SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
High resolution micro-computed tomography images of sandstone from the Mt. Simon formation at different depths. These images provide an insight into the pore structure of the Mt. Simon sandstone (e.g. for potential CO2 storage). This data set can be used to further study the formation as a whole..
With support from the Department of Energy’s Water Power Technologies Office, Pacific Northwest National Laboratory (PNNL) has developed new tools that incorporate cutting-edge climate and hydrological science capabilities to assess the potential long-term impacts of future climate conditions on unregulated streamflow and water temperature within watershed-river-reservoir systems. The objectives of this project were achieved by enhancing key hydrologic and hydrodynamic models and transferring them to a high-performance computing environment to provide a high-spatiotemporal resolution, multi-scale modeling framework. The new modeling framework has the potential to quantify risks related climate change impacts on runoff, unregulated streamflow, and water temperature. Initial development and demonstration of the modeling framework was conducted under historical and future climate conditions in the Columbia River Basin in the Pacific Northwest and the Connecticut River Basin in New England.
Using the 2017 Hurricane Harvey flood event as a test case, this study set up a series of sensitivity analyses to highlight three challenges associated with large-scale flood inundation modeling, including (a) model parameterization, (b) errors in digital elevation models, and (c) effects of reservoir retention. Driven by radar-based hourly rainfall data, a series of hydrologic-hydraulic models including the VIC hydrologic model, RAPID routing model, and Flood2D-GPU hydrodynamic model are set up over Harris County, Texas, to simulate flood inundation and hazards. The results demonstrate the importance of hydrologic parameters in improving flood modeling. For a large flood event such as Hurricane Harvey, the effect of the initial water depths is insignificant. The Manning's n values may increase the peak water depth by ~1%, the flood extents by 65km 2 , and the high danger zone by ~6%. On the contrary, the bathymetry correction factors may reduce the flood extent by ~1.4% and the high-danger zone by ~4%. Reducing the reservoir storage capacity to 1% may increase the flood extent by ~4% and the high-danger zone by ~17%. This study may provide supporting information to guide and prioritize the development of future high-performance computing hydrodynamic large-scale flood simulations.
The poromechanical properties of unconventional reservoir materials are in large part dictated by their mineralogy. Since these properties govern the response to stress experienced during hydraulic fracturing, fluid production, and fluid injection, they play a central role in the formation of microcracks or bedding delaminations which ultimately dominate mass transport. In this work we study access to the porosity of end member unconventional reservoir materials, where the end members are predominantly dictated by carbonate content. Access to the porosity is quantified using state of the art 3D x-ray computed tomography coupled with physics informed data analytics. Xenon gas, which attenuates x-rays, provides a spatiotemporal map of access to the porosity. The accessible porosity is quantified over a range of net confining stress relevant to the manmade disturbances listed above. These experiments demonstrate that heavily carbonated mudstones are nearly impermeable at the core (~ cm) scale, while carbonate free analogues afford better access to the microstructure. Consistent with previous qualitative 2D radiographs, access to the interior of the clastic mudstones is first observed along planar microcracks, followed by slow penetration into the surrounding matrix. Physics informed data analytics of the 3D tomography measurements presented here show that these microcracks do not permit uniform access to the adjacent rock matrix. In addition, variation of the effective pressure elucidates the mechanisms that govern fracture/matrix fluid exchange. Under conditions consistent with hydrocarbon production fluid accumulates in the immediate vicinity of the nearest microcrack. While there is clear evidence that, as intended, part of this accumulation is from the more distant matrix, fluid is also squeezed out of the microcrack. The fluid build-up at the microcrack indicates that migration out of the rock is hindered by the coupled poroelastic response of the microcrack and adjacent rock matrix. We show that these mechanisms ultimately account for the meager oil recovery factors realized in practice. These insights have implications for making reservoir scale predictions based on core scale observations, and provide a basis for devising new asset development techniques to access more porosity, and enhance fluid extraction. Finally, these findings shed light on key features and mechanisms that govern shale storage capacity, with relevance to other important industrial processes, such as geologic CO 2 storage.
The impact of fines migration on fracture transmissivity reduction was investigated by injecting a brine solution containing a suspension of 0.1 wt. % kaolinite particles with a mean particle size distribution of 9.6 µm through fractured shale core samples. The fractures had apertures estimated to be approximately 100 µm. A mass balance approach was used to determine the quantity of kaolinite that was deposited within the fractures (influent – effluent = amount deposited in fractures). Large fractions (44 to 90%) of the suspended kaolinite pumped through the fractures were deposited within the fractures. Based on fracture volumes estimated with X-ray computed tomography, it was determined that approximately 10 to 17% of the fracture volume was filled with kaolinite at the point when flow was completely restricted. These results indicate that 100 µm fractures in CO 2 reservoir caprocks could be sealed within hours if the brines passing through the fractures contain a proportional volume of particulates to the tests performed in this laboratory study.
Interactions between rock minerals and hydraulic fluids directly impact the geochemical and geomechanical properties of shale formations. However, the mechanisms of geochemical reactions in shale unconventional reservoirs remain poorly understood. Here, to investigate the geochemical reactions between shale and hydraulic fracturing fluids, a series of batch reactor experiments were undertaken. Three rock samples with different mineralogical compositions and three fluid samples of different compositions (deionized water, deionized water + 2% potassium chloride (KCl), and deionized water + 0.5% choline chloride (C 5 H 14 ClNO) were used. Experiments were undertaken at reservoir temperature and atmospheric pressure. Elemental compositions of effluents after 1, 3, 7, 14, 28 days were analyzed using Inductively Couple Plasma Mass Spectrometry (ICP-MS). Medical Computed Tomography (CT) scan and X-ray Fluorescence (XRF) were conducted on the entire core run to help upscale results obtained from rock-fluid interaction experiments. Geochemical modeling using a reactive simulator, TOUGHREACT, was undertaken to corroborate experimental results. Results show that lower pH triggered high dissolution rates in the rock samples, especially the carbonate components. As pH increased, the rate of dissolution declined significantly, though for most cases dissolution still continued. Observed dissolved silica concentrations were much higher than the quartz solubility, suggesting that much of the silica originates from more soluble silica polymorphs and possibly desorption from clay mineral exchange sites. Concentration of most elemental species in solution increased but aluminium and magnesium concentrations declined rapidly following initial entry into solution. Geochemical modeling corroborated the conclusions regarding mineral dissolution and precipitation observed from experiments, notably; the dissolution of calcite and oxidation of pyrite in reacted shale samples, the likely presence of silica polymorphs such as opal, chalcedony or amorphous silica in these samples, and the reduction of Al and Mg concentrations in solution by precipitation of secondary aluminosilicate phases. The de-flocculation of clay minerals during reaction implies fines migration after hydraulic fracturing. This is detrimental to reservoir productivity as clay fines are displaces and lodged within the micro and nano-fractures created during fracturing. The immediate consumption of aluminium and magnesium also has implications on blockage of hydrocarbon pathways due to precipitation of new minerals in these locations.
Slickwater hydraulic fracturing is becoming a prevalent approach to economically recovering shale hydrocarbon. It is very important to understand the proppant’s transport behavior during slickwater hydraulic fracturing treatment for effective creation of a desired propped fracture geometry. The currently available models are either oversimplified or have been performed at limited length scales to avoid high computational requirements. Another limitation is that the currently available hydraulic fracturing simulators are developed using only single-sized proppant particles. Motivated by this, in this work, a computationally efficient, three-dimensional, multiphase particle-in-cell (MP-PIC) model was employed to simulate the multi-size proppant transport in a field-scale geometry using the Eulerian–Lagrangian framework. Instead of tracking each particle, groups of particles (called parcels) are tracked, which allows one to simulate the proppant transport in field-scale geometries at an affordable computational cost. Then, we found from our sensitivity study that pumping schedules significantly affect propped fracture surface area and average fracture conductivity, thereby influencing shale gas production. Motivated by these results, we propose an optimization framework using the MP-PIC model to design the multi-size proppant pumping schedule that maximizes shale gas production from unconventional reservoirs for given fracturing resources.
Polymeric materials are ubiquitous in modern society and they play an instrumental role in almost all industries, undoubtedly including the energy and environment sectors. Increased demand of energy and awareness to sustainability both necessitates the development of novel polymers with enhanced properties. Unfortunately, their structural and behavioral complexity render such discovery challenging and impeded. To address this problem, scientists are developing various computational modeling techniques and leveraging their power to depict the relationship between structural characteristics of polymers and their properties (such as rheological behaviors), and use such prediction to guide the design and syntheses of novel polymeric materials with enhanced performances. Unfortunately, predicting the relationships between polymer structure and composition with rheological properties via atomistic modeling is still a major challenge because of the extended time and length scales involved. Studying dynamic shear viscosity and linear viscoelasticity using molecular models requires capabilities that have been elusive, including representation of large molecular weight chains with an effective internal scale capable of describing entanglement, shear-rates that are in the s-1 scale with accurate quantitative stresses, and chemically-realistic combinations of both homogeneous and heterogeneous systems. Motivated by these unmet challenges, the overall technical objective of this DOE-STTR Phase II project is to develop robust molecular predictive methods for advanced polymer discovery and applications and especially for designing and demonstrating the “smart” polymer-based waterflooding enhanced oil recovery (EOR) process. In particular, we apply state-of-the-art molecular modeling methods developed by our academic partner, Materials Stimulation Center (MSC) at California Institute of Technology (Caltech), to facilitate and accelerate the experimental discovery processes. During the Phase I of this project, we had focused on development and demonstration of the molecular modeling methods to describe rheological properties of non-Newtonian polymer fluids, and to improve our fundamental understandings of shear-thickening mechanism and kinetics. In Phase II, we further apply the theoretical models to guide our experimental programs to improve our design of smart rheology modifier (SRM) polymers and their optimization for EOR. Specifically, we have three objectives in the Phase II study: (1) to further improve out computational modeling methods, coupling with the advanced machine learning algorithms; (2) to develop cost-effective and efficient SRM-flooding process suitable for EOR applications under typical reservoir conditions; and (3) to further explore the application of our molecular predictive models for innovative material discovery in other industrial applications. The recent development of our multiscale predictive framework allows the successful prediction of rheological properties from the chemical structure for polymers of experimentally relevant molecular weights, and provides an in-silico machine learning engine for screening novel compositions and structures with optimized non-Newtonian response, required for both shear-thinning and shear-thickening applications. Our framework provides: (1) procedures and tools for systematic coarsening from atomistic models and reverse mapping of coarse-grain models to atomistic, (2) unique ab initio methods to characterize the atomistic origin of colloidal and interfacial interactions and phenomena, (3) systematic structure and composition builders based on practical descriptors that drive rheological changes in polymer melts and diluted polymer mixtures, (4) a rheological properties engine capable of predicting viscosity in the zero-shear limit and under realistic dynamic conditions (for shear-rates commensurate with experiments) for large heterogeneous systems, (5) coarse-grain force fields with improved non-bond descriptions based on accurate quantum mechanics, (6) an in-silico screening machine learning engine that feeds from the systematic model builders to cover the descriptors search space, computes the rheological properties from converged trajectories spanning sub-milliseconds and ranks them for each structure/composition using an automated viscosity-vs-shear rate fitness function that can be tuned for shear-thickening, shear-thinning and other rheological responses.
Carbon capture and storage is being pursued globally as a geoengineering measure for reducing the emission of anthropogenic CO 2 the atmosphere. Comprehensive monitoring, verification, and accounting programs must be established for demonstrating the safe storage of injected CO 2 . One of the most commonly deployed monitoring techniques is time-lapse seismic reservoir monitoring (also known as 4-D seismic), which involves comparing 3-D seismic survey data taken at the same study site but over different times. Analyses of 4-D seismic data volumes can help improve the quality of storage reservoir characterization, track the movement of injected CO 2 plume, and identify potential CO 2 spillover/leakage from the storage reservoirblue. However, the derivation of high-resolution CO 2 saturation maps from 4-D seismic data is a highly nonlinear and ill-posed inverse problem, often requiring significant computational effort. In this research, we apply a physics-based deep learning method to facilitate the solution of both the forward and inverse problems in seismic inversion while honoring physical constraints. A cycle generative adversarial neural network (CycleGAN) model is trained to learn the bidirectional functional mappings between the reservoir dynamic property changes and seismic attribute changes, such that both forward and inverse solutions can be obtained efficiently from the trained model. We show that our CycleGAN-based approach not only improves the reliability of 4-D seismic inversion but also expedites the quantitative interpretation. Our deep learning-based workflow is generic and can be readily used for reservoir characterization and reservoir model updates involving the use of 4-D seismic data.
Implosions of Hohlraum-driven double shell targets as an alternative inertial confinement fusion concept are underway at the National Ignition Facility. The double shell system relies on a series of energy transfer processes starting from thermal x-ray absorption by the outer shell, followed by collisional transfer of kinetic energy to a heavy metal inner shell, and finally, conversion to the internal energy of the deuterium-tritium fuel. During each of these energy transfer stages, low-mode asymmetries can act to reduce the ideal transfer efficiency degrading double shell performance. Mechanisms, such as hard x-ray preheat from the Hohlraum, not only decrease the efficiency of kinetic energy transfer but may also be a source of low-mode asymmetry. In this article, we evaluate the shape transfer processes through the time of shell collision using two-dimensional integrated Hohlraum and capsule computations. We find that the dominant mode of the shape transfer is well described using a “radial impulse” model from the shape of the foam pressure reservoir. To evaluate the importance of preheat on inner shell shape, we also report on first measurements of Au L-shell preheat asymmetry in a double shell with a tungsten pusher. These measurements showed a 65% higher preheat velocity at the pole of the capsule relative to the equator. We also found that the experiments provided rigorous constraints by which to test the Hohlraum model settings that impact the amount and symmetry of Au L-shell preheat via the plasma conditions inside the outer cone Au bubble.
Numerous sessile drop and micro-computed tomography (micro-CT) studies have been conducted to quantify Geologic Carbon Storage formation wettability by measuring static contact angles (θ); however, the influence of pore geometry remains unknown. In this work, six sandstones (Bandera Brown, Berea, Bentheimer, Mt. Simon, Navajo, and Nugget) are used to measure θ using the two aforementioned experimental methods at identical testing conditions (45°C and 12.41 MPa). The range of θ measured at in situ conditions (micro-CT) exceeds those the range at ex situ (sessile drop method) conditions for all sandstones. However, when droplets with more representative in situ diameters are analyzed, θ averages show ex situ θ exceed those of in situ θ. Pore geometry does influence local θ, but the size of ex situ droplets relative to pore size appears to influence θ. This is an important to consider for future sessile drop studies used for analysis of CO 2 behavior in carbon storage reservoirs.
Carbon capture, utilization, and storage (CCUS) has been widely applied to enhance oil recovery (CO2-EOR). A thorough investigation of the impact of injecting CO2 into a heterogeneous reservoir is critical to understanding the overall reservoir robustness and storage performance. We conducted fifteen flow-through tests on Morrow B sandstone that allowed for chemical reactions between a CO2-rich brackish solution and the sandstones, and four creep/flow-through tests that simultaneously allowed for chemical reactions and stress monitoring. From fluid chemistry and X-ray computed tomography, we found that the dissolution of disseminated cements and the precipitation of iron-rich clays did not significantly affect the permeability and geomechanical properties. Minor changes in mechanical properties from Brazilian and creep tests indicated that the matrix structure was well-supported by early diagenetic quartz overgrowth cement and the reservoir’s compaction history at deep burial depths. However, one sample experienced a dissolution of poikilotopic calcite, leading to a permeability increase and significant tensile strength degradation due to pore opening, which overcame the effect of the early diagenetic cements. We concluded that the Morrow B sandstone reservoir is robust for CO2 injection. Most importantly, cement timing, the abundance and texture of reactive minerals, and the reservoir’s burial history are critical in predicting reservoir robustness and storage capacity for CO2 injection.
Deep learning models have shown promise in reservoir inflow prediction, yet their performance often deteriorates when applied to different reservoirs due to distributional differences, referred to as the domain shift problem. Domain generalization (DG) solutions aim to address this issue by extracting domain-invariant representations that mitigate errors in unseen domains. However, in hydrological settings, each reservoir exhibits unique inflow patterns, while some metadata beyond observations like spatial information exerts indirect but significant influence. This mismatch limits the applicability of conventional DG techniques to many-domain hydrological systems. To overcome these challenges, we propose HydroDCM, a scalable DG framework for cross-reservoir inflow forecasting. Spatial metadata of reservoirs is used to construct pseudo-domain labels that guide adversarial learning of invariant temporal features. During inference, HydroDCM adapts these features through light-weight conditioning layers informed by the target reservoir’s metadata, reconciling DG’s invariance with location-specific adaptation. Experiment results on 30 real-world reservoirs in the Upper Colorado River Basin demonstrate that our method substantially outperforms state-of-the-art DG baselines under many-domain conditions and remains computationally efficient.
Summary This paper will present a robust workflow to address multiobjective optimization (MOO) of carbon dioxide (CO2)-enhanced oil recovery (EOR)-sequestration projects with a large number of operational control parameters. Farnsworth unit (FWU) field, a mature oil reservoir undergoing CO2 alternating water injection (CO2-WAG) EOR, will be used as a field case to validate the proposed optimization protocol. The expected outcome of this work would be a repository of Pareto-optimal solutions of multiple objective functions, including oil recovery, carbon storage volume, and project economics. FWU’s numerical model is used to demonstrate the proposed optimization workflow. Because using MOO requires computationally intensive procedures, machine-learning-based proxies are introduced to substitute for the high-fidelity model, thus reducing the total computation overhead. The vector machine regression combined with the Gaussian kernel (Gaussian-SVR) is used to construct proxies. An iterative self-adjusting process prepares the training knowledge base to develop robust proxies and minimizes computational time. The proxies’ hyperparameters will be optimally designed using Bayesian optimization to achieve better generalization performance. Trained proxies will be coupled with multiobjective particle swarm Optimization (MOPSO) protocol to construct the Pareto-front solution repository. The outcomes of this workflow will be a repository containing Pareto-optimal solutions of multiple objectives considered in the CO2-WAG project. The proposed optimization workflow will be compared with another established methodology using a multilayer neural network (MLNN) to validate its feasibility in handling MOO with a large number of parameters to control. Optimization parameters used include operational variables that might be used to control the CO2-WAG process, such as the duration of the water/gas injection period, producer bottomhole pressure (BHP) control, and water injection rate of each well included in the numerical model. It is proved that the workflow coupling Gaussian-SVR proxies and the iterative self-adjusting protocol is more computationally efficient. The MOO process is made more rapid by squeezing the size of the required training knowledge base while maintaining the high accuracy of the optimized results. The outcomes of the optimization study show promising results in successfully establishing the solution repository considering multiple objective functions. Results are also verified by validating the Pareto fronts with simulation results using obtained optimized control parameters. The outcome from this work could provide field operators an opportunity to design a CO2-WAG project using as many inputs as possible from the reservoir models. The proposed work introduces a novel concept that couples Gaussian-SVR proxies with a self-adjusting protocol to increase the computational efficiency of the proposed workflow and to guarantee the high accuracy of the obtained optimized results. More importantly, the workflow can optimize a large number of control parameters used in a complex CO2-WAG process, which greatly extends its utility in solving large-scale MOO problems in various projects with similar desired outcomes.
Deep learning-based surrogate models have been widely applied in geological carbon storage (GCS) problems to accelerate the prediction of reservoir pressure and CO2 plume migration. Large amounts of data from physics-based numerical simulators are required to train a model to accurately predict the complex physical behaviors associated with this process. In practice, the available training data are always limited in large-scale 3D problems due to the high computational cost. Therefore, we propose to use a multi-fidelity Fourier neural operator (FNO) to solve large-scale GCS problems with more affordable multi-fidelity training datasets. FNO has a desirable grid-invariant property, which simplifies the transfer learning procedure between datasets with different discretization. Here, we first test the model efficacy on a GCS reservoir model being discretized into 110 k grid cells. The multi-fidelity model can predict with accuracy comparable to a high-fidelity model trained with the same amount of high-fidelity data with 81% less data generation costs. We further test the generalizability of the multi-fidelity model on a same reservoir model with a finer discretization of 1 million grid cells. This case was made more challenging by employing high-fidelity and low-fidelity datasets generated by different geostatistical models and reservoir simulators. We observe that the multi-fidelity FNO model can predict pressure fields with reasonable accuracy even when the high-fidelity data are extremely limited. The findings of this study can help for better understanding of the transferability of multi-fidelity deep learning surrogate models.
Summary The fast marching method (FMM)-based rapid flow simulation has been shown to accelerate simulation efficiency by orders of magnitude by transforming 3D simulation to equivalent 1D simulation using the concept of the “diffusive time of flight” (DTOF). However, the 1D transformation does not directly apply to multiwell problems. In this paper, we propose a novel DTOF-based multidomain multiresolution discretization scheme to accelerate multiwell simulation of unconventional reservoirs. Our method formulates multiwell simulation problems based on the DTOF which displays the pressure front propagation in unconventional reservoirs. The DTOF contours are used to partition the reservoir into local and shared domains. A local domain is where the flow is dominated by a single well, and the shared domain is where the fluid flow is influenced by multiple wells. The DTOF contours expand independently in local domains and interfere in the shared domain. After the partitioning, each domain is discretized using a multiresolution scheme whereby the original 3D fine mesh is preserved near the wells to account for detailed physics including gravity, and the rest of the domain is discretized into 1D mesh based on the DTOF contours to alleviate the simulation workload. The power and efficacy of our approach are demonstrated using synthetic and field-scale simulation models with different degrees of geologic and well-completion complexity. The simulation results, number of active cells, and computation time for the proposed discretization scheme are compared with the original high-fidelity 3D model for each case. The results show that the proposed method is suitable for multiwell simulation problems in unconventional reservoirs and can accelerate flow simulations by orders of magnitude with minimal loss of accuracy. The novelty of this work is the creation of DTOF-derived multiresolution discretization with local and shared domains to simplify and accelerate the calculation of subsurface flow problems, especially in unconventional reservoirs. Our workflow can be easily interfaced with commercial simulators, making it suitable for large-scale field applications.
Arctic soils (including permafrost) contain an untapped reservoir of microbial life, including viruses, that are trapped in a frozen state of low metabolic activity. However, as permafrost thaws, they can be revived and pose potential risks to human health and ecosystem stability. The current COVID-19 pandemic has highlighted the urgency of identifying potential pathogen reservoirs which may be activated under the impacts of climate change, as well as understanding the role of RNA viruses in dynamic environments. Here, we applied a new computational workflow (Wu et al. submitted) to identify and analyze RNA viruses from de-novo assemblies representing a total of 33 metatranscriptomes collected from four parallel transects across a range of fluctuating environmental gradients. This study provides the first characterization of RNA viral diversity within a permafrost ecosystem.
Deep learning (DL)--based surrogate models have achieved success in various applications in carbon capture and storage (CCS). However, the model training on high-dimensional spaces is computationally expensive and impractical for large-scale and complex geological models, because the models usually contain hundreds of thousands to millions of grid cells, each with a set of parameters. Furthermore, the high cost of generating training data with sufficient variation is another limitation of model training on high-dimensional spaces, which may result in overfitting and reduce the model efficiency and prediction performance. We proposed the workflow incorporating dimension reduction methods and deep learning models, which aim to extract the latent variables of input parameters and output state variables, and then build the mapping function at the latent spaces. The proposed workflow can significantly reduce the computational complexity in solving both forward and inverse problems compared to models trained on high-dimensional spaces. Dimensionality reduction models showed great potential in workflows for fast reservoir simulation, history matching, prior model generation, visualization, and more, ultimately enhancing DL model performance in related SMART Work Packages.