Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase association”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Observations and Simulations of Dropout Events and Flux Decays in October 2013: Comparing MEO Equatorial With LEO Polar Orbit

We compare ESA PROBA-V observations of electron flux at LEO with those from the NASA Van Allen Probes mostly at MEO for October 2013. Dropouts are visible at all energy during four storms from both satellites. Equatorially trapped electron fluxes are higher than at LEO by 10 2 (<1 MeV) to 10 5 (>2.5 MeV). We observe a quite isotropic structure of the outer belt during quiet times, contrary to the inner belt, and pitch angle dependence of high energy injection. We find a very good overlap of the outer belt at MEO and LEO at ~0.5 MeV. We use test-particle simulations of the energetic electrons trapped in the terrestrial magnetic field to study the outer radiation belt electron flux changes during geomagnetic storms. We show that the Dst (Disturbance storm time) effect during the main phase of a geomagnetic storm results in a betatron mechanism causing outward radial drift and a deceleration of the electrons. This outward drift motion is energy independent, pitch angle-dependent, and represents a significant distance (~1 L-shell at L = 5 for moderate storms). At fixed L-shell, this causes a decay of the LEO precipitating flux (adiabatic outward motion), followed by a return to the normal state (adiabatic inward motion) during main and recovery phases. Dst effect, associated with magnetopause shadowing and radial diffusion can explain the main characteristics of outer radiation belt electron dropouts in October 2013. We also use Fokker-Planck simulations with event-driven diffusion coefficients at high temporal resolution, to distinguish instantaneous loss from the gradual scattering that depopulates the slot region and the outer belt after storms. Simulations reproduce the slot formation and the gradual loss in the outer belt. The typical energy dependence of these losses leads to the absence of scattering for relativistic and ultra-relativistic electrons in the outer belt, oppositely to dropouts.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Thermodynamic evidence for polaron stabilization inside the antiferromagnetic order of Eu5In2Sb6

Abstract Materials exhibiting electronic inhomogeneities at the nanometer scale have enormous potential for applications. Magnetic polarons are one such type of inhomogeneity which link the electronic, magnetic and lattice degrees of freedom in correlated matter and often give rise to colossal magnetoresistance. Here, we investigate single crystals of Eu 5 In 2 Sb 6 by thermal expansion and magnetostriction along different crystallographic directions. These data provide compelling evidence for the formation of magnetic polarons in Eu 5 In 2 Sb 6 well above the magnetic ordering temperature. More specifically, our results are consistent with anisotropic polarons with varying extent along the different crystallographic directions. A crossover revealed within the magnetically ordered phase can be associated with a surprising stabilization of ferromagnetic polarons within the global antiferromagnetic order upon decreasing temperature. These findings make Eu 5 In 2 Sb 6 a rare example of such coexisting and competing magnetic orders and, importantly, shed new light on colossal magnetoresistive behavior beyond manganites.

Dawczak-Dębicki, Hubert↗
DOE OSTI2021

Metastable Materials Discovery in the Age of Large-Scale Computation

Computational materials discovery has been successful in predicting novel, technologically relevant materials. However, it has remained focused almost exclusively on finding ground-state structures. Now that the lower-hanging fruit has been found in many fields of application, materials exploration is moving toward metastable materials: higher energy phases that are stable at practical time scales. Because of the challenges associated with predicting which phases are realistic, this class of materials has remained relatively unexplored, despite numerous examples of metastable structures with unmatched properties (e.g., diamond). This article highlights recent advances in developing computational and theoretical methods for predicting useful and realizable metastable materials. Topics discussed cover (1) the latest strategies for identifying potential metastable phases, (2) methodologies for assessing which phases can be realized experimentally, and (3) current approaches to estimate the lifetime of metastable materials.

amorphous materials↗
DOE OSTI2022

Magnetic moments and spin structure in single-phase B20 Co 1+x Si 1-x (x = 0.043)

Neutron powder diffraction (NPD) and x-ray magnetic circular dichroism (XMCD) spectroscopy are employed to investigate the magnetism and spin structure in single-phase B20 Co 1.043 Si 0.957 . The magnetic contributions to the NPD data measured in zero fields are consistent with the helical order among the allowed spin structures derived from group theory. The magnitude of the magnetic moment is (0.3 ± 0.1) μ B /Co according to NPD, while the surface magnetization probed by XMCD at 3 kOe is (0.18–0.31) μ B /Co. Both values are substantially larger than the bulk magnetization of 0.11 μ B /Co determined from magnetometry at 70 kOe and 2 K. Finally, these experimental data indicate the formation of a helical spin phase and the associated conical states in high magnetic fields.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Drying and Analysis of Aluminum (Oxy)hydroxide Films for Dry Storage of Aluminum-Clad Spent Nuclear Fuels

In aluminum-clad spent nuclear fuels, an (oxy)hydroxide layer on the surface of the cladding hosts chemisorbed water formed during reactor and post-discharge exposure to water. Any residual water is susceptible to generating hydrogen via radiolysis, which can be a risk associated with dry fuel storage. Engineering-scale forced helium dehydration (FHD) and vacuum drying tests were conducted on mock-up fuel assemblies that included corroded aluminum surrogate plates to assess the removal of bulk and chemisorbed water. Thermogravimetric analysis was performed on samples of the surrogate plates, both undried control samples used to determine onset temperatures associated with a phase change occurring in the oxide layer and samples from drying tests used to determine the effectiveness of each drying method. Both vacuum drying and FHD processes were capable of removing bulk water. However, FHD was determined to provide additional drying capabilities, including partial removal of chemisorbed water from bayerite due to the higher temperatures during drying. In conclusion, the temperature threshold for partial dehydroxylation of the oxide layer was determined to be around 220°C, meaning any drying methods attempting to remove chemisorbed water must exceed 220°C.

chemisorbed water↗
DOE OSTI2026

Back-to-back dijet production in DIS at arbitrary Bjorken x: TMD gluon distributions to twist-3 accuracy

We derive the gluon transverse-momentum-dependent (TMD) operator structure of back-to-back\\\\r\\\\nquark–antiquark dijet production in deep inelastic scattering at arbitrary Bjorken-x to twist-3 ac\\\\r\\\\ncuracy. Working at leading order in the strong coupling and in the kinematic regime where the\\\\r\\\\ntransverse momentum imbalance of the jets is much smaller than their individual transverse mo\\\\r\\\\nmenta, we perform a systematic gradient expansion of the quark propagator in a background gluon\\\\r\\\\nfield. This expansion organizes multiple interactions with the target in terms of longitudinal Wilson\\\\r\\\\nlines and gauge-invariant field-strength insertions, yielding a TMD description valid beyond the\\\\r\\\\nstrict high-energy eikonal (x → 0) approximation. We obtain explicit cross sections for longitudi\\\\r\\\\nnally and transversely polarized virtual photons, identifying all contributing gluon TMD operators\\\\r\\\\nup to twist-3, including structures involving F+−, Fij, and three-gluon correlators. The full lon\\\\r\\\\ngitudinal phase eixP+z− associated with Bjorken-x is retained throughout. In the small-x limit,\\\\r\\\\nour results reproduce the known sub-eikonal expressions obtained in the Color Glass Condensate\\\\r\\\\nframework, establishing a direct connection between the general-x TMD expansion and high-energy\\\\r\\\\nfactorization. We further reduce the operator basis using equations of motion, minimizing the num\\\\r\\\\nber of independent nonperturbative matrix elements entering the cross section. This work provides\\\\r\\\\na systematic foundation for extending TMD analyses of dijet production beyond leading twist, es\\\\r\\\\ntablishing a unified operator framework valid at arbitrary Bjorken-x that smoothly interpolates\\\\r\\\\nbetween moderate- and small-x descriptions of gluon TMDs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Two phase transitions driven by surface electron doping in WTe 2

WTe 2 is a multifunctional quantum material exhibiting numerous emergent phases in which tuning of the carrier density plays an important role. In this work, we demonstrate two nonmonotonic changes in the electronic structure of WTe 2 upon in situ electron doping. The first phase transition is interpreted in terms of a shear displacement of the top WTe 2 layer, which realizes a local crystal structure not normally found in bulk WTe 2 . The second phase transition is associated with stronger interactions between the dopant atoms and the host, both through hybridization and electric field. These results demonstrate that electron doping can drive structural and electronics changes in bulk WTe 2 with implications for realizing nontrivial band-structure changes in heterointerfaces and devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Flexocaloric effect near a ferroelastic transition

A Ginzburg-Landau model embedded into a vibrational model is used to study the flexocaloric effect in a beam near a ferroelastic transition. The caloric response upon bending is characterized by the isothermal entropy change and the adiabatic temperature change of the beam. Here, we obtain a larger response relative to the strength of the applied forces at temperatures slightly above the transition temperature. It is also obtained that the maximum caloric response is almost linear with the bending angle of the beam, whereas the relation between the bending angle and the applied forces is highly nonlinear. Small hysteresis associated with the phase transition is obtained for sufficiently large bending forces due to the existence of a critical point in the temperature-stress phase diagram of the ferroelastic material. Finally, the microstructure changes with bending in the beam are consistent with previous experimental observations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Effects of strain and defects on the topological properties of HfTe 5

Manipulating topological states is a topic of vigorous research. However, the impact of such topological phase transitions on the quasiparticle dynamics remains elusive. Here, in this work, we present the effects of a transition from a strong to weak topological insulator in HfTe 5 as a function of Te vacancy concentration. We observed a significant transition from distinct sharp surface states and Dirac crossing to a Fermi-liquid-like quasiparticle state in which these surface-localized features are heavily suppressed. Additionally, by inducing the same effect through applied uniaxial stress, we demonstrate that changes in the lattice constants play the foremost role in determining the electronic structure, self-energy, and topological states of HfTe 5 . Our results demonstrate the possibility of using both defect chemistry and strain as control parameters for topological phase transitions and associated many-body physics.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Asymptotic behavior of the Fourier coefficients and the analytic structure of the QCD equation of state

In this paper we study the universal properties of the baryon chemical potential Fourier coefficients in quantum chromodynamics. We show that by following a well-defined strategy, the Fourier coefficients can be used to locate Yang-Lee edge singularities associated with chiral phase transition (and by extension with the Roberge-Weiss) in the complex chemical potential plane. We comment on the viability of performing this analysis using lattice QCD data. Published by the American Physical Society 2024

Astronomy & Astrophysics↗
DOE OSTI2024

Persistent Hot-Spot Mix in Cryogenic Direct-Drive Fusion Experiments

We show that an x-ray emission signature associated with acceleration phase mass injection correlates with poor experimental hot-spot convergence and a reduced neutron production relative to expectations. It is shown that with increased target mass as well as with higher-design adiabats, this signature is reduced, whereas with increased debris on the target the signature is increased. Here, we estimate that the vapor region in typical best designs may have up to 2x the assumed hydrogen mass at the start of deceleration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Data for "Relative Reactivity and Bioavailability of Mercury Sorbed to or Coprecipitated with Aged Iron Sulfides"

The potential for inorganic mercury (Hg) to be converted to methylmercury depends, in part, on the chemical form of Hg and its bioavailability to anaerobic microorganisms that can methylate Hg. In anaerobic settings, Hg can be associated with sulfide phases, including ferrous iron sulfide (FeS), which can sorb or coprecipitated with Hg. The objective of this study was to determine if the aging state of FeS alters the Hg coordination environment as well as the reactivity and bioavailability of sorbed and coprecipitated Hg species. FeS particles were synthesized with and without Hg2+ and aged in anaerobic conditions for multiple time frames spanning from 1 hour to 1 month. For FeS particles synthesized without Hg, Hg2+ was subsequently sorbed to the FeS for 1 day. Analysis of Hg speciation of these materials by X-ray absorption near edge spectroscopy revealed a predominance of 4-coodinate Hg-S species in the sorbed Hg-FeS solids and a mixture of 2- and 4-coordinate Hg-S in the coprecipitated Hg-FeS. The leaching potential of the Hg was assessed by exposing the particles to a solution of dissolved glutathione (a thiolate-based Hg chelator). As expected, the sorbed Hg-FeS released more soluble Hg compared to the co-precipitated Hg-FeS. However, when these particles were exposed to Desulfovibrio desulfuricans ND132 (a known Hg methylator), more Hg was methylated from the co-precipitated Hg-FeS than the sorbed Hg-FeS, consistent with expectations from the Hg-S coordination state and inconsistent with the selective leaching results. Overall, these results suggest that the bioavailability of particulate Hg cannot be easily discerned by leaching potential into bulk solution. Rather, bioavailability entails more subtle interactions at particle-cell interfaces and perhaps correlates with the local Hg-S coordination state in the particles. This data package contains data shown in the referenced publication, including all figures. Each figure is available in the respective *.csv file and a summary of all files are also included in the the xlsx file. Additional formatted data include X-ray diffraction data of the FeS solids are also available in a HPF format (Panalytical software), X-ray absorption spectroscopy data as *.prj files (Athena), and X-ray fluorescence data in its raw data form.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Momentum Compaction, Phase-Slip Factor and Gamma Transition in a Synchrotron

A synchrotron is the workhorse in charged particle acceleration and is applied for charged particles acceleration and ion acceleration to the highest energies [1, p. 77]. During the acceleration of a charged particle, each particle experiences a longitudinal force opposite in sign to it’s “displacement from the central particle” like in a harmonic oscillator. This motion is similar also to the transverse motion of the particle in the accelerator (betatron oscillations) and this is the reason that the particle stays inside the bucket during the acceleration. In this technical note, we discuss the concepts like, transition energy, momentum compaction and phase slip factor associated with a synchrotron accelerator, and we use a simple example to present the physical meaning of the “transition energy”. We present a simple model of a circular accelerator having straight sections and bends only to provide an explanation and the physical meaning of transition energy.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Novel ceramic capacitors with ultrahigh energy density and efficiency (Final Technical Report)

Antiferroelectric ceramics are a special class of material that have shown great potential as the dielectric in electrical capacitors due to their high energy- and power-density. During each charge-discharge cycle, the ceramic undergoes transformation to a ferroelectric phase and resumes its antiferroelectric phase. The hysteresis associated with the transitions leads to a mediocre energy efficiency and service lifetime of antiferroelectric capacitors and, hence, their almost absence in commercial products. Under the support of this research project, we first formulated a universal lattice-compatibility theory that included electrostatic polarization energy along with elastic energy and thermal energy to understand the origin of the hysteresis in antiferroelectric oxides. Guided by this compatibility theory, we conducted high-throughput density functional theory (DFT) calculations to assess chemical modifiers and their effect on crystal structures of 400+ PbZrO 3 -based compositions. Down-selected compositions were experimentally validated for their suppressed hysteresis and higher energy efficiency. The verified low-hysteresis compositions were then expanded to an antiferroelectric ceramic library with nearly 500 new compositions (more than 1,500 samples) using high-throughput experiments involving ceramic synthesis and property screening. The large quantity of data generated (theory and experimental) in these tasks were processed by machine-learning techniques and identified trends were fed to the next iteration. In the end, we successfully discovered four compositions with near-zero hysteresis, yielding a world-record energy efficiency of 98.2% at an energy density of 3.0 J/cm 3 . Furthermore, our antiferroelectric ceramic capacitor reaches 79.5 million charge-discharge cycles lifetime, a factor of 80 enhancement over previous antiferroelectric ceramics with large hysteresis. These research accomplishments have not only met the milestones set in the SOPO, but also led to two patent filings, three journal publications (one of them was in Advanced Materials, impact factor 29.4), and nine oral presentations at various venues. Through the course of the project, three postdocs, four Ph.D. students, and one M.S. student were trained. In short, our project established a new methodology in searching next-generation functional ceramics on the fundamental side and discovered several high-efficiency antiferroelectric compositions for capacitors on the applied side. Once fabricated into the multilayer form for commercial applications, these ceramic capacitors can potentially enable the high temperature high power density DC-link capacitors that are critical for the next generation inverters in electric vehicles. The project also significantly contributed to the nation’s workforce development in the STEM fields.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Fluidized Bed Gasification For Conversion of Biomass and Waste Materials to Renewable Hydrogen

This project was undertaken in order to study the potential for hydrogen production, at low cost, from mixtures of biomass and municipal solid waste (MSW). This approach allows for the production of hydrogen with a very low fossil carbon burden, while taking advantage of tipping fees (associated with MSW) to improved process economics. The team sourced three primary feedstocks (wood, MSW, and waste plastics) and characterized them comprehensively using established techniques with a long track record in the field of gasification. All three primary feedstocks were highly reactive and lost most of their mass during initial devolatilization. The production of tars, including heavy tars, was quite high, and was most problematic in the case of the MSW and Waste Plastics feedstocks. Little practical difference was identified between the MSW and Waste Plastics materials, and the addition of bed-forming materials (dolomite and brown alumina) to the feedstocks was found to reduce production of tars during devolatilization under thermogravimetric analysis and/or Fischer Assay conditions. A series of four tests in a lab-scale bubbling-fluidized-bed gasifier, at 50 psig of pressure and about 825 C, confirmed these findings. Pellet feedstocks, broken into fragments, were used for these tests, and pellets comprised of 50% MSW and 50% biomass were found to be the best option in terms of fossil carbon burden, economic potential, and gasification characteristics. Tests were then undertaken in a pilot-scale gasifier facility based on the GTI U-Gas fluidized-bed gasification technology. The feedstock handling train of the 20 TPD U-Gas pilot-scale gasifier located in Des Plaines, IL, was operated under simulated gasification conditions, and the 50/50 pellets were found to be very robust and unproblematic. An improved design for the forward end of the feedstock injection screw of the gasifier was developed and installed. The design approach was based on improved passive cooling of the front-most shroud at the end of the screw, since this approach was found in comprehensive modeling studies to be more than sufficient to accomplish the project objectives associated with this phase of the work, while also avoiding thermal gradients that could have caused heat-stress-induced damage to the refractory around the feedstock inlet if an active cooling approach had been applied. Careful technoeconomic analysis (TEA) of two possible 1000 TPD facilities was carried out. The TEA of conversion of MSW with corn stover in one case, and MSW with woody feedstock in the other case, showed that both had the potential to provide hydrogen at about $1/kg (minimum selling price, 2018 dollar basis). Of the two TEA cases, the one that was based on the conversion of wood in the southeastern USA was found to have slightly better economic potential. The other TEA case was based on a real location in Nebraska and called for corn stover feedstock conversion along with MSW. An underserved communities outreach program plan was developed in cooperation with personnel from the Nebraska Public Power District.

08 HYDROGEN↗
DOE OSTI2025

A Unified Model of Kilonovae and Gamma-Ray Bursts in Binary Mergers Establishes Neutron Stars as the Central Engines of Short GRBs

We expand the theoretical framework by O. Gottlieb et al., which connects binary merger populations with long and short binary gamma-ray bursts (lbGRBs and sbGRBs, respectively), incorporating kilonovae (KNe) as a key diagnostic tool. We show that lbGRBs, powered by massive accretion disks around black holes (BHs), should be accompanied by bright, red KNe. In contrast, sbGRBs—if also powered by BHs—would produce fainter, red KNe, potentially biasing against their detection. However, magnetized hypermassive neutron star (HMNS) remnants that precede BH formation can produce jets with power (P NS ≈ 10 51 erg s –1 ) and Lorentz factor (Γ > 10) likely compatible with sbGRB observations, and would result in distinctly bluer KNe, offering a pathway to identifying the sbGRB central engine. Recent modeling by J. C. Rastinejad et al. found luminous red KNe consistently accompany lbGRBs, supporting their origin in BH-massive disk systems, likely following a short-lived HMNS phase. The preferential association of sbGRBs with comparably luminous KNe argues against the BH engine hypothesis for sbGRBs, while the bluer hue of these KNe provides additional support for an HMNS-driven mechanism. Within this framework, BH–NS mergers likely contribute exclusively to the lbGRB population with red KNe. Our findings suggest that GW170817 may, in fact, have been an lbGRB to on-axis observers. Finally, we discuss major challenges faced by alternative lbGRB progenitor models, such as white dwarf–NS or white dwarf–BH mergers and accretion-induced collapse forming magnetars, which fail to align with observed GRB timescales, energies, and KN properties.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Growth-associated polyhydroxybutyrate accumulation in Azospira suillum PS during aerobic and perchlorate respiration

Polyhydroxyalkanoates (PHAs) are widespread microbial storage polymers increasingly recognized for roles beyond carbon and energy storage, including redox homeostasis and stress physiology. While PHA accumulation is classically associated with stationary-phase metabolism under severe nutrient imbalance, comparatively little is known about growth-associated PHA synthesis in facultative anaerobes with unusual respiratory strategies. Here, we investigated polyhydroxybutyrate (PHB) metabolism in Azospira suillum PS, a genetically tractable perchlorate-reducing bacterium capable of both aerobic and anaerobic respiration. Using physiological growth experiments, targeted gene deletions, PHB extractions, and intracellular redox measurements, we examined PHB accumulation under varying respiratory and nutrient conditions. We demonstrate that PHB accumulates during exponential growth under moderately nitrogen-limited conditions, both aerobically and during perchlorate respiration, representing a rare example of growth-associated PHB synthesis under anaerobic conditions. Genomic analysis revealed four phaC homologs, one of which could not be deleted under the experimental conditions tested and co-localized with phaB and phaR. Redox profiling further revealed a strong positive correlation between PHB accumulation and intracellular NADPH/NADP+ ratios. Together, these findings expand the physiological contexts in which PHB synthesis is known to occur and highlight perchlorate-respiring bacteria as underexplored model systems for studying growth-integrated carbon and redox storage strategies.

Meier, David A O↗
DOE OSTI2024

Gravitational Waves from Nnaturalness

Abstract We study the prospects for probing the Nnaturalness solution to the electroweak hierarchy problem with future gravitational wave observatories. Nnaturalness, in its simplest incarnation, predictsNcopies of the Standard Model with varying Higgs mass parameters. We show that in certain parameter regions the scalar reheaton transfers a substantial energy density to the sector with the smallest positive Higgs squared mass while remaining consistent with bounds on additional effective relativistic species. In this sector, all six quarks are much lighter than the corresponding QCD confinement scale, allowing for the possibility of a first-order chiral symmetry-breaking phase transition and an associated stochastic gravitational wave signal. We consider several scenarios characterizing the strongly-coupled phase transition dynamics and estimate the gravitational wave spectrum for each. Pulsar timing arrays (SKA), spaced-based interferometers (BBO, Ultimate-DECIGO,μAres, asteroid ranging), and astrometric measurements (THEIA) all have the potential to explore new regions of Nnaturalness parameter space, complementing probes from next generation cosmic microwave background radiation experiments.

Physics↗