Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pattern classification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

TRMM Precipitation Radar Reflectivity Profiles Compared to High-Resolution Airborne and Ground-Based Radar Measurements

In this paper, TRMM (Tropical Rainfall Measuring Mission Satellite) Precipitation Radar (PR) products are evaluated by means of simultaneous comparisons with data from the high-altitude ER-2 Doppler Radar (EDOP), as well as ground-based radars. The comparison is aimed primarily at the vertical reflectivity structure, which is of key importance in TRMM rain type classification and latent heating estimation. The radars used in this study have considerably different viewing geometries and resolutions, demanding non-trivial mapping procedures in common earth-relative coordinates. Mapped vertical cross sections and mean profiles of reflectivity from the PR, EDOP, and ground-based radars are compared for six cases. These cases cover a stratiform frontal rainband, convective cells of various sizes and stages, and a hurricane. For precipitating systems that are large relative to the PR footprint size, PR reflectivity profiles compare very well to high-resolution measurements thresholded to the PR minimum reflectivity, and derived variables such as bright band height and rain types are accurate, even at high PR incidence angles. It was found that for, the PR reflectivity of convective cells small relative to the PR footprint is weaker than in reality. Some of these differences can be explained by non-uniform beam filling. For other cases where strong reflectivity gradients occur within a PR footprint, the reflectivity distribution is spread out due to filtering by the PR antenna illumination pattern. In these cases, rain type classification may err and be biased towards the stratiform type, and the average reflectivity tends to be underestimated. The limited sensitivity of the PR implies that the upper regions of precipitation systems remain undetected and that the PR storm top height estimate is unreliable, usually underestimating the actual storm top height. This applies to all cases but the discrepancy is larger for smaller cells where limited sensitivity is compounded by incomplete beam filling. Users of level three TRMM PR products should be aware of this scale dependency.

Heymsfield, G. M.↗

Synoptic cryosphere-atmosphere interactions in the Northern Hemisphere from DMSP image analysis

A climatology of Northern Hemisphere cyclonic cloud vortices is developed from high-resolution Defense Meteorological Satellite Program (DMSP) infrared imagery for mid-season months. The technique which is described involves pattern recognition using a detailed vortex classification system. Variations in hemispheric frequencies of successive vortex types are dominantly seasonal rather than latitudinal and imply a close association with surface (mainly cryosphere) variations. More extensive sea ice or snow cover in April and January is associated with increased cyclogenesis, indicating enhanced surface-atmosphere feedback. A significant relationship exists between cloud-vortex variations and the sea ice boundary, but not with the continental snowline.

Carleton, A. M.↗

Optimizing Input/Output Using Adaptive File System Policies

Parallel input/output characterization studies and experiments with flexible resource management algorithms indicate that adaptivity is crucial to file system performance. In this paper we propose an automatic technique for selecting and refining file system policies based on application access patterns and execution environment. An automatic classification framework allows the file system to select appropriate caching and pre-fetching policies, while performance sensors provide feedback used to tune policy parameters for specific system environments. To illustrate the potential performance improvements possible using adaptive file system policies, we present results from experiments involving classification-based and performance-based steering.

Madhyastha, Tara M.↗

LANDSAT data from agricultural sites: Crop signature analysis

The LANDSAT multispectral scanner (MSS) data were analyzed with a view toward classification to identify wheat. The notion of spectral signature of a crop, a commonly used basis for classification, was found to be inadequate. Data analysis has revealed that the MSS data from agricultural sites were essentially two dimensional, and that the data from different sites and different acquisition lay on parallel planes in the four dimensional feature space. These results were exploited to gain new insight into the data and to develop alternate models for classification. In particular, it was found that the temporal pattern of change in the spectral response of a crop constitutes its signature and provides a basis for crop classification.

Misra, P. N.↗

Decision Boundary Feature Extraction for Nonparametric Classification

Feature extraction has long been an important topic in pattern recognition. Although many authors have studied feature extraction for parametric classifiers, relatively few feature extraction algorithms are available for nonparametric classifiers. A new feature extraction algorithm based on decision boundaries for nonparametric classifiers is proposed. It is noted that feature extraction for pattern recognition is equivalent to retaining 'discriminantly informative features' and a discriminantly informative feature is related to the decision boundary. Since nonparametric classifiers do not define decision boundaries in analytic form, the decision boundary and normal vectors must be estimated numerically. A procedure to extract discriminantly informative features based on a decision boundary for non-parametric classification is proposed. Experiments show that the proposed algorithm finds effective features for the nonparametric classifier with Parzen density estimation.

Lee, Chulhee↗

Digital and optical shape representation and pattern recognition; Proceedings of the Meeting, Orlando, FL, Apr. 4-6, 1988

The present conference discusses topics in pattern-recognition correlator architectures, digital stereo systems, geometric image transformations and their applications, topics in pattern recognition, filter algorithms, object detection and classification, shape representation techniques, and model-based object recognition methods. Attention is given to edge-enhancement preprocessing using liquid crystal TVs, massively-parallel optical data base management, three-dimensional sensing with polar exponential sensor arrays, the optical processing of imaging spectrometer data, hybrid associative memories and metric data models, the representation of shape primitives in neural networks, and the Monte Carlo estimation of moment invariants for pattern recognition.

Juday, Richard D.↗

Landsat data from agricultural sites - Crop signature analysis

The Landsat multispectral scanner (MSS) data have been analyzed with a view toward classification to identify wheat. The notion of spectral signature of a crop, a commonly used basis for classification, has been found to be inadequate. Data analysis has revealed that the MSS data from agricultural sites are essentially two dimensional, and that the data from different sites and different acquisitions lie on parallel planes in the four-dimensional feature space. These results have been exploited to gain new insight into the data and to develop alternate models for classification. In particular, it has been found that the temporal pattern of change in the spectral response of a crop constitutes its signature and provides a basis for crop classification.

Misra, P. N.↗

Remote sensing in Iowa agriculture

The author has identified the following significant results. After receiving the ERTS-1 imagery, three methods of analysis of this imagery have been used. Observations noted are as follows: (1) Use of color additive and density slicing-color coding appears potentially useful for crop identification and automatic classification in Iowa for this time frame. The influence of soil association differences on the spectral response of the imagery will probably have to be taken into account for any automatic crop identification procedure to be successful. Small fields and the diversity of Iowa's cropping patterns also will cause significant problems for crop classifications. (2) The presence of high clouds and associated hazy atmospheric conditions markedly reduces the resolution of the ERTS-1 imagery. (3) Utilization of filtered 2 1/2 inch projectors is quite difficult because of multiple image registration problems. This procedure does, however, allow the interpreter to achieve image enlargement and the enhancement of response differences using two image projections.

Mahlstede, J. P.↗

Advances in Hyperspectral Image Classification Methods for Vegetation and Agricultural Cropland Studies

Hyperspectral data are becoming more widely available via sensors on airborne and unmanned aerial vehicle (UAV) platforms, as well as proximal platforms. While space-based hyperspectral data continue to be limited in availability, multiple spaceborne Earth-observing missions on traditional platforms are scheduled for launch, and companies are experimenting with small satellites for constellations to observe the Earth, as well as for planetary missions. Land cover mapping via classification is one of the most important applications of hyperspectral remote sensing and will increase in significance as time series of imagery are more readily available. However, while the narrow bands of hyperspectral data provide new opportunities for chemistry-based modeling and mapping, challenges remain. Hyperspectral data are high dimensional, and many bands are highly correlated or irrelevant for a given classification problem. For supervised classification methods, the quantity of training data is typically limited relative to the dimension of the input space. The resulting Hughes phenomenon, often referred to as the curse of dimensionality, increases potential for unstable parameter estimates, overfitting, and poor generalization of classifiers. This is particularly problematic for parametric approaches such as Gaussian maximum likelihood–based classifiers that have been the backbone of pixel-based multispectral classification methods. This issue has motivated investigation of alternatives, including regularization of the class covariance matrices, ensembles of weak classifiers, development of feature selection and extraction methods, adoption of nonparametric classifiers, and exploration of methods to exploit unlabeled samples via semi-supervised and active learning. Data sets are also quite large, motivating computationally efficient algorithms and implementations. This chapter provides an overview of the recent advances in classification methods for mapping vegetation using hyperspectral data. Three data sets that are used in the hyperspectral classification literature (e.g., Botswana Hyperion satellite data and AVIRIS airborne data over both Kennedy Space Center and Indian Pines) are described in Section 3.2 and used to illustrate methods described in the chapter. An additional high-resolution hyperspectral data set acquired by a SpecTIR sensor on an airborne platform over the Indian Pines area is included to exemplify the use of new deep learning approaches, and a multiplatform example of airborne hyperspectral data is provided to demonstrate transfer learning in hyperspectral image classification. Classical approaches for supervised and unsupervised feature selection and extraction are reviewed in Section 3.3. In particular, nonlinearities exhibited in hyperspectral imagery have motivated development of nonlinear feature extraction methods in manifold learning, which are outlined in Section 3.3.1.4. Spatial context is also important in classification of both natural vegetation with complex textural patterns and large agricultural fields with significant local variability within fields. Approaches to exploit spatial features at both the pixel level (e.g., co-occurrence–based texture and extended morphological attribute profiles [EMAPs]) and integration of segmentation approaches (e.g., HSeg) are discussed in this context in Section 3.3.2. Recently, classification methods that leverage nonparametric methods originating in the machine learning community have grown in popularity. An overview of both widely used and newly emerging approaches, including support vector machines (SVMs), Gaussian mixture models, and deep learning based on convolutional neural networks is provided in Section 3.4. Strategies to exploit unlabeled samples, including active learning and metric learning, which combine feature extraction and augmentation of the pool of training samples in an active learning framework, are outlined in Section 3.5. Integration of image segmentation with classification to accommodate spatial coherence typically observed in vegetation is also explored, including as an integrated active learning system. Exploitation of multisensor strategies for augmenting the pool of training samples is investigated via a transfer learning framework in Section 3.5.1.2. Finally, we look to the future, considering opportunities soon to be provided by new paradigms, as hyperspectral sensing is becoming common at multiple scales from ground-based and airborne autonomous vehicles to manned aircraft and space-based platforms.

Pasolli, Edoardo↗

Low-cost data analysis systems for processing multispectral scanner data

A research-oriented data analysis system was developed which is used for evaluating complex remote sensor systems and for development of techniques for application of remotely sensed data. Some modular hardware components were developed which may be added to one's existing facilities to establish a low-cost data analysis system for processing multispectral scanner data. Software modules which are compatible with small general purpose digital computers process and analyze remote sensor data, and convert it to information needed by users. The software modules are written in FORTRAN IV language for ease of transfer to other computer systems. The basic hardware and software system requirements are defined for some low-cost data analysis systems consisting of an image display system, a small general purpose digital computer, and an output recording device. The hardware modules consist of: a LANDSAT MSS data reformatting program; a series of spectral pattern recognition programs required to generate surface classification maps and tabular information; programs to convert computer generated maps from image space to a geographically referenced base; programs to extract data and irregularly shaped areas and to produce thematic maps of the designated areas; and programs to tabulate acreages of selected classification categories. Some off-the-shelf, inexpensive digital image display systems are described.

Whitley, S. L.↗

Zonal velocity and texture in the Jovian atmosphere inferred from Voyager images

Smith et al. (1970) have described Jupiter's changing appearance at resolutions down to 10 km over intervals as small as 1 h. Examples of small-scale convection, rapid variations of features, and complex interactions of closed vortices were given. In the present paper, these results are extended to include measurements of the latitudinal profile of zonal (eastward) velocity, from which the absolute vorticity gradient is estimated. Also, a classification scheme based on texture (i.e., the patterns of small features visible at resolutions of 100 km or better) is proposed.

Ingersoll, A. P.↗

Analysis of Martian terrains using optical power spectra

Planetary geological studies are almost entirely based on the analysis of orbital imagery. In the case of Mars, optical power spectra are providing the photogeologist with an additional aid in his task of classification and characterization of diverse terrains. Statistical pattern recognition techniques using optical power spectral data may be especially valuable in subdividing terrain units with characteristics that are only subtly different and in correlation of isolated patches of similar materials that are widely separated on the planet's surface.

Wolfe, R. W.↗

Pattern recognition characterizations of micromechanical and morphological materials states via analytical quantitative ultrasonics

One potential approach to the quantitative acquisition of discriminatory information that can isolate a single structural state is pattern recognition. The pattern recognition characterizations of micromechanical and morphological materials states via analytical quantiative ultrasonics are outlined. The concepts, terminology, and techniques of statistical pattern recognition are reviewed. Feature extraction and classification and states of the structure can be determined via a program of ultrasonic data generation.

Williams, J. H., Jr.↗

A preliminary computer pattern analysis of satellite images of mature extratropical cyclones

This study has applied computerized pattern analysis techniques to the location and classification of features of several mature extratropical cyclones that were depicted in GOES satellite images. These features include the location of the center of the cyclone vortex core and the location of the associated occluded front. The cyclone type was classified in accord with the scheme of Troup and Streten. The present analysis was implemented on a personal computer; results were obtained within approximately one or two minutes without the intervention of an analyst.

Burfeind, Craig R.↗

Best Practices for the Application of Functional Near Infrared Spectroscopy to Operator State Sensing

Functional Near Infrared Spectroscopy (fNIRS) is an emerging neuronal measurement technique with many advantages for application in operational and training contexts. Instrumentation and protocol improvements, however, are required to obtain useful signals and produce expeditiously self-applicable, comfortable and unobtrusive headgear. Approaches for improving the validity and reliability of fNIRS data for the purpose of sensing the mental state of commercial aircraft operators are identified, and an exemplary system design for attentional state monitoring is outlined. Intelligent flight decks of the future can be responsive to state changes to optimally support human performance. Thus, the identification of cognitive performance decrement, such as lapses in operator attention, may be used to predict and avoid error-prone states. We propose that attentional performance may be monitored with fNIRS through the quantification of hemodynamic activations in cortical regions which are part of functionally-connected attention and resting state networks. Activations in these regions have been shown to correlate with behavioral performance and task engagement. These regions lie beneath superficial tissue in head regions beyond the forehead. Headgear development is key to reliably and robustly accessing locations beyond the hair line to measure functionally-connected networks across the whole head. Human subject trials using both fNIRS and functional Magnetic Resonance Imaging (fMRI) will be used to test this system. Data processing employs Support Vector Machines for state classification based on the fNIRS signals. If accurate state classification is achieved based on sensed activation patterns, fNIRS will be shown to be useful for monitoring attentional performance.

Harrivel, Angela R.↗

Burke County wheat feasibility study

A feasibility study was conducted to determine whether wheat could be distinguished from other small grain crops in a selected spring wheat growing area in Burke County, North Dakota using a maximum likelihood classification program and ERTS 1 multispectral band scanner data. ERTS 1 data scenes were selected from passes made on June 5, 1973 and June 23, 1973. The Univac 1108 computer and the LARSYS pattern recognition software package were used in performing the classification. Results of the analysis are provided.

Kunkel, W. A.↗

Digital processing of satellite imagery application to jungle areas of Peru

The author has identified the following significant results. The use of clustering methods permits the development of relatively fast classification algorithms that could be implemented in an inexpensive computer system with limited amount of memory. Analysis of CCTs using these techniques can provide a great deal of detail permitting the use of the maximum resolution of LANDSAT imagery. Potential cases were detected in which the use of other techniques for classification using a Gaussian approximation for the distribution functions can be used with advantage. For jungle areas, channels 5 and 7 can provide enough information to delineate drainage patterns, swamp and wet areas, and make a reasonable broad classification of forest types.

Pomalaza, J. C.↗