SEARCH · Engineering Papers

Results for “polymer chains”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Investigation of $\gamma$-irradiated polyvinylidene fluoride and its acute toxicity

Polyvinylidene fluoride (PVDF) is an industrial polymer with many applications. The EPR spectrum of polyvinylidene fluoride (PVDF) irradiated by γ-rays at low temperature (-196°C) provides evidence for the presence of radicals formed by loss of a fluorine atom from PVDF, and polyenyl radicals. Polyenyl radicals dominate in the polymer irradiated at room temperature. Peroxide radicals formed as a result of oxidation of primary free radicals by atmospheric oxygen are observed in the EPR spectrum of a polymer irradiated in air, or when air is introduced to a polymer irradiated in a vacuum. Carbonization and oxidation of γ-irradiated PVDF were observed in the XPS spectrum. A model for polymer degradation based on correlated G3(MP2) molecular orbital theory electronic structure calculations is described in this report. The presence of HF in the products and a low yield of products with the composition CxFyHz indicate the absence of noticeable thermal destruction of the main polymer chain upon heating to 220°C of both the initial and γ-irradiated PVDF. Although any HF released during the PVDF dehydrofluorination would be toxic, a study of the acute toxicity of γ-irradiated PVDF showed that the polymer does not exhibit toxicity after a single intragastric route of administration to mice.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Single molecule characterization of anomalous transport in a thin, anisotropic film

Here, the diffusion of small, charged molecules incorporated in an anisotropic polyelectrolyte multilayers (PEMs) was tracked in three dimensions by combining single-molecule fluorescence localization (to characterize lateral diffusion) with Förster resonance energy transfer (FRET) between diffusing molecules and the supporting surface (to measure diffusion in the surface-normal direction). Analysis of the surface-normal diffusion required model-based statistical analysis to account for the inherently noisy FRET signal. Combining these distinct single-molecule methods, which are inherently sensitive to different length scales, permitted simultaneous characterization of severely anisotropic diffusion, which was more than three orders of magnitude slower in the surface-normal direction. We hypothesize that the anomalously slow surface-normal diffusion was related to the periodic distribution of charge in the PEM, which created electrostatic barriers. The motion was strongly subdiffusive, with anomalous temporal scaling exponents in lateral and normal directions, suggesting a connection to the transient, random fractal conformation of polymer chains in the film’s matrix.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Understanding Solution State Conformation and Aggregate Structure of Conjugated Polymers via Small Angle X-ray Scattering

Donor-acceptor (D-A) conjugated polymers are high-performance organic electronic materials that exhibit complex aggregation behavior. Understanding the solution state conformation and aggregation of conjugated polymers is crucial for controlling morphology during thin-film deposition and the subsequent electronic performance. However, a precise multiscale structure of solution state aggregates is lacking. Here, we present an in-depth small-angle X-ray scattering (SAXS) analysis of the solution state structure of an isoindigo-bithiophene-based D-A polymer (PII-2T) in chlorobenzene and decane as our primary system. Modeling the system as a combination of hierarchical fibrillar aggregates mixed with dispersed polymers, we extract information about conformation and multiscale aggregation and also clarify the physical origin of features often observed but unaddressed or misinterpreted in small-angle scattering patterns of conjugated polymers. The persistence length of the D-A polymer extracted from SAXS agrees well with a theoretical model based on the dihedral potentials. Additionally, we show that the broad high q structure factor peak seen in scattering profiles can be attributed to lamellar stacking occurring within the fibril aggregates and that the low q aggregate scattering is strongly influenced by the polymer molecular weight. Overall, the SAXS profiles of D-A polymers in general exhibit a sensitive dependence on the co-existence of fibrillar aggregate and dispersed polymer chain populations. We corroborate our findings from SAXS with electron microscopy of freeze-dried samples for direct imaging of fibrillar aggregates. Finally, we demonstrate the generality of our approach by fitting the scattering profiles of a variety of D-A polymers based on thieno-isoindigo (PTII-2T), diketopyrrolopyrrole (DPP2T-TT, DPP-BTZ, PDPP2FT-C- 16 ), naphthalenediimide (P(NDI2OD-T2)), and a conjugated block copolymer P3HT-b-DPPT-T. The results presented here establish a picture of the D-A polymer solution state structure and provide a general method of interpreting and analyzing their scattering profiles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Dispersity-Driven Stabilization of Coexisting Morphologies in Asymmetric Diblock Copolymer Thin Films

Despite decades of research, characterization of the effects of polymer chain dispersity on the structural properties of block copolymer thin films remains challenging. Here we present an integrated experimental and modeling approach to characterize the morphology of thin films containing asymmetric diblock copolymers. Specifically, we used synergistic neutron reflectivity (NR) and self-consistent field theory (SCFT)-based modeling to realize unexpected morphology of thin films containing asymmetric copolymers. Using NR, a highly stable and reproducible mixed phase of coexisting cylinders and lamellar domains was discovered in asymmetric poly(deuterated-styrene-b-n butyl methacrylate) (dPS-PBMA) copolymer thin films containing 34% volume fraction of dPS. SCFT reveals how to obtain such a thermodynamically stable morphology in the presence of disperse majority block and asymmetric interactions of polymer species with surfaces. Stabilization of the coexisting domains is a consequence of the depth segregation based on chain-length distribution. The asymmetric chains microphase-separate into cylindrical domains close to the substrate and near-symmetric chains form lamellar domains at the air interface. In the absence of dispersity, the coexistence of cylindrical and lamellar domains is thermodynamically unstable because of the absence of depth segregation. Overall, such an effect of dispersity on diblock copolymer thin-film morphology reveals a unique and powerful strategy to create coexisting nanoscale domains and tailor properties of thin films.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Controllable growth of interpenetrating or random copolymer networks

Interpenetrating and random copolymer networks are vital in a number of industrial applications, including the fabrication of automotive parts, damping materials, and tissue engineering scaffolds. We develop a theoretical model for a process that enables the controlled growth of interpenetrating network (IPNs), or a random copolymer network (RCN) of specified size and mechanical properties. In this process, a primary gel “seed” is immersed into a solution containing the secondary monomer and crosslinkers. After the latter species are absorbed into the primary network, the absorbed monomers are polymerized to form the secondary polymer chains, which then can undergo further crosslinking to form an IPN, or undergo inter-chain exchange with the existing network to form a RCN. The swelling and elastic properties of the IPN and RCN networks can be tailored by modifying the monomer and crosslinker concentrations in the surrounding solution, or by tuning the enthalpic interactions between the primary polymer, secondary monomer and solvent through a proper choice of chemistry. This process can be used repeatedly to fabricate gels with a range of mechanical properties from stiff, rigid materials to soft, flexible networks, allowing the method to meet the materials requirements of a variety of applications.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Modeling swelling behavior of hydrogels in aqueous organic solvents

Hydrogel, a three-dimensional elastic structure of cross-linked polymer chains, swells or deswells when immersed in aqueous organic solutions. The swelling of hydrogels depends on temperature, solvent composition, and hydrogel structure as the thermodynamic driving forces for hydrogel swelling are due to solvent – hydrogel interactions and expansion of elastic network. Here in this work, polymer Nonrandom Two-Liquid activity coefficient model is used to account for the solvent – hydrogel interactions and a semi-empirical expression for rubber elasticity is used to describe the expansion of elastic network. The model successfully correlates data for both swelling and equilibrium phase compositions for n-isopropyl acrylamide hydrogels in water – ethanol, water – acetone, water – n-butanol, and water – methyl isobutyl ketone mixed solvents.

42 ENGINEERING↗

DOE OSTI2025

B‐Staging and Crosslinking of Polycarbosilane at Room Temperature: Cure Mechanism and Properties

The viscosity of polycarbosilane (PCS) polymers is not advantageous for free forming. Various fillers and heat are used to obtain a formable paste. Due to the low yield stress, structures and preforms tend to slump or resin will flow out, especially during the curing of the polymer. B-staging of PCS allows for a more stable structure from room temperature until the full cure of the allyl groups occurs with heat. Additionally, hydrosilation is an effective means of crosslinking at room temperature and controlling viscosity. A network structure was formed in SMP-10 using silane and a vinyl-based crosslinker to bridge each polymer chain. Pt addition catalysts were added to enhance the increase in viscosity to make a lightly crosslinked gel to aid in thickening and forming and to improve the ceramic yield at 1000°C. In conclusion, this enables several options for controlling rheology and improving the properties of preceramic polymers to avoid slumping during curing.

inorganic polymers↗

DOE OSTI2026

Investigating PVC polymer–plasticizer interactions with atomistic MD simulations and potential of mean force calculations

For this work, atomistic molecular dynamics (MD) simulations coupled with potential of mean force (PMF) calculations were employed to investigate the interactions between PVC polymer chains containing 6–20 repeating units and various plasticizers, with the goal of identifying potential replacements for the toxic plasticizer di(2-ethylhexyl)phthalate (DEHP) used in blood bags. The selected plasticizers belong to various chemical families, such as orthophthalates, citrates, adipates, and the terephthalate DEHT. Both the polymer and the plasticizers lack ionizable groups, and their interactions are primarily governed by van der Waals and electrostatic forces. A model correlating PMF profiles with interaction forces was developed and validated across polyvinyl chloride (PVC) polymers of different lengths and all investigated plasticizers. This model provides insight into how structural variations in plasticizers influence their respective PMF values. The study ranks the investigated plasticizers based on binding affinity, identifying TOTM (tris(2-ethylhexyl) trimellitate, TEHTM), BTHC (butyryl trihexyl citrate, Citroflex B-6), ATHC (acetyl trihexyl citrate, Citroflex A-6, CA-6), and DEHT (bis(2-ethylhexyl)terephthalate, DOTP/DEHTP) as promising alternatives for further investigation. This comprehensive study encompasses PVC polymers of four different lengths and 14 plasticizers, with all data averaged over 30 independent simulations. The approach provides a deeper understanding of molecular interactions, enabling the tailoring of polymer–plasticizer systems for diverse applications, including extractables and leachables, with relevance spanning materials science to biomedical engineering, and also serves as a basis for developing coarse-grained simulation protocols. Overall, this study provides valuable insights for designing safer and more efficient plasticizer substitutes and is well supported by other studies.

Shet, Sai Athmeeya G. [Sri Sathya Sai Institute of↗

DOE OSTI2026

Effect of Specimen Thickness on Fracture Toughness and Plane Stress to Plane Strain Transition in Medium-Density Polyethylene

This study investigates the effect of specimen thickness on fracture toughness and the transition from plane stress to plane strain conditions in Medium-Density Polyethylene (MDPE) using Single Edge Notched Bend (SENB) specimens. Three thickness groups (7.5 mm, 9.0 mm, and 12.1 mm) were tested following ASTM D5045 protocol. Conditional stress intensity factors (KQ) increased from 2.2 MPavm to 2.8 MPavm with increasing thickness, demonstrating significant size dependency. Confocal microscopy revealed a 34% reduction in maximum crack tip opening displacement (CTOD) from 0.478 mm to 0.314 mm as thickness increased, with plastic zone lateral extent decreasing by 32%. This quantitative evidence validates Irwin's theoretical prediction of plastic zone size transition from plane stress r_y˜ (1/2p) (K_I/s_y )^2 to plane strain conditions r_y˜ (1/6p) (K_I/s_y )^2.Scanning electron microscopy confirmed progressive suppression of shear lips and evolution from ductile tearing with extensive polymer chain drawing in thin specimens to localized crazing in thick specimens. Despite all specimens satisfying the ASTM D5045 criterion (B = 2.5(KQ/s_y )^2 ) ,residual shear lips persisted even in the thickest specimens, demonstrating that nominal size requirements alone are insufficient for achieving complete plane strain conditions in highly ductile polymers. The findings emphasize the necessity of integrated analytical and morphological assessment for valid fracture toughness characterization, with critical implications for life assessment and integrity prediction in thick-section polymer components such as natural gas distribution pipelines.

Medium-Density Polyethylene↗

DOE OSTI2022

Effect of melt shearing on D -mannitol crystal twisting in the presence of small molecule and macromolecular additives

Here, many molecular crystals grow as twisted lamellae from the melt when the driving force is high, but the mechanisms governing the spontaneous formation of helicoidal crystallites are varied and those operative in particular cases are difficult to identify. Polyvinylpyrrolidone (PVP) induces the crystallization of D-mannitol as banded spherulites comprised of twisted fibrils emanating radially from spherulite nucleation centers. The molecular weight of the PVP phase affects the twisting pitch, P, (rotation of the crystallite by 180°), in D-mannitol thin films crystallized from the melt. At a relatively high crystallization temperature (T c =130°C), P was sensitive to the PVP molecular weight, ranging from 390±20 μm for D-mannitol films incorporating 15 wt% 10 kDa PVP to 20±3 μm for the same weight of 1300 kDa PVP. Magnitudes of complex viscosities, |η*|, of D-mannitol/PVP melts measured via small-amplitude oscillatory shearing were strongly dependent on the PVP molecular weight, but were not correlated to P(T). Instead, P was sensitive to the dynamic PVP chain conformation during D-mannitol crystallization. Under steady torsional shear, P decreased from~30 μm to~8μm with increasing shear rates from 0.01 to 100 s -1 for D-mannitol films crystallized at 130°C in the presence of 15 wt% 10 or 1300 kDa PVP. Shear forces decrease the entanglement density of polymer chains while orienting the chains along the stream lines of the viscometric flow, indicating that the conformations of macromolecular additives can affect the pitch of banded spherulites. By contrast, P in D-mannitol twisted by D-sorbitol was independent of shear rate.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Carbodiimide‐Driven Toughening of Interpenetrated Polymer Networks

Abstract Recent work has demonstrated that temporary crosslinks in polymer networks generated by chemical “fuels” afford materials with large, transient changes in their mechanical properties. This can be accomplished in carboxylic‐acid‐functionalized polymer hydrogels using carbodiimides, which generate anhydride crosslinks with lifetimes on the order of minutes to hours. Here, the impact of the polymer network architecture on the mechanical properties of transiently crosslinked materials was explored. Single networks (SNs) were compared to interpenetrated networks (IPNs). Notably, semi‐IPN precursors that give IPNs on treatment with carbodiimide give much higher fracture energies (i.e., resistance to fracture) and superior resistance to compressive strain compared to other network architectures. A precursor semi‐IPN material featuring acrylic acid in only the free polymer chains yields, on treatment with carbodiimide, an IPN with a fracture energy of 2400 J/m 2 , a fourfold increase compared to an analogous semi‐IPN precursor that yields a SN. This resistance to fracture enables the formation of macroscopic complex cut patterns, even at high strain, underscoring the pivotal role of polymer architecture in mechanical performance.

Rajawasam, Chamoni W. H.↗

DOE OSTI2024

Carbodiimide‐Driven Toughening of Interpenetrated Polymer Networks

Rajawasam, Chamoni W. H.↗

DOE OSTI2022

Role of side-chain length on gas transport of CO 2 /CH 4 mixtures in polymers with side-chain porosity

Polymers of intrinsic microporosity (PIMs) are traditionally formed from ladder backbones, but recent synthetic advances have allowed for the formation of non-traditional PIMs using a poly(ladder) motif, whereby rigid PIM-like sidechains are appended onto more flexible backbones. The effect of side-chain length on free volume and gas transport properties was recently evaluated for a methoxy-functionalized poly(ladder) (OMe-ROMP). In this study, we elaborate on the role of side-chain length and its influence on mixed-gas performance and plasticization stability for OMe-ROMP. Pure-gas sorption results are also reported, including hysteresis effects from CO 2 conditioning. Taken together, this study reveals the role of side-chain length on gas sorption, diffusion, and plasticization for CO 2 /CH 4 separations. Finally, we conclude that the length of a rigid side chain in the poly(ladder) motif is a valuable structural parameter to control sorption, diffusion, and stability towards plasticization for gas separation membrane materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Sequence-dependent self-assembly of supramolecular nanofibers in periodic dynamic block copolymers

Block copolymers (BCPs) can spontaneously self-assemble into various nanostructured morphologies which enable their diverse applications in selective membranes, polymer electrolytes, and optoelectronics. To expand the range of nanostructures accessible to block copolymers, we designed dynamic block copolymers (DBCPs) that combine the phase separation of traditional block copolymers with the supramolecular self-assembly of periodic dynamic polymers. We demonstrate that DBCPs synthesized with a periodic block sequence self-assemble into high aspect ratio supramolecular nanofibers with well-ordered PEG and PDMS domains, in contrast to those synthesized with a random sequence which do not form nanofibers but have disordered morphologies. The periodicity of the block sequence ensures regular placement of dynamic bonds along the polymer chain, which enables stacking of the hydrogen bonding units into ordered 1D supramolecular nanofibers and delays the onset of terminal flow by up to 60 °C compared to the random block sequence. The hierarchically assembled supramolecular nanofibers display complex mechanical and thermal phase behavior arising from the interplay between phase separation of the dissimilar polymer backbones and supramolecular interactions between dynamic bonds. Despite identical bulk composition, the periodic DBCPs demonstrate ionic conductivity values over two orders of magnitude higher than their random counterparts due to the formation of well-ordered, interconnected, high aspect ratio ion-transporting PEG domains. In conclusion, these results highlight the potential for DBCPs as an emerging material platform to achieve advanced, self-assembled nanostructured morphologies.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Simulations of the Biodegradation of Citrate Based Polymers for Artificial Scaffolds Using Accelerated Reactive Molecular Dynamics

Here, we explore the reactivity and mechanical properties of poly(1,6-hexanediol-co-Citric acid) via ReaxFF molecular dynamics simulations. We implement an accelerated scheme within the ReaxFF framework to study the hydrolysis reaction of the polymer which is provided with sufficient amount of energy known as the restrain energy after a suitable pre-transition state configuration is obtained to overcome the activation energy barrier and the desired product is obtained. The validity of the ReaxFF force field is established by comparing the ReaxFF energy barriers of ester and ether hydrolysis with benchmark DFT values in literature. We perform chemical and mechanical degradation of polymer chain bundles at 300 K. We find that ester hydrolyzes faster than ether due to lower activation energy barrier of the reaction. The selectivity of the bond-boost scheme has been demonstrated by lowering the boost parameters of the accelerated simulation which almost stops the ether hydrolysis. Mechanical degradation of pre-hydrolyzed and intermittent hydrolyzed polymer bundles is performed along the longitudinal direction at two different strain rates. We find that the tensile modulus of the polymers are increases with increase in strain rates which shows that polymers show a strain dependent behavior. The tensile modulus of the Polyester-ether is higher than Polyester yet reaches yield-stress faster than Polyester. This makes Polyester more ductile than Polyester-ether.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Protein-Mimetic Self-Assembly with Synthetic Macromolecules

Protein-mimetic amphiphiles have significant promise as a platform to access the complex functions of natural biological materials and incorporate the tunability and environmental resilience of synthetic materials. The fields of polymer chemistry and chemical biology have concurrently approached the development of biomimetic amphiphiles with materials ranging from random amphiphilic copolymers to peptide–lipid conjugates. In this Perspective, we incorporate strategies from diverse chemical arenas for controlling assembled morphologies and dynamics of protein-mimetic synthetic macromolecules. An overview of significant advances in peptide amphiphiles and single-chain polymer nanoparticles provides the foundation for comparing recent advances in the implementation of multiple intermolecular interactions and computational strategies to fine-tune the assembled structures. We aim to bridge these fields, combining insights from multiple disciplines to inspire new approaches for the development of protein-mimetic materials, as these assemblies have far-reaching applications including in the development of new sensors, catalysts, and therapeutics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Polymers depolymerizable by metathesis of a cleavable unit

Novel polymers are depolymerizable by metathesis of a cleavable unit. As an example, a series of linear and crosslinked polyurethanes were prepared that can be selectively depolymerized under mild conditions. Two unique polyols were synthesized bearing unsaturated units in a configuration designed to favor ring-closing metathesis to five- and six-membered cycloalkenes. These polyols were co-polymerized with toluene diisocyanate to generate linear polyurethanes and trifunctional hexamethylene- and diphenylmethane-based isocyanates to generate crosslinked polyurethanes. The polyol design is such that the ring-closing metathesis reaction cleaves the backbone of the polymer chain. Upon exposure to dilute solutions of Grubbs' catalyst under ambient conditions, the polyurethanes were rapidly depolymerized to low molecular weight, soluble products bearing vinyl and cycloalkene functionalities. These functionalities enabled further re-polymerization by traditional strategies for polymerization of double bonds. This general approach can be expanded to develop a range of chemically recyclable condensation polymers that are readily depolymerized by orthogonal metathesis chemistry.

Jones, Brad Howard↗

DOE OSTI2023

Unveiling the Role of Compositional Drifts on the Tack of Pressure‐Sensitive‐Adhesives

Abstract Pressure‐sensitive‐adhesives (PSAs) are pervasive in electronic, automobile, packaging, and biomedical applications due to their ability to stick to numerous surfaces without undergoing chemical reactions. These materials are typically synthesized by the free radical copolymerization of alkyl acrylates and acrylic acid, leading to an ensemble of polymer chains with varying composition and molecular weight. Here, reversible addition−fragmentation chain‐transfer (RAFT) copolymerizations in a semi‐batch reactor are used to tailor the molecular architecture and bulk mechanical properties of acrylic copolymers. In the absence of cross‐links, the localization of acrylic acid toward the chain ends leads to microphase separation, creep resistance, and enhanced tack. However, in the presence of Al(acac) 3 crosslinker, the creep resistance remains unchanged and mostly the large‐strain mechanical properties are affected. This behavior is attributed to microphase separation, but also to a change in the energy required to break physical associations, and untangle and elongate associative polymers to large deformations.

Polymer Science↗