Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “process synthesis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Sustainable Aviation Fuel: Decarbonizing American Aviation Through Agriculture

This presentation was given in response to an invitation to NREL to contribute to a conference session titled: "From Farm to Sky: Sustainable Aviation Fuel." I overview the basics of Sustainable Aviation Fuel, including reviewing the SAF Grand Challenge, feedstock availability (especially agriculture-relevant feedstocks), the importance of SAF for decarbonizing aviation, life cycle analysis and sustainability, necessary SAF properties, ASTM-approved pathways, SAF synthesis processes in current practice, and broader positive impacts of SAF.

BIOMASS FUELS↗
DOE OSTI2021

Thermal Processing Conditions for the Synthesis of Near Theoretical Density Li 5 La 3 Ta 2 O 12 Ceramics for Ceramic Dual-Mode Detectors

A family of Li-containing garnet compounds, extensively investigated for Li-ion solid electrolyte applications, show great potential to be developed into transparent ceramic dual-mode scintillators. In particular, Li 5 La 3 Ta 2 O 12 (LLTaO) shows promise as an efficient dual-mode scintillator due to its high Li content, high density, non-hygroscopicity, and high effective-Z. Often the synthesis of LLTaO ceramics involves solid state processing techniques starting with oxide and carbonate powders, calcining, sintering for the removal of residual porosity, and post-processing. This study focuses on two objectives: (1) establishing thermal processing boundary conditions for a flexible alkoxide-based sol-gel method for synthesizing fine-grained powders; and (2), consolidating powders via hot-pressing to form high-density ceramics. In this study, near single-phase ceramics were achieved by hot-pressing sol-gel powders with varying amounts of excess Li. Rietveld refinements were used to analyze X-ray diffraction data and provide a quantitative evaluation of the phases present in the hot pressed ceramics. Some of the diffraction data showed large low angle peak asymmetry, suggesting the presence of two cubic Li 5 La 3 Ta 2 O 12 garnet phases with different lattice parameters. Depending on the synthesis and processing conditions, the refinement revealed ~ 90 wt% concentration of a phase with a ≈ 12.8 Å and ~ 10 wt% concentration of a phase with a ≈ 12.9 Å, indicating a remaining excess of Li in the hot pressed ceramics in the large lattice parameter phase. These synthesis experiments allowed for the determination of a baseline for Li loss during hot-pressing. X-ray excited radioluminescence and photoluminescence excitation and emission spectra were obtained from the hot pressed ceramics. In conclusion, the measured emission spectra featured broad tantalate emission and line emissions likely from a rare-earth impurity.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Modeling Analysis of Ball-Milling Process for Battery-Electrode Synthesis

The mechanical alloying process is a promising method for synthesizing electrode materials for batteries owing to its benefits such as the ability to produce nanostructured, high-performing electrode alloys, no adverse effects on the solid electrolyte for solid-state batteries, stable production of thick electrodes, simple processing steps, and low processing costs. It is gaining intensive attention in the battery industry as one of the best methods to replace the conventional wet-slurry-solvent method, and its application is rapidly increasing these days. However, the operation is currently conducted purely based on trial-and-error methods without fully utilizing the features of its functions. Here, this may be attributed to a lack of understanding of the effect of operating parameters on the alloying process and final products. Surprisingly, there is a scarcity of the literature conducting fundamental research to comprehend the underlying physics of the entire mechanical alloying process, resulting in a significant knowledge gap. To address this knowledge gap, extensive research was conducted. The existing literature on mechanical alloying was reviewed to comprehend the current state of understanding and to discuss the direction for future research. Mathematical expressions were developed to create physics-based models capable of capturing the entire mechanical alloying process, including milling kinetics and defect-enhanced phase evolution. These methods were then applied to investigate the impact of operating parameters such as milling frequency, initial mole ratio of the alloyed materials, density of grinding balls, and energy required for the powders to become amorphous (i.e., the amorphization energy threshold). This research aimed not only to comprehend the direct effects of these operating parameters but also to unveil the physics underlying the ball-milling process. The results of our study can serve as crucial information for the battery industry in designing or operating the ball-milling process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Time-resolved probing of laser-induced nanostructuring processes in liquids

Laser synthesis and processing of colloids (LSPC) in liquids has gained widespread applications in producing nanomaterials of different classes of solids. While the technical processes in different cases of ablation, fragmentation or colloidal fusion may look macroscopically different in each application, the underlying fundamental mechanisms are always the same cascade of laser interaction with matter, non-thermal or thermal energy deposition, phase transitions, and the subsequent structure formation processes. Disentangling these mechanisms represents a veritable challenge, as ultrafast and structurally sensitive experimental methods are required. This review presents a discussion of how state-of-the-art experimental protocols using ultrafast lasers and sensitive structural probes, such as electrons or X-rays are able to address this challenge. In particular, it is possible to investigate LSPC on single objects using single probe pulses and avoid accumulation effects in a heterogeneous sample. The presented results capture structure formation with femtosecond and atomic scale resolution. Ultrafast time-resolved probing approaches are key to revealing the transient states and pathways that govern material transformation in LSPC.

X-ray scattering↗
DOE OSTI2021

Asymmetric high energy dual optical parametric amplifier for parametric processes and waveform synthesis

We report on an asymmetric high energy dual optical parametric amplifier (OPA) which is capable of having either the idlers, signals, or depleted pumps, relatively phase locked at commensurate or incommensurate wavelengths. Idlers and signals can be locked on the order of 200 mrad rms or better, corresponding to a 212 as jitter at λ =2 µ m. The high energy arm of the OPA outputs a combined 3.5 mJ of signal and idler, while the low energy arm outputs 1.5 mJ, with the entire system being pumped with a 1 kHz, 18 mJ Ti:Sapphire laser. Both arms are independently tunable from 1080 nm-2600 nm. The combination of relative phase locking, high output power and peak intensity, and large tunability makes our OPA an ideal tool for use in difference frequency generation (DFG) in the strong pump regime, and for high peak field waveform synthesis in the near-infrared. To demonstrate this ability we generate terahertz radiation through two color waveform synthesis in air plasma and show the influence of the relative phase on the generated terahertz intensity. The ability to phase lock multiple incommensurate wavelengths at high energies opens the door to a multitude of possibilities of strong pump DFG and waveform synthesis.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

The TPR domain of PgaA is a multifunctional scaffold that binds PNAG and modulates PgaB-dependent polymer processing

The synthesis of exopolysaccharides as biofilm matrix components by pathogens is a crucial factor for chronic infections and antibiotic resistance. Many periplasmic proteins involved in polymer processing and secretion in Gram-negative synthase dependent exopolysaccharide biosynthetic systems have been individually characterized. The operons responsible for the production of PNAG, alginate, cellulose and the Pel polysaccharide each contain a gene that encodes an outer membrane associated tetratricopeptide repeat (TPR) domain containing protein. While the TPR domain has been shown to bind other periplasmic proteins, the functional consequences of these interactions for the polymer remain poorly understood. Herein, we show that the C-terminal TPR region of PgaA interacts with the de-N-acetylase domain of PgaB, and increases its deacetylase activity. Additionally, we found that when the two proteins form a complex, the glycoside hydrolase activity of PgaB is also increased. To better understand structure-function relationships we determined the crystal structure of a stable TPR module, which has a conserved groove formed by three repeat motifs. Tryptophan quenching, mass spectrometry analysis and molecular dynamics simulation studies suggest that the crystallized TPR module can bind PNAG/dPNAG via its electronegative groove on the concave surface, and potentially guide the polymer through the periplasm towards the porin for export. Our results suggest a scaffolding role for the TPR domain that combines PNAG/dPNAG translocation with the modulation of its chemical structure by PgaB.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Steam-Induced Coarsening of Single-Unit-Cell MFI Zeolite Nanosheets and Its Effect on External Surface Brønsted Acid Catalysis

Commonly used methods to assess crystallinity, micro-/mesoporosity, Brønsted acid site density and distribution (in micro- vs. mesopores), and catalytic activity suggest nearly invariant structure and function for aluminosilicate zeolite MFI two-dimensional nanosheets before and after superheated steam treatment. Yet, pronounced reaction rate decrease for benzyl alcohol alkylation with mesitylene, a reaction that cannot take place in the zeolite micropores, is observed. Transmission electron microscopy images reveal pronounced changes in nanosheet thickness, aspect ratio and roughness indicating that nanosheet coarsening and the associated changes in the external (mesoporous) surface structure are responsible for the changes in the external surface catalytic activity. Finally, superheated steam treatment of hierarchical zeolites can be used to alter nanosheet morphology and regulate external surface catalytic activity while preserving micro- and mesoporosity, and micropore reaction rates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Open‐Air Combustion Synthesis with Rapid Plasma Processing of Large‐Area Transparent Conducting Oxides

A vacuum-free, high-throughput synthesis of indium tin oxide (ITO) via Combustion Oxidation with Rapid Plasma Processing (CORP) utilizes a solution-based exothermic combustion reaction to generate the oxide with tunable control of either amorphous or crystalline phases. A subsequent open-air, forming gas plasma treatment is used to introduce oxygen vacancies and promote crystallization. Here, the evolution of the oxide structure is elucidated by extended X-ray absorption spectroscopy fine structure analysis. Using CORP, fabrication of 300 cm 2 of ITO possessing a champion sheet resistance of 38 Ω sq. −1 , visible transmission of 89%, conductivity stability for over 250 days, roughness < 2nm, and Haacke figure of merit (%T 550nm 10 /R s ) of 0.012 Ω −1 is achieved. Cost modeling of CORP demonstrates up to a 67% reduction in price for TCOs using fully continuous, in-line unit operations compared with vacuum sputtering. The work shows a path toward a low-cost, vacuum-free manufacturing method for TCOs at commercial scales.

42 ENGINEERING↗