Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solubility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Designing a Block Copolymer Membrane for Selective Transport of Lactic Acid from Aqueous Mixtures

We report the design and synthesis of a triblock copolymer-based membrane for enabling selective transport of lactic acid from aqueous solutions. This is relevant to the production of polylactic acid, one of the few biodegradable and biobased polymers with sufficient mechanical strength for practical applications. The end blocks are positively charged with negatively charged lactate counterions. The middle block is polybutadiene (PBD). Due to microphase separation, the charged blocks form channels for transporting lactic acid. The mechanical integrity of the membrane is controlled by cross-linking the PBD block. Transport of lactic acid and water across the membrane was studied by placing the membrane between two chambers, a feed chamber containing aqueous lactic acid solutions, and a receiving chamber containing pure water. The lactic acid concentration in the receiving chamber was monitored as a function of time using conductivity, HPLC, and NMR. The corresponding flux of water from the receiving chamber to the feed chamber was measured using an NMR-based approach. The lactic acid and water permeabilities through our membrane were (1.12 ± 0.05) × 10–8 and (8.58 ± 0.75) × 10–9 cm2 s–1. To our knowledge, there are no reports of lactic acid permeabilities through any membrane in the literature. The separation factor of our membrane, αLA/water, 1.305 ± 0.123, is comparable to that of membranes used for selective transport of ethanol, despite the fact that lactic acid is a much larger molecule than ethanol. Selective transport of lactic acid in our membrane is governed mainly by differences in solubility; lactic acid is 18 times more soluble in the membrane than water.

Jana, Rounak↗
DOE OSTI2026

Conductivity-Driven Origin of the Limiting Current in Concentrated Electrolytes

Next-generation electrolyte materials are hindered by their ability to support high currents essential for fast-charge and high-power battery applications. The maximum current supported by an electrolyte, the limiting current, is dictated by the formation of concentration gradients across the electrolyte under an electric field. Most of the literature attributes the onset of the limiting current in concentrated electrolytes to the salt concentration at the positive electrode approaching the solubility limit. Here, in this study, we leverage operando X-ray transmission imaging to measure spatiotemporal salt concentration profiles of a polymer electrolyte in a lithium–indium symmetric cell at a current exceeding the limiting current. The measurement of concentration profiles enables mapping the spatiotemporal electric potential, which comprises an ohmic contribution, governed by conductivity, and an overpotential related to maintaining concentration gradients. We find that a precipitous drop in conductivity at the positive electrode drives the divergence of electric potential, rather than a thermodynamic solubility limit.

Abdo, Emily E. [University of California, Berkeley↗
DOE OSTI2025

C10-Benzoate Esters of Anhydrotetracycline Inhibit Tetracycline Destructases and Recover Tetracycline Antibacterial Activity

Tetracyclines (TCs) are an important class of antibiotics threatened by enzymatic inactivation. These tetracycline-inactivating enzymes, also known as tetracycline destructases (TDases), are a subfamily of class A flavin monooxygenases (FMOs) that catalyze hydroxyl group transfer and oxygen insertion (Baeyer–Villiger type) reactions on TC substrate scaffolds. Semisynthetic modification of TCs (e.g., tigecycline, omadacycline, eravacycline, and sarecycline) has proven effective in evading certain resistance mechanisms, such as ribosomal protection and efflux, but does not protect against TDase-mediated resistance. Here, we report the design, synthesis, and evaluation of a new series of 22 semisynthetic TDase inhibitors that explore D-ring substitution of anhydrotetracycline (aTC) including 14 C10-benzoate ester and eight C9-benzamides. Overall, the C10-benzoate esters displayed enhanced bioactivity and water solubility compared to the corresponding C9-benzamides featuring the same heterocyclic aryl side chains. The C10-benzoate ester derivatives of aTC were prepared in a high-yield one-step synthesis without the need for protecting groups. The C10-esters are water-soluble, stable toward hydrolysis, and display dose-dependent rescue of tetracycline antibiotic activity in E. coli expressing two types of tetracycline destructases, represented by TetX7 (Type 1) and Tet50 (Type 2). The best inhibitors recovered tetracycline antibiotic activity at concentrations as low as 2 μM, producing synergistic scores <0.5 in the fractional inhibitory concentration index (FICI) against TDase-expressing strains of E. coli and clinical P. aeruginosa. The C10-benzoate ester derivatives of aTC reported here are promising new leads for the development of tetracycline drug combination therapies to overcome TDase-mediated antibiotic resistance.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Tuning the Selectivity of Carboxylic Acid–Based Eutectic Solvents for the Dissolution and Electrochemical Separation of Metal Oxides

Extracting metals from natural resources and recovering from waste materials with less-hazardous solvents is essential for sustainable technological advancements. The commonly employed method utilizes harsh chemicals for metal dissolution and the ensuing separation. Here, in this study, we examined the potential of eutectic solvents (types III and IV) as alternative media for the selective dissolution of metals and metal oxides and their subsequent electrochemical separation. Notably, type III eutectics composed of betaine:acetic acid and triazole:lactic acid exhibited excellent solubility for cobalt oxide (24.1 g·L –1 ) and copper oxide (30.5 g·L –1 ), respectively. In comparison, the type IV eutectic mixture of Ca(NO 3 ) 2 ·4H 2 O:acetic acid demonstrated the highest conductivity and lowest viscosity with solubility for both copper oxide (6.1 g·L –1 ) and metallic copper (5.4 g·L –1 from a used electronic circuit). Using a Ca(NO 3 ) 2 ·4H 2 O:acetic acid mixture, copper was selectively dissolved from a waste printed circuit board and subsequently electrodeposited onto a nickel electrode. These findings highlight the tunability of DESs for the selective recovery of metals from electronic waste, offering a promising approach for sustainable metal recycling and resource recovery.

electrodeposition↗
DOE OSTI2024

Modeling Interactive Effects of Manganese Bioavailability, Nitrogen Deposition, and Warming on Soil Carbon Storage

Manganese (Mn) is a redox–active micronutrient that has been shown to accelerate plant litter decomposition; however, the effect of Mn–promoted decomposition on soil C storage is unclear. We present a novel biogeochemical model simulating how Mn bioavailability influences soil organic C (SOC) stocks in a soil profile (<50 cm) within a temperate forest. In our model, foliar Mn increased in response to increasing soluble Mn released through Mn–oxide (birnessite) dissolution in mineral soil layers. The ensuing Mn enrichment in leaf litter redistributed Mn to the surface forest floor layer, promoted enzymatic oxidation of lignin, and decreased SOC stocks. Total SOC loss was partially mitigated by accumulation of lignin–oxidation products as mineral–associated organic C. We also explored how Mn–driven changes to C storage interacted with effects of N deposition and warming. Nitrogen enrichment inhibited Mn–dependent lignin degradation, increasing SOC stocks and weakening their dependence on Mn bioavailability. Warming stimulated decomposition and reduced C stocks but was less effective at low Mn bioavailability. Our model results suggest that SOC stocks are sensitive to Mn bioavailability because increased plant uptake redistributes Mn to surface soils where it can enhance litter decomposition. Finally, based on our simulations, we predict that Mn becomes limiting to litter decomposition where Mn is poorly soluble. Depletion of bioavailable Mn or other cofactors that are critical to decomposition could limit the response of organic C stocks to warming over time, but quantitative projections of the role of Mn bioavailability in regulating decomposition requires additional measurements to constrain model uncertainties.

58 GEOSCIENCES↗
DOE OSTI2026

Challenges of conventional iterative all-atom and coarse-grained multiscale molecular dynamics

In this work, we evaluate the biomolecular dynamics behaviors when conventionally iterating between all-atom (AA) and coarse-grained (CG) molecular dynamics (MD) simulations over multiple cycles. We implemented the workflow to iterate between AA and CG in OpenMM, namely the iterative multiscale MD (iMMD) simulation workflow. In particular, we aim to identify practical applications for iterating between AA and CG simulations in a conventional manner without any constraints or model modifications. We evaluate the iMMD workflow on four representative systems, spanning folding of two soluble proteins and protein-protein as well as protein-lipid interactions of two membrane proteins. We observe that iteration between AA and CG representations could help the soluble proteins exit undesirable metastable states to fold, resulting from random protein structural distortions due to cycling. Consequently, the most reliable use of iterative AA and CG simulations appears to be to accelerating complex lipid mixing for membrane-bound protein systems rather than sampling protein conformational space. Our work explores the practical usages and limitations for iterative AA and CG simulations using readily available AA and CG force fields. The evaluated iMMD workflow in OpenMM is made available at https://github.com/lanl/iMMD.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Reactive capture and electrochemical conversion of CO 2 with ionic liquids and deep eutectic solvents

Ionic liquids (ILs) and deep eutectic solvents (DESs) have tremendous potential for reactive capture and conversion (RCC) of CO 2 due to their wide electrochemical stability window, low volatility, and high CO 2 solubility. There is environmental and economic interest in the direct utilization of the captured CO 2 using electrified and modular processes that forgo the thermal- or pressure-swing regeneration steps to concentrate CO 2 , eliminating the need to compress, transport, or store the gas. The conventional electrochemical conversion of CO 2 with aqueous electrolytes presents limited CO 2 solubility and high energy requirement to achieve industrially relevant products. Additionally, aqueous systems have competitive hydrogen evolution. In the past decade, there has been significant progress toward the design of ILs and DESs, and their composites to separate CO 2 from dilute streams. In parallel, but not necessarily in synergy, there have been studies focused on a few select ILs and DESs for electrochemical reduction of CO 2 , often diluting them with aqueous or non-aqueous solvents. The resulting electrode–electrolyte interfaces present a complex speciation for RCC. In this review, we describe how the ILs and DESs are tuned for RCC and specifically address the CO 2 chemisorption and electroreduction mechanisms. Critical bulk and interfacial properties of ILs and DESs are discussed in the context of RCC, and the potential of these electrolytes are presented through a techno-economic evaluation.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Quantitative insights for diagnosing performance bottlenecks in lithium–sulfur batteries

Lithium–sulfur (Li–S) batteries hold significant promise for electric vehicles and aviation due to their high energy density and cost-effectiveness. However, understanding the root causes of performance degradation remains a formidable challenge, as the interplay of multiple factors obscures key failure mechanisms. A major limitation has been the inability to quantify soluble sulfur species within practical detection limits accurately and to correlate electrochemical processes with associated physical inventory changes. Here, we introduce the high-performance liquid chromatography-ultraviolet spectroscopy and gas chromatography sequential characterization (HUGS) toolkit, capable of precisely quantifying seven distinct sulfur and polysulfide species at concentrations as low as 40 ppb. HUGS has been successfully applied to practical coin and pouch cells without requiring cell modification. Furthermore, our self-developed software, Dr HUGS, enhanced the data analysis speed by over 30 times, enabling multi-source data integration and delivering comprehensive analysis results within minutes. Using HUGS, we identify significant capacity losses from inactive lithium and sulfur during initial cycles and sulfide-rich solid–electrolyte interphase (SEI) formation on the anode during later cycles. Notably, our findings reveal that soluble polysulfides have minimal contributions to capacity loss, challenging long-standing assumptions. Moreover, HUGS demonstrates that constant-pressure setups in Li–S pouch cells improve compositional uniformity compared to constant-gap configurations. For sulfurized polyacrylonitrile (SPAN) cathodes, unique issues such as non-sulfide SEI formation and lithium pulverization are observed, which can be mitigated through localized high-concentration electrolytes to enhance lithium inventory retention. By enabling precise quantification of critical inventory components, HUGS provides transformative insights into failure mechanisms across various electrolytes and cathode chemistries, guiding rational design strategies for next-generation energy storage systems.

25 ENERGY STORAGE↗
DOE OSTI2025

Investigation of electrode passivation during oxidation of a nitroxide radical relevant for flow battery applications

Nitroxide-radicals such as 2,2,6,6-tetramethylpiperidin-1-oxyl (TEMPO) and their derivatives have gained interest as redox-active organic molecules for applications in grid-scale energy storage. In particular, the higher solubility of 4-hydroxy-TEMPO in aqueous media greatly improves its energy density, but unusual kinetics associated with its surface-mediated electrooxidation have limited further development. Here, the apparent passivation behavior of species formed during 4-hydroxy-TEMPO electrooxidation in concentrated electrolytes is investigated. A combination of surface microscopy, X-ray photoelectron spectroscopy, and quartz-crystal gravimetry confirms the formation of a polymeric-type layer over the electrode surface composed of 4-hydroxy-TEMPO-like subunits, which is otherwise not observed with TEMPO. This study indicates that the design of high energy density and stable TEMPO-based redox molecules must also consider the reactivity that may occur due to the molecular characteristics of solubility-enhancing moieties. It is found that the extent of passivation is dependent on the voltage scan rate and 4-hydroxy-TEMPO concentration, underscoring the importance of studying materials at conditions relevant for their proposed applications. Evidence of incomplete passivation and an electrode self-cleaning process is presented, suggesting a materials design strategy to mitigate surface passivation from side reactions that may occur in redox active materials for energy storage applications.

Buchanan, Cailin [Argonne National Laboratory (ANL↗
DOE OSTI2026

Activating magnetite ores for aqueous ironmaking at high current densities

Low-temperature electrochemical cells reducing iron oxides to metal in alkaline electrolytes can support fully electrified steelmaking processes. Previous studies on these cells have primarily focused on high-surface-area hematite, Fe 2 O 3 , reactants whereas attempts to reduce suspensions of magnetite, Fe 3 O 4 —one of the two feedstocks for existing ironmaking reactors—have generally been limited to low rates of reaction (<30 mA cm −2 ). Here, in this study, we control the crystalline domain size of Fe 2 O 3 and Fe 3 O 4 particles in 10 M NaOH electrolytes to study how the nanoscale morphology of oxides controls the rate of electrochemical ironmaking. Rotating-ring disk electrode measurements of Fe 2+ , in situ Raman spectroscopy of the electrode surface, and ex situ electron microscopy were consistent with a hypothesized passivation process at Fe 3 O 4 surfaces that may prevent the continuous formation of soluble intermediates. Sufficiently small (<100 nm diameter) oxide particles yielded Fe partial current densities >160 mA cm −2 , a fivefold increase relative to previously reported rates for Fe 3 O 4 suspensions and comparable to active Fe 2 O 3 . Electron microscopy revealed that electrodeposited films were composed of micron-scale crystalline Fe domains with a porous film of Fe 3 O 4 nanoparticles and supports a model where Fe is grown primarily from soluble Fe 2+ intermediates. Based on these insights, inactive blast-furnace-grade iron-oxides were transformed into high surface area nanoparticles (1.6 to 229.2 m 2 g −1 ) via reprecipitation, leading to a ninefold enhancement in faradaic efficiency and an Fe partial current density of 120 mA cm −2 . When integrated with chlor-iron cells producing reagents for reprecipitation, this approach could lead to a cost-competitive process for electrochemical ironmaking from industrially relevant feedstocks.

TEM↗
DOE OSTI2024

Molecular dynamics simulations of uranyl and plutonyl cations in a task-specific ionic liquid

Ionic liquids (ILs) are a unique class of solvents with potential applications in advanced separation technologies relevant to the nuclear industry. ILs are salts with low melting points and a wide range of tunable physical properties, such as viscosity, hydrophobiciy, conductivity, and liquidus range. ILs have negligible vapor pressure, are often non-flammable, and can have high thermal stability and a wide electrochemical window, making them attractive for use in separations processes relevant to the nuclear industry. Metal salts generally have a low solubility in ILs; however, by incorporating new functional groups into the IL cation or anion that promote complexation with the metal, the solubility can be greatly increased. One such task-specific ionic liquid (TSIL) is 1-carboxy-N, N, N-trimethylglycine bis(trifluoromethylsulfonyl)imide ([Hbet][Tf 2 N]). Water, which is detrimental for electrochemical separations, is a common impurity in ILs and can coordinate with actinyl cations, particularly in ILs containing only weakly coordinating components. Understanding the behavior of actinides in TSIL/water mixtures on a molecular level is vital for designing improved separations processes. Classical molecular dynamics simulations of uranyl(VI) and plutonyl(VI) in 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][Tf 2 N]) with deprotonated Hbet (betaine) and water have been performed to understand the coordination and dynamics of the actinyl cations. We find that betaine is a much stronger ligand than water and prefers to coordinate the metal in a bidentate manner. Potential of mean force simulations yield a relative free energy for betaine coordination of approximately -120 to -90 kJ/mol in mixtures with water. As the amount of betaine coordinated to the actinide increases, the diffusion coefficient of the actinyl cation decreases. Moreover, the betaine ligand is able to bridge between two metal centers, resulting in dimeric complexes with actinide–actinide distances of ~5 Å. Potential of mean force simulations show that these structures are stable, with relative free energies of up to -40 kJ/mol. The crystal structure for [(UO 2 ) 2 (bet) 6 (H 2 O) 2 ][Tf 2 N] 4 shows that the betaine bridges between two uranium atoms to form dimeric complexes similar to those found in our simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Elucidating and contrasting the mechanisms for Mg and Ca sulfate ion-pair formation with multi-level embedded quantum mechanics/molecular dynamics simulations

Here, solutions and minerals containing sulfate (SO 4 2- ), and Ca 2+ and Mg 2+ cations, are ubiquitous throughout the lithosphere and are significant components of seawater, thus presenting a prototypical system for the study of strong electrolytes and crystal nucleation mechanisms. However, despite their relative abundance, key questions remain unanswered about the most fundamental atomic-level steps of their mineralization pathways and aqueous dynamics. Here, we carry out enhanced sampling multi-level molecular dynamics (MD) embedded correlated wavefunction theory simulations to elucidate ion-pairing mechanisms for Mg–SO 4 and Ca–SO 4 in concentrated aqueous solution, accurately capturing effects arising from both structural dynamics and electron exchange–correlation. We predict contact-ion-pair formation to be barrierless and highly exoergic for Ca–SO 4 , in agreement with its minimal solubility, whereas for Mg–SO 4 , solvent-shared and contact ion pairs have similar free energies, qualitatively consistent with its higher solubility. Finally, we demonstrate that brief high-temperature pre-equilibration may be utilized to accelerate convergence of free energies in blue-moon-ensemble enhanced-sampling MD.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Techno-Economic Analysis of Gas-Liquid Contactors for Tritium Extraction from Lead-Lithium

To enable a sustainable fuel cycle, any deuterium-tritium fusion reactor must breed its tritium fuel onsite. Lead-lithium (PbLi), a eutectic metal, is a leading liquid breeder material for tritium generation. One challenge with PbLi blanket technology is the extraction of tritium from the molten eutectic. Three technologies are the focus of worldwide research: the vacuum permeator, the vacuum sieve tray, and the gas-liquid contactor (GLC). The present work offers a methodology for designing, sizing, optimizing, and costing a trickle-bed GLC. Here, we analyzed tritium extraction from PbLi using MELODIE experimental data by applying traditional packed bed mass transfer efficiency models along with supplementary models, like film theory. Our analysis revealed that traditional packed bed mass transfer efficiency models do not fit the MELODIE loop experimental data. Moreover, uncertainty in PbLi solubility resulted in a 325-fold increase in required gas flow rates when comparing identical packing heights. The film theory liquid mass transfer coefficient, Delt-Olujic wettability model, and Reiter tritium solubility values fit the MELODIE data best and were used both in the design and to conduct the economic analysis. Techno-economic analysis of the GLC was performed to evaluate three design sizes, all achieving a minimum extraction efficiency of 90 [%] for a total tritium extraction of 31 [kg/yr].

Fusion Fuel Cycle↗
DOE OSTI2026

A nitrate transporter 1/peptide transporter family gene impacts nitrogen homeostasis and phenylpropanoid production in hybrid poplar

In plants, nitrogen and carbon metabolism are tightly interconnected, and nitrogen availability often negatively correlates with phenylpropanoids that are associated with xylem formation and stress responses. A nitrate transporter 1/peptide transporter (NRT1/PTR) family (NPF) gene (PtNPF6.1), which is expressed in the vasculature, was previously found to have a genetic association with the variation in syringyl lignin content in poplar trees (Populus trichocarpa). PtNPF6.1 belongs to an evolutionarily distinct NPF superfamily with limited taxonomic distribution. RNAi-mediated suppression of PtNPF6.1 led to increases in total foliar nitrogen and amino acids related to nitrogen transport and storage in source leaves. There was also a concomitant decrease in soluble phenolics, including attenuated stress-induced production of anthocyanins and condensed tannins. The proportions of syringyl and p-hydroxyphenyl units in lignin were slightly but significantly decreased in down-regulated lines grown under high nitrogen conditions, while there was an increase in the level of ester-linked p-hydroxybenzoate groups. Together, these results suggest that PtNPF6.1 is involved in maintaining internal nitrogen homeostasis in trees, indirectly impacting the production of nitrogen-free phenolics including lignin and soluble secondary metabolites.

amino acids↗
DOE OSTI2026

Evolutionary constraints and climate variability jointly shape starch–sugar balance in woody plants

Nonstructural carbohydrates (NSC) buffer plants against carbon imbalances, yet their partitioning between storage and soluble pools remains elusive at global scales. Here, we compiled a dataset of starch to soluble sugar ratio (St : Su) for 308 woody species across 220 sites world-wide and introduce a dimensionless index that integrates storage and demand while minimizing methodological artifacts. St : Su was strongly associated with growth, identifying it as a key axis of carbon allocation. Foliage consistently exhibited lower St : Su than lignified organs, reflecting a division between transient and conservative pools. Conifers accumulated more starch in foliage but less in stems relative to angiosperms, while leaf habits and mycorrhizal associations further modulated organ-specific strategies. Contrary to expectation, foliar and root St : Su varied little among biomes, but stems exhibited higher ratios in tropical rainforests than in boreal or arid regions, reflecting differences in species composition and adaptive storage under disturbance. Phylogeny constrained stem storage, whereas climatic variability, rather than mean conditions, dominated allocation in leaves and roots. These findings establish St : Su as a robust functional trait linking allocation strategies, growth, and resilience, which can be used to improve vegetation model prediction of forest productivity and mortality under climate variability.

Li, Weibin [Lanzhou Univ. (China)] (ORCID:00000001↗
DOE OSTI2024

Low pH Titanium Electrochemistry in the Presence of Sulfuric Acid and its Implications for Redox Flow Battery Applications

Titanium (Ti) is a promising elemental redox active species for redox flow batteries (RFBs) due to its 100x availability in the Earth crust, and 10x lower cost (compared to elemental vanadium). Furthermore, Ti salts are highly soluble in water and concentrations >5 M can be easily obtained. Seeking to harness the higher solubility (and hence energy density) of the Ti electrolyte for flow battery applications, the Ti 4+ /Ti 3+ redox couple was investigated at high concentrations (up to 5 M) relevant to RFB applications. The behavior of Ti ions in H 2 SO 4 supported electrolytes was investigated by varying the ratio of Ti redox active species to counterion. The electrochemical characteristics, transport properties, and redox kinetics of the Ti 4+ /Ti 3+ redox couple were measured and the impact of the Ti x+ to solvating ligand ratio was examined. The coordination structures around solvated Ti x+ ions were spectroscopically determined and the effect of solvation structure on the Ti 3+ /Ti 4+ redox rate constants were examined and correlated to the calculated solvation energy (hence distinguishing between inner- and outer-sphere processes) and the role of catalysts was addressed. The Ti electrolyte development guidelines presented herein will advance the development of Ti-based RFBs as a promising pathway towards cost effective, grid-scale energy storage.

Electrochemistry↗
DOE OSTI2024

NANO.PTML model for read-across prediction of nanosystems in neurosciences. computational model and experimental case of study

Abstract Neurodegenerative diseases involve progressive neuronal death. Traditional treatments often struggle due to solubility, bioavailability, and crossing the Blood-Brain Barrier (BBB). Nanoparticles (NPs) in biomedical field are garnering growing attention as neurodegenerative disease drugs (NDDs) carrier to the central nervous system. Here, we introduced computational and experimental analysis. In the computational study, a specific IFPTML technique was used, which combined Information Fusion (IF) + Perturbation Theory (PT) + Machine Learning (ML) to select the most promising Nanoparticle Neuronal Disease Drug Delivery (N2D3) systems. For the application of IFPTML model in the nanoscience, NANO.PTML is used. IF-process was carried out between 4403 NDDs assays and 260 cytotoxicity NP assays conducting a dataset of 500,000 cases. The optimal IFPTML was the Decision Tree (DT) algorithm which shown satisfactory performance with specificity values of 96.4% and 96.2%, and sensitivity values of 79.3% and 75.7% in the training (375k/75%) and validation (125k/25%) set. Moreover, the DT model obtained Area Under Receiver Operating Characteristic (AUROC) scores of 0.97 and 0.96 in the training and validation series, highlighting its effectiveness in classification tasks. In the experimental part, two samples of NPs (Fe 3 O 4 _A and Fe 3 O 4 _B) were synthesized by thermal decomposition of an iron(III) oleate (FeOl) precursor and structurally characterized by different methods. Additionally, in order to make the as-synthesized hydrophobic NPs (Fe 3 O 4 _A and Fe 3 O 4 _B) soluble in water the amphiphilic CTAB (Cetyl Trimethyl Ammonium Bromide) molecule was employed. Therefore, to conduct a study with a wider range of NP system variants, an experimental illustrative simulation experiment was performed using the IFPTML-DT model. For this, a set of 500,000 prediction dataset was created. The outcome of this experiment highlighted certain NANO.PTML systems as promising candidates for further investigation. The NANO.PTML approach holds potential to accelerate experimental investigations and offer initial insights into various NP and NDDs compounds, serving as an efficient alternative to time-consuming trial-and-error procedures.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Structural features of xylan dictate reactivity and functionalization potential for bio-based materials

Plant-based materials have the potential to replace some petroleum-based products, offering compostability and biodegradability as critical advantages. Xylan-rich biomass sources are gaining recognition due to their abundance and underutilization in current industrial applications. Research of potential xylan applications has been complicated by the complex and heterogeneous structure that varies for different xylan feedstocks. Acylation is a broadly used reaction in functionalization of polysaccharides at an industrial scale. However, the efficiency of this reaction varies with the xylan source. To optimize xylan valorization, a systematic understanding of structure–reactivity relationships is essential. This study explores, characterizes, and compares various xylan feedstocks in the acylation process. Xylan feedstocks were analyzed for their chemical composition, degree of polymerization, branching, solubility, and presence of impurities. These features were correlated with xylan glycotypes’ reactivity toward functionalization with succinic anhydride in an optimized DMSO/KOH condition, achieving carboxyl contents of up to 1.46. We used principal component analysis and hierarchical clustering to identify key structural features of xylan that promote its reactivity. Our findings reveal that xylans with higher xylose content and lower degrees of branching exhibit enhanced reactivity, achieving higher carboxyl content and yields. Structural analyses confirmed successful modification, and light scattering analyses showed dramatic changes in the solution properties. Succinylation improves the solubility and film-forming properties of native xylans. This study shows key structure–reactivity relationships in xylan succinylation, establishing that low branching, high xylose content, and reduced lignin impurity enhance chemical functionalization. The results offer a framework for selecting optimal biomass feedstocks and support future efforts in genetic and synthetic biology to design plants with tunable xylan architectures. These findings advance the hemicellulose valorization for applications in coatings and packaging.

Acylation↗