Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural buckling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Digital Image Correlation Data Processing and Analysis Techniques to Enhance Test Data Assessment and Improve Structural Simulations

The NASA Shell Buckling Knockdown Factor Project (SBKF) was established in 2007 by the NASA Engineering and Safety Center (NESC) with the primary goal to develop new analysis-based buckling design factors (a.k.a. knockdown factors) and high-fidelity buckling simulations for selected launch-vehicle-like cylindrical shell structures. A series of tests are being conducted on large-scale metallic and composite cylindrical shells in order to provide validation data for these new factors and simulations. However, the validation of these new factors and simulations is quite demanding and requires test data that is commensurate with their fidelity. Traditional instrumentation, such as linear variable displacement transducers (LVDTs) and electrical-resistance strain gages serve a critical role in providing accurate displacement and strain measurements in these tests, but only allow for data to be recorded at a select number of point locations and are not sufficient to provide all the necessary validation data. Advanced measurement technologies can be used effectively to complement traditional instrumentation and gather additional data required to validate these structural simulations. In particular, three-dimensional digital image correlation (DIC) was implemented during SBKF cylinder testing to characterize the full-field displacement and strain behavior. Commercially available VIC-3DTM software and user-written data processing scripts were used to generate valuable data and insight into the complex buckling response of the cylinders that otherwise would be impossible to gather using traditional instrumentation. In addition, the measured data from DIC was used to verify measured test data obtained from other instrumentation, enhance test and analysis correlation, and help identify the root cause of anomalous test results that may have gone unexplained if only traditional instrumentation was used. Selected test results that demonstrate the use of DIC on the SBKF cylinders are presented and a portion of the data processing methods are described.

Gardner, Nathaniel W.↗
NASA NTRS1973

BUCLASP 3: A computer program for stresses and buckling of heated composite stiffened panels and other structures, user's manual

The use of the computer program BUCLASP3 is described. The code is intended for thermal stress and instability analyses of structures such as unidirectionally stiffened panels. There are two types of instability analyses that can be effected by PAINT; (1) thermal buckling, and (2) buckling due to a specified inplane biaxial loading. Any structure that has a constant cross section in one direction, that may be idealized as an assemblage of beam elements and laminated flat and curved plate strip-elements can be analyzed. The two parallel ends of the panel must be simply supported, whereas arbitrary elastic boundary conditions may be imposed along any one or both external longitudinal side. Any variation in the temperature rise (from ambient) through the cross section of a panel is considered in the analyses but it must be assumed that in the longitudinal direction the temperature field is constant. Load distributions for the externally applied inplane biaxial loads are similar in nature to the permissible temperature field.

Tripp, L. L.↗
NASA NTRS1989

Active control of buckling of flexible beams

Mathematical models are presented that simulate the dynamic characteristics of shape memory alloy actuators made of nickel-titanium alloy (Nitinol) controlling the buckling of compressive structural members. A closed-loop computer-controlled system has been designed, based on the proposed mathematical models, and has been implemented to control the buckling of simple beams. The performance of the computer-controlled system is evaluated experimentally and compared with the theoretical predictions to validate the developed models. The results emphasized the importance of buckling control and suggest the potential of shape memory alloy actuators as attractive means for controlling structural deformation in a simple and reliable way.

Baz, A.↗
NASA NTRS2010

Buckling Imperfection Sensitivity of Axially Compressed Orthotropic Cylinders

Structural stability is a major consideration in the design of lightweight shell structures. However, the theoretical predictions of geometrically perfect structures often considerably over predict the buckling loads of inherently imperfect real structures. It is reasonably well understood how the shell geometry affects the imperfection sensitivity of axially compressed cylindrical shells; however, the effects of shell anisotropy on the imperfection sensitivity is less well understood. In the present paper, the development of an analytical model for assessing the imperfection sensitivity of axially compressed orthotropic cylinders is discussed. Results from the analytical model for four shell designs are compared with those from a general-purpose finite-element code, and good qualitative agreement is found. Reasons for discrepancies are discussed, and potential design implications of this line of research are discussed.

Schultz, Marc R.↗
NASA NTRSDate not supplied

Modeling and Sensitivity Analysis of Sandwich Composite Cylinders with Geometric Imperfections

It is well known that manufactured shell structures can have significantly lower buckling loads and different mode shapes than the theoretical predictions for perfect structures. Much of this difference can be attributed to geometric and loading imperfections, and geometrically nonlinear effects. The buckling response of cylindrical structures can be investigated using geometrically nonlinear finite element analyses and including radial imperfections. Such analyses are used in the NASA Engineering and Safety Center Shell Buckling Knockdown Factor Project, which has the goal of developing new analysis-based buckling design recommendations for select classes of cylindrical shell structures under uniaxial compressive load. The approach for modeling several sandwich composite cylinders with two-dimensional general-purpose shell elements and the influence of the element type selection and element size on the buckling load is discussed. The influence of geometric imperfections of various magnitudes on buckling behavior of a sandwich composite cylinder was also investigated.

Structural Modeling↗
NASA NTRSDate not supplied

: Modeling and Sensitivity Analysis of Sandwich Composite Cylinders with Geometric Imperfections

It is well known that manufactured shell structures can have significantly lower buckling loads and different mode shapes than the theoretical predictions for perfect structures. Much of this difference can be attributed to geometric and loading imperfections, and geometrically nonlinear effects. The buckling response of cylindrical structures can be investigated using geometrically nonlinear finite element analyses and including radial imperfections. Such analyses are used in the NASA Engineering and Safety Center Shell Buckling Knockdown Factor Project, which has the goal of developing new analysis-based buckling design recommendations for select classes of cylindrical shell structures under uniaxial compressive load. The approach for modeling several sandwich composite cylinders with two-dimensional general-purpose shell elements and the influence of the element type selection and element size on the buckling load is discussed. The influence of geometric imperfections of various magnitudes on buckling behavior of a sandwich composite cylinder was also investigated.

Structural Modeling↗
NASA NTRS1967

Heavy-gage bonded honeycomb sandwich as primary load-bearing structure

Heavy-gage bonded honeycomb sandwich is used as a primary load-bearing structural material in large-diameter boosters. Theoretical investigations based on a small deflection theory for prediction of stress fields and buckling loads, and structural testing were made. This structure is a potential weight saver for compression load-critical components.

Source record↗
NASA NTRS1980

Comparison of structural behavior of superplastically formed/diffusion-bonded sandwich structures and honeycomb core sandwich structures

A superplasticity formed/diffusion-bonded (SPF/DB) orthogonally corrugated core sandwich structure is discussed and its structural behavior is compared to that of a conventional honeycomb core sandwich structure. The stiffness and buckling characteristics of the two types of sandwich structures are compared under conditions of equal structural density. It is shown that under certain conditions, the SPF/DB orthogonally corrugated core sandwich structure is slightly more efficient than the optimum honeycomb core (square-cell core) sandwich structure. However, under different conditions, this effect can be reversed.

Ko, W. L.↗
NASA NTRSDate not supplied

Progressive Damage Failure Analysis of Post-Buckled Composite Single-Stringer Panel with Teflon Inserts

The high strength-to-weight and stiffness-to-weight ratio materials, such as laminated composites, are advantageous for modern aircraft. Laminated composites with initial flaws are susceptible to delamination under buckling loads. PDA tools help enhance the industry’s understanding of the mechanisms for damage initiation and growth in composite structures while assisting in the design, analysis, and sustainment methods of these composite structures. The global-local modeling approach for the single-stringer post-buckled panel was evaluated through this effort, using Teflon inserts to simulate the defect of damage during manufacturing. This understanding is essential for designing the post-buckled structure, reducing weight while predicting damage initiation location, and addressing a potential design review for future aircraft repairs. In this work, the initial damage was captured with Teflon inserts as the starting configuration; and any reference to the damage initiation refers to any damage beyond the “initial unbonded region.” The effort aims to develop, evaluate, and enhance methods to predict damage initiation and progression and the failure of post-buckled hat-stiffened panels using multiple Abaqus FEA Virtual Crack Closure Technique (VCCT) definitions. Validation of the PDA using the VCCT material model was performed on a large single-stringer panel subjected to compressive loading. The compressive loading of the panel caused the skin to buckle before any damage began to occur locally. In addition, comparisons are made for critical aspects of the damage morphology, such as a growth pattern that included delamination from the skin-stiffener interface to the skin and ply interfaces. When compared against the experimental data produced through the NASA Advanced Composites Project (ACP), the present model captured damage migration from one surface to another, and model validations were within 4% of the experimental data.

PDA↗
NASA NTRS2018

Test and Analysis of a Buckling-Critical Large-Scale Sandwich Composite Cylinder

Structural stability is an important design consideration for launch-vehicle shell structures and it is well known that the buckling response of such shell structures can be very sensitive to small geometric imperfections. As part of an effort to develop new buckling design guidelines for sandwich composite cylindrical shells, an 8-ft-diameter honeycomb-core sandwich composite cylinder was tested under pure axial compression to failure. The results from this test are compared with finite-element-analysis predictions and overall agreement was very good. In particular, the predicted buckling load was within 1% of the test and the character of the response matched well. However, it was found that the agreement could be improved by including composite material nonlinearity in the analysis, and that the predicted buckling initiation site was sensitive to the addition of small bending loads to the primary axial load in analyses.

Schultz, Marc R.↗
DOE OSTI2023

Intercalation And High-Pressure Effects On Structural Phase Transitions In Layered As x P 1-x Alloys

This project was aimed at understanding the role of composition, intercalation, and high pressure on the structural evolution of black phosphorous (BP) and layered arsenic phosphorous alloys, As y P 1-y . Under normal conditions, BP is the most stable phase of phosphorous, known as the α-phase, characterized by an orthorhombic honeycomb puckered crystal structure with the Cmca space group. On the other hand, the most stable phase of arsenic is its β-phase, known as gray arsenic (g-As), which has a rhombohedral buckled layered crystal structure with the R3m space group. In a wide range of compositions (y < 0.83), the arsenic phosphorous alloys form the α-phase, known as black arsenic phosphorous (b-As y P 1-y ) with a similar structure to BP. The project was aimed at the synthesis of BP and b-As y P 1-y with different compositions and at studying the structural evolution of these materials during intercalation with alkali metal (especially Li), and under high-pressure conditions. The main goals were to gain a better understanding of these processes and structural changes taking place under these conditions. In particular, the project was aimed at addressing whether such conditions could induce a structural transition between the α- and β-phases. For this, a series of systematic in-situ studies were conducted, including electrochemical lithium intercalation in an in-situ electrochemical cell, and high-pressure experiments in a diamond anvil cell (DAC). Overall, both types of experiments have shown that above a certain composition-dependent threshold level of intercalation or high pressure, the system undergoes phase segregation rather than phase transition. Specifically, the segregation of the excess arsenic was observed, and a single-phase system of b-As y P 1-y transformed into a two-phase system consisting of b-As y P 1-y and g-As, through the following process: 1∗(b-As y P 1-y ) → 1∗(b As y-δ P 1-y ) + δ∗(g-As). Also, the study showed that intercalation and high-pressure are two competing rather than synergistic processes causing at least a partial cancelation of these two factors

36 MATERIALS SCIENCE↗
NASA NTRS1972

Comparison of NASTRAN and STARDYNE static analysis of a graphite fiber reinforced plastic truss structure

A static and buckling analysis of the ATS-F&G spacecraft reflector support truss (RST) and bridge truss assembly using NASTRAN was conducted. The RST is fabricated from a new material, graphite fiber reinforced plastic. A comparison is made with the NASTRAN results and the results of a similar analysis conducted using the stardyne program. The results of an actual static load test are also compared.

Honeycutt, G. H.↗
NASA NTRS2024

Test and Analysis of the 8-foot Diameter Cylindrical Sandwich Composite Test Article CTA8.2B: As part of the NASA Engineering and Safety Center Shell Buckling Knockdown Factor Project

The buckling response of thin-walled cylindrical structures have long been shown to be sensitive to various imperfections. That is, imperfections related to load introduction, boundary conditions, material property variation, and geometric deviations can all contribute to experimentally obtained buckling loads being lower than the buckling loads predicted for perfect representations of the same thin-walled cylindrical structure. To account for the influence of geometry-based imperfections of a thin-walled cylindrical structure on buckling response, a design factor (also known as a buckling knockdown factor) is used during the design phase. Guidelines for buckling knockdown factors are readily available in NASA SP-8007, Buckling of Thin Walled Circular Cylinders, which was updated in 2020. Prior to this recent update, NASA SP-8007 had not been updated since 1969, and since that time, computational analysis, experimental testing, and manufacturing methods have significantly improved. The NASA Engineering and Safety Center (NESC) Shell Buckling Knockdown Factor Project (SBKF, NESC Assessment 07-010-E) had the goal of developing buckling design recommendations for select classes of metallic and composite launch-vehicle structures [3]. Specifically, the test and analysis results from the fourth SBKF composite test article SBKF-P3-CYL-CTA8.2B, which is referred to as CTA8.2B, are described in this paper. This test was the fourth in a series of four tests on sandwich composite cylinders that will be used to experimentally validate analysis methods, which in turn can be used to develop new analysis-based shell buckling design guidelines for typical sandwich composite launch vehicle cylindrical structures. Publications describing previous test validation with analysis are available in Refs. CTA8.2B was designed to occupy one corner of the design space with approximately equal bending stiffnesses in the axial and transverse directions and have a larger ratio of radius to effective shell thickness. Each test article had a unique design and was designed to occupy a specific region of the design space. CTA8.2B was an 8-foot diameter honeycomb-core sandwich cylinder that was fabricated and tested at the NASA Marshall Space Flight Center (MSFC). The primary objectives of this test were to interrogate the structural capability of a composite test article, and to verify the test article design and analysis approach for cylinders subjected to axial compression and combined axial and bending loads. First, descriptions of the test article design and test are given in Section 2.0, and modeling and analysis methods used in support of the test article design and testing activities are described briefly in Section 3.0. Then, select test results are presented and compared to predicted results in Section 4.0, and concluding remarks are presented in Section 5.0. Finally, drawings of CTA8.2B and references used to support the test and analysis are provided in the Appendix.

Nonlinear analysis↗
NASA NTRSDate not supplied

Design and Analysis of the Rocket Experiment Demonstration of a Soft X-Ray (REDSoX) Polarimeter Mirror Module Assembly

The Rocket Experiment Demonstration of a Soft X-ray (REDSoX) Polarimeter is a NASA sounding rocket experiment that is designed to demonstrate the technology necessary for measuring linear X-ray polarization as a function of energy below 1 keV. In astrophysics, soft X-ray spectropolarimetry will be used to probe the nature of acceleration mechanisms in quasar jets and to test models of neutron star structure. NASA Marshall Space Flight Center (MSFC) has designed a grazing-incidence mirror module assembly (MMA) for the REDSoX payload and used Finite Element Modelling Software (ANSYS) to perform structural analysis of the design. In this paper we will describe the overall design of the REDSoX MMA, details of the analysis techniques used for predicting factor of safety in the mirror adhesive bonds and structural components, the buckling analysis of the outer housing, and the raytrace technique used to estimate the effect of gravity sag on optical performance during ground testing.

Structural Analysis↗
NASA NTRS1982

A nonlinear structural concept for compliant walls

Two mechanisms of drag reduction for flow over flat plates were investigated. The first mechanism employs Bushnell's hypothesis that compliant walls produce drag reduction by interfering with the formation of the turbulent spots in a turbulent boundary layer. It is shown that the amplitudes and frequencies of compliant wall motions for drag reduction might be achieved by using slightly curved walls and the resulting large amplitude motions of snap buckling. A simple structural model of an arch is used in the analysis, and an asymptotic method is developed. The required wall motions can be obtained by using materials like mylar. In addition, the delay of transition from laminar to turbulent flow by driven walls was studied for Poiseuille channel flow. The walls are driven by a periodic traveling wave. A significant increase in the transitional Reynolds number is obtained by appropriately prescibing the wavelength and phase velocity of the wall motion. Previously developed asymptotic methods are used in the analysis.

Reiss, E. L.↗