Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “porous structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Measurement of Transport Properties of Woody Biomass Feedstock Particles Before and After Pyrolysis by Numerical Analysis of X-Ray Tomographic Reconstructions

Lignocellulosic biomass has a complex, species-specific microstructure that governs heat and mass transport during conversion processes. A quantitative understanding of the evolution of pore size and structure is critical to optimize conversion processes for biofuel and bio-based chemical production. Further, improving our understanding of the microstructure of biochar coproduct will accelerate development of its myriad applications. This work quantitatively compares the microstructural features and the anisotropic permeabilities of two woody feedstocks, red oak and Douglas fir, using X-ray computed tomography (XCT) before and after the feedstocks are subjected to pyrolysis. Quantitative analysis of the three-dimensional (3D) reconstructions allows for direct calculations of void fractions, pore size distributions and tortuosity factors. Next, 3D images are imported into an immersed boundary based finite volume solver to simulate gas flow through the porous structure and to directly calculate the principal permeabilities along longitudinal, radial, and tangential directions. The permeabilities of native biomass are seen to differ by three to four orders of magnitude in the different principal directions, but we find that this anisotropy is substantially reduced in the biochar formed during pyrolysis. The quantitative transport properties reported here enhance the ability of pyrolysis simulations to account for feedstock-specific effects and thereby provide a useful touchstone for the biorefining community.

09 BIOMASS FUELS↗
DOE OSTI2022

Adsorption of methylene blue by bismuth impregnated biochar of different biomass materials: pore structure and surface chemistry characteristics

Abstract In this study, three different types of biochar (biomass materials were beech wood, corncob, and bamboo) were loaded with bismuth to form bismuth impregnated biochars (named respectively as Bi@WBC, Bi@CBC, and Bi@BBC) to investigate their properties (pore structure and surface chemistry characteristics) on methylene blue (MB) removal capacities. Three bismuth impregnated biochars made from different biomass materials were ranked for their adsorption capacity of MB as follows: Bi@WBC > Bi@CBC > Bi@BBC, in which Bi@WBC showed the largest Langmuir adsorption capacity of 178.59 mg g −1 . While the specific surface area (SSA) and pore volume of Bi@WBC were the largest (accounting for 477.74 m 2 g −1 and 0.15 cm 3 g −1 , respectively), according to the FTIR and XPS results, Bi@WBC (72.3%) exhibited a higher proportion of BiO bonds than the Bi@CBC (52.3%) and Bi@BBC (48.4%) did. Conclusively, the rich porous structure and surface functional groups of Bi@WBC affected the adsorption capacity of MB, and the chemical adsorption provided the main contribution. © 2022 Society of Chemical Industry (SCI).

Li, Peiyi↗
DOE OSTI2026

Assessing Structural, Thermal, and Functional Characteristics of Marigold Flower Protein as a Sustainable Food Ingredient

The demand for sustainable and alternative protein sources has been on the rise, driving interest in the valorization of underutilized plants. This study evaluated Calendula officinalis (marigold), a common floral waste, as a sustainable alternative protein source for the food industry. The primary objective of this study was to investigate the physicochemical properties of protein fractions from Calendula officinalis flower to evaluate their potential as a novel protein ingredient. Extraction of the Calendula officinalis flower yielded 92.17% of the crude protein. A sequential extraction of albumin, globulin, glutelin, and prolamin from marigold flower revealed albumin as the dominant fraction (65.47%) and exhibited the highest protein functionality, including water-holding capacity (2.37 g/g), oil-holding capacity (2.49 g/g), and emulsifying capacity (65.22 mL/g). Compared with other protein fractions, glutelin showed a relatively high emulsifying and foaming capacity (EC: 59.13 mL/g; FC: 16.23%). Differential scanning calorimetry revealed high thermal stability for albumin (T p = 105.28 °C) and glutelin (T p = 97.6 °C). Sodium Dodecyl Sulfate–Polyacrylamide Gel Electrophoresis (SDS-PAGE) and Liquid Chromatography–Mass Spectrometry (LC-MS) confirmed the presence of abundant low-molecular-weight polypeptides (<37 kDa), which enhanced emulsification, while scanning electron microscopy revealed porous structures aligned with hydration properties. Antioxidant activity was higher in albumin and glutelin, linked to surface hydrophobicity. LC-MS/MS identified 33 short-chain proteins, including oxidoreductase proteins and lipid-transfer proteins. Findings highlight marigold flower proteins as a sustainable, functional ingredient for a diverse range of food applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Metal-organic frameworks as effective sensors and scavengers for toxic environmental pollutants

Abstract Metal-organic frameworks (MOFs) constructed from a rich library of organic struts and metal ions/clusters represent promising candidates for a wide range of applications. The unique structure, porous nature, easy tunability and processability of these materials make them an outstanding class of materials for tackling serious global problems relating to energy and environment. Among them, environmental pollution is one aspect that has increased at an alarming rate in the past decade or so. With rapid urbanization and industrialization, toxic environmental pollutants are constantly released and accumulated leading to serious contamination in water bodies and thereby having adverse effects on human health. Recent studies have shown that many toxic pollutants, as listed by the World Health Organization and the US Environmental Protection Agency, can be selectively detected, captured, sequestered and removed by MOFs from air and aquatic systems. Most of these sensing/capture processes in MOFs are quantifiable and effective for even a trace amount of the targeted chemical species. The functional sites (ligands and metals) play a critical role in such recognition processes and offer an extensive scope of structural tunability for guest (pollutants, toxic entities) recognition. Whereas on the one hand, the underlying mechanisms governing such sensing and capture are important, it is also crucial to identify MOFs that are best suited for commercial applications for the future. In this review article, we provide an overview of the most recent progress in the sensing, capture and removal of various common toxic pollutants, including neutral and ionic, inorganic and organic species, with brief discussions on the mechanism and efficacy of selected MOFs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

When SLIPS meets TIPS: An endogenous lubricant-infused surface by taking the diluent as the lubricant

Slippery lubricant-infused porous surfaces (SLIPSs) hold great promise in fields requiring adhesion resistance such as self-cleaning, anti-fouling, anti-icing, and anti-scaling. However, their road to practical application is still blocked by the complicated fabrication process and the restricted coating area. To address these challenges, we propose a new concept of endogenous SLIPS in which the porous structure grows from the solution coating of polypropylene/caprylyl methicone undergoing a thermally induced phase separation (TIPS) process. Caprylyl methicone serves as the diluent during TIPS as well as the lubricant in the SLIPS so that the coating can be fabricated in one step and unrestrictedly. Furthermore, the dissolution and phase separation mechanisms have been revealed by molecular dynamic simulation and in situ microscopic observation. Such SLIPSs exhibits impressive sliding property even for sticky and viscous liquids and exhibit extremely low ice adhesion in anti-icing tests.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Structure prediction of porous organic crystals

In this work, we explore the possibility of applying automated crystal structure prediction to reproduce the experimentally identified metastable porous polymorphs. Using our recently developed High-Throughput Organic Crystal Structure Prediction ( HTOCSP ) framework, we conducted a systematic study on five representative organic crystalline systems including hydrogen-bonded frameworks (HOFs), featured by the presence of significant porosity, in conjunction with different choices of energy models from classical, machine learning force fields, tight binding to density functional theory. Our results suggest that the current structure generation framework, with careful selection of symmetry conditions, is likely to generate rather complex and abundant metastable crystal candidates for porous crystals. In conjunction with the recent advance in universal machine learning force fields, it becomes possible to identify experimental structures as the energetically favorable candidates from a simple energy versus density analysis, thus paving the way for computational design of complex porous materials with the target systems prior to the experimental synthesis and characterization.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Microstructural pattern formation during liquid metal dealloying: Phase-field simulations and theoretical analyses

In recent years, liquid metal dealloying has emerged as a promising material processing method to generate micro- and nanoscale bicontinuous or porous structures. Most previous studies focused on the experimental characterization of the dealloying process and on the properties of the dealloyed materials, leaving the theoretical study incomplete to fully understand the fundamental mechanisms of the liquid metal dealloying process. In this paper, we use theoretical models and phase-field simulations to clarify the kinetics and pattern formation during liquid metal dealloying. Our investigation starts from a theoretical analysis of the 1D dissolution of a binary precursor alloy, which reveals that the 1D dissolution process involves two regimes. In the first regime, due to the low solubility of one of the elements in the melt, it accumulates at the solid-liquid interface, which reduces the dissolution kinetics. In the second regime, the interface kinetics reaches a stationary regime where both elements of the precursor alloy dissolve into the melt. Previous works revealed that in the early dealloying stage, the dealloying front is destabilized by an interfacial spinodal decomposition, which triggers the formation of interconnected ligaments. Here we extend this line of work by proposing a linear stability analysis able to predict the initial length scale of the ligaments formed in the initial stage of the dealloying. Combining this analysis with the 1D dissolution model proposed here enables us to better understand the initial conditions (composition of the precursor alloy and the melt) leading to a planar dissolution without interface destabilization. Finally, we report a strong influence of solid-state diffusion on dealloying. Although the solid-state diffusivity is four to five orders of magnitude smaller than in the liquid phase, it is found to affect both dissolution kinetics and ligament morphologies.

36 MATERIALS SCIENCE↗
DOE OSTI2020

3D Hybrid Nanofiber Aerogels Combining with Nanoparticles Made of a Biocleavable and Targeting Polycation and MiR‐26a for Bone Repair

Abstract The healing of large bone defects represents a clinical challenge, often requiring some form of grafting. 3D nanofiber aerogels could be a promising bone graft due to their biomimetic morphology and controlled porous structures and composition. miR‐26a has been reported to induce the differentiation of bone marrow‐derived mesenchymal stem cells (BMSCs) and facilitate bone formation. Introducing miR‐26a with a suitable polymeric vector targeting BMSCs could improve and enhance the functions of 3D nanofiber aerogels for bone regeneration. Herein, the comb‐shaped polycation (HA–SS–PGEA) is first developed, carrying a targeting component, biocleavable groups, and short ethanolamine (EA)‐decorated poly(glycidyl methacrylate) (PGMA) (abbreviated as PGEA) arms as miR‐26a delivery vector. Thereafter, the cytotoxicity and transfection efficiency of this polycation and cellular response to miR‐26a‐incorporated nanoparticles (NPs) are assessed in vitro. HA–SS–PGEA exhibits a stronger ability to transport miR‐26a and exert its functions than the gold standard polyethyleneimine (PEI) and low‐molecular‐weight linear PGEA. The efficacy of HA–SS–PGEA/miR‐26a NPs loaded 3D hybrid nanofiber aerogels showing a positive effect on the cranial bone defect healing is finally examined. Together, the combination of 3D nanofiber aerogels and functional NPs consisting of a biodegradable and targeting polycation and therapeutic miRNA could be a promising approach for bone regeneration.

Li, Ruiquan↗
DOE OSTI2023

Additive Manufacturing of Poly(phenylene Sulfide) Aerogels via Simultaneous Material Extrusion and Thermally Induced Phase Separation

Abstract Additive manufacturing (AM) of aerogels increases the achievable geometric complexity, and affords fabrication of hierarchically porous structures. In this work, a custom heated material extrusion (MEX) device prints aerogels of poly(phenylene sulfide) (PPS), an engineering thermoplastic, via in situ thermally induced phase separation (TIPS). First, pre‐prepared solid gel inks are dissolved at high temperatures in the heated extruder barrel to form a homogeneous polymer solution. Solutions are then extruded onto a room‐temperature substrate, where printed roads maintain their bead shape and rapidly solidify via TIPS, thus enabling layer‐wise MEX AM. Printed gels are converted to aerogels via postprocessing solvent exchange and freeze‐drying. This work explores the effect of ink composition on printed aerogel morphology and thermomechanical properties. Scanning electron microscopy micrographs reveal complex hierarchical microstructures that are compositionally dependent. Printed aerogels demonstrate tailorable porosities (50.0–74.8%) and densities (0.345–0.684 g cm −3 ), which align well with cast aerogel analogs. Differential scanning calorimetry thermograms indicate printed aerogels are highly crystalline (≈43%), suggesting that printing does not inhibit the solidification process occurring during TIPS (polymer crystallization). Uniaxial compression testing reveals that compositionally dependent microstructure governs aerogel mechanical behavior, with compressive moduli ranging from 33.0 to 106.5 MPa.

Chemistry↗
DOE OSTI2024

Transport–Friendly Microstructure in SSC–MEA: Unveiling the SSC Ionomer–Based Membrane Electrode Assemblies for Enhanced Fuel Cell Performance

The significant role of the cathodic binder in modulating mass transport within the catalyst layer (CL) of fuel cells is essential for optimizing cell performance. This investigation focuses on enhancing the membrane electrode assembly (MEA) through the utilization of a short-side-chain perfluoro-sulfonic acid (SSC-PFSA) ionomer as the cathode binder, referred to as SSC-MEA. This study meticulously visualizes the distinctive interpenetrating networks of ionomers and catalysts, and explicitly clarifies the triple-phase interface, unveiling the transport-friendly microstructure and transport mechanisms inherent in SSC-MEA. The SSC-MEA exhibits advantageous microstructural features, including a better-connected ionomer network and well-organized hierarchical porous structure, culminating in superior mass transfer properties. Relative to the MEA bonded by long-side-chain perfluoro-sulfonic acid (LSC-PFSA) ionomer, noted as LSC-MEA, SSC-MEA exhibits a notable peak power density (1.23 W cm –2 ), efficient O 2 transport, and remarkable proton conductivity (65% improvement) at 65 °C and 70% relativity humidity (RH). These findings establish crucial insights into the intricate morphology-transport-performance relationship in the CL, thereby providing strategic guidance for developing highly efficient MEA.

25 ENERGY STORAGE↗
DOE OSTI2020

Enhanced Rate Capability of Ion‐Accessible Ti 3 C 2 T x ‐NbN Hybrid Electrodes

Abstract Although 2D Ti 3 C 2 T x is a good candidate for supercapacitors, the restacking of nanosheets hinders the ion transport significantly at high scan rates, especially under practical mass loading (>10 mg cm −2 ) and thickness (tens of microns). Here, Ti 3 C 2 T x ‐NbN hybrid film is designed by self‐assembling Ti 3 C 2 T x with 2D arrays of NbN nanocrystals. Working as an interlayer spacer of Ti 3 C 2 T x , NbN facilitates the ion penetration through its 2D porous structure; even at extremely high scan rates. The hybrid film shows a thickness‐independent rate performance (almost the same rate capabilities from 2 to 20 000 mV s −1 ) for 3 and 50 µm thick electrodes. Even a 109 µm thick Ti 3 C 2 T x ‐NbN electrode shows a better rate performance than 25 µm thick pure Ti 3 C 2 T x electrodes. This method may pave a way to controlling ion transport in electrodes composed of 2D conductive materials, which have potential applications in high‐rate energy storage and beyond.

Wang, Hao↗
DOE OSTI2021

Unlocking Failure Mechanisms and Improvement of Practical Li–S Pouch Cells through In Operando Pressure Study

For Lithium-sulfur (Li-S) battery commercialization, the study at a pouch cell level is essential, as some problems ignored or deemed minimal at the smaller level could have a greater effect on the performance of the larger pouch cell. Herein, the failure mechanisms of Li-S pouch cells are deeply investigated via in operando pressure analysis. It is found that highly porous structures of cathodes/separators and slow electrolyte diffusion through cathodes/separators can both lead to poor initial wetting. Additionally, Li-metal anode dominates the thickness variation of the whole pouch cell, which is verified by in situ measured pressure variation. Consequently, a real-time approach that combined normalized pressure with dP/dV analysis is proposed and validated to diagnose the morphology evolution of Li-metal anode. Moreover, applied pressure and porosity/tortuosity ratio of the cathode are both identified as independent factors that influence anode performance. In addition to stabilizing anodes, high pressure is proven to improve the cathode connectivity and avoid cathode cracking over cycling, which improves the possibility of developing cathodes with high sulfur mass loading. Here, this work provides insights into Li-S pouch cell design (e.g., cathode and separator) and highlights pathways to improve cell capacity and cycling performance with applied and monitored pressure.

25 ENERGY STORAGE↗
DOE OSTI2023

Phosphate‐functionalized Zirconium Metal–Organic Frameworks for Enhancing Lithium–Sulfur Battery Cycling

Abstract Lithium–sulfur batteries are promising candidates for next‐generation energy storage devices due to their outstanding theoretical energy density. However, they suffer from low sulfur utilization and poor cyclability, greatly limiting their practical implementation. Herein, we adopted a phosphate‐functionalized zirconium metal–organic framework (Zr‐MOF) as a sulfur host. With their porous structure, remarkable electrochemical stability, and synthetic versatility, Zr‐MOFs present great potential in preventing soluble polysulfides from leaching. Phosphate groups were introduced to the framework post‐synthetically since they have shown a strong affinity towards lithium polysulfides and an ability to facilitate Li ion transport. The successful incorporation of phosphate in MOF‐808 was demonstrated by a series of techniques including infrared spectroscopy, solid‐state nuclear magnetic resonance spectroscopy, and X‐ray pair distribution function analysis. When employed in batteries, phosphate‐functionalized Zr‐MOF (MOF‐808‐PO4) exhibits significantly enhanced sulfur utilization and ion diffusion compared to the parent framework, leading to higher capacity and rate capability. The improved capacity retention and inhibited self‐discharge rate also demonstrate effective polysulfide encapsulation utilizing MOF‐808‐PO4. Furthermore, we explored their potential towards high‐density batteries by examining the cycling performance at various sulfur loadings. Our approach to correlate structure with function using hybrid inorganic–organic materials offers new chemical design strategies for advancing battery materials.

Liu, Bingqian↗
DOE OSTI2023

Conducting Polymers Meet Lithium–Sulfur Batteries: Progress, Challenges, and Perspectives

Lithium–sulfur (Li–S) batteries have attracted increased interest because of the high theoretical energy density, low cost, and environmental friendliness. Conducting polymers (CPs), as one of the most promising materials used in Li–S batteries, can not only facilitate electron transfer and buffer the large volumetric change of sulfur benefiting from their porous structure and excellent flexibility, but also enable stronger physical/chemical adsorption capacity toward polysulfides (LiPSs) when doped with abundant heteroatoms to promote the sulfur redox kinetics and achieve the high sulfur loading. This review firstly introduces the properties of various CPs including structural CPs (polypyrrole (PPy), polyaniline (PANi), polyethylene dioxothiophene [PEDOT]) and compound CPs (polyethylene oxide (PEO), polyvinyl alcohol (PVA) and poly(acrylic acid) [PAA]), and their application potential in Li–S batteries. Furthermore, the research progress of various CPs in different components (cathode, separator, and interlayer) of Li–S batteries is systematically summarized. Finally, the application perspective of the CPs in Li–S batteries as a potential guidance is comprehensively discussed.

Chen, Xin↗
DOE OSTI2022

In Situ Growth of Crystalline and Polymer-Incorporated Amorphous ZIFs in Polybenzimidazole Achieving Hierarchical Nanostructures for Carbon Capture

We report mixed matrix materials (MMMs) hold great potential for membrane gas separations by merging nanofillers with unique nanostructures and polymers with excellent processability. In situ growth of the nanofillers is adapted to mitigate interfacial incompatibility to avoid the selectivity loss. Surprisingly, functional polymers have not been exploited to co-grow the nanofillers for membrane applications. Herein, in situ synergistic growth of crystalline zeolite imidazole framework-8 (ZIF-8) in polybenzimidazole (PBI), creating highly porous structures with high gas permeability, is demonstrated. More importantly, PBI contains benzimidazole groups (similar to the precursor for ZIF-8, i.e., 2-methylimidazole) and induces the formation of amorphous ZIFs, enhancing interfacial compatibility and creating highly size-discriminating bottlenecks. For instance, the formation of 15 mass% ZIF-8 in PBI improves H- 2 permeability and H- 2 /CO 2 selectivity by approximate to 100% at 35 degrees C, breaking the permeability/selectivity tradeoff. This work unveils a new platform of MMMs comprising functional polymer-incorporated amorphous ZIFs with hierarchical nanostructures for various applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Build Orientation Dependent Microstructure in Polymer Laser Sintering: Relationship to Part Performance and Evolution with Aging

Laser sintering (LS) is widely used to produce functional polymeric parts; however, the resulting parts are often limited by their porous structure, and performance of the part may be strongly anisotropic. Relating the structural features of parts to build process conditions or powder feedstock has been explored previously. In contrast, little is known regarding how the unique internal structures of LS parts evolve and relate to their performance later in their life cycle, for example, after use in a real-world operating environment. In this study, a tightly controlled LS build process and measurement campaign by standard X-ray computed tomography (XCT), supported by high-resolution synchrotron XCT, was used to benchmark the internal microstructure (e.g. porosity) as a function of four different build orientations in printed polyamide-12 (PA-12) parts. The initial performance of the parts after printing was characterized by tensile testing and dynamic mechanical analysis (DMA). Arrays of PA-12 parts in different build orientations were exposed to steam (under pressure) and air across multiple temperature and time points for the purposes of accelerated aging through oxidative and hydrolytic breakdown. Exposing parts to steam dramatically altered the internal microstructure and functional properties such as the glass transition temperature, tensile properties, and damping behavior. Notably, post-aging XCT revealed large microstructural changes after only 40 h of steam treatment relative to the as-printed specimens. Furthermore, pore reorganization and changes in crystallinity occurred regardless of whether the steam temperature was aggressive enough to induce a significant loss in mechanical properties. The build orientation dependence on the aging rate was minimal with the relative trend in performance persisting across most metrics among the different orientations even after aging.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A deep learning upscaling framework: Reactive transport and mineral precipitation in fracture-matrix systems

Pore-scale modeling has limited applicability at large scales due to its high computational cost. One common approach to upscale pore-scale models is the use of effective medium theories, which homogenize small-scale features in a porous structure and characterize the medium by macroscale properties (e.g., permeability) and equations (e.g., Darcy’s law). However, there are classes of physical processes for which effective medium approximations may become inaccurate, e.g., mineral precipitation and clogging during reactive transport. We have developed a deep learning upscaling framework, in which pore-scale modeling is directly employed in macroscale systems, without relying on effective medium approximations. The upscaling framework is first developed for general multiscale systems and then applied to modeling reactive transport with mineral precipitation in the altered layer in fracture-matrix structures. Solute transport from the fractures to the matrix is modeled as a wall boundary condition for the fractures, which, in turn, is predicted by recurrent neural networks using the concentration histories at the fracture-matrix boundary. Specifically, we consider a meter-scale fracture network embedded in sandstones, where the smallest feature is at the micron scale. Here the proposed framework allows us to span five orders of magnitude in length scales by capturing mineral precipitation in the altered layer of the rock matrix at the pore scale across the entire meter-scale fracture network.

42 ENGINEERING↗
DOE OSTI2020

Modified Coal Char Materials with High Rate Performance for Battery Applications

Global energy consumption has been rising since the early 2000s, and most of the energy supply still comes from burning fossil fuels. Considering the detrimental environmental impacts of fossil fuels, such as CO 2 emissions, it is crucial to develop clean energy technologies, such as storage devices that can advance long-term reversible and sustainable energy resources. In this work, we demonstrate the direct use of coal char in anodes tailored for both lithium-ion and sodium-ion batteries. The findings show that acid treatment followed by high-temperature argon annealing results in coal char particles with the desired porous structure, surface properties, and turbostratic nanodomains that deliver high reversible capacity and maintain good electrochemical performance at high rates up to 10C. Long-term cycling stability for 500 cycles can be achieved in cells comprising NMC cathodes at 1C with 73.2% capacity retention. In conclusion, this study sheds light on potential energy storage use cases for coal char outside its traditional utilization.

25 ENERGY STORAGE↗