Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “separated representations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

SRS Composite Analysis Monitoring Plan (FY2019 Model Validation)

Using a projected end-state date of 2065 (SRNS 2015b), the Savannah River Site (SRS) Composite Analysis (CA) modeling for each facility and waste site began on the inventory year assigned to it so that source depletion and radionuclide transport out of the system could be appropriately captured. Some SRS waste sites that have already achieved their end states (i.e. end-state inventories and end-state configuration) are currently contributing to the potential off-site public dose through source release, groundwater transport, discharge to on-site surface streams, and stream transport to the CA point of assessments (POAs). The inventory year assigned to these waste sites is 2002 or before. This means that SRS CA results from 2002 and beyond are a reasonable representation for these waste sites that have already achieved their end states and are currently contributing to the potential off-site public dose. The SRS Annual Environmental Report (AER) monitoring can differentiate and separate liquid pathway data allowing the data representing only waste sites at their end state to be produced. Because the SRS CA has projected reasonable end-state impacts from 2002 and beyond, and the AER monitoring can differentiate and separate operating and end-state contributions to annual liquid pathway release, an opportunity exists to use the AER monitoring data to validate the SRS CA model. The CA model validation program uses a graded and systematic approach for taking corrective action, starting with an SRS established administrative dose limit of 15 mrem/yr, below which no action is required. Based on the location of the 2010 SRS CA POAs, the only potential exposure pathway for the public is through surface water. The completion of the FY2019 CA model validation indicates that the SRS CA projected dose, while generally conservative, provides a reasonable representation of the maximum annual doses. These doses are well below the administrative limit; therefore, no additional action is required.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS2004

A Direct Approach for Minimum Fuel Maneuvers of Distributed Spacecraft in Multiple Flight Regimes

In this work we present a method to solve the impulsive minimum fuel maneuver problem for a distributed set of spacecraft. We develop the method assuming a fully non-linear dynamics model and parameterize the problem to allow the method to be applicable to any flight regime. Furthermore, the approach is not limited by the inter-spacecraft separation distances and is applicable to both small formations as well as constellations. We assume that the desired relative motion is driven by mission requirements and has been determined a-priori. The goal of this work is to develop a technique to achieve the desired relative motion in a minimum fuel manner. To permit applicability to multiple flight regimes, we have chosen to parameterize the cost function in terms of the maneuver times expressed in a useful time system and the maneuver locations expressed in their Cartesian vector representations. We also include as an independent variable the initial reference orbit to solve for the optimal injection orbit to minimize and equalize the fuel expenditure of distributed sets of spacecraft with large inter-spacecraft separations. In this work we derive the derivatives of the cost and constraints with respect to all of the independent variables.

Hughes, Steven P↗
DOE OSTI2021

Separating Physically Distinct Mechanisms in Complex Infrared Plasmonic Nanostructures via Machine Learning Enhanced Electron Energy Loss Spectroscopy

Electron energy loss spectroscopy (EELS) enables direct exploration of plasmonic phenomena at the nanometer level. To isolate individual plasmon modes, linear unmixing methods can be used to separate different physical mechanisms, but in larger and more complex systems the interpretability of the components becomes uncertain. Here, infrared plasmonic resonances in self-assembled heterogeneous monolayer films of doped-semiconductor nanoparticles are examined beyond linear unmixing techniques, and both supervised and unsupervised machine-learning-based analyses of hyperspectral EELS datasets are demonstrated. Additionally, in the supervised approach, a human operator labels a small number of pixels in the hyperspectral dataset corresponding to features of interest which are then propagated across the entire dataset. In the unsupervised approach, non-linear autoencoders are used to create a highly-reduced latent-space representation of the dataset, within which insight into the relevant physics can be gleaned from straightforward distance metrics that do not depend on operator input and bias. The advantage of these approaches is that the labeling separates physical mechanisms without altering the data, enabling robust analyses of the influence of heterogeneities in mesoscale complex systems.

36 MATERIALS SCIENCE↗
NASA NTRS1973

Radar spectral measurements of vegetation

Spectral data of 4-8 GHz radar backscatter were gathered during the 1972 growing season at look angles between 0 and 70 deg and for all four possible polarization linear combinations. The data covers four crop types (corn, milo, alfalfa, and soybeans) and a wide range of soil moisture content. To insure statistical representation of the results, measurements were conducted over 128 fields corresponding to a total of about 40,000 data points. The use of spectral response signatures to separate different crop types and to separate healthy corn from blighted corn was investigated.

Ulaby, F. T.↗
NASA NTRS2002

Overlap Properties of Clouds Generated by a Cloud Resolving Model

In order for General Circulation Models (GCMs), one of our most important tools to predict future climate, to correctly describe the propagation of solar and thermal radiation through the cloudy atmosphere a realistic description of the vertical distribution of cloud amount is needed. Actually, one needs not only the cloud amounts at different levels of the atmosphere, but also how these cloud amounts are related, in other words, how they overlap. Currently GCMs make some idealized assumptions about cloud overlap, for example that contiguous cloud layers overlap maximally and non-contiguous cloud layers overlap in a random fashion. Since there are difficulties in obtaining the vertical profile of cloud amount from observations, the realism of the overlap assumptions made in GCMs has not been yet rigorously investigated. Recently however, cloud observations from a relatively new type of ground radar have been used to examine the vertical distribution of cloudiness. These observations suggest that the GCM overlap assumptions are dubious. Our study uses cloud fields from sophisticated models dedicated to simulate cloud formation, maintenance, and dissipation called Cloud Resolving Models . These models are generally considered capable of producing realistic three-dimensional representation of cloudiness. Using numerous cloud fields produced by such a CRM we show that the degree of overlap between cloud layers is a function of their separation distance, and is in general described by a combination of the maximum and random overlap assumption, with random overlap dominating as separation distances increase. We show that it is possible to parameterize this behavior in a way that can eventually be incorporated in GCMs. Our results seem to have a significant resemblance to the results from the radar observations despite the completely different nature of the datasets. This consistency is encouraging and will promote development of new radiative transfer codes that will estimate the radiation effects of multi-layer cloud fields more accurately.

Oreopoulos, L.↗
NASA NTRS2009

Converting CSV Files to RKSML Files

A computer program converts, into a format suitable for processing on Earth, files of downlinked telemetric data pertaining to the operation of the Instrument Deployment Device (IDD), which is a robot arm on either of the Mars Explorer Rovers (MERs). The raw downlinked data files are in comma-separated- value (CSV) format. The present program converts the files into Rover Kinematics State Markup Language (RKSML), which is an Extensible Markup Language (XML) format that facilitates representation of operations of the IDD and enables analysis of the operations by means of the Rover Sequencing Validation Program (RSVP), which is used to build sequences of commanded operations for the MERs. After conversion by means of the present program, the downlinked data can be processed by RSVP, enabling the MER downlink operations team to play back the actual IDD activity represented by the telemetric data against the planned IDD activity. Thus, the present program enhances the diagnosis of anomalies that manifest themselves as differences between actual and planned IDD activities.

Trebi-Ollennu, Ashitey↗
DOE OSTI2020

Markovian transport processes in a heterogeneous, variably saturated watershed: A multi-domain spatial Markov model

Transport processes in watersheds remain challenging to describe accurately with upscaled models because of their intricate complexities at multiple scales that can lead to multi-modal, non-Fickian breakthrough curves. One of the recent advances in solute transport modeling has been the Lagrangian spatial Markov model (SMM), which describes transport using velocity increments and models the correlated transitions between them. The method has been applied previously to saturated porous media and fractured media, but these successful applications suggest it may be useful for describing watershed scale processes as well. An existing, 3-D, heterogeneous variably saturated model of a headwaters catchment and classical random walk particle tracking were used to generate a forward simulation and the resulting transport was analyzed with a spatial Markov framework. Existing SMM methods were used to analyze the transport paths through the complex, unconfined domain and we found that the vadose zone plays an important role in the correlation structure. As such, a new kind of SMM is proposed, termed a multi-domain SMM (MD-SMM), that uses separate correlation models for auto-transitions in the vadose zone and the saturated zone, and for the cross-transitions between them. The MD-SMM improves representation of transport relative to the single domain model and can naturally delineate times when a particle is in the vadose zone or the saturated zone, adding an additional degree of realism to the upscaled model. Lastly, we show that the transition probability matrix for transport in the saturated portion of this unconfined system is approximately Markovian, which is an important validation of the proposed framework.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1975

Results of aerothermodynamic heating tests on a 0.013-scale model solid rocket booster in the NASA/LaRC unitary plan wind tunnel (SH12F)

A 0.013 scale model of the solid rocket booster (SRB) used to launch the space shuttle was tested at a Mach number of 3.7 and Reynolds numbers of 1,500,000 and 3,500,000 per foot. The objective of the test was to obtain aerodynamic heat transfer data on the surface of scaled models of the SRB at simulated full scale reentry flight conditions. Three separate models were utilized to measure film coefficients over an angle of attack range from 0 deg to 180 deg at 0 deg sideslip. All three models were representations of the MCR0200 baseline configuration and varied only by the way they were mounted in the tunnel. Model A, sting mounted thru the model base, was utilized for testing between 0 deg and 40 deg angle of attack. Model B was blade mounted from the top of the model and was tested between 60 deg and 120 deg angle of attack. Model C was sting mounted thru the model nose and utilized for testing between 140 deg and 180 deg angle of attack.

Brewer, E. B.↗
NASA NTRS1988

Modeling effects on the prediction of aerodynamic performance of a double-delta wing

A numerical investigation is undertaken of an 80/65-deg double-delta flat wing by means of the free vortex sheet method that views the vortex system on the leading edge in three different ways, in order to assess the effect of the model's type on the aerodynamic performance of the wing. The model employing two separate vortex systems, one each on inward and outward leading edges, yields predictions that are in close agreement with experimental data, although the model with single-vortex representation is adequate and requires less computational time.

Reddy, C. S.↗
NASA NTRS1993

Several examples where turbulence models fail in inlet flow field analysis

Computational uncertainties in turbulence modeling for three dimensional inlet flow fields include flows approaching separation, strength of secondary flow field, three dimensional flow predictions of vortex liftoff, and influence of vortex-boundary layer interactions; computational uncertainties in vortex generator modeling include representation of generator vorticity field and the relationship between generator and vorticity field. The objectives of the inlet flow field studies presented in this document are to advance the understanding, prediction, and control of intake distortion and to study the basic interactions that influence this design problem.

Anderson, Bernhard H.↗
NASA NTRS1995

Flight test validation of a frequency-based system identification method on an F-15 aircraft

A frequency-based performance identification approach was evaluated using flight data from the NASA F-15 Highly Integrated Digital Electronic Control aircraft. The approach used frequency separation to identify the effectiveness of multiple controls simultaneously as an alternative to independent control identification methods. Fourier transformations converted measured control and response data into frequency domain representations. Performance gradients were formed using multiterm frequency matching of control and response frequency domain models. An objective function was generated using these performance gradients. This function was formally optimized to produce a coordinated control trim set. This algorithm was applied to longitudinal acceleration and evaluated using two control effectors: nozzle throat area and inlet first ramp. Three criteria were investigated to validate the approach: simultaneous gradient identification, gradient frequency dependency, and repeatability. This report describes the flight test results. These data demonstrate that the approach can accurately identify performance gradients during simultaneous control excitation independent of excitation frequency.

Schkolnik, Gerard S.↗
NASA NTRS1997

Attributes of GRB Pulses: Analysis of BATSE TTE Data

Our extensive program of modeling GRB profiles is aimed at elucidating the physical processes responsible for the burst itself, as well as possible extrinsic phenomena (e.g. time dilation) as discussed in another paper in this Symposium (Norris et al., "GRB PROFILES AS COSMIC PROBES"). We have developed special methods to extract the wealth of short time-scale information contained in the BATSE time-tag event (TTE) data. Our algorithm yields a piecewise-constant representation of the light curve -- using only the raw photon arrival times, and based on Bayesian change-point methods. This representation in effect lets the data determine the bin size and location, and avoids unwanted effects due to arbitrary choices of the bin parameters. We have determined widths, separations, and amplitudes of pulses contained in the bursts, without invoking a specific pulse model. The effect of cosmic time dilation can be easily seen in a direct plot of amplitude vs. time scale for individual pulses, without the need to lump the data into a small number of brightness classes. We are also performing noise equalization on these data (to reduce a well-known bias of pulse width as a function of signal-to-noise ratio), as well as fits of parametric pulse-shape models -- including explicit energy dependence of the pulse parameters. Such refinements are expected to improve the quality and physical significance of these results.

Norris, J. P.↗
NASA NTRS2000

Plant chlorophyll content meter

A plant chlorophyll content meter is described which collects light reflected from a target plant and separates the collected light into two different wavelength bands. These wavelength bands, or channels, are described as having center wavelengths of 700 nm and 840 nm. The light collected in these two channels are processed using photo detectors and amplifiers. An analog to digital converter is described which provides a digital representation of the level of light collected by the lens and falling within the two channels. A controller provided in the meter device compares the level of light reflected from a target plant with a level of light detected from a light source, such as light reflected by a target having 100% reflectance, or transmitted through a diffusion receptor. The percent of reflection in the two separate wavelength bands from a target plant are compared to provide a ratio which indicates a relative level of plant physiological stress. A method of compensating for electronic drift is described where a sample is taken when a collection lens is covered to prevent light from entering the device. This compensation method allows for a more accurate reading by reducing error contributions due to electronic drift from environmental conditions at the location where a hand-held unit is used.

Spiering, Bruce A.↗
DOE OSTI2022

Bootstrapping Mixed MN Correlators in 3D

The recent emergence of the modern conformal bootstrap method for the study of conformal field theories (CFTs) has enabled the revisiting of old problems in classical critical phenomena described by three-dimensional CFTs. The study of such CFTs with O(m)^n \rtimes S_n O ( m ) n ⋊ S n global symmetry, also known as models, is pursued in this work. Systems of mixed correlators involving scalar operators in two different representations of the global symmetry group are considered. Isolated allowed regions are found in parameter space for various values of m m and n n . These ``islands’’ can be separated into two qualitative groups: those close to the unitarity bound and those further away. As a by-product of our analysis generic tensor structures required to bootstrap any G^n \rtimes S_n G n ⋊ S n theory with G G arbitrary are worked out.

Kousvos, Stefanos Robert↗
NASA NTRS1995

Harmonic oscillator representation in the theory of scattering and nuclear reactions

The following questions, concerning the application of the harmonic oscillator representation (HOR) in the theory of scattering and reactions, are discussed: the formulation of the scattering theory in HOR; exact solutions of the free motion Schroedinger equation in HOR; separable expansion of the short range potentials and the calculation of the phase shifts; 'isolated states' as generalization of the Wigner-von Neumann bound states embedded in continuum; a nuclear coupled channel problem in HOR; and the description of true three body scattering in HOR. As an illustration the soft dipole mode in the (11)Li nucleus is considered in a frame of the (9)Li+n+n cluster model taking into account of three body continuum effects.

Smirnov, Yuri F.↗
DOE OSTI2022

Multitask Machine Learning of Collective Variables for Enhanced Sampling of Rare Events

Computing accurate reaction rates is a central challenge in computational chemistry and biology because of the high cost of free energy estimation with unbiased molecular dynamics. In this work, a data-driven machine learning algorithm is devised to learn collective variables with a multitask neural network, where a common upstream part reduces the high dimensionality of atomic configurations to a low dimensional latent space and separate downstream parts map the latent space to predictions of basin class labels and potential energies. Here, the resulting latent space is shown to be an effective low-dimensional representation, capturing the reaction progress and guiding effective umbrella sampling to obtain accurate free energy landscapes. This approach is successfully applied to model systems including a 5D Müller Brown model, a 5D three-well model, the alanine dipeptide in vacuum, and an Au(110) surface reconstruction unit reaction. It enables automated dimensionality reduction for energy controlled reactions in complex systems, offers a unified and data-efficient framework that can be trained with limited data, and outperforms single-task learning approaches, including autoencoders.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1991

Decentralized hierarchical partitioning of centralized integrated controllers

A framework for a decentralized hierarchical controller partitioning structure is developed. This structure allows for the design of separate airframe and propulsion controllers which, when assembled, will meet the overall design criterion for the integrated airframe/propulsion system. An algorithm based on parameter optimization of the state-space representation for the subsystem controllers is described. The algorithm is currently being applied to an integrated flight propulsion control design example.

Schmidt, Phillip↗
NASA NTRS2021

Dual Quaternion Visual Servo Control

This paper focuses on a dual quaternion-based estimation and control approach for position-based visual servoing (PBVS). The pose estimation of the camera is achieved using a dual quaternion-based Extended Kalman Filter (EKF), which estimates the position and orientation of the camera based on feature points acquired through a sequence of camera images. Based on the estimation, a dual quaternion control law is developed to regulate the camera to the desired pose. Leveraging the local exponential stability of the EKF and the global exponential stability of the designed controller, a nonlinear separation principle is used to prove the stability of the joint estimation and control for PBVS. The method is distinguished from other PBVS methods in the sense that a compact representation of dual quaternion is used to represent the pose, and a joint stability of estimator and controller for PBVS in dual quaternion space is presented. The proposed dual quaternion PBVS method is validated using a simulation.

Quaternions↗