SEARCH · Engineering Papers

Results for “recrystallization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

NASA NTRS1971

Investigation of high temperature fracture of T-111 and ASTAR-811C

The high temperature deformation and fracture behavior of T-111 and ASTAR-811C were studied over the temperature range 982 to 2205 C (1800 to 4000 F). As-cast and wrought-recrystallized material as well as GTA welds in sheet and plate were evaluated using conventional tensile and creep tests. Post test examinations were performed using optical metallography, scanning electron microscopy and transmission electron microscopy. A high temperature region of reduced ductility, in terms of tensile elongation, was identified for both alloys. The reduction in tensile elongation became more severe with increase in grain size, being near catastrophic for the as-cast specimens. Optical and electron metallography indicated that even for failures at very low total strain, considerable deformation of a very localized nature had occurred prior to fracture.

Gold, R. E.↗

NASA NTRS1973

Enhanced diffusion welding

Surfaces of unrecrystallized alloys are sanded and polished. This is followed by a two-step welding process by which the strength of the parent metal is retained at the weld joint. The first step forces the surfaces into intimate contact at a temperature where the metal still has good ductility. The second step causes diffusion, recrystallization, and grain growth across the original weld interface.

Holko, K. H.↗

NASA NTRS1972

Lunar 'dunite', 'pyroxenite' and 'anorthosite.'

Photomicrographic study of 200 thin sections of Apollo 14 rock samples suggests that these monomineralic aggregates are recrystallized single-mineral grains. It is contended, therefore, that the source rocks are not properly characterized by igneous rock names, being more moderately coarse-grained gabbroic rather than ultramafic rocks.

Wilshire, H. G.↗

NASA NTRS1972

Chondrules in Apollo 14 samples and size analyses of Apollo 14 and 15 fines.

Chondrules have been observed in several breccia samples and one fines sample returned by the Apollo 14 mission. The chondrules are formed by at least three different processes that appear to be related to large impacts: (1) crystallization of shock-melted spherules and droplets; (2) rounding of rock clasts and mineral grains by abrasion in the base surge; and (3) diffusion and recrystallization around clasts in hot base surge and fall-back deposits. In the case of the Apollo 14 samples, the large impact almost certainly is the Imbrian event. Grain size analyses of undisturbed fines samples from the Apollo 14 site and from the Apollo 15 Apennine Front are almost identical, indicating that the two localities have similar meteoroid bombardment exposure ages, approximately 3.7 x 10 to the 9th yr. This observation is consistent with the interpretation that both the Fra Mauro formation and the Apennine Front material originated as ejecta from the Imbrian event.

King, E. A., Jr.↗

NASA NTRS1972

Vapor phase crystallization in Apollo 14 breccia.

The vugs contained in many of the highly recrystallized breccias from Apollo 14 are discussed, along with the well-developed crystals of plagioclase, pyroxene, ilmenite, apatite, whitlockite, iron, nickel-iron, and troilite that extend from the vug walls and bridge open spaces. These crystals are interpreted as having formed by deposition from a hot vapor containing oxides, halides, sulfides, alkali metals, iron and possibly other chemical species. The hot vapor was associated with the thermal metamorphism and subsequent cooling of the Fra Mauro formation after it had been deposited as an ejecta blanket by the Imbrian impact.

Mckay, D. S.↗

NASA NTRS1972

Noritic fragments in the Apollo 14 and 12 soils and the origin of Oceanus Procellarum.

Fragments of noritic breccias having a range of recrystallization textures and noritic basalts comprise about 80% of the 1 to 2 mm soil samples from Cone Crater (14142) and the bottom of the trench (14151). In five other samples, noritic fragments range in abundance from 42 to 56%. The remaining particles in each case are glasses, soil breccias, and glass-bonded aggregates; other crystalline rock types such as anorthosites constitute less than 1% of the soil. Noritic materials - i.e., Apollo 12 and 14 norites and ropy (KREEP) glass particles, can be divided into two broad groups on a chemical basis. The particles in one group have relatively high bulk TiO2 contents and high Fe/(Fe + Mg) ratios in their normative pyroxenes; the ropy glasses from Apollo 12 and 14 and a few Apollo 12 noritic rock fragments are in this category. Particles in the other class contain pyroxenes with a lower Fe/(Fe + Mg) and have a range of TiO2 contents; most noritic rock fragments from Apollo 12 and 14 are in this group. The ropy glasses may be from Copernicus or other rayed craters, but almost all the norites derive from the Fra Mauro formation or other noritic occurrences associated with Oceanus Procellarum.

Taylor, G. J.↗

NASA NTRS1972

Electron microscopy of some experimentally shocked counterparts of lunar minerals.

Particulate samples of experimentally shocked olivine, enstatite, and apatite and their unshocked equivalents were thinned by ion bombardment and examined by transmission methods in a conventional (100 kV) electron microscope. Enstatite shock-loaded at a peak pressure of 250 kb was partly transformed to relatively dense inverse defect spinel. Magnesian olivine shocked at a peak pressure of 200 kb shows intense lattice deformation. Magnesian olivine shock-loaded at a peak pressure of 400 kb was recrystallized to very fine polycrystalline aggregates. Apatite shock-loaded at a peak pressure of 250 kb shows planar deformation elements and shock-induced imperfections.

Sclar, C. B.↗

NASA NTRS1972

The Haveroe ureilite - Petrographic notes.

Review of the mineralogy and texture of the Haveroe and of some of the six other known ureilites, and assessment of the implications of their observed characteristics. In common with other ureilites, Haveroe shows mineralogical and textural evidence of preterrestrial shock. The olivines and metal grains have been recrystallized, the fabric includes angular voids, and graphite-rich areas are present that have been partially converted to diamonds with some indication of lonsdaleite. On the basis of such features, a subdivision of ureilites into particular types is proposed.

Marvin, U. B.↗

NASA NTRS1973

Petrology of fine-grained rock fragments and petrologic implications of single crystal from the Luna 20 soil.

Only fine-grained rocks are present in the Luna 20 samples, and coarser-grained rocks are represented by fragments of single crystals. A petrologic study has been made of 47 fine-grained crystalline rocks, microbreccias, and glassy aggregates. In addition, a total of 33 single crystals of pyroxene, plagioclase, olivine, and spinel, in the size range from 125 to 500 microns, have been examined using electron microprobe and single-crystal X-ray diffraction techniques. The most abundant fine-grained crystalline rocks in the samples examined are recrystallized anorthositic norite and anorthositic troctolite. Gabbroic rocks, anorthosite, and KREEP basalt are present but not common. Most of the single crystals of pyroxene and plagioclase could have been derived from coarser-grained noritic, troctolitic, and anorthositic rocks. However, three of the 14 pyroxene crystals, and two of the five olivine crystals have Fe/(Fe + Mg) contents greater than 0.45 and are believed to have been derived from mare basalts or related rocks.

Cameron, K. L.↗

NASA NTRS1974

Properties of dispersion-strengthened chromium - 4-volume-percent-thoria alloys produced by ball milling in hydrogen iodide

The effects of processing variables on the tensile properties and ductile-to-brittle transition temperature (DBTT) of Cr + 4 vol. %ThO2 alloys and of pure Cr produced by ball milling in hydrogen iodide were investigated. Hot rolled Cr + ThO2 was stronger than either hot pressed Cr + ThO2 or pure Cr at temperatures up to 1537 C. Hot pressed Cr + ThO2 had a DBTT of 501 C as compared with minus 8 to 24 C for the hot rolled Cr + ThO2 and with 139 C for pure Cr. It is postulated that the dispersoid in the hot rolled alloys lowers the DBTT by inhibiting recovery and recrystallization of the strained structure.

Arias, A.↗

NASA NTRS1974

Diffusion welding

Dispersion-strengthened nickel alloys are sanded on one side and chemically polished. This is followed by a single-step welding process wherein the polished surfaces are forced into intimate contact at 1,400 F for one hour in a vacuum. Diffusion, recrystallization, and grain growth across the original weld interface are obtained during postheating at 2,150 F for two hours in hydrogen.

Holko, K. H.↗

NASA NTRS1974

Elevated temperature deformation of thoria dispersed nickel-chromium

The deformation behavior of thoria nickel-chromium (TD-NiCr) was examined over the temperature range 593 C (1100 F) to 1260 C (2300 F) in tension and compression and at 1093 C (2000 F) in creep. Major emphasis was placed on: (1) the effects of the material and test related variables (grain size, temperature, stress and strain rate) on the deformation process; and (2) the evaluation of single crystal TD-NiCr material produced by a directional recrystallization process. Elevated temperature yield strength levels and creep activation enthalpies were found to increase with increasing grain size reaching maximum values for the single crystal TD-NiCr. Stress exponent of the steady state creep rate was also significantly higher for the single crystal TD-NiCr as compared to that determined for the polycrystalline materials. The elevated temperature deformation of TD-NiCr was analyzed in terms of two concurrent, parallel processes: diffusion controlled grain boundary sliding, and dislocation motion.

Kane, R. D.↗

NASA NTRS1973

Apollo 17 lunar samples - Chemical and petrographic description

Some of the Apollo 17 rocks have the cataclastic, highly crushed textures common in the Apollo 16 return. Many are crystalline breccias whose petrographic characteristics indicate varying degrees of recrystallization or partial melting. Others are friable and dark gray like the many regolith breccias of previous missions. A few have the coarse-grained igneous textures typically developed during the slow crystallization from basaltic melts. Petrographic and soil characteristics are discussed together with the results of X-ray fluorescence analyses.

Source record↗

NASA NTRS1973

Partial pressures of oxygen, phosphorus and fluorine in some lunar lavas

Lunar sample 14310 is a feldspar-rich basalt which shows no evidence of shock deformation or recrystallization. Pyroxenes include Mg-rich orthopyroxene, pigeonite and augite; pyroxferroite occurs in the interstitial residuum. Plagioclase feldspars are zoned from An(96) to An(67), and variations in feldspar compositions do not necessarily indicate loss of Na during eruption of the lava. Opaque phases include ilmenite, ulvospinel, metallic iron, troilite, and schreibersite. Both whitlockite and apatite are present, and the interstitial residua contain baddeleyite, tranquillityite and barium-rich sanidine. Theoretical calculations provide estimates of partial pressures of oxygen, phosphorus, and fluorine in lunar magmas. In general, partial pressures of oxygen are restricted by the limiting assemblages of iron-wuestite and ilmenite-iron-rutile; phosphorus partial pressures are higher in lunar magmas than in terrestrial lavas. The occurrence of whitlockite indicates significantly lower fugacities of fluorine in lunar magmas than in terrestrial magmas.

Nash, W. P.↗

NASA NTRS1973

Mineralogy and petrology of some Apollo 16 rocks and fines - General petrologic model of moon

Data published in the literature and original results of mineralogical and petrological analyses of Apollo 16 rocks and fines indicate that Apollo 16 and Luna 20 sites are dominated by plagioclase-rich rocks with minor olivine and/or pyroxene. Data suggest that shock, brecciation, and recrystallization have largely eliminated primary textures. In general, all data are consistent with derivation from ejecta blankets produced from plagioclase-rich rocks by impacts. The lunar crust is discussed as a product of an early differentiation of the entire moon, and Mg/Fe data for experimental olivine-liquid and olivine-orthopyroxene equilibria are used as constraints to examine compositional data for rocks, glasses, and fragments in the light of specific models for crystal-liquid differentiation.

Steele, I. M.↗

NASA NTRS1973

Iron crystals in lunar breccias

Many of the vugs in the highly recrystallized breccias from Apollos 14, 15, and 16 contain euhedral iron crystals. Three populations have been recognized based on crystal habit. In the first group the trapezohedron predominates and the cube faces are smaller. The second group is characterized by the cube as the dominant form; trapezohedron and tetrahexahedron faces are smaller and about equally developed. The dominant habit of the third group is the octahedron with smaller but equally developed cube and dodecahedron faces. Iron has been mobilized and redistributed in a vapor phase. The euhedral crystals, the abundant growth steps, and the open network of substrate crystals clearly support the concept of growth from a vapor-phase.

Clanton, U. S.↗

NASA NTRS1973

Experimental petrology and origin of rocks from the Descartes Highlands

Petrographic studies of Apollo 16 samples indicate that rocks 62295 and 68415 are crystallization products of highly aluminous melts. 60025 is a shocked, crushed and partially annealed plagioclase cumulate. 60315 is a recrystallized noritic breccia of disputed origin. 60335 is a feldspathic basalt filled with xenoliths and xenocrysts of anorthosite, breccia, and anorthite. The Fe/(Fe+Mg) of plagioclase appears to be a relative crystallization index. Low pressure melting experiments with controlled Po2 indicate that the igneous samples crystallized at oxygen fugacities well below the Fe/FeO buffer. Crystallization experiments at various pressures suggest that the 62295 and 68415 compositions were produced by partial or complete melting of lunar crustal materials, and not by partial melting of the deep lunar interior.

Walker, D.↗

NASA NTRS1973

Petrology of Apollo 16 lunar highland rocks

Four lunar highland rocks collected by the Apollo 16 astronauts were studied both optically and with the electron microscope. The compositions of cataclastic anorthosite 60025,132, feldspathic basalt 68416,78, spinel troctolite 62295,68, and recrystallized breccia 60315,62 are discussed and graphically presented. Melting experiments were carried out on troctolite 62295,49 and felspathic basalt 68416,21 at temperatures from 1,220 to 1375 C and at pressures from 5 to 12 kb. Hypotheses concerning their petrogenesis are presented.

Hodges, F. N.↗