Model calculations for diffuse molecular clouds

A steady state isobaric cloud model is developed. The pressure, thermal, electrical, and chemical balance equations are solved simultaneously with a simple one dimensional approximation to the equation of radiative transfer appropriate to diffuse clouds. Cooling is mainly by CII fine structure transitions, and a variety of heating mechanisms are considered. Particular attention is given to the abundance variation of H2. Inhomogeneous density distributions are obtained because of the attenuation of the interstellar UV field and the conversion from atomic to molecular hyrodgen. The effects of changing the model parameters are described and the applicability of the model to OAO-3 observations is discussed. Good qualitative agreement with the fractional H2 abundance determinations has been obtained. The observed kinetic temperatures near 80 K can also be achieved by grain photoelectron heating. The problem of the electron density is solved taking special account of the various hydrogen ions as well as heavier ones.

Glassgold, A. E.↗

Model calculations for diffuse molecular clouds

A local steady-state isobaric model of the interstellar clouds is developed and applied to the OAO-3 observations. The model allows for cooling by C II fine-structure transitions and for inhomogeneities resulting from attenuations in the external radiations which heat the cloud constituents. Factors affecting the thermal properties of the clouds are emphasized; these include H and H2 balance, interstellar grain heating, electron density, and calcium equilibrium. The thermodynamic consequences of the attenuation of the ultraviolet interstellar radiation field are studied. The effect of varying the most important parameters and their allowed ranges is considered. Results indicate that the model is capable of reproducing the H2 fractional abundances and kinetic temperatures observed by OAO-3.

Glassgold, A. E.↗

Fresh lunar impact craters - Review of variations with size

Thirty-three morphologic characteristics are reviewed for fresh lunar impact craters wider than 1 km. Bar graphs express the way each characteristic varies with crater size. The features are grouped as crater structure, ejecta, and downhill flow features. Major structural transitions occur at diameters of about 15 and 200 km. Details of the ejecta blanket, which include several kinds of lineations, dunelike ridges, troughs, and lobes, reflect different transport regimes in the ejecta. Some materials at larger craters flowed downhill in lavalike fashion after the ejecta was deposited; the lavalike materials are probably impact melt.

Howard, K. A.↗

Remote servicing of free-flying spacecraft

A ground simulation to demonstrate system compatibility by enacting satellite ground installation, orbit delivery, space servicing, and contingency retrieval with the space shuttle orbiter was conducted. The basic configuration approach adopted for the spacecraft groups the standardized subsystems in the aft portion of the spacecraft and leaves the volume forward of the transition structure available for the mission peculiar equipment and sensors. The version used for this simulation is configured as an earth observatory with multispectral mapping and high resolution imaging sensors. All modules including the propulsion package and the sensor modules are replaceable on orbit in the event of depletion, wearout, malfunction, or the availability of an improved version.

Cepollina, F. J.↗

Variable temperature pressure cell for polycrystalline X-ray studies down to 2 K - Application to Bi

A variable pressure diamond anvil cell is described for operation at temperatures continuously variable from 300 down to 2 K and controllable within 10 mK. Polycrystalline X-ray data are collected from the pressure cavity by means of either (1) standard photographic techniques, (2) diffractometer measurements, or (3) energy dispersive diffractometry. The facility has been used to examine parts of the phase diagram of Bi. Results from this study indicate that the Bi-I and Bi-III structures are retained to low temperatures; however, there is no evidence to support a structural transition from Bi-V to Bi-VIII.

Skelton, E. F.↗

Observations of the 51.8 micron (O III) emission line in Orion

The 51.8 micron fine structure transition P2:3P2 3P1 for doubly ionized oxygen was observed in the Orion nebula. The observed line strength is of 5 plus or minus 3 times 10 to the minus 15th power watt/sq cm is in good agreement with theoretical predictions. Observations are consistent with the newly predicted 51.8 micron line position. The line lies close to an atmospheric water vapor feature at 51.7 micron, but is sufficiently distant so that corrections for this feature are straightforward. Observations of the 51.8 (O III) line are particularly important since the previously discovered 88 micron line from the same ion also is strong. This pair of lines should, therefore, yield new data about densities in observed H II regions; or else, if density data already are available from radio or other observations, the lines can be used to determine the differential dust absorption between 52 and 88 micron in front of heavily obscured regions.

Melnick, G.↗

Observations of the 51.8 micron forbidden O III emission line in Orion

This letter reports observations of the 51.8-micron fine-structure transition p2: 3P(2) - 3P(1) for doubly ionized oxygen. The observed line strength in the Orion Nebula is (5 + or - 3) by 10 to the -15th power W/sq cm, in good agreement with the theoretical predictions of Simpson (1975). The observations are also consistent with the predicted line position, 51.8 microns. The line lies close to an atmospheric water-vapor feature at 51.7 microns but is sufficiently distant so that corrections for this feature are straightforward. Observations of the 51.8-micron forbidden O III line are particularly important, since the previously discovered 88-micron line from the same ion also is strong. This pair of lines should therefore yield new data about densities in observed H II regions; or else, if density data already are available from radio or other observations, the lines can be used to determine the differential dust absorption between 52 and 88 microns in front of heavily obscured regions.

Melnick, G.↗

Observation of the 63 micron (0 1) emission line in the Orion and Omega Nebulae

The 63 micron fine structure transition P4 : 3Pl yields 3P2 for neutral atomic oxygen was obtained during a series of flights at an altitude of approximately 13.7 km. In the Orion Nebula (M42), the observed line strength was 8 x 10 to the minus 15 power watt cm/2 which is estimated to be approximately 0.3 o/o of the energy radiated at all wavelengths. For the Omega Nebulae (M17), the line strength was 2.4 x 10 to the minus 15 power watt cm/2, and the fraction of the total radiated power was slightly higher. These figures refer to a 4' x 6' field of view centered on the peak for infrared emission from each source. The uncertainty in the line strength is approximately 50% and is caused by variable water vapor absorption along the flight path of the airplane. The line position estimate is 63.2 micron (+0.1, -0.2) micron. The prime uncertainty is due to the uncertain position of the (0 I) emitting regions in the field of view.

Melnick, G.↗

Far-infrared emission line and continuum observations of NGC 7027

The first observation of a fine-structure transition in NGC 7027 at wavelengths greater than 30 microns is reported. The flux in the 63.2-micron line is found to be approximately 10 to the -16th W/sq cm. It is noted that if NGC 7027 lies at 1 kpc, this corresponds to a luminosity, in the line, approximately 30 times greater than the solar luminosity. The flux of the 88.35-micron line is less than 10 to the -17th W/sq cm, and the upper limit to the line flux at 51.8 microns is found to be 10 to the -16th W/sq cm. These upper limits imply an electron density that is less than 1.6 x 10 to the 5th/cu cm. It is noted that the continuum measurements obtained support a dust temperature of 90 K with an emissivity approximately equal to the reciprocal of the square of the wavelength. The data exclude grain materials whose wavelength-dependent emissivity (the reciprocal of the wavelength raised to nth power) requires n to be outside the range between 1.6 and 2, unless the temperature varies drastically across the dust cloud

Melnick, G.↗

Submillimetre observations of atomic carbon

Emission from the ground state fine structure transition of atomic carbon at 610 microns has been observed in Galactic sources. From comparison of the observations with CO emission, it can be deduced that the abundance of neutral carbon relative to CO is high (approximately 0.1-3). The spatial and velocity distribution of CI and CO are often very similar. If molecular clouds are older than 1 x 10 to the 6th power years, the observations necessitate a mechanism which can maintain a high abundance of neutral carbon in cloud material, either by hindering complete conversion of C into CO or by physically and chemically rejuvenating the material.

Phillips, T. G.↗

InSb heterodyne receivers for submillimeter astronomy

InSb hot electron bolometer mixer receivers have been developed for submillimeter line studies of the interstellar medium up to about 500 GHz. The receivers have been used aboard the NASA Kuiper Airborne Observatory which is transported to about 12,000 km by a C141 aircraft. Data have been obtained on new interstellar lines (such as the ground-state fine structure transition of atomic carbon at 492 GHz) and such molecular transitions as carbon monoxide and water. Other data were obtained at ground level using the 5-cm Hale telescope at Mount Palomar and the NASA Infrared Telescope facility at Mauna Kea, HI. The heterodyne bolometers have reached noise temperatures of less than 400 K at all frequencies to 500 GHz.

Phillips, T. G.↗