Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oxygen defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

The Dependence of Atomic Oxygen Undercutting of Protected Polyimide Kapton(tm) H upon Defect Size

Understanding the behavior of polymeric materials when exposed to the low-Earth-orbit (LEO) environment is important in predicting performance characteristics such as in-space durability. Atomic oxygen (AO) present in LEO is known to be the principal agent in causing undercutting erosion of SiO(x) protected polyimide Kapton(R) H film, which serves as a mechanically stable blanket material in solar arrays. The rate of undercutting is dependent on the rate of arrival, directionality and energy of the AO with respect to the film surface. The erosion rate also depends on the distribution of the size of defects existing in the protective coating. This paper presents results of experimental ground testing using low energy, isotropic AO flux together with numerical modeling to determine the dependence of undercutting erosion upon defect size.

Snyder, Aaron↗
DOE OSTI2022

AlScO 3 perovskite—An ~8 eV bandgap oxide predicted to exhibit low small hole polaron ionization energies and p -type conductivity at elevated temperatures

Here, we investigate electronic structure and dopability of an ultrawide bandgap (UWBG) AlScO 3 perovskite, a known high-pressure and long-lived metastable oxide. From first-principles electronic structure calculations, HSE06(+G 0 W 0 ), we find this material to exhibit an indirect bandgap of around 8.0 eV. Defect calculations point to cation and oxygen vacancies as the dominant intrinsic point defects limiting extrinsic doping. While acceptor behaving Al and Sc vacancies prevent n-type doping, oxygen vacancies permit the Fermi energy to reach ~0.3 eV above the valence band maximum, rendering AlScO 3 p-type dopable. Furthermore, we find that both Mg and Zn could serve as extrinsic p-type dopants. Specifically, Mg is predicted to have achievable net acceptor concentrations of ~10 17 cm -3 with ionization energy of bound small hole polarons of ~0.49 eV and free ones below 0.1 eV. These values place AlScO 3 among the UWBG oxides with lowest bound small hole polaron ionization energies, which, as we find, is likely due to large ionic dielectric constant that correlates well with low hole polaron ionization energies across various UWBG oxides.

14 SOLAR ENERGY↗
DOE OSTI2025

Insights into oxygen diffusion in rare earth disilicate environmental barrier coatings

Environmental barrier coatings (EBC) are crucial for the use of SiC-based ceramic matrix composites in high-temperature combustion environments, yet knowledge of oxygen diffusion in these coatings is limited. This study investigates oxygen diffusion dynamics in the β-RE 2 Si 2 O 7 system to minimize oxygen penetration in rare earth disilicates. We analyze defect formation energy under varying oxygen conditions, identifying key diffusion mechanisms. In oxygen-rich environments, the most favorable neutral interstitial oxygen diffuses along the [110] direction. In oxygen-poor conditions, neutral oxygen vacancies rotate around Y and Si atoms, exhibiting a diffusivity of 6.59×10 −22 m 2 /s at 1500 K for β-Yb 2 Si 2 O 7 . Under intermediate oxygen levels, charged interstitial oxygen diffuses via concerted interstitialcy along the [001] direction with a diffusivity of 6.21×10 −17 m 2 /s. Additionally, alloying rare earth Y with Er and Yb increases diffusion barriers, contributing to improved EBC performance in extreme environments. The insights gained provides valuable guidance for designing robust coatings tailored to withstand extreme operational environments.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Defect-Promoted Ni-Based Layer Double Hydroxides with Enhanced Deprotonation Capability for Efficient Biomass Electrooxidation

Ni-based hydroxides are promising electrocatalysts for biomass oxidation reactions, supplanting the oxygen evolution reaction (OER) due to lower overpotentials while producing value-added chemicals. The identification and subsequent engineering of their catalytically active sites are essential to facilitate these anodic reactions. Herein, the proportional relationship between catalysts’ deprotonation propensity and Faradic efficiency of 5-hydroxymethylfurfural (5-HMF)-to-2,5 furandicarboxylic acid (FDCA, FEFDCA) is revealed by thorough density functional theory (DFT) simulations and atomic-scale characterizations, including in situ synchrotron diffraction and spectroscopy methods. The deprotonation capability of ultrathin layer-double hydroxides (UT-LDHs) is regulated by tuning the covalency of metal (M)-oxygen (O) motifs through defect site engineering and selection of M 3+ co-chemistry. NiMn UT-LDHs show an ultrahigh FE FDCA of 99% at 1.37 V versus reversible hydrogen electrode (RHE) and retain a high FE FDCA of 92.7% in the OER-operating window at 1.52 V, about 2× that of NiFe UT-LDHs (49.5%) at 1.52 V. Ni–O and Mn–O motifs function as dual active sites for HMF electrooxidation, where the continuous deprotonation of Mn–OH sites plays a dominant role in achieving high selectivity while suppressing OER at high potentials. The results showcase a universal concept of modulating competing anodic reactions in aqueous biomass electrolysis by electronically engineering the deprotonation behavior of metal hydroxides, anticipated to be translatable across various biomass substrates.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Defect–Concentration–Mediated T–Nb 2 O 5 Anodes for Durable and Fast–Charging Li–Ion Batteries

Metastable orthorhombic niobium pentoxide (T-Nb 2 O 5 ) is a promising anode to fulfill the requirements for high-rate Li-ion batteries (LIBs). Stoichiometric T-Nb 2 O 5 is plagued by low electric conductivity and particle pulverization after repeated charge/discharge processes. In this work, oxygen vacancies are implanted into T-Nb 2 O 5 particles via acid immersion of Nb 2 O 5 ·nH 2 O with the formation of Lewis acid sites. The multiple characterizations and simulations reveal the lengthening of Nb–O bonds, and the transformation from NbO 7 pentagonal bipyramids and NbO 6 tetragonal bipyramids in T-Nb 2 O 5–x . The enrichment of oxygen vacancies endows T-Nb 2 O 5–x with higher electric conductivity, better electrochemical kinetics, larger pseudocapacitive contribution. O-doped graphitic C 3 N 4 is creatively proposed as a trace oxygen pump to repair excessive oxygen vacancies, and it also serves as a sacrifice template for Nb 2 O 5–x growth to construct a porous and monolithic electrode network. Defect-modulated Nb 2 O 5–x displays extraordinary cycling stability (164 mAh g –1 at 5 C after 1100 cycles), high capacity retention (104 mAh g –1 ) at an ultrahigh rate (25 C), and large areal capacity (0.74 mAh cm –2 ) under high mass loading (4 mg cm –2 ). The practical prospect is proved by Nb 2 O 5–x /LiNi 0.8 Co 0.1 Mn 0.1 O 2 full cells with high average platform (2.12 V) and high specific capacity (229 mAh g –1 ). Finally, the oxygen-defect modulation strategy on oxide anodes provides an alternative solution to fast-charging and durable LIBs.

25 ENERGY STORAGE↗
DOE OSTI2026

Charged Defects in UO 2 Bulk and Surface: A First-Principles Study

Uranium dioxide (UO 2 ) is the primary fuel used in nuclear reactors. Under the extreme heat and radiation inside a reactor, this material inevitably develops defects in its crystal structure. To investigate the nature and behavior of these defects, DFT+U calculations were employed to investigate charged point defects in both bulk UO 2 and its most stable surface, the (111) plane. The formation of defects and their impact on the electronic structure were systematically examined. The results reveal that these defects introduce localized electronic states, alter magnetic behavior, and modify the structural properties. In general, such defects act as deep traps capable of capturing and retaining charge carriers. The stability of these defects depends strongly on the chemical environment and the position of the Fermi level. Surface defect calculations reveal that oxygen vacancies form more readily at the surface than in the bulk over a wide range of electron chemical potential, with subsurface oxygen vacancies being more stable than those in the top layer. Overall, the findings demonstrate how charged defects influence magnetism, transport, and stability in UO 2 , providing insights that may guide improvements in the safety and efficiency of nuclear fuel.

36 MATERIALS SCIENCE↗
DOE OSTI2024

CeO2 Nanoparticle Doping as a Probe of Active Site Speciation in the Catalytic Hydrolysis of Organophosphates

Organophosphate hydrolysis is important for degrading environmentally harmful compounds and recovering phosphate ions in biological molecules. CeO2 nanocrystals have been well-studied for dephosphorylation via hydrolysis owing to the accessible and tunable distribution of Ce3+ and Ce4+ ions. However, there remains uncertainty in the literature regarding which surface defect properties direct catalytic activity, such as the Ce3+/Ce4+ distribution, oxygen vacancies, faceting, and dopants, and to what degree they contribute to efficient hydrolysis. Trivalent (M3+) dopants serve as a tool for manipulating defects, including the concentration of Ce3+ and oxygen vacancies, thereby influencing the hydrolytic activity of CeO2. Herein, trivalent metal ions (M = Y3+, Cr3+, In3+, and Gd3+) were employed to modulate the active sites on the CeO2 nanocrystal surface, and the effects of each metal dopant on the cerium oxide active sites for organophosphate hydrolysis were investigated. M-doped CeO2 nanoparticles were synthesized via hydrothermal methods, followed by annealing to remove ligands and prime the nanocrystal surface for catalysis. Catalytic performance was evaluated using dimethyl-p¬-nitrophenyl phosphate (DMNP) as a model organophosphate substrate, with degradation monitored over time using UV-visible absorption spectroscopy. Powder X-ray diffraction (PXRD), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy revealed successful doping of CeO2 in all cases, albeit with distinctive characteristics demonstrating how M3+ dopants affect catalysis. We show that CeO2 exhibits high sensitivity to dopants that generate lattice strain, Ce3+ ions, and oxygen vacancy defects. Consequently, achieving high catalytic efficiency within CeO2 requires a balanced active site ensemble, wherein defects are maintained at optimal concentrations and distributions on the nanocrystal surface.

Miura-Stempel, Emily L.↗
DOE OSTI2024

Spin-Controllable Dynamics in Defect-Engineered Carbon Nanotubes as Single Photon Emitters: Data-Driven Modeling and Computations

Quantum technologies, such as quantum computing and sensing, require efficient single-photon emission (SPE) sources that operate at room temperature in telecom wavelengths. While several materials can serve as SPE sources, no single platform meets all the criteria for efficiency, ambient operation, and scalability. Single-walled carbon nanotubes (SWCNTs) with covalently attached molecules offer a promising solution. Their SPE can be easily tuned via modifications of the SWCNT's diameter, chirality, and bonded molecules, enabling emission across near-IR to telecom wavelengths at ambient conditions. However, to fully realize the potential of SWCNTs and unlock their quantum capabilities, a deeper understanding of how structural defects from molecular adducts affect their emission and competing photoexcited processes is essential. To address this gap in our knowledge, this project combined quantum chemistry calculations with data-driven methods of cheminformatics (QSAR) and machine learning (ML). The developed computational approaches have provided several design strategies for covalent functionalization of SWCNTs to improve their optical response. The collaboration with Los Alamos National Lab (LANL) enabled direct comparison of computational and experimental data, facilitating method validation. This partnership was enhanced through access to LANL's Center for Integrated Nanotechnologies (CINT) utilizing User Facility Program and summer internships, which provided three NDSU graduate students with hands-on experience at LANL. The outcomes of this project included (1) Advancing the current stage of computational methods in accurate modeling of non-adiabatic spin-dependent photoexcited dynamics and its applicability to nanosystems consisting of thousands of atoms, realized as open-access codes linked to existing DFT-based software; (2) Establishing the relationship between the structure of adducts and SWCNTs and intrinsic excitonic and spin properties of defect states for guiding novel synthetic strategies and experimental probes of chemically functionalized SWCNTs as near-IR emitting materials; (3) Generating virtual libraries of hypothetical functionalized SWCNTs for virtual screening of their chemical structures and optical properties, leveraging new functionalities of SWCNTs; (4) Offering a unique experience for NDSU graduate students that prepared them for future scientific careers related to materials modeling and big data processing. These results were summarized in 12 published journal papers and 3 recently submitted papers. One of a key finding is that the position of defect sites on the SWCNT surface primarily drives the emission redshift (up to 100 meV), while the polarity of the defect-inducing molecules has a much smaller effect (~10 meV). However, the electron-donating or withdrawing properties of a molecule influence selecting reactivity of defect sites. These insights important for optimizing synthetic protocols for desired emissions in SWCNTs. We also revealed that the interaction between two defects at various positions on the SWCNT enhances the redshift and optical activity of states, favoring strong near-IR emission. This suggests that manipulations in defect concentrations is a promising strategy for controlling efficient emission. Mostly important, the defect position was found controllable by the spin states of photoexcited intermediates: Excited aromatic molecules form ortho defects with SWCNTs at their singlet states in the presence of oxygen, while oxygen-free conditions favor para defects via the triplet-state mechanism. Additionally, a heat-activated [2+2] cycloaddition reaction facilitates divalent defect formation with fewer bonding positions that narrows emission bands. These groundbreaking findings have been experimentally validated and significantly advance our understanding of defect chemistry in SWCNTs. Using a novel encoding technique and 3D-MoRSE descriptors, we developed highly accurate ML/QSAR models to predict both the 3D structure and optical properties of SWCNTs with chemical defects. This model enabled the creation of a virtual library of 125,556 structures, providing new insights into the relationship between SWCNT-defect structure and emission.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

First-principles study of defects and doping limits in CaO

Calcium oxide (CaO) is a promising host for quantum defects because of its ultrawide bandgap and potential for long spin coherence times. Using hybrid functional calculations, we investigate the intrinsic point defects and how they limit Fermi-level positions and doping in CaO. We find calcium and oxygen vacancies to be the most common intrinsic defects, acting as compensating acceptors and donors, respectively. Oxygen interstitials are also prevailing under O-rich conditions and act as compensating donors. Due to compensation by these defects, O-poor conditions are required to dope CaO n-type, while O-rich conditions are required for p-type doping. We find that, at room temperature, intrinsic CaO can only achieve Fermi-level positions between 1.76 eV above the valence-band maximum (VBM) and 1.73 eV below the conduction-band minimum (CBM). If suitable shallow dopants are found, the allowed range of Fermi levels would increase to between VBM + 0.53 eV and CBM − 0.27 eV and is set by the compensating intrinsic defects. Additionally, we study hydrogen impurities, and show that hydrogen will not only limit p-type doping but can also act as shallow donor when substituting oxygen (HO defects).

Physics↗
DOE OSTI2021

Atomic-Scale Investigation of Oxidation at the Black Phosphorus Surface

Black phosphorus (BP) exhibits extraordinary electronic properties that are desirable for a wide variety of electronic and optoelectronic applications. However, applications of BP are hindered by its rapid degradation in ambient conditions. Despite significant advances that have been made in understanding the degradation mechanism, no consensus has yet been reached on how BP oxidation occurs at the atomic scale as experimental studies have been mostly restricted to averaged effects of degradation over a micron- to millimeter-sized region. Here, BP oxidation is investigated using scanning tunneling microscopy/spectroscopy (STM/S). Introducing O 2 gas to the BP surface in ultrahigh vacuum at a pressure of 10 –5 mbar for 1 min creates two new types of defects on the surface. We identify these defects as dangling atomic oxygen and phosphorus multivacancies using density functional theory simulations. In addition to the structural changes to the surface, the electronic structure is also drastically altered by the introduction of oxygen. The 300 meV band gap of BP is lifted due to dosing. This change in the electronic structure is reversible through STM tip manipulation. As a result, these are the first experimental results showing the atomic-scale oxidation of BP, an important step toward understanding the degradation process

2D materials↗
DOE OSTI2022

Oxygen and Proton Transport in Flooded Graphene Pores with N-Dopants and Defects

Reactant transport is an important consideration in the design of ideal electrode structures. For the oxygen reduction reaction catalyzed by Pt/C in proton exchange membrane fuel cell cathodes, O 2 and H + delivery to Pt surfaces and H 2 O transport away are required. Some Pt nanoparticles may only be accessible via micropores that are too small for ionomer molecules to enter, possibly requiring flooding for H + transport. Here, to test if these “buried” Pt particles can play a role in activity through this proposed transport mechanism, we have performed atomic-scale simulations based on reactive force field molecular dynamics with an emphasis on confinement below 20 Å. Diffusion coefficients as a function of the molar concentration and local environment have been evaluated in water domains confined in two-dimensional graphene nanochannels of various channel heights representing a morphological model for micropores in proton exchange fuel cell cathodes. Our study shows that local atomic-scale structures can strongly modify H + , O 2 , and H 2 O transport rates in flooded micropores less than 20 Å in size. We find that there is a critical crossover in diffusion behavior around the 20 Å spacing with larger pores having bulk-like diffusion properties and confinement below 20 Å monotonically decreases diffusion rates. As pore size decreases, we observe locally dispersed water regions that ultimately strand reactants from long-distance transport. These findings suggest that flooded micropores may in fact be viable transport pathways for relevant reactants and products if the pore walls on opposite sides remain separated by ≥10 Å separation. Furthermore, the confinement effect is so strong that N-doping and C-vacancy defects in the C pore wall have only a minimal impact on diffusion rates and their effects are counterintuitively more apparent at larger spacings. These findings provide valuable insight regarding cathode performance and the role “stranded” catalyst particles may play in fuel cell cathodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Elucidation of Ce/Zr ratio effects on the physical properties and catalytic performance of CuO x /Ce y Zr 1− y O 2 catalysts

Although cerium oxide (CeO 2 ) is widely used as a catalyst support, its limited defect sites and surface oxygen vacancy/mobility should be improved. The incorporation of zirconium (Zr) in the cerium (Ce) lattice is shown to increase the number of oxygen vacancies and improve catalytic activity. Using a fixed surface density (SD) of copper (∼2.3 Cu atoms per nm 2 ) as a surface species, the role of the support (Ce y Zr 1−y O 2 (y = 1.0, 0.9, 0.6, 0.5, and 0.0)) and defect site effects in the CO oxidation reaction was investigated. Spectroscopic (e.g., Raman, XRD, XPS) and microscopic (e.g., SEM-EDX, HR-TEM) characterization techniques were applied to evaluate the defect sites, crystallite size, lattice parameters, chemical composition, oxidation states of elements and microstructure of the catalysts. Here, the CO oxidation reaction with varied CO : O 2 ratios (1 : 5, 1 : 1, and 1 : 0.5 (stoichiometric)) was used as a model reaction to describe the relationship between the structure and the catalytic performance of each catalyst. Based on the characterization results of Ce y Zr 1−y O 2 materials, the addition of Zr causes physical and chemical changes to the overall material. The inclusion of Zr into the structure of CeO 2 decreased the overall lattice parameter of the catalyst and increased the number of defect sites. The prepared catalysts were able to reach complete CO conversion (∼100%) at low temperature conditions (<200 °C), each showing varied reaction activity. The difference in CO oxidation activity was then analyzed and related to the structure, wherein Cu loading, surface oxygen vacancies, reduction–oxidation ability, CuO x –support interaction and oxygen mobility in the catalyst were the crucial descriptors.

36 MATERIALS SCIENCE↗
NASA NTRS1995

Atomic oxygen interactions with protected organic materials on the Long Duration Exposure Facility (LDEF)

The Long Duration Exposure Facility (LDEF) has provided an excellent opportunity to understand the nature of directed atomic oxygen interactions with protected polymers and composites. Although there were relatively few samples of materials with protective coatings on their external surfaces on LDEF which were exposed to a high atomic oxygen fluence, analysis of such samples has enabled an examination of the shape of atomic oxygen undercut cavities at defect sites in the protective coatings. Samples of front-surface aluminized (Kapton) polyimide were inspected by scanning electron microscopy to identify and measure crack defects in the aluminum protective coatings. After chemical removal of the aluminum coating, measurements were also made of the width of the oxidized undercut cavities below the crack defects. The LDEF flight undercut cavity geometries were then compared with Monte Carlo computational model undercut cavity predictions. The comparison of the LDEF results and computational modeling indicates agreement in specific undercut cavity geometries for atomic oxygen reaction probabilities dependent upon the 0.68 to 3.0 power of the energy. However, no single energy dependency was adequate to replicate flight results over a variety of aluminum crack widths.

Banks, Bruce A.↗
DOE OSTI2023

Assessment of exchange-correlation functionals on oxygen vacancy formation energies of metal oxides

Oxygen vacancies are a common defect in oxides and play vital roles in many technological applications such as oxygen separation, catalytic reactors, solid oxide fuel cells, and solar thermochemical water splitting. The oxygen vacancy formation energy is directly related to the oxide reduction enthalpy and the vacancy concentration and, therefore, is a key quantity underlying these applications. The complexity of measuring oxygen vacancy formation energies experimentally suggests the utility of calculations based on density functional theory (DFT). However, the calculated results are strongly dependent on the exchange-correlation functionals and other parameters such as the Hubbard U . In this work, we compare the performance of the meta-GGA strongly constrained and appropriately normed (SCAN) functional and the commonly used semilocal generalized gradient approximation (GGA) functionals with experimental values of structural parameters, band gaps, magnetic structures, and oxygen vacancy formation energies for six representative oxides, i.e., CaMnO 3 , SrMnO 3 , LaMnO 3 , YMnO 3 , LaFeO 3 , and CeO 2 . Further, our results show that SCAN usually has better agreement with the experimental lattice constants and band gaps and larger magnetic moments than the commonly used GGA functionals. Although SCAN overestimates the oxygen vacancy formation energies of transition metal oxides and therefore requires unusually large Hubbard U values to reproduce the experimental reduction enthalpies, it does predict the correct oxygen vacancy formation energy of CeO 2 , which challenges the commonly used GGA and hybrid functionals. Our results underscore the challenges that exist in describing these complex oxides by DFT and may shed light on developing more accurate exchange-correlation functionals for oxygen vacancy formation energy calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Vacancy Mediated Electrooxidation of 5‐Hydroxymethyl Furfuryl Using Defect Engineered Layered Double Hydroxide Electrocatalysts

Abstract Electrochemical biomass oxidation coupled with hydrogen evolution offers a promising route to generate value‐added chemicals and clean energy. The complex adsorption behavior of 5‐hydroxymethyl furfural (HMF) and hydroxyl ions (OH − ) on the electrocatalyst surface during HMF electrooxidation reaction (HMFOR) necessitates an in‐depth understanding of active sites available for adsorption. Herein, oxygen vacancy (V O ) defects are introduced in NiFe layered double hydroxide (LDH) using Ce dopants to manipulate electronic structure. Synchrotron‐based HE‐XRD and XAS indicate negligible V O in La‐doped NiFe while Ce doping leads to V O defects due to flexible Ce redox (Ce 3+ ↔ Ce 4+ ). The V O ‐rich Ce‐NiFe exhibits higher Faradic efficiency of ≈90% to produce 2,5‐furan dicarboxylic acid (FDCA), far greater than ≈60% for NiFe V O in Ce‐NiFe act as alternative active sites for OH − adsorption, hence reducing adsorption competition for the same metal sites. DFT calculation results corroborate experimental findings by showcasing that the presence of V O in Ce‐NiFe manipulates the adsorption energies and facilitates the chemical adsorption OH − in V O to improve HMFOR. In situ HE‐XRD derived pair distribution function coupled to RMC simulations confirm OH − trapping in V O and HMF adsorption on metal centers as evident by interlayer distance evolution. Taken together, this work showcases routes for dual‐site electrocatalyst design for improved biomass electrooxidation.

Chemistry↗
DOE OSTI2022

A thermochemical study of iron aluminate-based materials: a preferred class for isothermal water splitting

The use of hydrogen as a renewable fuel has been stymied by our inability to produce it cleanly and economically. The conventional solar thermochemical approach considers a two-step redox cycle with benchmark ceria or a perovskite in a temperature swing configuration, where reduction occurs at a temperature much higher than oxidation. Isothermal redox cycling is feasible and avoids the solid–solid heat recuperation and material stability challenges associated with temperature swing; yet, it has long been thought to be inefficient due to the thermodynamic unfavorability of operating the exothermic oxidation reaction at higher temperatures. Here, in this work, we show that this setback can be overcome with iron aluminate-based spinel solid solutions that preferentially exhibit large changes in oxygen content within the range of oxygen partial pressures expected in large-scale systems. We explain the experimental results with a defect model that assigns cation – not oxygen – vacancies as the predominant point defect responsible for their superior water-splitting ability. When operated isothermally at 1400 °C, the iron aluminate-based materials demonstrate a capacity for hydrogen production greater than 500 μmol g–1 and, as a result, remain viable even under high conversion conditions (i.e., pO 2 < 500 : 1 H 2 O : H 2 ), exceeding the hydrogen yields of ceria and two attractive perovskite candidates following a 400 °C (or less) temperature swing. Isothermal water splitting using iron aluminate-based materials opens the door for more simple, robust, and efficient production of renewable hydrogen.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Strain-Dependent Surface Defect Equilibria of Mixed Ionic-Electronic Conducting Perovskites

We report understanding the surface defect chemistry and its strain dependency is essential in developing next-generation electrochemical devices. However, due to their nanoscale dimensions, surface defects cannot be accessed by conventional techniques used in bulk defect studies. Here, we constructed the strain-dependent surface defect equilibria (i.e., the Brouwer diagram) of mixed ionic-electronic conducting perovskite oxides with near ambient pressure X-ray absorption spectroscopy. Using coherently strained thin-film La 0.6 Sr 0.4 Fe O3 (LSF) as model systems, we probed their surface defect equilibria at 400 °C in oxygen partial pressures between 1 to 10 -5 Torr. We found that the electron holes on the LSF surfaces have strong oxygen character, regardless of the strain states. Nevertheless, tensile strain makes the LSF surface more reducible than the compressed counterpart. These two observations were then validated using first-principles calculations. Finally, with the aid of thermodynamic analyses, we showed that the strain-dependent surface defect equilibria of LSF can be captured by bulk-like ideal solution defect models with shifted oxygen chemical potentials. The findings and methodology presented in this study enable quantitative determination of the surface defect chemistry, which is crucial to understanding and designing functional surfaces for efficient conversions of energy and fuels.

36 MATERIALS SCIENCE↗