Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “scope”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Letter Report: Yucca Mountain Environmental Monitoring Systems Initiative - Air Quality Scoping Study for Tonopah Airport, Nye County, Nevada

The Desert Research Institute (DRI) is performing a scoping study as part of the U.S. Department of Energy's Yucca Mountain Environmental Monitoring Systems Initiative (EMSI). The main objective is to obtain baseline air quality information for Yucca Mountain and an area surrounding the Nevada Test Site (NTS). Air quality and meteorological monitoring and sampling equipment housed in a mobile trailer (shelter) is collecting data at eight sites outside the NTS, including Ash Meadows National Wildlife Refuge (NWR), Tonopah Airport, Beatty, Rachel, Caliente, Pahranagat NWR, Crater Flat, and the Tonopah Airport, and at four sites on the NTS (Engelbrecht et al., 2007a-d). The trailer is stationed at any one site for approximately eight weeks at a time. This letter report provides a summary of air quality and meteorological data, on completion of the site's sampling program.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Characterization and Alteration of Wettability States of Alaskan Reserviors to Improve Oil Recovery Efficiency (including the within-scope expansion based on Cyclic Water Injection - a pulsed waterflood for Enhanced Oil Recovery)

Numerous early reports on experimental works relating to the role of wettability in various aspects of oil recovery have been published. Early examples of laboratory waterfloods show oil recovery increasing with increasing water-wetness. This result is consistent with the intuitive notion that strong wetting preference of the rock for water and associated strong capillary-imbibition forces gives the most efficient oil displacement. This report examines the effect of wettability on waterflooding and gasflooding processes respectively. Waterflood oil recoveries were examined for the dual cases of uniform and non-uniform wetting conditions. Based on the results of the literature review on effect of wettability and oil recovery, coreflooding experiments were designed to examine the effect of changing water chemistry (salinity) on residual oil saturation. Numerous corefloods were conducted on reservoir rock material from representative formations on the Alaska North Slope (ANS). The corefloods consisted of injecting water (reservoir water and ultra low-salinity ANS lake water) of different salinities in secondary as well as tertiary mode. Additionally, complete reservoir condition corefloods were also conducted using live oil. In all the tests, wettability indices, residual oil saturation, and oil recovery were measured. All results consistently lead to one conclusion; that is, a decrease in injection water salinity causes a reduction in residual oil saturation and a slight increase in water-wetness, both of which are comparable with literature observations. These observations have an intuitive appeal in that water easily imbibes into the core and displaces oil. Therefore, low-salinity waterfloods have the potential for improved oil recovery in the secondary recovery process, and ultra low-salinity ANS lake water is an attractive source of injection water or a source for diluting the high-salinity reservoir water. As part of the within-scope expansion of this project, cyclic water injection tests using high as well as low salinity were also conducted on several representative ANS core samples. These results indicate that less pore volume of water is required to recover the same amount of oil as compared with continuous water injection. Additionally, in cyclic water injection, oil is produced even during the idle time of water injection. It is understood that the injected brine front spreads/smears through the pores and displaces oil out uniformly rather than viscous fingering. The overall benefits of this project include increased oil production from existing Alaskan reservoirs. This conclusion is based on the performed experiments and results obtained on low-salinity water injection (including ANS lake water), vis-a-vis slightly altering the wetting conditions. Similarly, encouraging cyclic water-injection test results indicate that this method can help achieve residual oil saturation earlier than continuous water injection. If proved in field, this would be of great use, as more oil can be recovered through cyclic water injection for the same amount of water injected.

02 PETROLEUM↗

Improving Natural Uranium Utilization By Using Thorium in Low Moderation PWRs - A Preliminary Neutronic Scoping Study

The Th-U fuel cycle is not quite self-sustainable when used in water-cooled reactors and with fuel burnups higher than a few thousand of MWd/t characteristic of CANDU reactors operating with a continuous refueling. For the other industrially mature water-cooled reactors (i.e. PWRs and BWRs) it is economically necessary that the fuel has enough reactivity to reach fuel burnups of the order of a few tens of thousand of MWd/t. In this particular case, an additional input of fissile material is necessary to complement the bred fissile U-233. This additional fissile material could be included in the form of Highly Enriched Uranium (HEU) at the fabrication of the Th-U fuel. The objective of this preliminary neutronic scoping study is to determine (1) how much HEU and, consequently, how much natural uranium is necessary in such Th-U fuel cycle with U recycling and (2) how much TRansUranics (TRU=Pu, Np, Am and Cm) are produced. These numbers are then compared with those of a standard UO2 PWR. The thorium reactors considered have a homogeneous hexagonal lattice made up of the same (Th-U)O2 pins. Furthermore, at this point, we are not considering the use of blankets inside or outside the core. The lattice pitch has been varied to estimate the effect of the water-to-fuel volume ratio, and light water as well as heavy water have been considered. For most cases, an average burnup at discharge of 45,000 MWd/t has been considered.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A scoping review of zoonotic parasites and pathogens associated with abattoirs in Eastern Africa and recommendations for abattoirs as disease surveillance sites

Abattoirs are facilities where livestock are slaughtered and are an important aspect in the food production chain. There are several types of abattoirs, which differ in infrastructure and facilities, sanitation and PPE practices, and adherence to regulations. In each abattoir facility, worker exposure to animals and animal products increases their risk of infection from zoonotic pathogens. Backyard abattoirs and slaughter slabs have the highest risk of pathogen transmission because of substandard hygiene practices and minimal infrastructure. These abattoir conditions can often contribute to environmental contamination and may play a significant role in disease outbreaks within communities. To assess further the risk of disease, we conducted a scoping review of parasites and pathogens among livestock and human workers in abattoirs across 13 Eastern African countries, which are hotspots for zoonoses. Our search results (n = 104 articles) showed the presence of bacteria, viruses, fungi, and macroparasites (nematodes, cestodes, etc.) in cattle, goats, sheep, pigs, camels, and poultry. Most articles reported results from cattle, and the most frequent pathogen detected was Mycobacterium bovis, which causes bovine tuberculosis. Some articles included worker survey and questionnaires that suggested how the use of PPE along with proper worker training and safe animal handling practices could reduce disease risk. Based on these findings, we discuss ways to improve abattoir biosafety and increase biosurveillance for disease control and mitigation. Abattoirs are a ‘catch all’ for pathogens, and by surveying animals at abattoirs, health officials can determine which diseases are prevalent in different regions and which pathogens are most likely transmitted from wildlife to livestock. We suggest a regional approach to biosurveillance, which will improve testing and data gathering for enhanced disease risk mapping and forecasting. Next generation sequencing will be key in identifying a wide range of pathogens, rather than a targeted approach.

60 APPLIED LIFE SCIENCES↗

Understanding Air Quality Changes after Implementation of Mitigation Measures during a Pandemic: A Scoping Review of Literature in the United States

Traffic-related emissions continue to be a significant source of air pollution in the United States (US) and around the globe. Evidence has shown that previous policies implemented to restrict-traffic flows have affected air pollution levels. Thus, mitigation strategies associated with the COVID-19 pandemic that modified population-level mobility patterns provide a unique opportunity to study air pollution change across the US. For instance, to slow the spread of the pandemic, state and local governments started implementing various mitigation actions, including stay-at-home directives, social distancing measures, school closures, and travel restrictions. This scoping review aimed to summarize the existing evidence about how air quality changed through mitigation practices throughout the pandemic in the US. We found 66 articles that fit our inclusion criteria. Generally, the consolidated results revealed that nitrogen dioxide (NO 2 ) and carbon monoxide (CO) decreased across the country. Studies observed mixed directions and magnitudes of change for fine and coarse particulate matter (PM 2.5 , PM 10 ), ozone (O 3 ), and sulfur dioxide (SO2). Few articles tried to explain this notable heterogeneity in air quality changes by associating contextual factors, such as mobility, traffic flow, and demographic factors. However, all studies agreed that the change in air pollution was nonuniform across the US and even varied within a city.

54 ENVIRONMENTAL SCIENCES↗

Objectives and scope

This first chapter of a report on the aerodynamic design of axial-flow compressors presents the general objectives and scope of the over-all report. The basic problem of compressor design is outlined, and the approach generally taken to accomplish its solution is pointed out. The sixteen succeeding chapters in the report are summarized.

Systems design↗

Scoping support to program requirements

Scoping of logistics support to program requirements - participation of logistician during conceptual, design, development, production, and deployment phases

SUPPORT SYSTEM↗

The Scope FORMAC language

Describing experimental on-line interactive symbolic prototype Scope FORMAC language implemented on IBM 2250 graphic display unit

Lipson, J. D.↗

The low intensity X-ray imaging scope /Lixiscope/

A fully portable, small-format X-ray imaging system, Lixiscope (low intensity X-ray imaging scope) is described. In the prototype, which has been built to demonstrate the feasibility of the Lixiscope concept, only well-developed and available components have been used. Consideration is given to the principles of operation of the device, some of its performance characteristics as well as possible dental, medical and industrial applications.

Yin, L. I.↗

Scoping Calculations of Power Sources for Nuclear Electric Propulsion

This technical memorandum describes models and calculational procedures to fully characterize the nuclear island of power sources for nuclear electric propulsion. Two computer codes were written: one for the gas-cooled NERVA derivative reactor and the other for liquid metal-cooled fuel pin reactors. These codes are going to be interfaced by NASA with the balance of plant in order to make scoping calculations for mission analysis.

Difilippo, F. C.↗

NASA Scope and Subject Category Guide

This guide provides a simple, effective tool to assist aerospace information analysts and database builders in the high-level subject classification of technical materials. Each of the 76 subject categories comprising the classification scheme is presented with a description of category scope, a listing of subtopics, cross references, and an indication of particular areas of NASA interest. The guide also includes an index of nearly 3,000 specific research topics cross referenced to the subject categories. The portable document format (PDF) version of the guide contains links in the index from each input subject to its corresponding categories. In addition to subject classification, the guide can serve as an aid to searching databases that use the classification scheme, and is also an excellent selection guide for those involved in the acquisition of aerospace literature. The CD-ROM contains both HTML and PDF versions.

Source record↗

Mission Options Scoping Tool for Mars Orbiters: Mass Cost Calculator (MC2)

Prior to developing the details of an advanced mission study, the mission architecture trade space is typically explored to assess the scope of feasible options. This paper describes the main features of an Excel-based tool, called the Mass-Cost-Calculator (MC2 ), which is used to perform rapid, high-level mass and cost options analyses of Mars orbiter missions. MC2 consists of a combination of databases, analytical solutions, and parametric relationships to enable quick evaluation of new mission concepts and comparison of multiple architecture options. The tool's outputs provide program management and planning teams with answers to "what if" queries, as well as an understanding of the driving mission elements, during the pre-project planning phase. These outputs have been validated against the outputs generated by the Advanced Projects Design Team (Team X) at NASA's Jet Propulsion Laboratory (JPL). The architecture of the tool allows for future expansion to other orbiters beyond Mars, and to non-orbiter missions, such as those involving fly-by spacecraft, probes, landers, rovers, or other mission elements.

orbiters↗

Orion GN&C Fault Management System Verification: Scope And Methodology

In order to ensure long-term ability to meet mission goals and to provide for the safety of the public, ground personnel, and any crew members, nearly all spacecraft include a fault management (FM) system. For a manned vehicle such as Orion, the safety of the crew is of paramount importance. The goal of the Orion Guidance, Navigation and Control (GN&C) fault management system is to detect, isolate, and respond to faults before they can result in harm to the human crew or loss of the spacecraft. Verification of fault management/fault protection capability is challenging due to the large number of possible faults in a complex spacecraft, the inherent unpredictability of faults, the complexity of interactions among the various spacecraft components, and the inability to easily quantify human reactions to failure scenarios. The Orion GN&C Fault Detection, Isolation, and Recovery (FDIR) team has developed a methodology for bounding the scope of FM system verification while ensuring sufficient coverage of the failure space and providing high confidence that the fault management system meets all safety requirements. The methodology utilizes a swarm search algorithm to identify failure cases that can result in catastrophic loss of the crew or the vehicle and rare event sequential Monte Carlo to verify safety and FDIR performance requirements.

Brown, Denise↗

Development of an Accepted Medical Condition List for Exploration Medical Capability Scoping

The Accepted Medical Conditions List (AMCL) is a product designed to provide a traceable, repeatable, evidence-based consensus process for scoping the medical capability needs for future design reference missions (DRMs) and upcoming programs. These include a Mars transit DRM and a shorter duration cis-lunar DRM. The development of a baseline AMCL by the Exploration Medical Capability (ExMC) Element will assist the effort to identify high priority medical capabilities for inclusion in mission and vehicle planning and provide traceable and documented clinical needs to the Systems Engineering teams tasked with requirements development and design work.

Medical Condition List↗

Scope and Goals of NASA's Quesst Community Test Campaign with the X-59 Aircraft

In its mission to expand knowledge and improve aviation, NASA conducts research to address sonic boom noise, the prime barrier to overland supersonic flight. For half a century, civilian aircraft have been required to fly slower than the speed of sound when over land to prevent sonic boom disturbances to communities under the flight path. However, lower noise levels may be achieved via new aircraft shaping techniques that reduce the merging of shockwaves generated during supersonic flight. As part of its Quesst mission, NASA is building a piloted, experimental aircraft called the X-59 to demonstrate low noise supersonic flight. After initial flight testing to ensure the aircraft performs as designed, NASA will begin a national campaign of supersonic flights over communities to collect data on how people perceive the sounds from this new design. The data collected will support the efforts of national and international noise regulators to develop new standards that would allow supersonic flight over land at low noise levels. This paper provides an update on the planned experimental scope and key goals of the community test campaign.

sonic boom↗

Scope and Goals of the NASA Quesst Community Test Campaign With the X-59 Aircraft

In its mission to expand knowledge and improve aviation, NASA conducts research to address sonic boom noise, the prime barrier to overland supersonic flight. For half a century, civilian aircraft have been required to fly slower than the speed of sound when over land to prevent sonic boom disturbances to communities under the flight path. However, lower noise levels may be achieved via new aircraft shaping techniques that reduce the merging of shockwaves generated during supersonic flight. As part of its Quesst mission, NASA is building a piloted, experimental aircraft called the X-59 to demonstrate low noise supersonic flight. After initial flight testing to ensure the aircraft performs as designed, NASA will begin a national campaign of supersonic flights over communities to collect data on how people perceive the sounds from this new design. The data collected will support the efforts of national and international noise regulators to develop new standards that would allow supersonic flight over land at low noise levels. This paper provides an update on the planned experimental scope and key goals of the community test campaign.

sonic boom↗