Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “peak estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Estimation of the Attenuation Caused by Power Line Towers on an E1-HEMP Induced Excitation

In a transmission line, the coupling between a line and a tower above ground is evaluated when the excitation is an E1 high-altitude electromagnetic pulse (HEMP). The model focuses on capturing correctly the effect of the coupling on the peak of the HEMP induced current that propagates along the line. This assessment is necessary to accurately estimate the effect of the excitation on the systems and components of the power grid. This analysis is a step towards a quantitative evaluation of HEMP excitation on the power grid. The results obtained indicate that the effect can be significant, especially for lines heights of 20 meters or more.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Harnessing Photoelectrochemistry for Wastewater Nitrate Treatment Coupled with Resource Recovery

Wastewater is a misplaced resource well suited to recover nutrients, value-added chemicals, energy, and clean water. A photoelectrochemical device is proposed to transform wastewater nitrates to ammonia and nitrous oxide, coupled with water oxidation. Numerical models were developed to quantify the dependence of process efficiencies and nitrogen-removal rates on light absorber band gaps, electrocatalytic kinetic parameters, competing oxygen reduction and hydrogen evolution reactions, and the reacting nitrate species concentrations that affect the mass-transfer limited current densities. With a single light-absorber and state-of-the-art catalysts, optimal solar-to-chemical efficiencies of 7% and 10% and nitrogen-removal rates of 260 and 395 gN m -2 day -1 are predicted for nitrate reduction to ammonia and nitrous oxide, respectively. The influence of competing reactions on the performance depends on the nitrate concentration and band gap of the light absorber modeled. Oxygen reduction is more dominant than hydrogen evolution to compete with the nitrate reduction reaction, but it is mass-transfer limited. Even with kinetic parameters that enhanced the driving forces for the competing reactions, the performance is only minimally affected by these reactions for optimally selected band gaps and nitrate concentrations larger than 100 mM. Here, theoretically predicted peak nitrogen removal rates and specific energy intensities are competitive with reported estimates for electrochemical and Sharon-Anammox processes for ammonia recovery and nitrogen removal, respectively. This result, together with the added benefit of harnessing sunlight to produce value-added products, indicates promise in the photoelectrochemical approach as a tertiary pathway to recover nutrients and energy from wastewater nitrates.

25 ENERGY STORAGE↗
DOE OSTI2023

Paramagnon dispersion and damping in doped Na x Ca 2 – x CuO 2 Cl 2

Here, using resonant inelastic x-ray scattering, we measure the paramagnon dispersion and damping of undoped, antiferromagnetic Ca 2 CuO 2 Cl 2 as well as doped, superconducting Na x Ca 2–x CuO 2 Cl 2 . Our estimation of the spin-exchange parameter and width of the paramagnon peak at the zone boundary X=(0.5, 0) confirms that no simple relation can be drawn between these parameters and the critical temperature T c . Consistently with other cuprate compounds, we show that upon doping there is a slight softening at (0.25,0) but not at the zone boundary X. In combination with these measurements we perform calculations of the dynamical spin structure factor of the one-band Hubbard model using cluster dynamical mean-field theory. The calculations are in excellent agreement with the experiment in the undoped case, both in terms of energy position and width. While the increase in width is also captured upon doping, the dynamical spin structure factor shows a sizable softening at X, which provides insightful information on the length-scale of the spin fluctuations in doped cuprates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

OGLE-2018-BLG-1185b: A Low-mass Microlensing Planet Orbiting a Low-mass Dwarf

We report an analysis of the planetary microlensing event OGLE-2018-BLG-1185, which was observed by a large number of ground-based telescopes and by the Spitzer Space Telescope. The ground-based light curve indicates a low planet–host star mass ratio of q = (6.9 ± 0.2) × 10{sup −5}, which is near the peak of the wide-orbit exoplanet mass-ratio distribution. We estimate the host star and planet masses with a Bayesian analysis using the measured angular Einstein radius under the assumption that stars of all masses have an equal probability of hosting the planet. The flux variation observed by Spitzer is marginal, but still places a constraint on the microlens parallax. Imposing a conservative constraint that this flux variation should be Δf {sub Spz} < 4 instrumental flux units yields a host mass of M{sub host}=0.37{sub −0.21}{sup +0.35} M{sub ⊙} and a planet mass of m{sub p}=8.4{sub −4.7}{sup +7.9} M{sub ⊕}. A Bayesian analysis including the full parallax constraint from Spitzer suggests smaller host star and planet masses of M{sub host}=0.091{sub −0.018}{sup +0.064} M{sub ⊙} and m{sub p}=2.1{sub −0.4}{sup +1.5} M{sub ⊕}, respectively. Future high-resolution imaging observations with the Hubble Space Telescope or Extremely Large Telescope could distinguish between these two scenarios and help reveal the planetary system properties in more detail.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Energetic Electron Precipitation Driven by Electromagnetic Ion Cyclotron Waves from ELFIN’s Low Altitude Perspective

We review comprehensive observations of electromagnetic ion cyclotron (EMIC) wave-driven energetic electron precipitation using data collected by the energetic electron detector on the Electron Losses and Fields InvestigatioN (ELFIN) mission, two polar-orbiting low-altitude spinning CubeSats, measuring 50-5000 keV electrons with good pitch-angle and energy resolution. EMIC wave-driven precipitation exhibits a distinct signature in energy-spectrograms of the precipitating-to-trapped flux ratio: peaks at >0.5 MeV which are abrupt (bursty) (lasting ~17 s, or ΔL ~ 0.56) with significant substructure (occasionally down to sub-second timescale). We attribute the bursty nature of the precipitation to the spatial extent and structuredness of the wave field at the equator. Multiple ELFIN passes over the same MLT sector allow us to study the spatial and temporal evolution of the EMIC wave - electron interaction region. Case studies employing conjugate ground-based or equatorial observations of the EMIC waves reveal that the energy of moderate and strong precipitation at ELFIN approximately agrees with theoretical expectations for cyclotron resonant interactions in a cold plasma. Using multiple years of ELFIN data uniformly distributed in local time, we assemble a statistical database of ~50 events of strong EMIC wave-driven precipitation. Most reside at L ~ 5 – 7 at dusk, while a smaller subset exists at L ~ 8 – 12 at post-midnight. The energies of the peak-precipitation ratio and of the half-peak precipitation ratio (our proxy for the minimum resonance energy) exhibit an L-shell dependence in good agreement with theoretical estimates based on prior statistical observations of EMIC wave power spectra. The precipitation ratio’s spectral shape for the most intense events has an exponential falloff away from the peak (i.e., on either side of ~ 1.45 MeV). It too agrees well with quasi-linear diffusion theory based on prior statistics of wave spectra. It should be noted though that this diffusive treatment likely includes effects from nonlinear resonant interactions (especially at high energies) and nonresonant effects from sharp wave packet edges (at low energies). Sub-MeV electron precipitation observed concurrently with strong EMIC wave-driven >1 MeV precipitation has a spectral shape that is consistent with efficient pitch-angle scattering down to ~ 200-300 keV by much less intense higher frequency EMIC waves at dusk (where such waves are most frequent). At ~100 keV, whistler-mode chorus may be implicated in concurrent precipitation. These results confirm the critical role of EMIC waves in driving relativistic electron losses. Nonlinear effects may abound and require further investigation.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

OzDES Reverberation Mapping Programme: Mg ii lags and R − L relation

ABSTRACT The correlation between the broad line region radius and continuum luminosity (R–L relation) of active galactic nuclei (AGNs) is critical for single-epoch mass estimates of supermassive black holes (SMBHs). At z ∼ 1–2, where AGN activity peaks, the R–L relation is constrained by the reverberation mapping (RM) lags of the Mg ii line. We present 25 Mg ii lags from the Australian Dark Energy Survey RM project based on 6 yr of monitoring. We define quantitative criteria to select good lag measurements and verify their reliability with simulations based on both the damped random walk stochastic model and the rescaled, resampled versions of the observed light curves of local, well-measured AGN. Our sample significantly increases the number of Mg ii lags and extends the R–L relation to higher redshifts and luminosities. The relative iron line strength $\mathcal {R}_{\rm Fe}$ has little impact on the R–L relation. The best-fitting Mg iiR–L relation has a slope α = 0.39 ± 0.08 with an intrinsic scatter $\sigma _{\rm rl} = 0.15^{+0.03}_{-0.02}$ . The slope is consistent with previous measurements and shallower than the H β R–L relation. The intrinsic scatter of the new R–L relation is substantially smaller than previous studies and comparable to the intrinsic scatter of the H β R–L relation. Our new R–L relation will enable more precise single-epoch mass estimates and SMBH demographic studies at cosmic noon.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Estimating the Ultraviolet Emission of M Dwarfs with Exoplanets from Ca ii and Hα

M dwarf stars are excellent candidates around which to search for exoplanets, including temperate, Earth-sized planets. To evaluate the photochemistry of the planetary atmosphere, it is essential to characterize the UV spectral energy distribution of the planet’s host star. This wavelength regime is important because molecules in the planetary atmosphere such as oxygen and ozone have highly wavelength-dependent absorption cross sections that peak in the UV (900–3200 Å). We seek to provide a broadly applicable method of estimating the UV emission of an M dwarf, without direct UV data, by identifying a relationship between noncontemporaneous optical and UV observations. Our work uses the largest sample of M dwarf star far- and near-UV observations yet assembled. We evaluate three commonly observed optical chromospheric activity indices—Hα equivalent widths and log{sub 10} L Hα /L bol , and the Mount Wilson Ca ii H&K S and R HK ' indices—using optical spectra from the HARPS, UVES, and HIRES archives and new HIRES spectra. Archival and new Hubble Space Telescope COS and STIS spectra are used to measure line fluxes for the brightest chromospheric and transition region emission lines between 1200 and 2800 Å. Our results show a correlation between UV emission-line luminosity normalized to the stellar bolometric luminosity and Ca ii R HK ' with standard deviations of 0.31–0.61 dex (factors of ~2–4) about the best-fit lines. We also find correlations between normalized UV line luminosity and Hα log 10 L Hα /L bol and the S index. These relationships allow one to estimate the average UV emission from M0 to M9 dwarfs when UV data are not available.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Thermal energy mitigation and toroidal peaking effects in JET disruptions

Previous investigations on JET suggest half or less of plasma stored thermal energy W th is radiated (f rad,th ≲ 0.5) using either massive gas injection (MGI) or shattered pellet injection (SPI) disruption mitigation. We investigate whether the apparent incomplete f rad,th is explained by radiation peaking near the injection plume. High toroidal peaking throughout the pre-thermal quench is found in argon–deuterium MGI on JET, with typically >3× higher radiation near the injector than toroidally distant. Previously unexplained toroidal bolometry measurements in neon–deuterium SPI are reproduced with similar peaking using the Emis3D radiation analysis code. These observations align with results from Alcator C-Mod and KSTAR. This peaking is not captured by previous JET studies that found poor thermal mitigation. Two sets of neon–deuterium SPI and two sets of argon–deuterium MGI are analyzed using Emis3D. In SPI, f rad,th rises from no-plume estimates of 0.31 and 0.66 to lower bounds of 0.84 and 0.92, respectively, and f rad,th ∼ 1 is possible. In MGI, the toroidal spread of the peaking feature is poorly constrained. f rad,th up to 0.85 and 0.65 are possible using the largest possible spread, increasing from 0.42 and 0.28, although f rad,th ∼ 1 does not appear to be reached. Revised mitigation estimates on JET suggest a lower melt risk to the divertor in mitigated disruptions on ITER and SPARC than previously thought. However, peaking near injectors could increase flash melting risk on nearby plasma facing components.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

VST ATLAS galaxy cluster catalogue I: cluster detection and mass calibration

Taking advantage of ∼4700 deg 2 optical coverage of the Southern sky offered by the VST ATLAS survey, we construct a new catalogue of photometrically selected galaxy groups and clusters using the orca cluster detection algorithm. The catalogue contains ∼22 000 detections with N 200 > 10 and ∼9000 with N 200 > 20. We estimate the photometric redshifts of the clusters using machine learning and find the redshift distribution of the sample to extend to z ∼ 0.7, peaking at z ∼ 0.25. We calibrate the ATLAS cluster mass-richness scaling relation using masses from the MCXC, Planck, ACT DR5, and SDSS redMaPPer cluster samples. We estimate the ATLAS sample to be > 95 per cent complete and > 85 per cent pure at z < 0.35 and in the M 200m >1 x 10 14 h -1 M ⊙ mass range. At z < 0.35, we also find the ATLAS sample to be more complete than redMaPPer, recovering a ~ 40 per cent higher fraction of Abell clusters. This higher sample completeness places the amplitude of the z < 0.35 ATLAS cluster mass function closer to the predictions of a ΛCDM model with parameters based on the Planck CMB analyses, compared to the mass functions of the other cluster samples. However, strong tensions between the observed ATLAS mass functions and models remain. We shall present a detailed cosmological analysis of the ATLAS cluster mass functions in paper II. In the future, optical counterparts to X-ray-detected eROSITA clusters can be identified using the ATLAS sample. The catalogue is also well suited for auxiliary spectroscopic target selection in 4MOST. The ATLAS cluster catalogue is publicly available at http://astro.dur.ac.uk/cosmology/vstatlas/cluster_catalogue/.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Modeling Electric Vehicle Charging Load Using Origin-Destination Data

The accelerating adoption of electric vehicles (EVs) poses challenges to the power grid, necessitating precise representation of mobility patterns for effective infrastructure upgrades. Traditional simulation-based charging demand estimation faces limitations in generating trip chains reflective of actual travel patterns without complex network modeling. Hence, an innovative agent-based trip chain generation model is introduced to overcome these challenges. Drawing from the National Household Travel Survey (NHTS) and the NextGen NHTS origin-destination add-on data for Clarke County, Georgia, this study proposes a simulation method capturing both temporal and spatial mobility patterns without relying on extensive network topology data. The resulting trip chains predict EV charging load at the Census Block Group level, validated with a 1.03 correlation to actual trip counts, affirming their reflective accuracy. Two charging scenarios, residential-only and charging-everywhere, reveal distinct demand profiles. The charging-everywhere scenario aligns closely with the trip profile, while the residential-only scenario exhibits an afternoon peak slightly surpassing the former. This study contributes a data-driven charging demand estimation methodology, offering critical insights for grid resiliency planning amid the evolving landscape of EV adoption.

Pan, Melrose↗
DOE OSTI2021

Reflectivity and spectrum of relativistic flying plasma mirrors

Flying plasma mirrors induced by intense lasers via laser wake field acceleration scheme have been proposed as a promising way to generate few-cycle EUV or x-ray lasers. In addition, if such a relativistic plasma mirror can accelerate, then it would serve as an analog black hole to investigate the information loss paradox associated with the black hole Hawking evaporation. Among these applications, the reflectivity, which is usually frequency-dependent, would affect the outgoing photon spectrum and, therefore, impact on the analysis of the physics under investigation. In this paper, these two issues are investigated analytically and numerically with one-dimensional particle-in-cell simulations. Based on our simulation results, we propose a new model that provides a better estimate of the reflectivity than those studied previously. Moreover, we found that the peak frequency of the reflected spectrum of a Gaussian incident wave deviates from the expected value, 4γ 2 ω, due to the dependence of reflectivity on the frequency of the incident wave.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

OzDES Reverberation Mapping Programme: the first Mg ii lags from 5 yr of monitoring

ABSTRACT Reverberation mapping is a robust method to measure the masses of supermassive black holes outside of the local Universe. Measurements of the radius–luminosity (R−L) relation using the Mg ii emission line are critical for determining these masses near the peak of quasar activity at z ≈ 1−2, and for calibrating secondary mass estimators based on Mg ii that can be applied to large samples with only single-epoch spectroscopy. We present the first nine Mg ii lags from our 5-yr Australian Dark Energy Survey reverberation mapping programme, which substantially improves the number and quality of Mg ii lag measurements. As the Mg ii feature is somewhat blended with iron emission, we model and subtract both the continuum and iron contamination from the multiepoch spectra before analysing the Mg ii line. We also develop a new method of quantifying correlated spectroscopic calibration errors based on our numerous, contemporaneous observations of F-stars. The lag measurements for seven of our nine sources are consistent with both the H β and Mg ii R−L relations reported by previous studies. Our simulations verify the lag reliability of our nine measurements, and we estimate that the median false positive rate of the lag measurements is $4{{\ \rm per\ cent}}$.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

The Diurnal Dynamics of Gross Primary Productivity Using Observations From the Advanced Baseline Imager on the Geostationary Operational Environmental Satellite‐R Series at an Oak Savanna Ecosystem

Gross primary productivity (GPP) is the largest flux in the global carbon cycle and satellite-based GPP estimates have long been used to study the trends and interannual variability of GPP. With recent updates to geostationary satellites, we can now explore the diurnal variability of GPP at a comparable spatial resolution to polar-orbiting satellites and at temporal frequencies comparable to eddy covariance (EC) tower sites. We used observations from the Advanced Baseline Imager on the Geostationary Operational Environmental Satellite-R series (GOES-R) to test the ability of subdaily satellite data to capture the shifts in the diurnal course of GPP at an oak savanna EC site in California, USA that is subject to seasonal soil moisture declines. We compared three methods to estimate GPP: (a) a light-use efficiency model, (b) a linear relationship between the product of near-infrared reflectance of vegetation and photosynthetically active radiation (LIN-NIR v P) and EC tower GPP, and (c) a light response curve (LRC-NIR v P) between NIR v P and EC GPP. The LRC-NIR v P achieved the lowest mean absolute error for winter (2 µmol CO 2 m –2 s –1 ), spring (2.51 µmol CO 2 m –2 s –1 ), summer (1.43 µmol CO 2 m –2 s –1 ), and fall (1.35 µmol CO 2 m –2 s –1 ). The ecosystem experienced the largest shift in daily peak GPP in relation to the peak of incoming solar radiation toward the morning hours during the dry summers. The LRC-NIRvP and the light-use efficiency model were in agreement with these patterns of a shift in peak daily GPP toward the morning hours during summer. Our results can help develop diurnal estimates of GPP from geostationary satellites that are sensitive to fluctuating environmental conditions during the day.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

The effectiveness of D 2 pellet and gas injection in reducing intra-ELM tungsten erosion and heat flux in the DIII-D small angle slot divertor

Edge localized modes (ELMs) in H-mode plasmas can melt and erode plasma-facing components (PFCs) and lead to impurities in the core, reducing confinement. This study analyzes the use of D 2 pellet and gas injection for ELM mitigation on the DIII-D tokamak during the 2022 Small Angle Slot V-shaped Tungsten (W) (SAS-VW) divertor campaign, reducing W erosion and heat flux during ELMs. D α (656 nm) and WI (400.9 nm) filterscopes and Langmuir probes provide photon emission and electron density/temperature to estimate W atom erosion using the S/XB method, while surface eroding thermocouples measured ELM peak heat flux at the outer strike point (OSP). Thomson Scattering measurements of pedestal T e and n e provided input to predict W divertor erosion and heat flux during ELMs via the Free-Streaming plus Recycling Model (FSRM). While a greater D 2 mass injection rate decreased the ELM peak heat flux, the impact on W erosion was not monotonic. The average ‘large’ intra-ELM W erosion was lower for plasma shots with D 2 mass injection compared to the plasma shots without any D 2 mass injection in the SAS-VW divertor. However, plasma shots did not see significant changes in ‘large’ intra-ELM W divertor erosion as the D 2 mass injection rate increased. On average, the FSRM overestimated SAS-VW experimental intra-ELM W erosion by a factor of 6.9, but the overestimation is reduced to a factor of 3.6 with the implication of C deposition effects. Generally, experimentally measured and predicted quantities were worse for plasma shots with a lower D 2 mass injection rate and corresponding higher plasma carbon (C) impurity percentage (f C ). The discrepancies are postulated to be due to C/W material mixing, for which a simple analytic mixed-material model is presented. These results highlight the importance of incorporating and improving the robustness of a mixed-material layer model in the analysis of PFC erosion on present and future tokamak devices.

Carbon (C)↗
DOE OSTI2025

Electronic structures and pseudogap nature of the strongly correlated Kondo semimetals and insulators CeNiSn and CeRhX(X=As, Sb)

Employing temperature (T)-dependent angle-resolved photoemission spectroscopy (ARPES) near the Ce 4d absorption edge, we have investigated the electronic structures of the strongly correlated Kondo insulators (KIs) and/or Kondo semimetals of CeNiSn and CeRhX (X=As, Sb), which also belong to potential topological KIs (TKIs). Good agreement is found between the Fermi surfaces (FSs) measured at the Ce 4d→4f on resonance and those calculated and unfolded into the Ce-only Brillouin zone, supporting the crucial Ce 4f contribution to the Fermi-edge states in them. While the FSs of CeRhSb and CeNiSn are similar to each other, they are quite different from those of CeRhAs, which is understood to originate from the semimetallic Kondo ground states of CeNiSn and CeRhSb in contrast to the insulating Kondo ground state of CeRhAs. T-dependent ARPES demonstrates the existence of the Kondo resonance above the Fermi level (EF) and its T-driven decoherence in CeNiSn and CeRhSb, and the existence of the Ce 4f Kondo-like peak well below EF with a pseudogap in CeRhAs. With increasing T, the tail of the Kondo resonance in CeNiSn and CeRhSb loses its coherence, whereas the Ce 4f Kondo-like peak in CeRhAs persists up to T≥200 K. The Kondo temperatures (TKs) are estimated via the analysis of T-dependent ARPES, yielding TK≈80 K (CeNiSn), TK≈180 K (CeRhSb), and TK≫200 K (CeRhAs). High-resolution, low-T ARPES confirms the Kondo resonance just above EF in CeNiSn and CeRhSb Kondo semimetals and the KI ground state of CeRhAs with a pseudogap of Δ≈30 meV, demonstrating the importance of the coherent Kondo states in determining their potential topological properties. The differences in the T-dependent ARPES of CeNiSn and CeRhSb suggest the weaker f-c hybridization in CeNiSn than in CeRhSb (c: conduction electron), which is likely due to the more localized Ni 3d orbitals than the delocalized Rh 4d orbitals. The differences between the T-dependent ARPES of CeNiSn/CeRhSb Kondo semimetals and those of CeRhAs Kondo insulator are likely due to the smaller volume of CeRhAs than those of CeNiSn/CeRhSb.

Kang, J-S↗
DOE OSTI2022

Hydrogen Plus Other Alternative Fuels Risk Assessment Models (HyRAM+) Version 4.1 Technical Reference Manual

The HyRAM+ software toolkit provides a basis for conducting quantitative risk assessment and consequence modeling for hydrogen, methane, and propane systems. HyRAM+ is designed to facilitate the use of state-of-the-art models to conduct robust, repeatable assessments of safety, hazards, and risk. HyRAM+ integrates deterministic and probabilistic models for quantifying accident scenarios, predicting physical effects, characterizing hazards (thermal effects from jet fires, overpressure effects from delayed ignition), and assessing impacts on people. HyRAM+ is developed at Sandia National Laboratories to support the development and revision of national and international codes and standards, and to provide developed models in a publicly-accessible toolkit usable by all stakeholders. This document provides a description of the methodology and models contained in HyRAM+ version 4.1. The two most significant changes for HyRAM+ version 4.1 from HyRAM+ version 4.0 are direct incorporation of unconfined overpressure into the QRA calculations and modification of the models for cryogenic liquid flow through an orifice. In QRA mode, the user no longer needs to input peak overpressure and impulse values that were calculated separately; rather, the unconfined overpressure is estimated for the given system inputs, leak size, and occupant location. The orifice flow model now solves for the maximum mass flux through the orifice at constant entropy while conserving energy, which does not require a direct speed of sound calculation. This does not affect the mass flow for all-gaseous releases; the method results in the same speed of sound for choked flow. However, this method does result in a higher (and more realistic) mass flow rate for a given leak size for liquid releases than was previously calculated.

08 HYDROGEN↗
DOE OSTI2023

A verification study of fatigue-based methods in API RP 1183 for estimating fatigue life of pipeline dents

Pipeline dents are mechanical damage caused by a third party in buried pipelines during construction or maintenance repair. Dents are recognized as a leading cause of pipeline failures for both liquid and gas transmission lines, and their assessment and management are critical to pipeline integrity. To meet the industry need, American Institute of Petroleum (API) in 2020 published a recommended practice (RP) 1183 – Assessment and Management of Pipeline Dents. This API code provides the pipeline industry “standard methods” for evaluating severity and fatigue life of pipeline dents with a single peak. This paper performed an initial verification study of fatigue-based methods prescribed in API RP 1183 for estimating fatigue life of pipeline dents. A brief review was first given to the dent fatigue-based methods, including three dent screening methods for estimating dent fatigue life in Sections 7.4.1, 7.4.2, and 7.4.3 of API 1183 and one dent assessment method for predicting fatigue life in Section 8.3.4. In order to verify these fatigue life prediction methods, a set of “standard examples” of dents provided in Annexes A.1 to A.5 of API RP 1183 were utilized in this study to calculate fatigue life, to determine restraint condition, and to evaluate both screening and assessment methods for single-peak dents. Through detailed calculations and comparisons, this study confirmed some specifications of API RP 1183, but also found some self-inconsistences and errors existing in this new API code. Furthermore, this includes the self-inconsistences between three screening methods and the self-inconsistence between the screening and assessment methods. On this basis, recommendations were made on how the operators should use API RP 1183, and what actions API should take to improve this code.

42 ENGINEERING↗
DOE OSTI2021

Model predictive combustion control of a Gasoline Compression Ignition engine

Gasoline Compression Ignition is a novel combustion concept that derives its superiority from the high compression ratio of a compression ignition engine as well as the properties of gasoline fuel, such as longer ignition delay and higher volatility compared to diesel. Here, this combustion concept was experimentally tested on a 12.4L Class 8 truck engine. Based on these experimental data, prior efforts by the authors focused on the development of an engine model for a heavy-duty engine operating on a low-reactivity fuel. This engine model was leveraged within this study to investigate a combustion control strategy at different engine conditions and injection methods and was augmented to incorporate cycle-to-cycle combustion variations. State estimation is performed by means of a Kalman filter which feeds into a model predictive controller. The model predictive controller chooses control actions based on a predefined cost function under consideration of bounds reflecting physical constraints. The engine model was utilized to establish a state-space model that serves the Kalman filter and model predictive controller for estimation and prediction. A comparative study investigating control actions and engine behavior was performed with and without limiting in-cylinder peak pressure as well as combustion noise, which is of particular interest for early pilot injection strategies. In addition, the proposed control architecture was investigated at two different levels of cycle-to-cycle variations and compared to the performance of a control structure with input disturbance rejection. For increased cycle-to-cycle variations, disturbance estimation reduces state fluctuations and control effort. In general, this investigation highlights control aspects specific to a compression-ignited combustion regime with low-reactivity fuel. The control algorithm is able to maintain the desired references for brake mean effective pressure and combustion phasing while controlling peak in-cylinder pressure and combustion noise.

42 ENGINEERING↗