Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “refractory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Grossite-Rich Refractory Inclusions in Carbonaceous Chondrites: Evidence for Early Generation of Different O-Isotope Reservoirs in the Protoplanetary Disk and O-Isotope Exchange During Fluid-Rock Interaction

The oxygen isotopic composition of the Sun inferred from the measurements of the solar wind returned by the Genesis spacecraft is O-16-enriched (△O-17 = -28.4±3.6‰) relative to the whole-rock O-isotope compositions of chondrites and achondrites, and chondrule phenocrysts, which all plot close to the terrestrial fractionation line (△O-17 ∼ ±5‰). Vast majority of refractory inclusions (CAIs and AOAs) in carbonaceous chondrites of petrologic types 2-3.0 are iso-topically uniform and have solar-like △O-17. In contrast, CAIs and AOAs in metamorphosed CV and CO chondrites are isotopically heterogeneous with melilite, anorthite, perovskite, Zr- and Sc-rich oxides and silicates, and occasionally Al, Ti-diopside being O-16-depleted relative to hibonite, spinel, Al-diopside, and forsterite. The timing of generation of different O-isotope reservoirs and the nature of O-isotope heterogeneity in refractory inclusions in CO3 and CV3 chondrites are poorly known. Grossite (CaAl4O7) is one of the first minerals predicted to condense from a gas of solar composition and therefore it could have recorded isotopic compositions of reservoirs during the earliest stages of the Solar System evolution. Here we report on O-isotope compositions of grossite-rich CAIs in CH3 and CO3 chondrites measured in situ with the UH Cameca ims-1280. For analytical procedures see [9].

A N Krot↗
NASA NTRSDate not supplied

Analysis of Interlaminar Damage in Refractory Composites by In-Situ Micro-X-Ray Computed Tomography

Refractory composites are relevant for hot-structure applications on re-entry vehicles. To develop optimized high-performance hot structures, accurate material property data is required. Material properties that often limit design in two-dimensional (2-D) composites are interlaminar strengths. A better understanding of the failure mechanisms for interlaminar shear (ILS), interlaminar tension (ILT), and curved-beam interlaminar tension (CB-ILT) tests can provide insight on improving the design and fabrication of refractory composites. In-situ tests were performed to capture the progressive failure in American Society for Testing and Materials (ASTM) sized ILS (ASTM D3846), ILT (ASTM D7291), and CB-ILT (ASTM D6415) specimens. The present study investigates the change in material behavior by examining the macro porosity change in in-situ ILS tests, the mesoscale and inter-ply porosity changes in flatwise in-situ ILT tests and the change in per-ply delamination in in-situ CB-ILT tests.

In-situ Damage Characterization↗
NASA NTRS2024

Grossite-Bearing Refractory Inclusions from Reduced CV Chondrites: Mineralogical and Oxygen Isotopic Constraints on the Parent Body Alteration History

We report the results of coordinated mineralogical, microstructural, and oxygen isotopic analyses of grossite-bearing refractory inclusions from reduced CV (Vigarano type) chondrites to obtain a more complete picture of secondary parent body alteration processes and conditions. Grossite (CaAl 4 O 7 ) occurs in cores of nodules in fine-grained Ca,Al-rich inclusions (CAIs) that likely represent aggregates of nebular condensates. In many occurrences, grossite has been partially replaced by hercynite [(Fe,Mg,Zn)Al 2 O 4 ], which displays complex microstructures and compositions, and magnetite nanoparticles. The alteration of grossite was a crystallographically-controlled, fluid-driven process that occurred via partial dissolution of grossite and subsequent precipitation of hercynite and magnetite during short-lived and low-temperature metasomatic alteration on the CV chondrite parent body. The constituent phases of grossite-bearing CAIs show heterogeneous oxygen isotopic compositions, with grossite and perovskite displaying systematically 16O-depleted compositions (Δ 17 O = −12‰ to −1‰) relative to uniformly 16 O-rich hibonite and spinel (Δ 17 O = −25‰ to −21‰). Melilite is variably 16 O-depleted (Δ 17 O = −25‰ to −2‰). The observed oxygen isotopic distribution is interpreted as a result of mineralogically controlled oxygen isotopic exchange with an 16 O-poor fluid on the CV chondrite parent body. Collectively, the presence of limited fluids played an important role in preferential alteration of grossite to hercynite and magnetite and various degrees of 16O depletion in grossite, perovskite, and melilite during thermal metamorphism. We conclude that, among refractory phases in the inclusions, grossite was the most susceptible to metasomatic reactions with Fe-rich fluids and the second most susceptible, after perovskite, to oxygen isotopic exchange with an 16 O-poor fluid during the thermal history of the CV chondrite parent asteroid.

Calcium-aluminum-rich inclusions↗
NASA NTRSDate not supplied

Advanced Materials for the Lunar Surface: Multiscale Computational Design of Refractory Alloys and Carbides

Emerging operational environments, such as the lunar surface, present novel challenges for NASA and drive the need for advanced materials in applications like fission surface power systems. To address these demands, computational materials science is rapidly evolving to augment or replace costly and hazardous empirical testing. Although materials selection at NASA remains predominantly experimentally driven, advanced simulation methodologies are being steadily integrated into the engineering lifecycle. This work details the application of multiscale simulation techniques—including first-principles calculations, CALPHAD, dislocation dynamics, and molecular dynamics—at NASA's Ames Research Center to evaluate advanced materials for extreme environments. First, we present contributions to the Space Nuclear Propulsion Project. Be-cause propellant channel coatings in nuclear thermal rockets must withstand high-pressure, high-temperature hydro-gen, optimizing these materials is critical. First-principles calculations were employed to establish a rigorous quantitative and qualitative understanding of the behavior of the refractory carbides ZrC, NbC, and their mixtures in high-enthalpy hydrogen environments. This necessitated the generation of high-fidelity thermodynamic models for both stoichiometric and carbon-depleted carbides, both with and without the presence of hydrogen. Furthermore, we highlight efforts under the Refractory Alloy Additive Manufacturing Build Optimization (RAAMBO) project, where existing and novel alloy compositions were assessed for additive manufacturing printability and subsequent performance in applications such as heat pipes and rocket nozzle extensions. This was accomplished through a comprehensive multiscale simulation framework that bridged the gap from the nanometer to the millimeter scale. Across both initiatives, rigorous validation against empirical data was prioritized. By systematically employing a verified and validated computational frame-work, we demonstrate how simulation effectively supports multidisciplinary engineering efforts, builds project-wide confidence, and drives critical materials development.

computational materials↗
NASA NTRS2023

First Optical Constants of Laboratory-Generated Organic Refractory Materials (Tholins) Produced in the NASA Ames COSmIC Facility from the Visible to the Near Infrared (0.4–1.6 μm): Application to Titan’s Aerosols

We have measured the complex refractive indices, from 0.4 to 1.6μm, of five laboratory-generated organic refractory materials (tholins) produced at low temperature(150 K)using plasma chemistry in the stream of a supersonic expansion in NASA Ames’ COsmic SImulation Chamber(COSmIC)facility. Three samples were produced from N2:CH4gas precursors(with different voltages inducing different degrees of ionization in the plasma), one sample was produced from N2:CH4:C2H2, and one sample was produced from Ar:CH4in order to produce a purely carbonaceous sample. The optical constants, n and k, of the samples were determined using spectral reflectance measurements. We observe that both n and k appear to be correlated with the nitrogen content in the solid sample, with samples containing more nitrogen having higher n and k. Comparisons to previous laboratory studies and Titan aerosol optical constants derived from observations show that the COSmIC tholins with a higher nitrogen content (higher n and k)are closer analogs of Titan aerosols. We also present a new analysis of Cassini Visible Infrared Mapping Spectrometer observations of Titan’s atmosphere in the visible to near infrared using the COSmIC tholin optical constants in a radiative transfer model. The COSmIC tholin sample produced from N2:CH4with the lowest energy level has a spectral behavior that appears well suited to reproduce the observed Titan aerosol properties. This study has therefore demonstrated that this COSmIC tholin sample has valuable and promising optical properties for the analysis of Cassini’s Titan atmospheric observations.

Optical Constants↗
DOE OSTI2025

Deformation Behaviors in Single BCC‐Phase Refractory Multi‐Principal Element Alloys under Dynamic Conditions

The mechanical behavior and microstructural evolution of a BCC-phase NbTaTiV refractory multi-principal element alloy (RMPEA) is studied over a wide range of strain rates (10 −3 to 10 3 s −1 ) and temperatures (room temperature to 850 °C). The mechanical property of present RMPEA shows less strain-rate dependence and strong resistance to softening at high temperatures. Under high strain-rate loading, the formation of thin type-I twins is observed, which could lead to an increase in strain-hardening rates. However, this hardening mechanism competes with adiabatic heating effects, resulting in the deterrence of strain-hardening behaviors. In contrast, substantial strain-hardening occurs at cryogenic temperatures due to the formation of twins, which act as stronger barriers to dislocation motion and interact with each other. To further understand the different strain-hardening behaviors, density functional theory (DFT) calculations predict relatively low stacking fault energies and high twinning stress for the NbTaTiV RMPEA.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Microstructural, Oxidation, and Mechanical Behavior of NbTi-Based Refractory Alloys with 5 to 10 Pct Co, Cr, and Ni Additions

NbTi-based refractory alloys with additions of Co, Cr, and Ni represent an interesting medium-entropy alloy system with potential for protective oxide film formation, high strength, and ductility. This study investigates the microstructural evolution, oxidation behavior, and mechanical properties of NbTi-based alloys containing 5 to 10 at. pct Co, Cr, and Ni. CALPHAD predictions suggest that this composition range can be heat treated to obtain a predominantly body-centered cubic matrix phase. Mechanical properties, including microhardness, yield strength, maximum strength, and specific strength are evaluated through isothermal compression tests conducted between room temperature and 800 °C. The oxidation kinetics of these alloys are assessed through discontinuous oxidation tests. Parabolic oxidation kinetics were observed for NbTi–10Ni and NbTi–5Co, while linear oxidation kinetics were found for NbTi–10Cr and NbTi–10(CoCrNi). Microstructures and oxide layers are characterized using X-ray diffraction, electron backscatter diffraction, energy-dispersive X-ray spectroscopy, and scanning electron microscopy. All alloys exhibit significant mechanical softening between room temperature and 800 °C, with elastic-perfectly plastic flow observed at 800 °C. The addition of 10 pct Cr to NbTi resulted in two BCC phases up to 1050 °C, conflicting with CALPHAD predictions of a single-phase solid solution at this temperature, and resulting in higher flow stress at 800 °C. NbTi–10(CoCrNi) exhibited the lowest flow stress at 800 °C despite having more ‘cocktail effect’ potential and insufficient molar fractions of Co, Cr, or Ni to form a desirable protective oxide film.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Oxygen Effects and Selective Oxidation of Group IV Alloying Additions in Group V-Based Refractory Multi-principal Element Alloys

Refractory multi-principal element alloys (RMPEAs) hold significant potential for advancing ultra-high-temperature technologies due to their remarkable strength retention under these conditions. However, the beneficial effects of alloying on microstructural evolution and mechanical properties are often obscured by the presence of interstitial alloying elements. The intricate interactions between substitutional alloying elements of Groups IV, V, and VI and interstitial content, whether intentional or incidental, remain poorly understood. In this study, we investigate the impact of dissolved oxygen on the microstructural evolution and stability of RMPEAs primarily composed of Group V elements, Nb and V, along with Group IV elements Ti, Zr, and Hf. We show that the strong affinity of oxygen for Group IV elements Zr and Hf leads to the internal precipitation of oxides during heat treatment, which competes with the homogenization of the as-cast dendritic microstructure. Here, we demonstrate that careful control and design of oxygen content and Group IV alloying additions are essential to minimize micro-segregation and prevent the detrimental precipitation of internal oxides. To address these challenges, we propose employing non-equilibrium solidification calculations to predict and optimize as-cast solidification structures, thereby reducing the reliance on homogenization processes.

Alloy design↗
DOE OSTI2025

Doping Effects on the Ductility of a Lightweight Refractory High-Entropy Alloy: Grain Boundary and Bulk Lattice Aspects

Doping elements in small amounts often segregate to grain boundaries (GBs) in alloys and can significantly impact mechanical properties and performance. Refractory high-entropy alloys (RHEAs) are known for their poor ductility, especially at low temperatures. Promoting GB cohesion through segregation can be an effective approach to mitigate embrittlement. Here, in this study, first-principles density functional theory (DFT) calculations were performed to examine the effects of important interstitial dopants (O, B, C, and N) and substitutional dopants (Cr, Y, La, and Ce) on the Σ5(310) [001] tilt GB of a lightweight RHEA Nb 32.5 Ti 27.5 Mo 22.5 Ta 12.5 Hf 2.5 Zr 2.5 . The DFT calculations reveal that certain dopants, such as B, C, Cr, N, and Y, exhibit favorable GB strengthening effects by improving bonding interactions with the bulk alloy. The impact of doping on the ductility parameter of the bulk lattice, defined as the ratio of surface energy to unstable stacking fault energy for the {110} <111> slip system, was also studied; and the results show that doping reduces the intrinsic ductility of the alloy, decreasing the D-parameter from 2.90 to 2.55, depending on the specific dopant. The present findings provide a foundational understanding at atomic level of the effect of representative dopants on mechanical properties of RHEAs and can be used to guide future alloy design for improved mechanical properties.

deformation charge density↗
DOE OSTI2025

Dynamic and static corrosion of chromium-alumina refractory in simulated nuclear waste glass

Monofrax® K-3, a chromium–alumina refractory, is widely used in nuclear waste glass melters due to its high durability. However, aggressive vitrification conditions still lead to corrosion that limits melter lifespan. Here, this study investigates two key corrosion modes, subsurface and melt-line corrosion, under static and dynamic conditions, using a custom setup enabling precise control of melt velocity and temperature. Experimental results, interpreted using diffusion-limited dissolution models, show that (i) subsurface corrosion increases by approximately 10% per mm/s increase in melt velocity, while melt-line corrosion remains virtually unaffected, (ii) corrosion rate dependence on temperature is inversely proportional to melt viscosity, and (iii) glass composition affects both corrosion modes similarly, based on Cr 2 O 3 , Al 2 O 3 , and alkali contents. The experimental data also allowed the determination of diffusion coefficients of major dissolving species, which were found to be consistent between the melt-line and subsurface corrosion models, indicating their suitability for future CFD studies.

12 - MGMT OF RADIOACTIVE AND NON-RADIOACTIVE WASTE↗
DOE OSTI2025

Investigation of residual stress distribution in wire-arc directed energy deposited refractory molybdenum alloy utilizing numerical thermo-mechanical analysis and neutron diffraction method

Directed energy deposition (DED), a metal additive manufacturing (AM) technique, offers higher deposition rates and energy efficiency, making it suitable for fabricating components from refractory molybdenum alloys, such as molybdenum-titanium-zirconium (TZM). However, large thermal gradients and non-equilibrium thermal cycles in DED could generate high residual stress in the component, potentially deteriorating quality and performance. Thus, this study aims to investigate residual stress generation and its distribution in wire-arc DED of TZM thin-wall, utilizing thermo-mechanical analysis and high-fidelity neutron diffraction (ND) method. Two interpass temperatures (50°C and 200°C) have been considered to investigate their impact on residual stress formation. During experiments, in-situ thermal data has been recorded using thermocouples, which have been utilized for calibrating the thermal model. Thermocouple data shows a good agreement with the simulation results, having a difference of less than 10 %. Post-deposition part deformation has been observed, which is measured using a coordinate measuring machine, showing maximum values of 0.93 mm and 0.78 mm for interpass temperatures of 50°C and 200°C, respectively. Numerical predictions of distortion deviated by less than 15% from the experimental results. ND measurement and simulation results indicate that residual stress magnitude and evolution vary across the TZM deposits, revealing microstructural anisotropy in both conditions. Notably, lower interpass temperatures resulted in higher residual stresses, confirmed by experimental and simulation data. Further, this study demonstrated that an integrated experimental and thermo-mechanical analysis can potentially reveal the temperature history, part deformation, and residual stress formation in wire-arc DED TZM alloy.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Multi-physics melt pool modeling and process optimization for laser direct energy deposition of Nb-based refractory C103: Defect formation, geometric precision, and process mapping

Recent developments in additive manufacturing (AM) technology have reignited interest in the fabrication of the Nb-based refractory C103 alloy offering solutions to the challenges posed by traditional manufacturing methods. However, the limited numerical and experimental studies on laser direct energy deposition (DED) of C103 have hindered the understanding of the relationships between process parameters and build quality. This has made it challenging to consistently produce parts with the desired quality and microstructure suitable for critical applications. In this study, we focus on optimizing the laser DED process for C103 by employing a hybrid approach that combines experimental techniques and computational fluid dynamics (CFD). This approach facilitates the development of process maps for defect detection and geometric precision. To achieve this, multi-layer C103 samples were fabricated using laser DED under various process parameters, enabling the creation of a process map for defect detection. Additionally, a multi-physics, multiphase simulation framework was developed within a high-performance computing (HPC) environment to establish process maps for geometric precision. Using these process maps, printability windows were identified for achieving both the desired geometric accuracy and defect-free prints. It was observed that prints with a power-to-velocity (P/V) ratio close to unity resulted in defect-free outcomes. This study provides a foundation for reducing design lead time and rejected parts, ultimately optimizing the laser DED process for C103.

Defect formation and geometric precision↗
DOE OSTI2024

Influence of high-strain-rate compression and subsequent heat treatment on (TiNbZr) 89 (AlTa) 11 refractory high-entropy alloys: Dynamic-mechanical behavior and microstructural changes

This study explored the dynamic-mechanical behavior of a novel low-density (TiNbZr) 89 (AlTa) 11 refractory high-entropy alloy (RHEA) across strain rates ranging from 1.0×10 3 to 3.5×10 3 s –1 . A significant increase in the yield and ultimate compressive strengths with rising strain rates up to 3.0×10 3 s –1 was observed and attributed to enhanced dislocation activities and stress-induced microstructural transformations. The formation of the B2 phase and Zr 5 Al 3 precipitates was found to be crucial in bolstering the alloy strength at high strain rates. Beyond strain rates of 3.0×10 3 s –1 , a decrease in strength occurred due to thermal softening and strain localization. Microstructural analyses at 3.5×10 3 s –1 revealed grain refinement, the development of micro shear bands, and dislocation tangles, which were indicative of dynamic recrystallization. Besides, the findings also revealed that the post-dynamic compression heat treatment further enhanced the hardness and microstructural stability of the alloy. These results highlight the potential of the (TiNbZr) 89 (AlTa) 11 RHEA for applications requiring materials with high strength-to-weight ratios, particularly in dynamically loaded environments. It is expected that the results of this study will further advance our fundamental understanding of the behavior of RHEAs under extreme conditions, thereby opening new avenues for material innovation.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Additively manufactured refractory high-entropy alloys with superior radiation resistance

Refractory high-entropy alloys (RHEAs) are promising candidates for next-generation nuclear and high-temperature applications. Among many approaches to manufacture RHEAs, additive manufacturing (AM) represents the most recent and advanced metal manufacturing method which allows near-net-shape manufacturing to reduce material waste and post-processing time. However, performance of AM RHEAs under complex irradiation conditions remains largely unexplored. Here, in this study, we demonstrate for the first time the response of directed energy deposition (DED) AM quaternary RHEAs (HfTaVW, CrTaVW) subjected to sequential dual-beam ion irradiation, consisting of helium pre-implantation followed by high-dose heavy ion bombardment. Compositions of DED AM RHEAs were selected using Monte Carlo (MC) simulations based on a cluster expansion (CE) Hamiltonian parameterized by density functional theory (DFT). Post-irradiation microstructural characterization revealed that the AM RHEA maintained remarkable stability, with suppressed helium bubble growth and reduced defect accumulation compared to conventional alloys. Even at high doses (∼100 dpa), the alloy exhibited no void swelling, a low density of dislocation loops, and no evidence of severe degradation. These results highlight the intrinsic ability of AM-derived microstructures and multicomponent chemistry to synergistically mitigate irradiation effects. Our findings establish AM RHEAs as a class of materials with superior resistance to radiation damage under conditions relevant to advanced fusion and fission environments and demonstrate the importance of sequential ion beam studies in evaluating their long-term performance.

36 MATERIALS SCIENCE↗