Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “redox cycling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A Thermodynamic Investigation of Ni on Thin-Film Titanates (ATiO3)

Thin, ~1-nm films of CaTiO3, SrTiO3, and BaTiO3 were deposited onto MgAl2O4 by Atomic Layer Deposition (ALD) and then studied as catalyst supports for ~5 wt % of Ni that was added to the perovskite thin films by Atomic Layer Deposition. Scanning Transmission Electron Microscopy demonstrated that both the Ni and the perovskites uniformly covered the surface of the support following oxidation at 1073 K, even after redox cycling, but large Ni particles formed following a reduction at 1073 K. When compared to Ni/MgAl2O4, the perovskite-containing catalysts required significantly higher temperatures for Ni reduction. Equilibrium constants for Ni oxidation, as determined from Coulometric Titration, indicated that the oxidation of Ni shifted to lower PO2 on the perovskite-containing materials. Based on Ni equilibrium constants, Ni interactions are strongest with CaTiO3, followed by SrTiO3 and BaTiO3. The shift in the equilibrium constant was shown to cause reversible deactivation of the Ni/CaTiO3/MgAl2O4 catalyst for CO2 reforming of CH4 at high CO2 pressures, due to the oxidation of the Ni.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1981

Requirements for optimization of electrodes and electrolyte for the iron/chromium Redox flow cell

Improved catalyzation techniques that included a pretreatment of carbon substrate and provided normalized carbon surface for uniform gold deposition were developed. This permits efficient use of different batches of carbon felt materials which initially vary significantly in their physical and surface chemical properties, as well as their electrochemical behavior. Further modification of gold impregnation technique gave the best performing electrodes. In addition to the linear sweep voltammetry, cyclic voltammetry was used to determine the effects of different activation procedures on the Cr(3)/Cr(2) Redox and H2 evolution reactions. The roles of carbon, gold and lead in the overall Redox cycle are identified. The behavior of the electrodes at both normal battery operating potentials and more extreme potentials is discussed preparing efficient and stable electrodes for the energy storage battery is implicated.

Jalan, V.↗
NASA NTRS1992

The role of certain infauna and vascular plants in the mediation of redox reactions in marine sediments

The mechanisms by which certain animals and plants affect redox processes in sediments was examined by studying three environments: (1) subtidal sediments dominated by the deposit-feeding polychaete Heteromastus filiformis; (2) a saltmarsh inhabited by the tall form of Spartina alterniflora; and (3) tropical carbonate sediments inhabited by three species of seagrasses. S-35-sulfide production rates were compared to pool sizes of dissolved sulfide and dissolved iron. In all of the sediments studied, rates of sulfide reduction were enhanced by macroorganisms while the rate of turnover of dissolved sulfide increased. The polychaete enhanced microbial activity and redox cycling primarily by subducting particles of organic matter and oxidized iron during sediment reworking. The Spartina species enhanced anaerobic activity by transporting primarily dissolved organic matter and oxidants. Although the final result of both animal and plant activities was the enhancement of sub-surface cycling of sulfur and iron, decreased dissolved sulfide and increased dissolved iron concentrations, the mechanisms which produced these results differed dramatically.

Hines, Mark E.↗
NASA NTRS2002

Activation of c-Jun N-terminal kinase and apoptosis in endothelial cells mediated by endogenous generation of hydrogen peroxide

Reactive oxygen species have been implicated in the activation of signal transduction pathways. However, extracellular addition of oxidants such as hydrogen peroxide (H2O2) often requires concentrations that cannot be readily achieved under physiological conditions to activate biological responses such as apoptosis. Explanations for this discrepancy have included increased metabolism of H2O2 in the extracellular environment and compartmentalization within the cell. We have addressed this issue experimentally by examining the induction of apoptosis of endothelial cells induced by exogenous addition of H2O2 and by a redox cycling agent, 2,3-dimethoxy-1,4-naphthoquinone, that generates H2O2 in cells. Here we show that low nanomolar steady-state concentrations (0.1-0.5 nmol x min(-1) x 10(6) cells) of H2O2 generated intracellularly activate c-Jun N terminal kinase and initiate apoptosis in endothelial cells. A comparison with bolus hydrogen peroxide suggests that the low rate of intracellular formation of this reactive oxygen species results in a similar profile of activation for both c-Jun N terminal kinase and the initiation of apoptosis. However, a detailed analysis reveals important differences in both the duration and profile for activation of these signaling pathways.

Non-NASA Center↗
NASA NTRS1998

Ceruloplasmin copper induces oxidant damage by a redox process utilizing cell-derived superoxide as reductant

Oxidative damage by transition metals bound to proteins may be an important pathogenic mechanism. Ceruloplasmin (Cp) is a Cu-containing plasma protein thought to be involved in oxidative modification of lipoproteins. We have previously shown that Cp increased cell-mediated low-density lipoprotein (LDL) oxidation by a process requiring cell-derived superoxide, but the underlying chemical mechanism(s) is (are) unknown. We now show that superoxide reduction of Cp Cu is a critical reaction in cellular LDL oxidation. By bathocuproine disulfonate (BCS) binding and by superoxide utilization, we showed that exogenous superoxide reduces a single Cp Cu atom, the same Cu required for LDL oxidation. The Cu atom remained bound to Cp during the redox cycle. Three avenues of evidence showed that vascular cells reduce Cp Cu by a superoxide-dependent process. The 2-fold higher rate of Cp Cu reduction by smooth muscle cells (SMC) compared to endothelial cells (EC) was consistent with their relative rates of superoxide release. Furthermore, Cp Cu reduction by cells was blocked by Cu,Zn superoxide dismutase (SOD1). Finally, the level of superoxide produced by EC and SMC was sufficient to cause the amount of Cu reduction observed. An important role of Cp Cu reduction in LDL oxidation was suggested by results showing that SOD1 inhibited Cp Cu reduction and LDL oxidation by SMC with equal potency, while tumor necrosis factor-alpha stimulated both processes. In summary, these results show that superoxide is a critical cellular reductant of divalent transition metals involved in oxidation, and that protein-bound Cu is a substrate for this reaction. The role of these mechanisms in oxidative processes in vivo has yet to be defined.

NASA Discipline Regulatory Physiology↗
NASA NTRS2010

Novel Thermotolerant Siderophilic Filamentous Cyanobacterium that Produces Intracellular Iron-Rich Phases

Cyanobacteria are the main producers of organic compounds in iron-depositing hot springs despite photosynthetically generated-oxygen and the abundance of reduced iron (Fe2+) that likely leads to enormous oxidative stress within cyanobacterial cells. Therefore, the study of cyanobacterial diversity, phylogeny, and biogeochemical activity in iron-depositing hot springs will not only provide insights into the contribution of CB to iron redox cycling in these environments, but it could also provide insights into CB evolution. This study characterizes the phylogeny, morphology, and physiology of isolate JSC-1, a novel filamentous CB isolated from an iron-depositing hot spring. While isolate JSC-1 is morphologically similar to the CB genus Leptolyngbya, 16S rDNA sequence data indicated that it shares 95 percent sequence similarity to the type strain L. boryanum. Strain JSC-1 fixes N2 and exhibited an unusually high ratio between photosystem (PS) I and PS II and was capable of complementary chromatic adaptation. Further, it synthesized only chlorophyll a and a unique set of carotenoids. Strain JSC-1 not only required high levels of Fe for growth (greater than or equal to 40 microM), but it also accumulated large amounts of extracellular ferrihydrite and generated intracellular ferric phosphates. Strain JSC-1 was found to secrete 2-oxoglutaric acid and possesses one ortholog and one paralog of bacterioferritin. Surprisingly, the latter has 70.13 % identity with a bacterioferritin in marine-proteobacterium HTCC 2080 and has joint node with bacterioferritins found in enterobacteria. Collectively, these observations provide insights into the physiological strategies that might have allowed CB to develop and proliferate in Fe-rich environments. Based on its genotypic and phenotypic characterization of strain, JSC-1 represents a new operational taxonomical unit (OTU) JSC-1.

Broun, Igor I.↗
DOE OSTI2024

Non-Electricity Based Renewable Fuels: Theory and Computation for Solar Thermochemical Hydrogen

Dominated by photovoltaics and wind, current renewable energy sources generate mostly electricity, but 80% of the global final energy consumption occurs in form of fuels. Therefore, direct solar fuel generation would be a major breakthrough for the energy transition. Solar thermochemical hydrogen (STCH) is one of the very few potential routes towards scalable renewable fuels, but currently suffers from lack of an oxide working material that could optimally perform energy conversion within the thermodynamic boundary conditions. Theory and computation can contribute in two distinct ways, through materials search and discovery, but also by providing detailed mechanistic models for specific systems so to advance our understanding of possible design strategies. To enable high-throughput materials screening, we developed a defect graph neural network (dGNN) machine learning approach,[1] which accelerates the prediction of defect formation energies by replacing the tedious density functional theory (DFT) supercell calculations for all possible defect sites. This approach enables high-throughput database screening of oxides, which was integrated with thermodynamic modeling to extract the reduction entropies as additional selection criterion for STCH. Once potential candidate materials are identified, detailed models can guide materials design by predicting performance characteristics. One challenge is to quantitatively predict thermochemical equilibria at high concentrations when the redox active defects start to interact with each other, thereby impeding the formation of additional defects. Introducing a model for the free energy of defect interaction, parametrized on the basis of DFT data, we simulated the complete STCH redox cycle for (Sr,Ce)MnO3 alloys, achieving near-quantitative agreement with experimental data.[2] The analysis of these simulations reveals how defect interactions diminish the reduction entropy and H2 yield, suggesting to include these interactions in design considerations. Finally, we revisit the popular van't Hoff method for analyzing reduction enthalpies and entropies. This method is not ideal, as it involves a temperature-dependent convolution of gas-phase and solid-state entropies, causing uncertainties in the same order of magnitude as the physical quantities of interest. To avoid this problem, we suggest a simple alternative approach which can be applied to experimental and simulated data alike.

first-principles calculations↗
DOE OSTI2024

Nuclear Fuel and Pu Redox Studies from The Glenn T. Seaborg Institute at Idaho National Laboratory

The Glenn T. Seaborg Institute at Idaho National Laboratory (INL-GTSI) focuses on advancing fundamental research in the actinide sciences by providing unique opportunities to early career scientists and engineers to gain experience studying the actinide elements and their associated systems. The INL-GTSI is built from three focus areas that are based on the expertise and supporting infrastructure at INL and include solid state chemistry and physics, solution phase chemistry and physics, and forensic and isotope science. INL is the lead Laboratory for nuclear energy research and development in the U. S. and the research on nuclear fuels performed under the INL-GTSI gives good examples of solid state studies. Uranium-Molybdenum (U-Mo) alloys are leading fuel candidates for conversion of high performance research and test reactors to low-enriched fuels. During irradiation, generated fission gas accumulates into bubbles and self-organizes into a gas bubble superlattice (GBS) that effectively stores fission gases and inhibits fuel swelling. A study on the early self- organizing behavior of the GBS shows that not only grain boundaries but the interfaces between the U-Mo matrix and uranium carbide (UC) impurities are important to GBS formation.[1] In solution, understanding the complex redox behavior of plutonium in aqueous environments is critical for establishing optimized nuclear waste reprocessing solvent systems and storage tank environments. INL-GTSI researchers have produced an experimentally validated multi-scale model of the gamma radiation induced behavior of plutonium ions in concentrated aqueous HNO3 solutions.[2] Here, gamma radiation effected only minimal steady state changes in the redox distribution of the plutonium oxidation states. The redox cycling between Pu(IV) and Pu(III) is demonstrated to be mediated by the •OH/NO3• radical oxidation of Pu(III) and the H2O2/HNO3 driven reduction of Pu(IV). The INL-GTSI offers young researchers the unique chance to work directly with actinide bearing materials in a U. S. National Laboratory environment. Further topical areas of interest to the INL-GTSI include, but are not limited to, fundamental actinide properties, structure/property (electronic, magnetic, thermal) relations, actinide quantum criticality, f- electron interactions, electron correlations, computational studies, new phases, defect effects, interface interactions, isotope production and separation, forensic analytical chemistry, structure and dynamic properties of actinides in non-aqueous media, separations chemistry and kinetics for advanced nuclear fuel cycles, radiation effects, and innovative and advanced ligand design for complexation of the actinides.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Treyson Ricks - Intern Showcase Poster

Quinone-based sorbents offer a tunable, energy-efficient route to electrochemical CO2 capture, but systematic guidance for molecular design is lacking. Here, we report a high-throughput computational workflow that combines density functional theory (DFT) screening with machine-learning (ML) modeling to evaluate CO2 binding thermodynamics across several quinone derivatives, spanning benzoquinones, naphthoquinones, and anthraquinones. In addition to using solvents to stabilize the quinone anion and dianion, we studied the effect of ion-pairing on the reduction potentials and the CO2 binding energy. Automated Python scripts handled geometry optimizations and adduct-formation energies on an HPC cluster, reducing manual effort significantly. This integrated platform can uncover structure–property relationships and enables rapid in silico evaluation of untested candidates. We present one example from our workflow to showcase the capability of using quinones with ion-pairing to effectively capture CO2. Our approach paves the way for the rational selection of optimal quinone sorbents and can be extended with experimental thermochemical and kinetic data, alternative redox cycles, and stability assessments to accelerate development of next-generation electrochemical CO2 capture materials.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗
DOE OSTI2022

Connecting Material Properties and Redox Flow Cell Cycling Performance through Zero-Dimensional Models

Improvements in redox flow battery (RFB) performance and durability can be achieved through the development of new active materials, electrolytes, and membranes. While a rich design space exists for emerging materials, complex tradeoffs challenge the articulation of unambiguous target criteria, as the relationships between component selection and cycling performance are multifaceted. Here, we derive zero-dimensional, analytical expressions for mass balances and cell voltages under galvanostatic cycling, enabling direct connections between material/electrolyte properties, cell operating conditions, and resulting performance metrics (e.g., energy efficiency, capacity fade). To demonstrate the utility of this modeling framework, we highlight several considerations for RFB design, including upper bound estimation, active species decay, and membrane/separator conductivity-selectivity tradeoffs. Furthermore, we also discuss modalities for extending this framework to incorporate kinetic losses, distributed ohmic losses, and multiple spatial domains. Importantly, because the mass balances are solved analytically, hundreds of cycles can be simulated in seconds, potentially facilitating detailed parametric sweeps, system optimization, and parameter estimation from cycling experiments. More broadly, this approach provides a means for assessing the impact of cell components that simultaneously influence multiple performance-defining processes, aiding in the elucidation of key descriptors and the identification of favorable materials combinations for specific applications.

25 ENERGY STORAGE↗
DOE OSTI2023

Elucidating the Effects of Temperature on Nonaqueous Redox Flow Cell Cycling Performance

The impact of cell temperature is a relatively underexplored area within the burgeoning field of nonaqueous redox flow batteries (NAqRFBs). Here, we investigate the effect of elevated temperature on the performance of nonaqueous redox electrolytes and associated flow cells. Using a model compound, N-(2-(2-methoxyethoxy)-ethyl)phenothiazine (MEEPT), in a propylene-carbonate-based electrolyte, we experimentally measure the temperature dependence of relevant physicochemical properties (i.e., electrolyte conductivity, viscosity, diffusivity) and electrochemical characteristics (i.e., chemical and electrochemical reversibility) across a temperature range of 30 °C to 70 °C. We then perform flow cell studies, finding that while ohmic and mass transport resistances decrease significantly with increases in temperature for the MEEPT/MEEPT +· redox couple, accessible electrolyte capacity gradually reduces at temperatures > 50 °C. Ex-situ, post-test characterization using microelectrode voltammetry suggests that this capacity fade is due to instability of the MEEPT radical cation. Finally, using MEEPT as a posolyte and a model viologen negolyte (bis(2-(2-methoxyethoxy)ethyl)viologen), we assemble a full cell and perform polarization analyses, observing a 2× increase in the peak power density when the operating temperature is increased from 30 °C to 70 °C. Broadly, this work highlights opportunities for systematic engineering of nonaqueous electrolytes and flow cells for higher power operation at elevated temperatures.

Electrochemistry↗
DOE OSTI2024

Phosphonate-based iron complex for a cost-effective and long cycling aqueous iron redox flow battery

Abstract A promising metal-organic complex, iron (Fe)-NTMPA 2 , consisting of Fe(III) chloride and nitrilotri-(methylphosphonic acid) (NTMPA), is designed for use in aqueous iron redox flow batteries. A full-cell testing, where a concentrated Fe-NTMPA 2 anolyte (0.67 M) is paired with a Fe-CN catholyte, demonstrates exceptional cycling stability over 1000 charge/discharge cycles, and noteworthy performances, including 96% capacity utilization, a minimal capacity fade rate of 0.0013% per cycle (1.3% over 1,000 cycles), high Coulombic efficiency and energy efficiency near 100% and 87%, respectively, all achieved under a current density of 20 mA·cm - ². Furthermore, density functional theory unveils two potential coordination structures for Fe-NTMPA 2 complexes, improving the understanding between the ligand coordination environment and electron transfer kinetics. When paired with a high redox potential Fe-Dcbpy/CN catholyte, 2,2′-bipyridine-4,4′-dicarboxylic (Dcbpy) acid and cyanide (CN) ligands, Fe-NTMPA 2 demonstrates a notably elevated cell voltage of 1 V, enabling a practical energy density of up to 9 Wh/L.

25 ENERGY STORAGE↗
DOE OSTI2024

Structural, Electrochemical, and (De)lithiation Mechanism Investigation of Cation-Disordered Rocksalt and Spinel Hybrid Nanomaterials in Lithium-Ion Batteries

Significant demand for lithium-ion batteries necessitates alternatives to Co- and Ni-based cathode materials. Cation-disordered materials using earth-abundant elements are being explored as promising candidates. Here, in this paper, we demonstrate a coprecipitation synthetic approach that allows direct preparation of disordered rocksalt Li 2.4 Fe 1.0 Ti 1.0 O 4.7 (r-LFTO·C) and spinel structured hybrid Li 0.5 Fe 1.0 Ti 0.9 O 3.2 ·C (s-LFTO·C) nanoparticles with a conformal conductive carbon coating. High-angle annular dark-field imaging coupled with electron energy loss spectroscopy mapping shows uniform Fe/Ti distribution with minor compositional variation among particles. Cation disorder was confirmed for both of the materials at an atomic level, with a short-range order more pronounced in r-LFTO·C. Operando X-ray absorption spectroscopy, ex situ hard X-ray photoelectron spectroscopy, ex situ soft X-ray absorption spectroscopy, and ex situ synchrotron X-ray diffraction were used to investigate (de)lithiation in the bulk and at the surface. Structurally, the r-LFTO·C demonstrated reversible partial Fe center migration between octahedral and tetrahedral sites during (de)lithiation. The r-LFTO·C evidenced that the redox of O was coincident with iron redox during initial electrochemical cycling, while iron redox dominated later cycling. In contrast, s-LFTO·C electrochemistry involved iron redox throughout the cycling process. The findings rationalize the differences in the electrochemistry where r-LFTO·C shows higher initial capacity yet poorer capacity retention over a voltage window where O redox can be accessed, while the s-LFTO·C shows lower initial capacity yet improved capacity retention.

25 ENERGY STORAGE↗
DOE OSTI2020

Influence of manganese abundances on iron and arsenic solubility in rice paddy soils

Arsenic (As) mobilization in rice paddy soils under fluctuating redox conditions is influenced by the biogeochemical cycling of redox sensitive elements such as iron (Fe) and manganese (Mn). Arsenic mobility in paddy soils is highly variable, and the influence of Mn abundances and Mn/Fe ratios on As mobility in these soils have received little attention. In this contribution, we developed a complementary set of field and laboratory experiments designed to evaluate the impact of Mn on interconnected Fe and As solubilization in rice paddy soils experiencing wetting-drying cycles through controlled irrigation. Porewater monitoring and synchrotron-based imaging and spectroscopy of thin sections prepared from an Arkansas paddy soil confirmed that As release was primarily governed by reductive dissolution of Fe (oxy)hydroxide phases. Experiments with laboratory soil microcosms amended with the synthetic nanocrystalline Mn oxide, δ-MnO 2 , showed that higher initial Mn/Fe inhibited Fe and As mobilization into porewater relative to unamended soil by up to 95% and 45%, respectively. Geochemical modeling suggests that pH increases driven by microbial MnO 2 reduction, in conjunction with microbial Fe- and sulfate-reduction in carbonate-rich porewater, enhanced the precipitation of siderite (FeCO 3(s) ), mackinawite (FeS (s) ), and potentially a Mn(II) arsenate phase. These secondary mineral phases likely played a greater role in controlling As solubilization than the role of Mn as a redox buffer regulating the redox conditions in the flooded soils. Field and laboratory experiments showed that alternate wetting and drying approaches with a single dry-down can be effective at reducing dissolved As concentrations in porewater through the oxidation of Fe. Differences in soil Mn/Fe ratios had no clear impact on the effectiveness of dry-downs as a strategy to reduce As mobilization.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Using a systems biology approach to describe the role of dissimilatory phosphite oxidation in the global phosphorus cycle

We investigated the role of redox reactions in the global phosphorous (P) cycle. We identified novel microbial processes responsible for oxidation of reduced phosphorous in the form of phosphite producing bioavailable phosphate. We identified central tenets that define microbial dissimilatory phosphite oxidation (DPO) and the breadth of the taxonomy of DPO microorganisms (DPOM). We demonstrated that this metabolism is vertically evolved from 3.8 GYA contemporaneously with anoxygenic phototrophy. We further demonstrate its occurrence on extant Earth as a primary mechanism driving a phosphorous redox cycle. Finally, we showed that this metabolism is environmentally maintained by the newly described autotrophic Phosphitivorax genus which rely on the reductive glycine pathway for carbon fixation. Our results demonstrate that these species are involved in a complex nutrient-dependent symbiotic relationship with their community in which they provide the fixed carbon to support the heterotrophic community and in return receive prerequisite corrinoids to maintain their activities.

54 ENVIRONMENTAL SCIENCES↗