Results for “sludge process” — Page 9

DOE OSTI2025

CRADA Final Report: CRADA Number NFE-22-09311 with Agriwater Tech

Livestock wastewater management is a critical concern in the United States, with an annual production of approximately 1.37 billion tons of waste, surpassing human waste by three to twenty times. The mismanagement of manure wastewater poses significant threats to freshwater sources, ecosystems, and public health. Through this project, we proposed an innovative solution using electrocoagulation (EC) treatment. The EC technique is an electrochemical process involving the intentional corrosion of aluminum and iron electrodes to introduce trivalent ions into the solution, facilitating the co-precipitation and coagulation of contaminants and making the removal of water from sludge easier. The project's primary objective is to use EC to convert liquid animal manure into clean water for farm irrigation, drinking, and maintenance. This solution is vital for various farms including those facing drought, pursuing zero-discharge, and seeking Environmental Protection Agency (EPA) permits for livestock farm manure discharge into rivers. Preliminary research shows EC's potential to significantly reduce turbidity and phosphate levels in livestock wastewater, forming the basis for scalable onsite treatment. The goal of this proposed project is to develop an innovative farm-wastewater-treatment process to achieve clean water, fertilizer, and reduced greenhouse gases through electrification of current processes such as coagulation, dewatering, inactivation of viruses and bacteria, and filtration for recycling surface water from farm lagoons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

CRADA Final Report: CRADA Number NFE-22-09311 with Agriwater Tech

Livestock wastewater management is a critical concern in the United States, with an annual production of approximately 1.37 billion tons of waste, surpassing human waste by three to twenty times. The mismanagement of manure wastewater poses significant threats to freshwater sources, ecosystems, and public health. Through this project, we proposed an innovative solution using electrocoagulation (EC) treatment. The EC technique is an electrochemical process involving the intentional corrosion of aluminum and iron electrodes to introduce trivalent ions into the solution, facilitating the co-precipitation and coagulation of contaminants and making the removal of water from sludge easier. The project's primary objective is to use EC to convert liquid animal manure into clean water for farm irrigation, drinking, and maintenance. This solution is vital for various farms including those facing drought, pursuing zero-discharge, and seeking Environmental Protection Agency (EPA) permits for livestock farm manure discharge into rivers. Preliminary research shows EC's potential to significantly reduce turbidity and phosphate levels in livestock wastewater, forming the basis for scalable onsite treatment. The goal of this proposed project is to develop an innovative farm-wastewater-treatment process to achieve clean water, fertilizer, and reduced greenhouse gases through electrification of current processes such as coagulation, dewatering, inactivation of viruses and bacteria, and filtration for recycling surface water from farm lagoons.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1995

Assessment of pollution prevention and control technology for plating operations

The National Center for Manufacturing Sciences (NCMS) is sponsoring an on-going project to assess pollution prevention and control technology available to the plating industry and to make this information available to those who can benefit from it. Completed project activities include extensive surveys of the plating industry and vendors of technologies and an indepth literature review. The plating industry survey was performed in cooperation with the National Association of Metal Finishers. The contractor that conducted the surveys and prepared the project products was CAI Engineering. The initial products of the project were made available in April, 1994. These products include an extensive report that presents the results of the surveys and literature review and an electronic database. The project results are useful for all those associated with pollution prevention and control in the plating industry. The results show which treatment, recovery and bath maintenance technologies have been most successful for different plating processes and the costs for purchasing and operating these technologies. The project results also cover trends in chemical substitution, the identification of compliance-problem pollutants, sludge generation rates, off-site sludge recovery and disposal options, and many other pertinent topics.

Chalmer, Paul D.↗

DOE OSTI2023

Urban mining from biomass, brine, sewage sludge, phosphogypsum and e-waste for reducing the environmental pollution: Current status of availability, potential, and technologies with a focus on LCA and TEA

We discuss how rapid industrialization, improved standards of living, growing economies and ever-increasing population has led to the unprecedented exploitation of the finite and non-renewable resources of minerals in past years. It was observed that out of 100 BMT of raw materials processed annually only 10% is recycled back. This has resulted in a strenuous burden on natural or primary resources of minerals (such as ores) having limited availability. Moreover, severe environmental concerns have been raised by the huge piles of waste generated at landfill sites. To resolve these issues, ‘Urban Mining’ from waste or secondary resources in a Circular Economy’ concept is the only sustainable solution. The objective of this review is to critically examine the availability, elemental composition, and the market potential of the selected secondary resources such as lignocellulosic/algal biomass, desalination water, sewage sludge, phosphogypsum, and e-waste for minerals sequestration. This review showed that, secondary resources have potential to partially replace the minerals required in different sectors such as macro and microelements in agriculture, rare earth elements (REEs) in electrical and electronics industry, metals in manufacturing sector and precious elements such as gold and platinum in ornamental industry. Further, inputs from the selected life cycle analysis (LCA) & techno economic analysis (TEA) were discussed which showed that although, urban mining has a potential to reduce the greenhouse gaseous (GHG) emissions in a sustainable manner however, process improvements through innovative, novel and cost-effective pathways are essentially required for its large-scale deployment at industrial scale in future.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Policy impact on economic and environmental sustainability of anaerobic digestion: Industrial case study Insights

This paper thoroughly examines how policy incentives impact the economic and environmental sustainability of anaerobic digestion (AD) systems. It uses techno-economic and life cycle analyses, along with real industry data, to explore the entire AD process—from feedstock acceptance to digestate disposal. It evaluates the effects of various U.S. policy crediting programs on the economic viability of different AD pathways for treating sewage sludge and food waste. Furthermore, tipping fees are identified as the primary driver of profitability, while policy credits play a crucial role in enhancing economic feasibility, particularly for renewable natural gas production. However, future regulatory changes could reshape this economic landscape. All AD pathways are found to significantly reduce greenhouse gas emissions, though economic outcomes are highly sensitive to digestate disposal costs and feedstock tipping fees. Co-digestion with food waste is proposed as a strategy to reduce dependence on policy credits and improve long-term economic stability.

Anaerobic Digestion↗

DOE OSTI2025

Evaluation of Hanford 200 West Area Tank Farms (241-S/241-SX-/241-U tank farms) Physical Properties Data for Use in Development of West Area Tank Treatment (WATT) Processing

With the recent acceptance of West Area Tank Treatment disposition alternative for 200 West Area tanks at the Hanford Site by the State of Washington and the U.S. Department of Energy, a review was initiated to identify the physical properties data available in the literature for the Hanford 241-S, 241-SX, and 241-U tank farms. The literature reviewed indicated that there is a relatively small set of useful data on physical properties of 200 West Area tanks, and the data that do exist are biased around a narrow range of tank samples. Much of the testing between the 1990s and mid-2010s was intended to support either enhanced sludge washing or feed delivery to the Pretreatment Facility at the Hanford Waste Treatment and Immobilization Plant. As such, some physical properties of 200 West Area samples were measured under conditions that are no longer relevant. Because of the distinctly different nature of many past processes at the 200 West Area compared to the 200 East Area, insight from waste testing in the 200 East Area waste should be used with caution, as there may be significantly different qualities in the physical properties data between these two areas (both in situ and as measured in laboratory analyses). Based on this assessment, there is a need to collect additional physical property data to support planning for 200 West Area retrievals.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2020

Proven Technologies for the Solidification of Complex Liquid Radioactive Waste (LRW): Global Case Studies of Applications and Disposal Options - 20424

Legacy radioactive waste streams from the Cold War still exist and newly generated waste streams from nuclear power plants and research institutes go untreated and expose environmental hazards at many nuclear sites. The nature of the waste is diverse, depending upon the source or the process from which it originated. The most problematic waste streams include complex liquids such as organic (tri-butyl-phosphate TBP) solutions contaminated with Pu and U isotopes, mixed sludge types, high acid radioactive waste, H-3 contaminated organic and aqueous streams, etc. Technological, environmental and economic challenges exist for the treatment and disposal of such waste streams. A proven technology that has been applied to LRW on a global basis provides one option as a low-cost solution to legacy streams and small volume, highly complex LRW frequently found during decommissioning at nuclear power plants and weapons sites. The engineered polymer technology from Nochar, USA, is capable of solidifying standard and highly complex LLW and ILW waste streams for interim or final storage, or for incineration. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2025

In-Tank Processing Using Low Temperature Aluminum Dissolution: Year 1 Progress Report

The Hanford Site stores approximately 56 million gallons of radioactive legacy defense waste in underground tanks. This study investigates the feasibility of utilizing in-tank low-temperature aluminum dissolution to favorably alter the transport properties of aluminum-rich southeast quadrant waste sludges, thereby de-risking sludge delivery for Direct Feed of High-Level Waste. Specifically, this study aims to assess the rate and extent of gibbsite dissolution under various conditions, including different particle sizes (~10 to 90 µm), NaOH concentrations (1 to 6 M), and the presence of specific analytes such as NO 2 - , NO 3 - , and other aluminum-rich waste background analytes, using simulated waste solids and liquids. Experimental tests were designed to highlight the impact of aluminum leaching on simulated waste transport properties, quantified by the just-suspended mixing speed (NJS), and were conducted under well-mixed, turbulent conditions, ensuring full suspension of gibbsite particles using an overhead mixer. The results suggest that the presence of NO 2 - and NO 3 - , in conjunction with leaching at relatively low free hydroxide contents, improved transport requirements (i.e., lowered NJS) for pure gibbsite slurries. These findings will inform the design of potential in-tank processing systems, optimizing aluminum dissolution for improved waste management in the Hanford Tank Farms.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2020

Dissolution of Fluoride Salts in Hanford Tank Waste

The Direct Feed High-Level Waste (DFHLW) strategy seeks to bypass the Hanford Waste Treatment and Immobilization Plant Pretreatment Facility while retaining some processing functions to maximize waste feed loading and minimize high-level waste (HLW) waste volume. The DFHLW flowsheet needs leaching, washing, and solids concentration operations either in new or existing tanks. The effectiveness and efficiency of sludge washing has a substantial impact on DST space, mission duration, and the evaporation and low-activity waste (LAW) treatment operations required by these large wash-water additions. One target species requiring washing is fluoride. The HLW glass composition limits for fluorine drive operations to dissolve fluoride-bearing salts into the LAW fraction and thereby maximize waste loading in HLW glass. The fluoride in many high-level wastes at Hanford is predominantly in the form of fluoride-salt precipitates: villiaumite (NaF), kogarkoite (Na 3 FSO 4 ), and natrophosphate (Na 7 F(PO 4 ) 2 ·19H 2 O). Fluoride produces melter off-gas that creates corrosion risk in the off-gas system piping, while the sulfate and phosphate in the fluoride double salts kogarkoite and natrophosphate can be detrimental to glass waste loading. Fluoride salts are sparingly soluble, with solubilities ranging from approximately 40 to 130 kg per kL of pure water, and the dissolution kinetics of the three fluoride salts are not well known. Unexpected delays in a tank dissolution process could be encountered as a result of the lack of information about dissolution rates. In addition, if the double salts show transient non-stoichiometric dissolution of fluoride versus phosphate or sulfate, unexpectedly high concentrations of one of these other constituents could be produced. Washington River Protection Solutions authorized Pacific Northwest National Laboratory to collect the available data for fluoride salt dissolution rate, provide a scoping estimate of dissolution time if possible, and identify gaps in the understanding and predictive capability for estimating dissolution time. Open literature and Hanford reports were reviewed to document, understand, and (where possible) evaluate limitations on fluoride salt equilibria and dissolution kinetics, including both mass transport and surface reaction rate. Scoping estimates of dissolution time were made for mass-transfer-controlled dissolution of spherical particles of fluoride salts suspended in liquid. This is not the only potential governing mechanism; dissolution could be substantially slower if the surface reaction rate (the rate of release of ions from the surface) is the controlling mechanism. When the minimum amount of water for complete dissolution is used and the slip velocity between the liquid and suspended particles is less than or equal to the terminal settling velocity, the estimated mass-transfer rates allow 0.1 mm particles of fluoride salt to dissolve in minutes at 25 °C in water containing no other dissolved salts. Much larger solids, such as the 6-mm chunks that have been seen in heels, could take a few hours to more than a week to dissolve. The actual dissolution times will depend strongly on the actual slip velocity, the extent of particle suspension, constraint by surface reaction rates, the ratio of solvent to solid, and the presence of common ions that shift the solubility equilibria to restrict dissolution of fluoride salts.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2020

Techno-Economic Analysis of Biofuel Production via Catalytic Upgrading of Carbohydrates in Paper Sludge

A full-plant model was developed using correlations from a rigorous mass and energy balance and based on experimental results to determine the MFSP and its Sensitivity Analysis in the production of a hydrocarbon product from Paper Sludge. In this base case a preliminary MFSP of $5.97/GGE has been determined. This value is higher than the results reported in recent NREL reports. The difference is explained since much larger capacity plants are considered in those reports, and because we are not considering the production of co-products that bring the fuel costs down. The obtained model is being used to guide the next steps in our laboratory work since the team is now aware of which are the more sensitive process parameters "impacting" the MFSP of the final product.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2024

Site-specific Design Case Study for Wet Waste Hydrothermal Liquefaction and Biocrude Upgrading to Hydrocarbon Fuels

Hydrothermal liquefaction (HTL) is a thermal process that converts wet biomass to renewable hydrocarbon fuel blendstocks (i.e., renewable naphtha, renewable diesel, and sustainable aviation fuel (SAF)). It can utilize a wide range of pure and blended wet feedstocks, including sewage sludge from water resource recovery facilities (WRRF), food and agriculture wastes, algae, fats, oils and greases (FOG) and blends of dry and wet wastes/feedstocks. Historically, techno-economic analysis (TEA) and annual state of technology (SOT) assessments with standard economic assumptions used by the Bioenergy Technologies Office (BETO) were conducted for the wet waste HTL pathway leveraging experimental data collected from Pacific Northwest National Laboratory’s (PNNL) continuous flow reactor systems. The objective of the SOT assessment has been to guide and track progress of BETO’s HTL research and development (R&D) toward reduced cost and greenhouse gas (GHG) emissions for the pathway. However, gaps exist between BETO’s traditional SOT updates and the needs of key external stakeholders that – if addressed – will accelerate technology adoption. This Business Case Study aims to bridge this gap by providing an updated design, TEA, and LCA based on PNNL’s FY23 R&D with added analyses and information that provide enhanced relevance for stakeholders of the HTL technology. This includes specific siting, regional wet waste resource inventory and transportation cost analyses, fuel market information, sustainable fuel policy impacts, economic metrics of net present value (NPV) and internal rate of return (IRR), greenhouse gas (GHG) emissions analysis, and statistical analysis of cost and technical uncertainties of the HTL plant design. The study focuses on the “Detroit combined statistical area (CSA)” region for siting of a wet waste HTL plant adjacent to the Great Lakes Water Authority (GLWA) facility with guidance from industry participants. Regional resource and siting analyses were conducted to identify feedstock availability, scale, and cost, as well as a beneficial site location. TEA with detailed rigorous capital cost estimation for the specific site application was conducted to evaluate the key economic metrics of most value to industrial partners. These include total capital investment, operating costs, minimum fuel selling price (MFSP) of the biocrude and fuel blendstock, and NPV and internal rate of return IRR with sustainable fuel credits. Life cycle analysis was conducted to evaluate the supply chain greenhouse gas (GHG) emissions for the wet waste HTL process as compared with petroleum derived diesel. This study is also informed by years of R&D and process de-risking learnings and was conducted with a basic engineering HTL plant design and costing that akin to a “first-of-a-kind” plant economics. This differs from our conventional “nth plant ” SOT assessments. Specifically, the HTL process model has been updated with more operationally reliable methods for feed heating and phase separations. Further, we have implemented additional spare equipment for redundancy, a more rigorous installed equipment cost estimation approach, and additional costs associated with feed formatting and delivery, building, piping and site development. An Excel-based cost sheet based on the basic engineering design is also released alongside the report that allows users to conduct customized TEA with their own feed composition and financial assumptions.

09 BIOMASS FUELS↗

DOE OSTI2024

Supporting data for Site-specific Design Case Study for Wet Waste Hydrothermal Liquefaction and Biocrude Upgrading to Hydrocarbon Fuels

Hydrothermal liquefaction (HTL) is a thermal process that converts wet biomass to renewable hydrocarbon fuel blendstocks (i.e., renewable naphtha, renewable diesel, and sustainable aviation fuel (SAF)). It can utilize a wide range of pure and blended wet feedstocks, including sewage sludge from water resource recovery facilities (WRRF), food and agriculture wastes, algae, fats, oils and greases (FOG) and blends of dry and wet wastes/feedstocks. Historically, techno-economic analysis (TEA) and annual state of technology (SOT) assessments with standard economic assumptions used by the Bioenergy Technologies Office (BETO) were conducted for the wet waste HTL pathway leveraging experimental data collected from Pacific Northwest National Laboratory’s (PNNL) continuous flow reactor systems. The objective of the SOT assessment has been to guide and track progress of BETO’s HTL research and development (R&D) toward reduced cost and greenhouse gas (GHG) emissions for the pathway. However, gaps exist between BETO’s traditional SOT updates and the needs of key external stakeholders that – if addressed – will accelerate technology adoption. This Business Case Study aims to bridge this gap by providing an updated design, TEA, and LCA based on PNNL’s FY23 R&D with added analyses and information that provide enhanced relevance for stakeholders of the HTL technology. This includes specific siting, regional wet waste resource inventory and transportation cost analyses, fuel market information, sustainable fuel policy impacts, economic metrics of net present value (NPV) and internal rate of return (IRR), greenhouse gas (GHG) emissions analysis, and statistical analysis of cost and technical uncertainties of the HTL plant design. The study focuses on the “Detroit combined statistical area (CSA)” region for siting of a wet waste HTL plant adjacent to the Great Lakes Water Authority (GLWA) facility with guidance from industry participants. Regional resource and siting analyses were conducted to identify feedstock availability, scale, and cost, as well as a beneficial site location. TEA with detailed rigorous capital cost estimation for the specific site application was conducted to evaluate the key economic metrics of most value to industrial partners. These include total capital investment, operating costs, minimum fuel selling price (MFSP) of the biocrude and fuel blendstock, and NPV and internal rate of return IRR with sustainable fuel credits. Life cycle analysis was conducted to evaluate the supply chain greenhouse gas (GHG) emissions for the wet waste HTL process as compared with petroleum derived diesel. This study is also informed by years of R&D and process de-risking learnings and was conducted with a basic engineering HTL plant design and costing that akin to a “first-of-a-kind” plant economics. This differs from our conventional “nth plant ” SOT assessments. Specifically, the HTL process model has been updated with more operationally reliable methods for feed heating and phase separations. Further, we have implemented additional spare equipment for redundancy, a more rigorous installed equipment cost estimation approach, and additional costs associated with feed formatting and delivery, building, piping and site development. An Excel-based cost sheet based on the basic engineering design is also released alongside the report that allows users to conduct customized TEA with their own feed composition and financial assumptions.

Li, Shuyun↗

DOE OSTI2024

Development of a Sulfur Tolerant CHG Process (CRADA 442) (Final Report)

The Pacific Northwest Laboratory (PNNL) has developed the Catalytic Hydrothermal Gasification (CHG) technology, which can convert low-value organics dispersed in aqueous streams, such as the aqueous phase byproduct from hydrothermal liquefaction (HTL) of wet wastes, to a mixture of methane, H 2 , and CO 2 . The current CHG catalyst, ruthenium (Ru) on a graphite substrate, was selected for its effectiveness as a reducing catalyst. However, the target waste aqueous feedstock, the HTL aqueous phase from wet wastes, such as sewage sludge, contains a fair amount of sulfur in both organic and inorganic forms. Like many other reduced metal catalysts, Ru is deactivated or poisoned by exposure to sulfur, among other contaminants. In general, a deactivated Ru catalyst cannot be reactivated or restored except by removing and returning it for remanufacturing. Therefore, there is an urgent need for a sulfur-resistant catalyst to enable CHG processing of the HTL aqueous waste stream. PNNL, with support from SoCalGas CRADA, has developed a sulfur resistant CHG catalyst and demonstrated a stable CHG process for converting HTL aqueous phases from wet wastes. Here, we report the major accomplishments of the project: • We have demonstrated that sulfided Ru based catalysts is stable during CHG of HTL aqueous waste stream, with a requirement of activity improvement. • We have developed a new catalyst, with 0.5-2 wt.% Ru loading, showing better activity compared to the baseline 6.7 wt.% RuSx/C catalyst. • With the new catalysts, the single-pass COD reduction is approximately 60% and two-pass COD reduction can reach approximately 85%. • The process is robust in terms of being effective across a wide range of organic species in the feedstock. • Techno-economic analysis was conducted to evaluate the economic impact of catalyst advancement and identify further improvement requirements. This type of catalyst shows great potential to be efficient and robust for CHG with low catalyst cost.

03 NATURAL GAS↗

DOE OSTI2023

Supply Chain Sustainability Analysis of Renewable Hydrocarbon Fuels via Hydrothermal Liquefaction, Combined Algal Processing, and Biochemical Conversion: Update of the 2022 State-of-Technology Cases

The Department of Energy's (DOE) Bioenergy Technologies Office (BETO) aims to develop and deploy technologies to transform renewable biomass resources into commercially viable, high-performance biofuels, bioproducts, and biopower through public and private partnerships. BETO and its national laboratory teams conduct in-depth techno-economic assessments (TEA) of biomass feedstock supply and logistics and conversion technologies to produce biofuels. There are two general types of TEAs: A design case outlines a target case (future projection) for a particular biofuel pathway. It informs R&D priorities by identifying areas in need of improvement, tracks sustainability impact of R&D, and provides goals and benchmarks against which technology progress is assessed. A state of technology (SOT) analysis assesses progress within and across relevant technology areas based on actual results at current experimental scales relative to technical targets and cost goals from design cases, and includes technical, economic, and environmental criteria as available. In addition to developing a TEA for a pathway of interest, BETO also performs a supply chain sustainability analysis (SCSA). The SCSA takes the life-cycle analysis approach that BETO has been supporting for over 20 years. It enables BETO to identify energy consumption, environmental, and sustainability issues that may be associated with biofuel production. Approaches to mitigating these issues can then be developed. Additionally, the SCSA allows for comparison of energy and environmental impacts across biofuel pathways in BETO's research and development portfolio. This technical report describes the SCSAs for the production of renewable hydrocarbon transportation fuels via a range of conversion technologies in the 2022 SOTs: (1) renewable hydrocarbon fuels via hydrothermal liquefaction (HTL) of wet sludge from a wastewater treatment plant; (2) renewable hydrocarbon fuels via biochemical conversion of herbaceous lignocellulosic biomass; (3) renewable hydrocarbon fuels via HTL of an algae/woody biomass blend; and (4) renewable hydrocarbon fuels via combined algae processing (CAP).

09 BIOMASS FUELS↗

NASA NTRS1977

Extracting lignins from mill wastes

Addition of quaternary ammonium compound and activated charcoal to pulp and mill wastes precipitates lignins in sludge mixture. Methanol dissolves lignins for separation from resulting slurry. Mineral acid reprecipitates lignins in filtered solution. Quaternary ammonium compound, activated charcoal, as well as water may be recovered and recycled from this process.

Humphrey, M. F.↗

DOE OSTI2025

Thermal properties and Thermodynamic Equilibrium Modeling of Cementitious Waste Forms

INTRODUCTION Cementitious matrices are used in the US DOE complex and worldwide to solidify aqueous radioactive, hazardous, mixed salt solutions, and sludges to meet low-level radioactive waste (LLW) disposal requirements. Blended formulations are used for most waste form mix designs. Substitution of pozzolans for Class F fly ash has the potential to alter the processing properties and stabilization properties of the resulting waste forms because they add chemical and mineralogical complexity to the final material. The Savannah River Site saltstone waste form was selected as the test case material. CemGEMS software was chosen as the model for predicting hydrated cementitious phases assemblages and phase evolution. Isothermal calorimetry was used as the method for evaluating processing and properties of fresh, uncured waste forms. The test cases consisted of reference case saltstone, and five natural pozzolan substituted saltstone mixes.

Bustamante, Michael E. [Savannah River National La↗

DOE OSTI2022

Experimental Results for Large Particle Separation from Non-Newtonian Slurries Using Tapered Bump Arrays

Lateral displacement arrays are useful for separating particles such as blood cells and sand from carrier fluids. These arrays consist of staggered posts, which allow smaller particles to follow streamlines and larger particles to flow around the posts and migrate to one side. This migration increases the particle concentration in one direction and depletes the particle concentration in the other direction allowing particle separation to occur. Experiments were conducted to separate large particles in non-Newtonian yield stress slurries using tapered bump arrays. The non-Newtonian slurry used was composed of a bentonite kaolin blend with the inclusion of larger diameter particles. These experiments were conducted to evaluate the performance of particle separation using a tapered array of staggered posts as configured in a bump array for non-Newtonian yield stress slurries, an application that has not been explored experimentally. A theory for large particle separation was developed for slurries that exhibit Bingham or Cross rheology. The results of these experiments are described. This information could be applied in industrial settings such as separation of particles from nuclear waste slurries including those to be processed at the Hanford site, where removing large particles from waste streams is important to processing.

slurry, solids removal, deterministic lateral disp↗

DOE OSTI2023

Comparing Experimental Results for Large Particle Separation from Non-Newtonian Slurries Using Full and Tapered Bump Arrays

To separate particles from carrier fluids arrays of staggered posts inserted into the flow stream can be employed. The smaller particles follow the flow stream while the larger particles move laterally to one side. During flow, the concentration of particulate increases in one direction and decreases in the other crosswise direction. This technique separates the particles from the carrier fluid. Experiments using a slurry with non-Newtonian rheology were conducted to evaluate large particle separation from the non-Newtonian carrier fluid using bump arrays. The bentonite kaolin clay slurry with non-Newtonian rheology was spiked with large diameter inert glass particles. Experiments with flow through lateral displacement arrays evaluated the performance of particle separation using two array configurations: a full array with all posts and a tapered array with posts removed in a triangular portion of the array past the rows of anticipated particle of separation. The posts are staggered posts to promote particle segregation to one side of the flow channel. Using this type of array for removing particles from non-Newtonian yield stress slurries is novel and we present unique results. In this paper, the performance of full and tapered arrays are compared. These results have many industrial applications including removing particles from slurries of nuclear waste. Large particle removal is an important step in waste processing.

slurry, solids removal, deterministic lateral disp↗