Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “quantum circuits”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Seamless High-Q Microwave Cavities for Multimode Circuit Quantum Electrodynamics

Multimode cavity quantum electrodynamics ---where a two-level system interacts simultaneously with many cavity modes---provides a versatile framework for quantum information processing and quantum optics. Due to the combination of long coherence times and large interaction strengths, one of the leading experimental platforms for cavity QED involves coupling a superconducting circuit to a 3D microwave cavity. In this work, we realize a 3D multimode circuit QED system with single photon lifetimes of $2$ ms and cooperativities of $0.5-1.5\times10^9$ across 9 modes of a novel seamless cavity. We demonstrate a variety of protocols for universal single-mode quantum control applicable across all cavity modes, using only a single drive line. We achieve this by developing a straightforward flute method for creating monolithic superconducting microwave cavities that reduces loss while simultaneously allowing control of the mode spectrum and mode-qubit interaction. We highlight the flexibility and ease of implementation of this technique by using it to fabricate a variety of 3D cavity geometries, providing a template for engineering multimode quantum systems with exceptionally low dissipation. This work is an important step towards realizing hardware efficient random access quantum memories and processors, and for exploring quantum many-body physics with photons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2019

Mapping Arbitrarily Sparse Two-body Interactions on One-dimensional Quantum Circuits

We consider an assignment problem arising in Fermionic-swap based mapping of the one-body and two-body interaction terms in simulating time evolution of a sparse second-quantized electronic structure Hamiltonian on a quantum computer. Relative efficiency of different swap networks depends on the relative costs of performing a swap layer and computing a Hamiltonian interaction term. Under the assumption that the interaction term cost dominates the computation, we develop an iterative algorithm that uses hypergraph optimal linear arrangement (HOLA) and partial distance-2 coloring to exploit arbitrary sparsity in the Hamiltonian for efficient computation using swap networks. Using a set of 122 problems from computational chemistry, we demonstrate performance improvements up to 100% relative to the state-of-the-art approaches for one-body terms and up to 86% utilization for two-body terms relative to a theoretical peak utilization. To the best of our knowledge, this is the first study to exploit arbitrary sparsity in orbital interactions for efficient computation on one-dimensional qubit connectivity layouts. The proposed algorithms form the basis for extension to map general k-body interactions that arise in other domains onto generalized qubit connectivity layouts.

quantum computing, Combinatorial Optimization, hyp↗
DOE OSTI2023

Algebraic Compression of Free Fermionic Quantum Circuits: Particle Creation, Arbitrary Lattices and Controlled Evolution

In this work [1], we extend our recently introduced algebraic circuit compression algorithms [2], [3] that can compress time evolution circuits of free fermionic Hamiltonians on an n-site 1D chain, equation H(t)=∑i=1n-1 (hi(t)cici+1+pi(t)cici+1)+h.c., 1 equation in three significant ways: (1) we allow for compression of free fermionic Hamiltonians on arbitrary lattices, (2) we incorporate particle creation/annihilation operators into the compression schemes, and (3) we extend the compression scheme to controlled time-evolution operators. We illustrate the effectiveness of our approach by simulating the dynamics of a fermion on a 4× 4 2D square lattice on ibmq_washington, both in the presence and absence of disorder. Our quantum simulations show a remarkably high fidelity which is enabled through the compressed circuits.

Kökcü, Efekan↗
DOE OSTI2022

Euler-Rodrigues Parameters: A Quantum Circuit to Calculate Rigid-Body Rotations

The use of vectorial parameterization to create geometrical representations in computational models has a large number of applications. One particular application is the calculation of the 3D rotational motion of rigid bodies, that could be used for the spatial location estimation from objects. Provided the algebraic nature of this problem, it could benefit from Quantum Computing, in particular several vectors could be superposed to be transformed with a single operation, providing a quantum processing advantage. In this article, we propose an implementation of a Quantum Computing algorithm to compute Euler-Rodrigues Parameters to model rigid body rotations to transform arbitrary functions, rotating multiple vectors in superposition. We developed this algorithm using Qiskit, taking into account the limitations imposed by the current Noisy Intermediate Scale Quantum (NISQ) devices, such as the reduced number of qubits available and the limited coherence time.

Pelaez, Emilio↗
DOE OSTI2018

Atomic layer deposition of titanium nitride for quantum circuits

Superconducting thin films with high intrinsic kinetic inductance are of great importance for photon detectors, achieving strong coupling in hybrid systems, and protected qubits. We report on the performance of titanium nitride resonators, patterned on thin films (9–110 nm) grown by atomic layer deposition, with sheet inductances of up to 234 pH/. For films thicker than 14 nm, quality factors measured in the quantum regime range from 0.2 to 1.0 × 10 6 and are likely limited by dielectric two-level systems. Additionally, we show characteristic impedances up to 28 kΩ, with no significant degradation of the internal quality factor as the impedance increases. In conclusion, these high impedances correspond to an increased single photon coupling strength of 24 times compared to a 50 Ω resonator, transformative for hybrid quantum systems and quantum sensing.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Compact chromium oxide thin film resistors for use in nanoscale quantum circuits

We report on the electrical characterisation of a series of thin amorphous chromium oxide (CrO{sub x}) films, grown by dc sputtering, to evaluate their suitability for use as on-chip resistors in nanoelectronics. By increasing the level of oxygen doping, the room-temperature sheet resistance of the CrO{sub x} films was varied from 28 Ω/◻ to 32.6 kΩ/◻. The variation in resistance with cooling to 4.2 K in liquid helium was investigated; the sheet resistance at 4.2 K varied with composition from 65 Ω/◻ to above 20 GΩ/◻. All of the films measured displayed linear current–voltage characteristics at all measured temperatures. For on-chip devices for quantum phase-slip measurements using niobium–silicon nanowires, interfaces between niobium–silicon and chromium oxide are required. We also characterised the contact resistance for one CrO{sub x} composition at an interface with niobium–silicon. We found that a gold intermediate layer is favourable: the specific contact resistivity of chromium-oxide-to-gold interfaces was 0.14 mΩcm{sup 2}, much lower than the value for direct CrO{sub x} to niobium–silicon contact. We conclude that these chromium oxide films are suitable for use in nanoscale circuits as high-value resistors, with resistivity tunable by oxygen content.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Growth and structure of alpha-Ta films for quantum circuit integration

Tantalum films incorporated into superconducting circuits have exhibited low surface losses, resulting in long-lived qubit states. The remaining loss pathways originate in microscopic defects that manifest as two level systems (TLSs) at low temperatures. These defects limit performance, so careful attention to tantalum film structures is critical for optimal use in quantum devices. In this work, we investigate the growth of tantalum using magnetron sputtering on sapphire, Si, and photoresist substrates. In the case of sapphire, we present procedures for the growth of fully-oriented films with α-Ta [1 1 1]//Al2O3 [0 0 0 1] and α-Ta [1 −1 0]//Al2O3 [1 0 −1 0] orientational relationships and having residual resistivity ratio (RRR) ∼ 60 for 220 nm thick films. On Si, we find a complex grain texturing with Ta [1 1 0] normal to the substrate and RRR ∼ 30. We further demonstrate airbridge fabrication using Nb to nucleate α-Ta on photoresist surfaces. For the films on sapphire, resonators show TLS-limited quality factors of 1.3 ± 0.3 × 106 at 10 mK (for a waveguide gap and conductor width of 3 and 6 μm, respectively). Structural characterization using scanning electron microscopy, x-ray diffraction, low temperature transport, secondary ion mass spectrometry, and transmission electron microscopy reveal the dependence of residual impurities and screw dislocation density on processing conditions. The results provide practical insights into the fabrication of advanced superconducting devices including qubit arrays and guide future works on crystallographically deterministic qubit fabrication.

42 ENGINEERING↗
DOE OSTI2021

Shallow-circuit variational quantum eigensolver based on symmetry-inspired Hilbert space partitioning for quantum chemical calculations

Development of resource-friendly quantum algorithms remains highly desirable for noisy intermediate-scale quantum computing. Based on the variational quantum eigensolver (VQE) with unitary coupled-cluster Ansatz, we demonstrate that partitioning of the Hilbert space made possible by the point-group symmetry of the molecular systems greatly reduces the number of variational operators by confining the variational search within a subspace. In addition, we found that instead of including all subterms for each excitation operator, a single-term representation suffices to reach required accuracy for various molecules tested, resulting in an additional shortening of the quantum circuit by a factor of 4–8. With these strategies, VQE calculations on a noise-free quantum simulator achieve energies within a few meVs of those obtained with the full unitary coupled-cluster Ansatz with single and double excitations for the H 4 -square, H 4 -chain, and H 6 -hexagon molecules, while the number of cnot gates, a measure of the quantum-circuit depth, is reduced by a factor of as large as 35. Furthermore, we introduced an efficient “score” parameter to rank the excitation operators, so that the operators causing larger energy reduction can be applied first. Using the H 4 square and H 4 chain as examples, We demonstrated on noisy quantum simulators that the first few variational operators can bring the energy within the chemical accuracy, while additional operators do not improve the energy since the accumulative noise outweighs the gain from the expansion of the variational Ansatz.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Control of Superconducting Quantum Circuits (17-ERD-006)

The overall goal of this project was to develop and experimentally validate algorithmic, FPGA-based control of a transmon. Though we were not able to conduct the final control experiments, we did develop a significant new capability to design advanced algorithms for specific physics tasks and then efficiently implement them on an FPGA. These algorithms are calculated with sub-microsecond latencies, in particular weak measurement phase estimation in 112 ns and Bayesian estimation of qubit state probabilities every 160 ns. Experimental measurements with a qubit system validate real-time weak measurements on the FPGA and demonstrate the validity of the Bayesian estimation of quantum trajectories.

42 ENGINEERING↗