Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “robust links”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

DMSK: A practical 2400-bps receiver for the mobile satellite service: An MSAT-X Report

The partical aspects of a 2400-bps differential detection minimum-shift-keying (DMSK) receiver are investigated. Fundamental issues relating to hardware precision, Doppler shift, fading, and frequency offset are examined, and it is concluded that the receiver's implementation at baseband is more advantageous both in cost and simplicity than its IF implementation. The DMSK receiver has been fabricated and tested under simulated mobile satellite environment conditions. The measured receiver performance in the presence of anomalies pertinent to the link is presented in this report. Furthermore, the receiver behavior in a band-limited channel (GMSK) is also investigated. The DMSK receiver performs substantially better than a coherent minimum-shift-keying (MSK) receiver in a heavily fading environment. The DMSK radio is simple and robust, and results in a lower error floor than its coherent counterpart. Moreover, this receiver is suitable for burst-type signals, and its recovery from deep fades is fast.

Davarian, F.↗

Adaptive Strategies for Controls of Flexible Arms

An adaptive controller for a modern manipulator has been designed based on asymptotical stability via the Lyapunov criterion with the output error between the system and a reference model used as the actuating control signal. Computer simulations were carried out to test the design. The combination of the adaptive controller and a system vibration and mode shape estimator show that the flexible arm should move along a pre-defined trajectory with high-speed motion and fast vibration setting time. An existing computer-controlled prototype two link manipulator, RALF (Robotic Arm, Large Flexible), with a parallel mechanism driven by hydraulic actuators was used to verify the mathematical analysis. The experimental results illustrate that assumed modes found from finite element techniques can be used to derive the equations of motion with acceptable accuracy. The robust adaptive (modal) control is implemented to compensate for unmodelled modes and nonlinearities and is compared with the joint feedback control in additional experiments. Preliminary results show promise for the experimental control algorithm.

Yuan, Bau-San↗

Development of Polyimides-Based NLO Materials for Electrooptical Applications

Development of thermally stable optical materials for nonlinear optics have recently focused on the covalent incorporation of NLO chromophores into high performance polymers, especially thermally stable and processable polyamides. One key aspect for the incorporation of robust NLO chromophores into high Tg polymers is to sustain poling induced order. Other advantages include high loading level of chromophores, and elimination of possible phase separation as well as chromophore sublimation at processing or working temperature. We have prepared several polyimide based polymers which are covalently linked with thermally stable chromophores that we have developed, since polyamides generally exhibit high Tg and good film transparency. Here, we report the development and subsequent incorporation of indoline based chromophores into polyamides, leading to thermally stable NLO polymers.

Rutherford, Jacqueline↗

The robust application of computed torque control to manipulators subject to saturation

A technique is presented which allows use of an exact linearization (EL) control for robot manipulators for those cases when actuator saturation cannot be ignored. A modification of a nonlinear dynamic compensation technique that has been successfully used in the feedback amplifiers is applied to a case of a nonredundant manipulator. Computer simulation for a two-link planar robot arm illustrates the advantages of the modified computed torque technique compared to the traditional linear full state control.

Lokshin, Anatole↗

Plant canopy transpiration in bioregenerative life support systems - The link between mechanistic and empirical models

A model of water transpiration in a plant canopy that combines two approaches is presented. The first approach is to account for underlying physical processes, while the second is to empirically incorporate transpiration data now being generated at the Johnson Center Variable Pressure Growth Chamber. The two approaches, physical modeling and data analysis, make it possible to produce a model that is more robust than either the standard first-principles model or a straightforward empirical model. It is shown that the present transpiration model is able to efficiently capture the dynamic behavior of the plant canopy over the entire range of environmental parameters now envisioned to be important in an operating controlled ecological life support system (CELSS). Examples of the use of this model in assessing plant canopy dynamics and CELSS design options are also presented.

Sirko, Robert J.↗

NASA and Industry Benefits of ACTS High Speed Network Interoperability Experiments

This paper provides synopses of the design. implementation, and results of key high data rate communications experiments utilizing the technologies of NASA's Advanced Communications Technology Satellite (ACTS). Specifically, the network protocol and interoperability performance aspects will be highlighted. The objectives of these key experiments will be discussed in their relevant context to NASA missions, as well as, to the comprehensive communications industry. Discussion of the experiment implementation will highlight the technical aspects of hybrid network connectivity, a variety of high-speed interoperability architectures, a variety of network node platforms, protocol layers, internet-based applications, and new work focused on distinguishing between link errors and congestion. In addition, this paper describes the impact of leveraging government-industry partnerships to achieve technical progress and forge synergistic relationships. These relationships will be the key to success as NASA seeks to combine commercially available technology with its own internal technology developments to realize more robust and cost effective communications for space operations.

Zernic, M. J.↗

Compass Final Report: Venus Bridge Orbiter and Surface Study (V-BOSS)

The Venus Bridge Orbiter and Surface Study (V-BOSS) Compass concurrent engineering design team study shows that new, high-priority Venus science can be achieved using a linked Orbiter + Surface Element (Lander) mission concept within a $200M cost cap with assumptions. This is feasible through optimizing investment in early technologies and platforms, such as the Long-Lived In-Situ Solar System Explorer (LLISSE), leveraging known and flight-ready technology, and the overall use of simple, small, robust systems in innovative approaches to Venus exploration. This architecture allows a range of science investigations through modification of Orbiter-Lander platforms in this study through choice of other instruments (often sensors), science themes, or operational modes. In particular, a fundamental strength of this approach is to provide science not available in other ways by using simplified architectures including rugged systems operable in-situ on the Venus surface. Such investigations would be pathfinders for more complex, and more expensive, future missions. Additionally, the results of this study can be used to further champion the need, value and return of early investment technology programs for the hard problem of in-situ investigations at Venus.

Venus Bridge↗

Canadian and Alaskan Wildfire Smoke Particle Properties, Their Evolution and Controlling Factors, From Satellite Observations

The optical and chemical properties of biomass burning (BB) smoke particles greatly affect the impact that wildfires have on climate and air quality. Previous work has demonstrated some links between smoke properties and factors such as fuel type and meteorology. However, the factors controlling BB particle speciation at emission are not adequately understood nor are the factors driving particle aging during atmospheric transport. As such, modeling wildfire smoke impacts on climate and air quality remains challenging. The potential to provide robust, statistical characterizations of BB particles based on ecosystem type and ambient environmental conditions with remote sensing data is investigated here. Space-based Multi-angle Imaging SpectroRadiometer (MISR) observations, combined with the MISR Research Aerosol (RA) algorithm and the MISR Interactive Explorer (MINX) tool, are used to retrieve smoke plume aerosol optical depth (AOD) and to provide constraints on plume vertical extent; smoke age; and particle size, shape, light-absorption properties, and absorption spectral dependence. These tools are applied to numerous wildfire plumes in Canada and Alaska, across a range of conditions, to create a regional inventory of BB particle-type temporal and spatial distribution. We then statistically compare these results with satellite measurements of fire radiative power (FRP) and land cover characteristics, as well as short-term climate, meteorological, and drought information from the Modern-Era Retrospective analysis for Research and Applications (MERRA-2) reanalysis and the North American Drought Monitor. We find statistically significant differences in the retrieved smoke properties based on land cover type, with fires in forests producing the thickest plumes containing the largest, brightest particles and fires in savannas and grasslands exhibiting the opposite. Additionally, the inferred dominant aging mechanisms and the timescales over which they occur vary systematically between land types. This work demonstrates the potential of remote sensing to constrain BB particle properties and the mechanisms governing their evolution over entire ecosystems. It also begins to realize this potential, as a means of improving regional and global climate and air quality modeling in a rapidly changing world.

Katherine T. Junghenn Noyes↗

Accelerated Strength Testing of Thermoplastic Composites

Constant ramp strength tests on unidirectional thermoplastic composite specimens oriented in the 90 deg. direction were conducted at constant temperatures ranging from 149 C to 232 C. Ramp rates spanning 5 orders of magnitude were tested so that failures occurred in the range from 0.5 sec. to 24 hrs. (0.5 to 100,000 MPa/sec). Below 204 C, time-temperature superposition held allowing strength at longer times to be estimated from strength tests at shorter times but higher temperatures. The data indicated that a 50% drop in strength might be expected for this material when the test time is increased by 9 orders of magnitude. The shift factors derived from compliance data applied well to the strength results. To explain the link between compliance and strength, a viscoelastic fracture model was investigated. The model, which used compliance as input, was found to fit the strength data only if the critical fracture energy was allowed to vary with temperature reduced stress rate. This variation in the critical parameter severely limits its use in developing a robust time-dependent strength model. The significance of this research is therefore seen as providing both the indication that a more versatile acceleration method for strength can be developed and the evidence that such a method is needed.

Reeder, J. R.↗

A Robust Method to Integrate End-to-End Mission Architecture Optimization Tools

End-to-end mission simulations include multiple phases of flight. For example, an end-to-end Mars mission simulation may include launch from Earth, interplanetary transit to Mars and entry, descent and landing. Each phase of flight is optimized to meet specified constraints and often depend on and impact subsequent phases. The design and optimization tools and methodologies used to combine different aspects of end-to-end framework and their impact on mission planning are presented. This work focuses on a robust implementation of a Multidisciplinary Design Analysis and Optimization (MDAO) method that offers the flexibility to quickly adapt to changing mission design requirements. Different simulations tailored to the liftoff, ascent, and atmospheric entry phases of a trajectory are integrated and optimized in the MDAO program Isight, which provides the user a graphical interface to link simulation inputs and outputs. This approach provides many advantages to mission planners, as it is easily adapted to different mission scenarios and can improve the understanding of the integrated system performance within a particular mission configuration. A Mars direct entry mission using the Space Launch System (SLS) is presented as a generic end-to-end case study. For the given launch period, the SLS launch performance is traded for improved orbit geometry alignment, resulting in an optimized a net payload that is comparable to that in the SLS Mission Planner's Guide.

Lugo, Rafael↗

New Estimates of Ice and Oxygen Fluxes Across the Entire Lid of Lake Vostok From Observations of Englacial Radio Wave Attenuation

Over deep Antarctic subglacial lakes, spatially varying ice thickness and the pressure‐dependent melting point of ice result in distinct areas of melting and freeze‐on at the ice‐water interface, that is, at the lake lid. These ice mass fluxes drive lake circulation and, because basal Antarctic ice contains air clathrate, affect the input of oxygen to the lake, with implications for subglacial life. Inferences of rates of melting and freeze‐on, that is, accretion rates, from radar layer tracking and geodesy are limited in spatial coverage and resolution. Here we develop a new method to estimate accretion rate, and the resulting oxygen input at a lake lid, using airborne radar data over Lake Vostok together with ice‐temperature and chemistry data from the Vostok ice core. Because the lake lid is a coherent reflector of known reflectivity (at our radar frequency), we can infer depth‐averaged radio wave attenuation in the ice, with a spatial resolution of ~1 km along flight lines. Spatial variation in attenuation depends mostly on variation in ice temperature near the lid, which in turn varies strongly with ice mass flux at the lid. We model ice temperature versus depth with ice mass flux as a parameter, thus linking that flux to observed depth‐averaged attenuation. The resulting map of melt and accretion rates independently reproduces features known from earlier studies but now covers the entire lid. We find that freeze‐on is dominant when integrated over the lid, with an ice imbalance of 0.05 to 0.07 cu.km/year, which is robust against uncertainties.

Dale P. Winebrenner↗

Proposed Development of NASA Glenn Research Center's Aeronautical Network Research Simulator

Accurate knowledge and understanding of data link traffic loads that will have an impact on the underlying communications infrastructure within the National Airspace System (NAS) is of paramount importance for planning, development and fielding of future airborne and ground-based communications systems. Attempting to better understand this impact, NASA Glenn Research Center (GRC), through its contractor Computer Networks & Software, Inc. (CNS, Inc.), has developed an emulation and test facility known as the Virtual Aircraft and Controller (VAC) to study data link interactions and the capacity of the NAS to support Controller Pilot Data Link Communications (CPDLC) traffic. The drawback of the current VAC test bed is that it does not allow the test personnel and researchers to present a real world RF environment to a complex airborne or ground system. Fortunately, the United States Air Force and Navy Avionics Test Commands, through its contractor ViaSat, Inc., have developed the Joint Communications Simulator (JCS) to provide communications band test and simulation capability for the RF spectrum through 18 GHz including Communications, Navigation, and Identification and Surveillance functions. In this paper, we are proposing the development of a new and robust test bed that will leverage on the existing NASA GRC's VAC and the Air Force and Navy Commands JCS systems capabilities and functionalities. The proposed NASA Glenn Research Center's Aeronautical Networks Research Simulator (ANRS) will combine current Air Traffic Control applications and physical RF stimulation into an integrated system capable of emulating data transmission behaviors including propagation delay, physical protocol delay, transmission failure and channel interference. The ANRS will provide a simulation/stimulation tool and test bed environment that allow the researcher to predict the performance of various aeronautical network protocol standards and their associated waveforms under varying density conditions. The system allows the user to define human-interactive and scripted aircraft and controller models of various standards, such as (but not limited to) Very High Frequency Digital Link (VDL) of various modes.

Nguyen, Thanh C.↗

Robust Routing Protocol For Digital Messages

Refinement of ditigal-message-routing protocol increases fault tolerance of polled networks. AbNET-3 is latest of generic AbNET protocols for transmission of messages among computing nodes. AbNET concept described in "Multiple-Ring Digital Communication Network" (NPO-18133). Specifically aimed at increasing fault tolerance of network in broadcast mode, in which one node broadcasts message to and receives responses from all other nodes. Communication in network of computers maintained even when links fail.

Marvit, Maclen↗

Optimal matrix approximants in structural identification

Problems of model correlation and system identification are central in the design, analysis, and control of large space structures. Of the numerous methods that have been proposed, many are based on finding minimal adjustments to a model matrix sufficient to introduce some desirable quality into that matrix. In this work, several of these methods are reviewed, placed in a modern framework, and linked to other previously known ideas in computational linear algebra and optimization. This new framework provides a point of departure for a number of new methods which are introduced here. Significant among these is a method for stiffness matrix adjustment which preserves the sparsity pattern of an original matrix, requires comparatively modest computational resources, and allows robust handling of noisy modal data. Numerical examples are included to illustrate the methods presented herein.

Beattie, C. A.↗

Emerging CFD technologies and aerospace vehicle design

With the recent focus on the needs of design and applications CFD, research groups have begun to address the traditional bottlenecks of grid generation and surface modeling. Now, a host of emerging technologies promise to shortcut or dramatically simplify the simulation process. This paper discusses the current status of these emerging technologies. It will argue that some tools are already available which can have positive impact on portions of the design cycle. However, in most cases, these tools need to be integrated into specific engineering systems and process cycles to be used effectively. The rapidly maturing status of unstructured and Cartesian approaches for inviscid simulations makes suggests the possibility of highly automated Euler-boundary layer simulations with application to loads estimation and even preliminary design. Similarly, technology is available to link block structured mesh generation algorithms with topology libraries to avoid tedious re-meshing of topologically similar configurations. Work in algorithmic based auto-blocking suggests that domain decomposition and point placement operations in multi-block mesh generation may be properly posed as problems in Computational Geometry, and following this approach may lead to robust algorithmic processes for automatic mesh generation.

Aftosmis, Michael J.↗

Alternate Communications Spectrum Study (ACSS) for Aviation Data Links (ADL)

The aim of the work was to identify the key factors involved in the use of alternate spectrum in various bands for a future integrated CNS data link. The study focused on systems and spectral bands that can deliver VDL-or-higher data rates in a two-way communication setting (including air-ground, ground-air, and air-air modes of operation), with multiple platforms (aircraft) operating in the same local environment. We begin with a review of the initial task list, and the final task list. The final task list contained a focus upon spectral availability and related systems that could be affected by the deployment of a new aviation data link (ADL) system. Most of this addresses the lower few layers of the communications protocol stack. A brief review of current related efforts in the aeronautical community is then provided, in which we describe several systems and programs of interest. Participation in some of these efforts is recommended. We also delineate several of the advantages and disadvantages of these system/efforts, in view of anticipated requirements of a new ADL. Desired attributes of a new ADL system are then discussed, and a connection with existing systems is made. The need to consider a wider set of alternative systems and technologies is described, and the beneficial aspects of a particular transmission technique- spread spectrum-are discussed. We then discuss in more detail several potential spectral regions, in terms of propagation conditions, available technology, spectrum availability, and waveform selection. Some comments on the need for standardization are also provided. We note that none of the existing systems described will likely meet the full range of desired features of a new ADL, but that several systems and spectral regions offer promise in terms of one or more characteristics. A system design and analysis approach is then provided. In this, we again focus on the lower few layers of the protocol stack, and aim to capture the main features and parameters that must be selected in the design. Two appendices show example versions and initial results of the first few technical steps in the design approach. Some conclusions are then drawn, and in the final section, recommendations are provided, the most important of which are repeated here: 1. Continue the effort begun here. As detailed in this report, we have only uncovered much of the work that needs to be done in order to provide the foundation for a flexible, high- performance, robust ADL. 2. Seize the opportunity to begin testing in the MLS band. The wide bandwidths and low level of usage of this band make it an ideal one for proof-of-concept type testing. Other (non- aeronautical) organizations are likely to make claims on the band if it is not being used. The primary conclusion is that there is a real and pressing need for a new aviation data link. vi

Matolak, David W.↗

A robust line extraction and matching algorithm

This paper presents an algorithm for extracting straight lines from intensity mages and describes a line matching algorithm for solving the line correspondence problem. The line extraction process begins by detecting edges in the intensity image. Next, line support regions are formed where image points (pixels) have similar gradient orientation. A line fitting algorithm is then used to fit a line to the points in the line support region based on a least means square fitting algorithm. Finally, line segments are linked together to form the final lines by using an adaptive line linking method; this results in much stronger lines and a smaller set of lines to be considered. Once the lines are detected in a sequence of images, a line matching algorithm is used to match lines in one image to the lines in the other image. The images are either from a motion or stereo sequence. The matched lines may then be used with the sensor position and orientation data to estimate range to objects corresponding to the lines. We present results based on applying the line extraction and line matching algorithms to a synthetic image and an outdoor scene captured by a camera on a helicopter.

Hussien, B.↗

Essential SpaceWire Hardware Capabilities for a Robust Network

The Geostationary Operational Environmental Satellite R-Series Program (GOES-R) mission is a joint program between National Oceanic & Atmospheric Administration (NOAA) and National Aeronautics & Space Administration (NASA) Goddard Space Flight Center (GSFC). GOES-R project selected SpaceWire as the best solution to satisfy the desire for simple and flexible instrument to spacecraft command and telemetry communications. GOES-R development and integration is complete and the observatory is scheduled for launch October 2016. The spacecraft design was required to support redundant SpaceWire links for each instrument side, as well as to route the fewest number of connections through a Slip Ring Assembly necessary to support Solar pointing instruments. The final design utilized two different router designs. The SpaceWire standard alone does not ensure the most practical or reliable network. On GOES-R a few key hardware capabilities were identified that merit serious consideration for future designs. Primarily these capabilities address persistent port stalls and the prevention of receive buffer overflows. Workarounds were necessary to overcome shortcomings that could be avoided in future designs if they utilize the capabilities, discussed in this paper, above and beyond the requirements of the SpaceWire standard.

SpaceWire↗