Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “polycrystalline material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Cumulative fatigue damage models

The problem of calculating expected component life under fatigue loading conditions is complicated by the fact that component loading histories contain, in many cases, cyclic loads of widely varying amplitudes. In such a case a cumulative damage model is required, in addition to a fatigue damage criterion, or life relationship, in order to compute the expected fatigue life. The traditional cumulative damage model used in design is the linear damage rule. This model, while being simple to use, can yield grossly unconservative results under certain loading conditions. Research at the NASA Lewis Research Center has led to the development of a nonlinear cumulative damage model, named the double damage curve approach (DDCA), that has greatly improved predictive capability. This model, which considers the life (or loading) level dependence of damage evolution, was applied successfully to two polycrystalline materials, 316 stainless steel and Haynes 188. The cumulative fatigue behavior of the PWA 1480 single-crystal material is currently being measured to determine the applicability of the DDCA for this material.

Mcgaw, Michael A.↗
NASA NTRS1991

Property and microstructural nonuniformity in the yttrium-barium-copper-oxide superconductor determined from electrical, magnetic, and ultrasonic measurements

The purpose of this dissertation was the following: (1) to characterize the effect of pore fraction on a comprehensive set of electrical and magnetic properties for the yttrium-barium-copper-oxide (YBCO) high temperature ceramic superconductor; and (2) to determine the viability of using a room-temperature, nondestructive characterization method to aid in the prediction of superconducting (cryogenic) properties. The latter involved correlating ultrasonic velocity measurements at room temperature with property-affecting pore fraction and oxygen content variations. The use of ultrasonic velocity for estimating pore fraction in YBCO is presented, and other polycrystalline materials are reviewed, modeled, and statistically analyzed. This provides the basis for using ultrasonic velocity to interrogate microstructure. The effect of pore fraction (0.10-0.25) on superconductor properties of YBCO samples was characterized. Spatial (within-sample) variations in microstructure and superconductor properties were investigated, and the effect of oxygen content on elastic behavior was examined. Experimental methods used included a.c. susceptibility, electrical, and ultrasonic velocity measurements. Superconductor properties measured included transition temperature, magnetic transition width, transport and magnetic critical current density, magnetic shielding, a.c. loss, and sharpness of the voltage-current characteristics. An ultrasonic velocity image constructed from measurements at 1mm increments across a YBCO sample revealed microstructural variations that correlated with variations in magnetic shielding and a.c. loss behavior. Destructive examination using quantitative image analysis revealed pore fraction to be the varying microstructural feature.

Roth, Don J.↗
NASA NTRS1992

Correlation of deformation mechanisms with the tensile and compressive behavior of NiAl and NiAl(Zr) intermetallic alloys

To identify the mechanisms controlling strength and ductility in powder-extruded NiAl and NiAl + 0.05 at. pct Zr, tensile and compressive testing was performed from 300 to 1300 K for several grain sizes. Grain size refinement significantly increased yield stress in both alloys and, in some cases, slightly lowered the ductile-to-brittle transition temperature (DBTT), although no room-temperature tensile ductility was observed even in the finest grain size specimens. The small Zr addition increased the DBTT and changed the low-temperature fracture mode from intergranular in NiAl to a combination of intergranular and transgranular in the Zr-doped alloy. Scanning electron microscopy of compression specimens deformed at room temperature revealed the presence of grain-boundary cracks in both alloys. These cracks were due to the incompatibility of strain in the polycrystalline material, owing to the lack of five independent slip systems. The tendency to form grain-boundary cracks, in addition to the low fracture stress of these alloys, contributed to the lack of tensile ductility at low temperatures.

Bowman, R. R.↗
NASA NTRS1992

Energetics and structural properties of twist grain boundaries in Cu

Structural and energetics properties of atoms near a grain boundary are of great importance from theoretical and experimental standpoints. From various experimental work it is concluded that diffusion at low temperatures at polycrystalline materials take place near grain boundary. Experimental and theoretical results also indicate changes of up to 70 percent in physical properties near a grain boundary. The Embedded Atom Method (EAM) calculations on structural properties of Au twist grain boundaries are in quite good agreement with their experimental counterparts. The EAM is believed to predict reliable values for the single vacancy formation energy as well as migration energy. However, it is not clear whether the EAM functions which are fitted to the bulk properties of a perfect crystalline solid can produce reliable results on grain boundaries. One of the objectives of this work is to construct the EAM functions for Cu and use them in conjunction with the molecular static simulation to study structures and energetics of atoms near twist grain boundaries in Cu. This provides tests of the EAM functions near a grain boundary. In particular, we determine structure, single vacancy formation energy, migration energy, single vacancy activation energy, and interlayer spacing as a function of distance from grain boundary. Our results are compared with the available experimental and theoretical results from grain boundaries and bulk.

Karimi, Majid↗
NASA NTRS2000

Float-Zone Growth of Gel-xSix (x ? 10 at .%) Single Crystals: Influence of Thermocapillary and Solutocapillary Convection

Gel-xSix (x ? 10 at.%) single crystals have been grown with the float-zone technique applied within a monoellipsoid mirror furnace. The feed crystal consisted of synthesized GeO.95siO.05 polycrystalline material. Two Boron-doped (much much more than 1-2 (raised dot) 1017 at/cm3) crystals were grown under identical conditions using <100> Ge seeds. One Ge:Ga-doped (much much more than 1018 at/cm3) reference crystal was also grown in the same furnace. Compositional profiles were measured with an energy dispersive analysis by X-ray (EDAX). The maximum silicon concentration attained was 10 at.%. Micrographs of the etched crystals show sharp changes in interface curvature at the crystal edges. These are considered to be caused by solutal Marangoni convection, whose strength is assumed to be a direct function of silicon concentration, Theoretical considerations show that the flow direction, velocity, and strength varies significantly from a solutal Marangoni convection regime directly in front of the solid-liquid interface to a thermal Marangoni convection regime within the bulk melt.

Campbell, Tom A.↗
NASA NTRS2013

Empirical Study of the Multiaxial, Thermomechanical Behavior of NiTiHf Shape Memory Alloys

An empirical study was conducted to characterize the multiaxial, thermomechanical responses of new high temperature NiTiHf alloys. The experimentation included loading thin walled tube Ni(sub 50.3)Ti(sub 29.7)Hf(sub 20) alloy samples along both proportional and nonproportional axial-torsion paths at different temperatures while measuring surface strains using stereo digital image correlation. A Ni(sub 50.3)Ti(sub 33.7)Hf(sub 16) alloy was also studied in tension and compression to document the effect of slightly depleting the Hf content on the constitutive responses of NiTiHf alloys. Samples of both alloys were made from nearly texture free polycrystalline material processed by hot extrusion. Analysis of the data shows that very small changes in composition significantly alter NiTiHf alloy properties, as the austenite finish (Af) temperature of the 16-at Hf alloy was found to be approximately 60 C less than the 20-at Hf alloy (approximately 120 C vs. 180 C). In addition, the 16-at Hf alloy exhibited smaller compressive transformation strains (2 vs. 2.5 percent). Multi-axial characterization of the 20-at % Hf alloy showed that while the random polycrystal transformation strains in tension (4 percent) and compression (2.5 percent) are modest in comparison with binary NiTi (6 percent, 4 percent), the torsion performance is superior (7 vs. 4 shear strain width to the pseudoelastic plateau).

tensile deformation↗
DOE OSTI2021

Multimodal X-ray Microscopy: The Kinetics of Cu in CdTe Absorbers

The behavior of solar cells is very often limited by inhomogeneously distributed nanoscale defects. This is the case throughout the entire lifecycle of the solar cell, from the distribution of elements and defects during solar cell growth as well as the charge-collection and recombination during operation, to degradation and failure mechanisms due to impurity diffusion, crack formation, and irradiation- and heat-induced cell damage This has been known for a while in the field of crystalline silicon, but inhomogeneities are far more abundant in polycrystalline materials, and are the limiting factor in thin-film solar cells where grain sizes are often on the order of the diffusion length. We showed that the high penetration of hard X-rays combined with the high sensitivity to elemental distribution, structure, and spatial resolution offers a unique avenue for highly correlative studies at the nanoscale. We presented results on Cu-doped CdTe, where carrier collection is directly correlated to the kinetics of Cu inside the absorber and the particular Cu-phases at the ZnTe/CdTe interface. We complemented the results with modeling using PVRD-FASP and PyCDTS, where the X-ray beam induced profile can be reproduced by the equilibrium defect concentrations proposed by the solvers.

Bertoni, Mariana↗
DOE OSTI2025

Attribution of heterogeneous stress distributions in low-grain polycrystals under conditions leading to damage

In high-purity polycrystalline metallic materials, voids tend to favor grain boundaries as nucleation sites due to the elevated stress states produced by granular interactions and the weakened grain boundary from the relative atomic disorder. To quantify the key factors of this elevated stress state, simple compression of a small multi-grain cylinder of body-centered cubic tantalum was simulated using a single crystal plasticity model that incorporates non-Schmid effects. Four increasingly complex synthetic microstructures were created to tractably incorporate grain boundary interactions, and a statistically significant number of combinations were performed by varying the initial crystallographic orientations of the microstructure. Most of these simulations produce the maximum von Mises stress on a grain boundary and less frequently at the multi-grain junctions. To build a statistical model for the maximum von Mises stress at the grain boundary, physically based features that could contribute to the elevated stress state were selected. Then, a learning algorithm based on information theory was used to identify which of these features contributed the most information to the data set. The identified features include a grain’s propensity to accommodate both elastic and plastic deformations and their directional components. The misalignment of the direction of each grain’s mechanical response was found to be strongly correlated to the magnitude of the stress near the grain boundary. For all of the synthetic microstructures, the statistical models produce a residual distribution that is nearly Gaussian with a variance of, at most, 10% of the prior distribution. The successful performance of the statistical model implies the correct identification of the physical features that cause severe stress localization in polycrystalline materials. The statistical models constructed here can be used to formulate a physically motivated void nucleation model which is sensitive to a microstructure’s propensity to produce elevated stress states. As a result, these statistical models also enable the design of material microstructures, in which the crystallographic orientation is chosen to resist void nucleation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Negligible spin–charge conversion in Bi films and Bi/Ag(Cu) bilayers

Spin pumping experiments using ferromagnetic metals have reported highly efficient spin–charge conversion in Bi and at the Bi/Ag interface, possibly due to the inverse Rashba–Edelstein effect. However, longitudinal spin Seebeck effect experiments using the yttrium iron garnet ferrimagnetic insulator in Bi films and Bi/Ag bilayers do not show evidence of appreciable spin-to-charge conversion except the large Nernst signal inherent to Bi. These contrasting conclusions highlight the differences between magnetic metals and magnetic insulators as spin current injectors. Only the detected voltages that adhere to the inverse spin Hall effect of j C = (2e/h)θ SH j S x σ are due to spin currents.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effect of void positioning on the detonation sensitivity of a heterogeneous energetic material

We show although it is well-established that voids profoundly influence the initiation and reaction behaviors of heterogeneous energetic materials such as polymer-bonded explosives (PBX) and propellants, there has been little study of how void location in different constituents in the microstructures of such materials affect the macroscale behavior. Here, we use three-dimensional (3D) mesoscale simulations to study how void placement within the reactive grains versus the polymer binder influences the shock-to-detonation transition (SDT) in a polymer-bonded explosive. The material studied here has a microstructure comprised of 75% PETN (pentaerythritol tetranitrate) grains and 25% HTPB (hydroxyl-terminated polybutadiene) polymer binder by volume. Porosities up to 10% in the form of spherical voids distributed in both the grains and polymer are considered. An Arrhenius reactive burn relation is used to model the chemical kinetics of the PETN grains under shock loading, thereby resolving the heterogeneous detonation behavior of the PBX. The influence of void location on the shock initiation sensitivity of the material is quantitatively ranked by comparing the predicted run distance to detonation (RDD) for each sample. The analysis includes inherent quantification of uncertainties arising from the stochastic variations in the microstructure morphologies and void distributions by using statistically equivalent microstructure sample sets (SEMSS), leading to probabilistic formulations for the RDD as a function of shock pressure. The calculations reveal that the location of voids in the composite microstructure significantly affects the RDD. Specifically, voids exclusively within the grains cause the PBX to be more sensitive (having shorter RDD) than voids in the polymer binder. Unique probabilistic relationships are derived to map the probability of observing RDD for each void location material case, allowing for prediction of initiation behavior anywhere in the shock pressure – RDD space. These findings agree with trends reported in the literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1995

Single-Crystal Springs For Accelerometers

Thermal noise reduced, enabling use of smaller proof masses. Spring-and-mass accelerometers in which springs made of single-crystal material being developed. In spring-and-mass accelerometer, proof mass attached to one end of spring, and acceleration of object at other end of spring measured in terms of deflection of spring, provided frequency spectrum of acceleration lies well below resonant frequency of spring-and-proof-mass system. Use of single-crystal spring materials instead of such polycrystalline spring materials as ordinary metals makes possible to construct highly sensitive accelerometers (including seismometers) with small proof masses.

Vanzandt, Thomas R.↗
DOE OSTI2023

Efficient charge to spin conversion in iridium oxide thin films

Many 5d transition metal oxides have a unique electronic structure, where the density of states near the Fermi level is dominated by only 5d electrons with strong spin–orbit coupling. IrO 2 , a Dirac nodal line semi-metal, is the simplest of these oxides. The presence of 5d electrons and gap opening of Dirac nodal lines via strong spin–orbit coupling allows for the hybridization of the 5d electrons of the oxide with the itinerant d electrons of a ferromagnet, while simultaneously increasing the intrinsic spin Hall effect. We report large charge-to-spin conversion in thin films of this material using spin-torque ferromagnetic resonance experiments. Finally, by independently performing line shape analysis and linewidth modulation experiments, we conclusively determine the spin Hall angle of optimized IrO 2 films to be ∼8 times larger than that of Pt.

Ferromagnetic materials↗
DOE OSTI2025

Synthesis of inter‐lanthanide sesquioxides LnLn'O 3 by polymeric steric entrapment

Lanthanide oxides are well known in the fields of optical, electronic, and magnetic materials. Even so, there are many application spaces yet to be explored. Previous modeling of inter-lanthanide sesquioxides, in which the compound contains two lanthanide cations, predicts the lowest level energy structure as a function of chemistry, which this work seeks to verify. Three materials of interest, ErLuO 3 , LaLuO 3 , and SmLuO 3 , were synthesized for the first time by the polymeric steric entrapment (PSE) method. X-ray diffraction confirms the stable state predictions of ErLuO 3 and SmLuO 3 forming a bixbyite type structure and LaLuO 3 forming a perovskite type structure. This work demonstrates PSE as a viable and reliable route toward the synthesis of these unique materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Enabling resonant ultrasound spectroscopy in high magnetic fields

Resonant ultrasound spectroscopy (RUS) is a powerful method to determine elastic constants with high accuracy and precision from a single measurement of the mechanical resonances of a sample. Conventionally, the quantitative extraction of elastic moduli with RUS assumes free boundary conditions which can often lead to the adoption of unstable sample positioning between ultrasonic transducers that is incompatible with extreme environments like high magnetic fields. We show that, under specific conditions, introducing a small amount of adhesive between a RUS sample and ultrasonic transducers introduces a perturbation to the free resonance condition which can be accounted for by a simple model. This means elastic constants can be determined to within the uncertainty of conventional RUS, but with significant improvements including sample stability and control of sample orientation. We demonstrate the efficacy of this approach with measurements on a range of materials including room temperature measurements on polycrystalline metals, temperature-dependent measurements of the structural phase transition in strontium titanate single crystals, and magnetic field-dependent measurements of magnetic phase transitions in gadolinium polycrystals up to 14 T.

47 OTHER INSTRUMENTATION↗
NASA NTRS1965

Effect of Nuclear Radiation on Materials at Cryogenic Temperatures

The tensile properties for 33 polycrystalline structural materials including aluminum, titanium, nickel and iron alloys were obtained at -256.5 C (30 deg R) after irradiation exposure at this temperature to 10(exp 17) nvt (E greater than 0.5 Mev), at -256.5 C without previous irradiation, and at approximately 27 C (540 deg R) without previous irradiation. The data were evaluated statistically to permit identification of cryogenic effects and nuclear-cryogenic effects. A number of conclusions were drawn regarding suitability of certain of the materials for use in nuclear-cryogenic applications and regarding the need for further investigation.

NEUTRON BOMBARDMENT↗
DOE OSTI2020

Thermal properties of BaCu 2 SnQ 4 (Q = S, Se) quaternary chalcogenides

Quaternary chalcogenides form in different structure types and compositions and are of scientific interest, while their diversity of physical properties exemplifies why they continue to be investigated for potential technological applications. Here, we investigate the thermal properties of BaCu 2 SnQ 4 with trigonal (Q = S) and orthorhombic (Q = Se) crystal structures. BaCu 2 SnS 2 Se 2 was also synthesized and characterized in order to investigate the effect of alloying on the thermal properties of these quaternary chalcogenides. The low thermal conductivity these materials possess originates from complex phonon spectra and local dynamics of distorted CuQ 4 tetrahedra. Our results and analyses are presented in light of the ongoing fundamental interest in these materials as well as their continued interest for energy-related and opto-electronic applications.

36 MATERIALS SCIENCE↗
NASA NTRS1985

The mechanism of erosion of metallic materials under cavitation attack

The mean depth of penetration rates (MDPRs) of eight polycrystalline metallic materials, Al 6061-T6, Cu, brass, phosphor bronze, Ni, Fe, Mo, and Ti-5Al-2.5Sn exposed to cavitation attack in a viscous mineral oil with a 20 kHz ultrasonic oscillator vibrating at 50 micron amplitude are reported. The titanium alloy followed by molybdenum have large incubation periods and small MDPRs. The incubation periods correlate linearly with the inverse of hardness and the average MDPRs correlate linearly with the inverse of tensile strength of materials. The linear relationships yield better statistical parameters than geometric and exponential relationships. The surface roughness and the ratio of pit depth to pit width (h/a) increase with the duration of cavitation attack. The ratio h/a varies from 0.1 to 0.8 for different materials. Recent investigations (20) using scanning electron microscopy to study deformation and pit formation features are briefly reviewed. Investigations with single crystals indicate that the geometry of pits and erosion are dependent on their orientation.

Rao, B. C. S.↗