Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “rotating fluid”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Numerical Simulations of Convectively Excited Gravity Waves

Magneto-convection and gravity waves are numerically simulated with a nonlinear, three-dimensional, time-dependent model of a stratified, rotating, spherical fluid shell heated from below. A Solar-like reference state is specified while global velocity, magnetic field, and thermodynamic perturbations are computed from the anelastic magnetohydrodynamic equations. Convective overshooting from the upper (superadiabatic) part of the shell excites gravity waves in the lower (subadiabatic) part. Due to differential rotation and Coriolis forces, convective cell patterns propagate eastward with a latitudinally dependent phase velocity. The structure of the excited wave motions in the stable region is more time-dependent than of the convective motions above. The magnetic field tends to be concentrated over giant-cell downdrafts in the convective zone but is affected very little by the wave motion in the stable region.

Glatzmaier, G. A.↗
DOE OSTI2021

Finite-difference multiple fluid solution for source-driven rotation in highly magnetized linear plasma device

The rotation profile of a magnetized plasma cylinder composed of multiple fluids is investigated analytically, expanding on previous results. The analytic steady-state solution is used as a benchmark for a time-dependent multiple-fluid finite-difference code, MITNS: Multiple-Ion Transport Numerical Solver. Magnetic field evolution is taken into account, both analytically and numerically. Its details are shown to be of importance when particles are allowed out of the domain. MITNS reproduces the asymptotic expansion results for a small parameter $δ<<<1$. For $\sqrt{m_elm_i} ~ δ << 1$ , a slightly different regime, dominated by viscosity-induced transport of ions, is found numerically and analytically. Finally, this verification supports the use of this code for more complex time-dependent calculations in the future. Additionally, we derive the angular velocity profile of each species due to radial particle and charge fluxes of various strengths.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1990

Unique cell culture systems for ground based research

The horizontally rotating fluid-filled, membrane oxygenated bioreactors developed at NASA Johnson for spacecraft applications provide a powerful tool for ground-based research. Three-dimensional aggregates formed by cells cultured on microcarrier beads are useful for study of cell-cell interactions and tissue development. By comparing electron micrographs of plant seedlings germinated during Shuttle flight 61-C and in an earth-based rotating bioreactor it is shown that some effects of microgravity are mimicked. Bioreactors used in the UAH Bioreactor Laboratory will make it possible to determine some of the effects of altered gravity at the cellular level. Bioreactors can be valuable for performing critical, preliminary-to-spaceflight experiments as well as medical investigations such as in vitro tumor cell growth and chemotherapeutic drug response; the enrichment of stem cells from bone marrow; and the effect of altered gravity on bone and muscle cell growth and function and immune response depression.

Lewis, Marian L.↗
DOE OSTI2020

Fluid model for the piezothermal effect

When a gas in an externally imposed potential field is compressed, temperature gradients appear. This has been called the piezothermal effect. It is possible to analytically calculate the time-dependent behavior of the piezothermal effect using a linearized fluid model. Quantitative differences between the fluid-model results and previous numerical calculations can be explained by the effects of viscosity and heat conductivity. Here, the fluid model casts the piezothermal effect as a spectrum of buoyancy oscillations, which yields new physical insights into the effect.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Non-linear MHD modelling of edge localized modes suppression by resonant magnetic perturbations in ITER

Edge localized modes (ELMs) suppression by resonant magnetic perturbations (RMPs) was studied with the non-linear magneto-hydro-dynamic (MHD) code JOREK for the ITER H-mode scenarios at 15 MA, 12.5 MA, 10 MA/5.3 T. In this study, the main aim was to demonstrate that ELMs can be suppressed by RMPs while the divertor 3D footprints of heat and particle fluxes remain within divertor material limits. The unstable peeling–ballooning modes responsible for ELMs without RMPs were modelled first for each scenario using numerically accessible parameters for ITER. Then the stabilization of ELMs by RMPs was modelled with the same parameters. RMP spectra, optimized by the linear MHD MARS-F code, with main toroidal harmonics N = 2, N = 3, N = 4 have been used as boundary conditions of the computational domain of JOREK, including realistic RMP coils, main plasma, scrape off layer (SOL) divertor and realistic first wall. The model includes all relevant plasma flows: toroidal rotation, two fluid diamagnetic effects and neoclassical poloidal friction. With RMPs, the main toroidal harmonic and the non-linearly coupled harmonics remain dominant at the plasma edge, producing saturated modes and a continuous MHD turbulent transport thereby avoiding ELM crashes in all scenarios considered here. The threshold for ELM suppression was found at a maximum RMP coils current of 45 kAt–60 kAt compared to the coils maximum capability of 90 kAt. In the high beta poloidal steady-state 10 MA/5.3 T scenario, a rotating QH-mode without ELMs was observed even without RMPs. In this scenario with RMPs N = 3, N = 4 at 20 kAt maximum current in RMP coils, similar QH-mode behaviour was observed however with dominant edge harmonic corresponding to the main toroidal number of RMPs. The present MHD modelling was limited in time by few tens of ms after RMPs were switched on until the magnetic energy of the modes saturates. As a consequence the thermal energy was still evolving on this time scale, far from the ITER confinement time scale and hence only the form of 3D footprints on the divertor targets can be indicated within this set-up. Also note, that the divertor physics was missing in this model, so realistic values of fluxes are out of reach in this modelling. However the stationary 3D divertor and particle fluxes could be simply extrapolated from these results to the stationary situation considering that a large power fraction should be radiated in the core and SOL and only about 50 MW power is going to the divertor, which is an arbitrary, but reasonable number used here. The 3D footprints with RMPs show the characteristic splitting with the main RMP toroidal symmetry. The maximum radial extension of the footprints typically was ~20 cm in inner divertor and ~40 cm in outer divertor with stationary heat fluxes decreasing further out from the initial strike point from ~5 MW m ₋2 to ~1 MW m ₋2 assuming a total power in the divertor and walls is 50 MW. The heat fluxes remain within the divertor target and baffle areas, however with rather small margin in the outer divertor which could be an issue for the first wall especially in transient regimes when part of the plasma thermal energy is released due to switching on the RMP coils. This fact should be considered when RMPs are applied with a more favorable application before or soon after the L–H transition, although optimization is required to avoid increasing the L–H power threshold with RMPs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1992

An integrated development of the equations of motion for elastic hypersonic flight vehicles

An integrated, consistent analytical framework is developed for modeling the dynamics of elastic hypersonic flight vehicles. A Lagrangian approach is used in order to capture the dynamics of rigid-body motion, elastic deformation, fluid flow, rotating machinery, wind, and a spherical rotating earth model, and to account for their interactions with each other. A vector form of the force, moment and elastic-deformation equations is developed from Lagrange's equation; a useable scalar form of these equations is also presented. The appropriate kinematic equations are developed, and are presented in a useable form. A preliminary study of the significance of selected terms in the equations of motion is conducted. Using generic data for a single-stage-to-orbit vehicle, it was found that the Coriolis force can reach values of up to 6 percent of the vehicle weight, and that the forces and moments attributable to fluid-flow terms can be significant.

Bilimoria, Karl D.↗
NASA NTRSDate not supplied

Computational Fluid Dynamic Optimization of an Experimental Rotating Detonation Rocket Engine Nozzle

A parametric optimization study is performed on the nozzle of a laboratory rotating detonation rocket engine (RDRE) using a three-dimensional computational fluid dynamic simulation. The primary optimization objective is maximum nozzle thrust. The basic nozzle configuration is a shrouded, truncated plug. The fluid in the RDRE chamber leading to the nozzle is choked at its exit so that its cyclic behavior is unaffected by any changes to the nozzle design. Optimization is performed for a single operating point. Parameters varied are the overall nozzle area expansion ratio and the fraction of the expansion area that is provided by the shroud. These two parameters indirectly affect the angle of the plug nozzle cone, and the bluff body area associated with its truncation. Nozzle thrust is evaluated as the difference between the thrust of the RDRE chamber-plus-nozzle combination and that of the chamber alone. The nozzle produces approximately 20% of the total engine thrust. The baseline nozzle is found to perform well, yielding 58.1% of the thrust calculated for a notional ideal RDRE nozzle which can instantaneously change shape to allow isentropic expansion of every fluid element. Optimization improves the performance, bringing the nozzle thrust to 70.0% of the notional ideal, and total engine thrust (chamber-plus-nozzle) to 94% of the ideal.

detonation↗
NASA NTRSDate not supplied

Computational Fluid Dynamic Optimization of an Experimental Rotating Detonation Rocket Engine Nozzle

A parametric optimization study is performed on the nozzle of a laboratory rotating detonation rocket engine (RDRE) using a three-dimensional computational fluid dynamic simulation. The primary optimization objective is maximum nozzle thrust. The basic nozzle configuration is a shrouded, truncated plug. The fluid in the RDRE chamber leading to the nozzle is choked at its exit so that its cyclic behavior is unaffected by any changes to the nozzle design. Optimization is performed for a single operating point. Parameters varied are the overall nozzle area expansion ratio and the fraction of the expansion area that is provided by the shroud. These two parameters indirectly affect the angle of the plug nozzle cone, and the bluff body area associated with its truncation. Nozzle thrust is evaluated as the difference between the thrust of the RDRE chamber-plus-nozzle combination and that of the chamber alone. The nozzle produces approximately 20% of the total engine thrust. The baseline nozzle is found to perform well, yielding 58.1% of the thrust calculated for a notional ideal RDRE nozzle which can instantaneously change shape to allow isentropic expansion of every fluid element. Optimization improves the performance, bringing the nozzle thrust to 70.0% of the notional ideal, and total engine thrust (chamber-plus-nozzle) to 94% of the ideal.

detonation↗
NASA NTRS1972

Convection in the tanks of a rotating spacecraft

A general study of convection and mixing of a stratified fluid in a rotating container is described, with application to the special problem of fluid heating and convection in a spacecraft tank. The analysis was based on a set of approximate equations for the Navier-Stokes description of fluid convection with small density variations in a rotating system, including effects of body forces due to temperature stratification (caused by a heater) and arbitrary time-dependent rotation of the tank about a noncentral axis. An efficient numerical finite difference scheme and computational method are described for the convection of vorticity and energy in a two-dimensional tank. Special procedures were developed for analysis of the thermodynamic states resulting from the approximate flow equations derived for small density variations. Results of the numerical simulation are presented for studying the effectiveness of rotation maneuvers in mixing stratified oxygen in the tanks of an Apollo spacecraft. Significant effects of the rotation maneuvers are discussed, including the reduction of the potential for pressure collapse.

Source record↗
NASA NTRS1994

Low-frequency modes and nonbarotropic effects in pseudo-Newtonian accretion disks

A recently developed formalism is used to reexamine the question of the existence of hydrodynamical modes that pulsate with very low frequencies in the inner regions of accretion disks. The formalism is valid in an exact sense for the adiabatic pulsations of rotating Newtonian fluids that are generally nonbarotropic (such as those with 'nonadiabatic temperature gradients,' for example), and hence its application in the present context represents an improvement over previous analyses that are more approximate. The formalism is applied to thin non-self-gravitating disks, with the gravitational potential of the central source modified in the usual way in order to simulate relativistic effects. In the barotropic limit, the analyses indicate that in many cases nearly Keplerian disks exhibit nonaxisymmetric modes of pulsation that are trapped in the inner disk regions, with pulsation periods much longer than the dynamical timescale. These results are similar to those of earlier calculations that assume disks pulsate without changing the temperature distribution. A method is developed for including lowest order nonbarotropic effects. Previous analyses have been incapable of accurately treating the nonbarotropic regime. The application of the present method to the low-frequency modes reveals that, due to unexpected cancellations among terms, the nonbarotropic correction to the pusation frequency omega is only of order tilde-omega(sub BV exp 2) omega, where tilde-omega(sub BV) is the appropriate dimensionless Brunt-Vaisala frequency. This correction is much smaller than the expected correction of order tilde-omega(sub BV) Omega, where Omega is the rotation angular velocity. The important conclusion drawn from this is that nonbarotropic corrections are generally small and hence that low-frequency modes persist into the nonbarotropic regime. For disk temperatures appropriate to X-ray emission, the adiabatic frequencies of trapped modes are of the same order as the frequencies associated with quasi-periodic oscillations (QPOs) of certain low-mass X-ray binaries and other X-ray sources. It is suggested that further consideration be given to the possiblity that modulation of emission processes by these modes can explain at least some of the QPO phenomena.

Ipser, James R.↗
DOE OSTI2023

Motion of a viscous slug on heterogeneous surfaces: crossover from stick–slip to steady sliding

We present a theoretical study of viscous slug motion inside a microscopically rough capillary tube, where pronounced stick–slip motion can emerge at slow displacement rates. The mathematical description of this intermittent motion can be reduced to a system of ordinary differential equations, which also describe the motion of a pendulum inside a fluid-filled rotating drum. We use this analogy to show that the stick–slip motion transitions to steady sliding at high displacement rates. We characterize this crossover with a simple scaling relation and show that the crossover is accompanied by a shift in the dominant energy dissipation mechanisms within the system.

Mechanics↗
DOE OSTI2021

Tendencies of enhanced electronic nematicity in the Hubbard model and a comparison with Raman scattering on high-temperature superconductors

The pseudogap regime of the cuprate high-temperature superconductors is characterized by a variety of competing orders, the nature of which are still widely debated. Recent experiments have provided evidence for electron nematic order, in which the electron fluid breaks rotational symmetry while preserving translational invariance. Raman spectroscopy, with its ability to symmetry resolve low energy excitations, is a unique tool that can be used to assess nematic fluctuations and nematic ordering tendencies. Here we compare results from determinant quantum Monte Carlo simulations of the Hubbard model to experimental results from Raman spectroscopy in La 2-x Sr x CuO 4 , which show a prominent increase in the B 1g response around 10% hole doping as the temperature decreases, indicative of a rise in nematic fluctuations at low energy. Finally, our results support a picture of nematic fluctuations with B 1g symmetry occurring in underdoped cuprates, which may arise from melted stripes at elevated temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Dynamic Phase Alignment in Inertial Alfvén Turbulence

In weakly collisional plasma environments with sufficiently low electron beta, Alfvénic turbulence transforms into inertial Alfvénic turbulence at scales below the electron skin depth, k ⊥ d e ≳ 1. We argue that, in inertial Alfvénic turbulence, both energy and generalized kinetic helicity exhibit direct cascades. We demonstrate that the two cascades are compatible due to the existence of a strong scale dependence of the phase alignment angle between velocity and magnetic field fluctuations, with the phase alignment angle scaling as cos α k ∝ $k$$^{–1}_{⊥}$. The kinetic and magnetic energy spectra scale as ∝ $k$$^{–5/3}_{⊥}$ and ∝ $k$$^{–11/3}_{⊥}$, respectively. As a result of the dual direct cascade, the generalized helicity spectrum scales as ∝ $k$$^{–5/3}_{⊥}$, implying progressive balancing of the turbulence as the cascade proceeds to smaller scales in the k ⊥ d e >> 1 range. Turbulent eddies exhibit a phase-space anisotropy k ∥ ∝ $k$$^{5/3}_{⊥}$, consistent with critically balanced inertial Alfvén fluctuations. Furthermore, our results may be applicable to a variety of geophysical, space, and astrophysical environments, including the Earth’s magnetosheath and ionosphere, solar corona, and nonrelativistic pair plasmas, as well as to strongly rotating nonionized fluids.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1967

A study of seeded rotating arcs.

Neutral carrier gas and slightly ionized plasma binary mixture model for nonhomogeneous seeding effects on rotating arc performance

ROTATING FLUID↗