Results for “open mobility” — Page 9

NASA NTRS1981

Mobile sampler for use in acquiring samples of terrestrial atmospheric gases

Samples of terrestrial atmospheric gasses from a free body of such gasses using a device characterized by a plurality of tubular bodies adapted to be mounted in side by side relation on a motorized highway vehicle in mutual parallelism with the axis of the normal path of travel for the vehicles. Each of the bodies is of a cylindrical configuration and has an axial opening at each of its opposite ends through which a linear flow path is defined. A pair of pivotally supported, spring-biased sealing caps is mounted adjacent to the ends of the body and continuously urged into a hermetic sealing relationship. A restraint for securing the caps against spring-urged pivotal displacement, includes a separable, normally tensioned line interconnecting the caps and an operable release mechanism for simultaneously releasing the caps for spring-urged displacement. A hot wire cutter is included for separating the line, whereby samples of air are trapped in the body as the caps are spring-driven to assume an hermetically sealed relation with the openings defined in each of the opposite ends of the body.

Tucker, C. E.↗

NASA NTRS1992

Page turning system

A device for holding reading materials for use by readers without arm mobility is presented. The device is adapted to hold the reading materials in position for reading with the pages displayed to enable turning by use of a rubber tipped stick that is held in the mouth and has a pair of rectangular frames. The frames are for holding and positioning the reading materials opened in reading posture with the pages displayed at a substantially unobstructed sighting position for reading. The pair of rectangular frames are connected to one another by a hinge so the angle between the frames may be varied thereby varying the inclination of the reading material. A pair of bent spring mounted wires for holding opposing pages of the reading material open for reading without substantial visual interference of the pages is mounted to the base. The wires are also adjustable to the thickness of the reading material and have a variable friction adjustment. This enables the force of the wires against the pages to be varied and permits the reader to manipulate the pages with the stick.

Kerley, James J.↗

NASA NTRSDate not supplied

Analysis of Traffic Flow in Structured Urban Airspace Networks with MFD-based Feedback Control

This research delves into applying the Macroscopic Fundamental Diagram (MFD) concept to structured airspace networks for comprehensive aggregate modeling and introduces a feedback-based departure function aimed at optimizing traffic flow. Previous studies have rarely examined structured airspace networks featuring non-stationary vehicles through the MFD perspective. We devised a scenario grounded in practical applications, featuring a multi-lane network with explicit lane-changing behavior. The MFD effectively captured the open-loop response, displaying a low-scatter, unimodal curve on the flow versus occupancy plot. Drawing inspiration from the ground transportation ramp-metering strategies, a proportional-integral-based controller was developed. Extensive simulation outcomes suggest that feedback control, informed by MFD, holds significant potential for managing traffic flow in Urban Air Mobility (UAM) environments; a reduction of 80% in the peak number of vehicles in a holding pattern was observed for a slight reduction in throughput in this study.

MFD↗

NASA NTRSDate not supplied

Analysis of Traffic Flow in Structured Urban Airspace Networks with MFD-based Feedback Control

This research delves into applying the Macroscopic Fundamental Diagram (MFD) concept to structured airspace networks for comprehensive aggregate modeling and introduces a feedback-based departure function aimed at optimizing traffic flow. Previous studies have rarely examined structured airspace networks featuring non-stationary vehicles through the MFD perspective. We devised a scenario grounded in practical applications, featuring a multi-lane network with explicit lane-changing behavior. The MFD effectively captured the open-loop response, displaying a low-scatter, unimodal curve on the flow versus occupancy plot. Drawing inspiration from the ground transportation ramp-metering strategies, a proportional-integral-based controller was developed. Extensive simulation outcomes suggest that feedback control, informed by MFD, holds significant potential for managing traffic flow in Urban Air Mobility (UAM) environments; a reduction of 80% in the peak number of vehicles in a holding pattern was observed for a slight reduction in throughput in this study.

MFD↗

NASA NTRS1989

Fast Correction For Doppler In MDPSK Signals

Detector of multiple differential phase-shift-keyed (MDPSK) signals designed to effect combination of open-loop estimation of frequency and differential detection of digital modulation. Improved design expected to decrease probability of bit errors in situations in which carrier frequency uncertain and signals transmitted in bursts too short to allow closed-loop tracking of carrier frequency - for example, in transmission of digitally-coded voice signals in land-mobile/satellite communications at ultra-high frequencies.

Simon, M. K.↗

NASA NTRS2024

LuZip: Lunar Zip-line, Gondola and Cable-based Transportation for Artemis Moon Missions Mobility and Dust Avoidance

Under the Artemis program, NASA plans to return to the surface of the Moon, this time to stay. The Apollo missions identified dust as a major challenge for operations on the lunar surface. This includes traveling from point to point. There have been efforts to develop technologies that prevent dust from entering equipment, making equipment more resilient to dust and improving dust removal. However, operating effectively in the dusty environment for long durations is still an open problem. Here, we explore the use of cable-based transportation, gondolas and zip-lines to stay above the dust for equipment and material transfer as well as human excursions. The advantages and disadvantages, potential architectures, propulsion and materials are discussed. Steps towards infusion into the already ongoing Artemis program are also presented.

Artemis↗

NASA NTRS2014

802.11s Wireless Mesh Network Visualization Application

Results of past experimentation at NASA Johnson Space Center showed that the IEEE 802.11s standard has better performance than the widely implemented alternative protocol B.A.T.M.A.N (Better Approach to Mobile Ad hoc Networking). 802.11s is now formally incorporated into the Wi- Fi 802.11-2012 standard, which specifies a hybrid wireless mesh networking protocol (HWMP). In order to quickly analyze changes to the routing algorithm and to support optimizing the mesh network behavior for our intended application a visualization tool was developed by modifying and integrating open source tools.

Mauldin, James Alexander↗

NASA NTRSDate not supplied

Qualitative Data Coding of User Experience with an Urban Air Mobility Fleet Manager Interface

The NASA Aeronautics Research Mission Directorate created the High Density Vertiplex (HDV) project to integrate and evaluate a prototype Urban Air Mobility (UAM) ecosystem. Part of the HDV testing environment included a prototype operator user interface called the Fleet Manager Interface (FMI). In 2023, HDV conducted flight testing with the FMI during which a user experience (UX) study was performed to assess the quality of UX and elicit design recommendations. As a result, a large database of open-ended, qualitative responses was generated and then coded using a new qualitative data coding technique called Directive String Coding, which used a blended coding approach to generate actionable heuristics that stakeholders (e.g., researchers, UI designers, software developers) could use to answer specific research questions and make future design decisions. The key themes that arose from the coded responses showed that the UX was pleasant, system notifications should be more salient, and information across multiple screens should be integrated into a central display. As the Fleet Manger operational role is still being defined, it is vital to increase our understanding of the tools and capabilities needed for such a role. The results from HDV work will eventually feed into standards for vertiport operations that will enable safe and scalable UAM operations in the United States.

high density vertiplex↗

NASA NTRSDate not supplied

Qualitative Data Coding of User Experience with an Urban Air Mobility Fleet Manager Interface

The NASA Aeronautics Research Mission Directorate created the High Density Vertiplex (HDV) project to integrate and evaluate a prototype Urban Air Mobility (UAM) ecosystem. Part of the HDV testing environment included a prototype operator user interface called the Fleet Manager Interface (FMI). In 2023, HDV conducted flight testing with the FMI during which a user experience (UX) study was performed to assess the quality of UX and elicit design recommendations. As a result, a large database of open-ended, qualitative responses was generated and then coded using a new qualitative data coding technique called Directive String Coding, which used a blended coding approach to generate actionable heuristics that stakeholders (e.g., researchers, UI designers, software developers) could use to answer specific research questions and make future design decisions. The key themes that arose from the coded responses showed that the UX was pleasant, system notifications should be more salient, and information across multiple screens should be integrated into a central display. As the Fleet Manger operational role is still being defined, it is vital to increase our understanding of the tools and capabilities needed for such a role. The results from HDV work will eventually feed into standards for vertiport operations that will enable safe and scalable UAM operations in the United States.

high density veriplex↗

NASA NTRSDate not supplied

Exploration Extravehicular Mobility Unit (xEMU) 11 Foot Vacuum Chamber Upgrades Test Results

The Exploration Extravehicular Mobility Unit (xEMU) uncrewed 11 foot vacuum chamber testing evaluated the capabilities of the 11 foot vacuum chamber facility to support advanced spacesuit testing. The government reference design xEMU spacesuit provided a high-fidelity test article to demonstrate 11 foot vacuum chamber capabilities which included: gas loading of the chamber at varying simulated metabolic rates and open loop suit abort operations, Intravehicular Activity (IVA) vacuum access, consumables recharge, IVA vehicle-provided thermal loop cooling, and IVA vehicle-provided power. To demonstrate the xEMU airlock operations transitioning from IVA to EVA conditions without a test subject in the suit, test support equipment was developed to remotely actuate both the Exploration, Servicing, and Cooling Umbilical (ESCU) and the vacuum access umbilical. This test also evaluated the performance of the Exploration Portable Life Support System (xPLSS) at vacuum conditions. Data was collected and analyzed for carbon dioxide (CO2) scrubbing performance of the Rapid Cycle Amine (RCA) swingbed, for thermal regulation performance of the Suit Water Membrane Evaporator (SWME), and for sensor performance across the xPLSS. This paper will detail the findings of the testing performed with these upgrades which discussed previously laid out in ICES-2025-342.

Robert F Marsch↗

NASA NTRSDate not supplied

Exploration Extravehicular Mobility Unit 11 Foot Vacuum Chamber Upgrades Test Results

The Exploration Extravehicular Mobility Unit (xEMU) uncrewed 11 foot vacuum chamber testing evaluated the capabilities of the 11 foot vacuum chamber facility to support advanced spacesuit testing. The government reference design xEMU spacesuit provided a high-fidelity test article to demonstrate 11 foot vacuum chamber capabilities which included: gas loading of the chamber at varying simulated metabolic rates and open loop suit abort operations, Intravehicular Activity (IVA) vacuum access, consumables recharge, IVA vehicle-provided thermal loop cooling, and IVA vehicle-provided power. To demonstrate the xEMU airlock operations transitioning from IVA to EVA conditions without a test subject in the suit, test support equipment was developed to remotely actuate both the Exploration, Servicing, and Cooling Umbilical (ESCU) and the vacuum access umbilical. This test also evaluated the performance of the Exploration Portable Life Support System (xPLSS) at vacuum conditions. Data was collected and analyzed for carbon dioxide (CO2) scrubbing performance of the Rapid Cycle Amine (RCA) swingbed, for thermal regulation performance of the Suit Water Membrane Evaporator (SWME), and for sensor performance across the xPLSS. This paper will detail the findings of the testing performed with these upgrades which discussed previously laid out in ICES-2025-342.

Robert Marsch↗

NASA NTRS1985

Control of a free-flying robot manipulator system

The goal of the research is to develop and test control strategies for a self-contained, free flying space robot. Such a robot would perform operations in space similar to those currently handled by astronauts during extravehicular activity (EVA). The focus of the work is to develop and carry out a program of research with a series of physical Satellite Robot Simulator Vehicles (SRSV's), two-dimensionally freely mobile laboratory models of autonomous free-flying space robots such as might perform extravehicular functions associated with operation of a space station or repair of orbiting satellites. The development of the SRSV and of some of the controller subsystems are discribed. The two-link arm was fitted to the SRSV base, and researchers explored the open-loop characteristics of the arm and thruster actuators. Work began on building the software foundation necessary for use of the on-board computer, as well as hardware and software for a local vision system for target identification and tracking.

Alexander, H.↗

NASA NTRS2012

Technologies Enabling Exploration of Skylights, Lava Tubes and Caves

Robotic exploration of skylights and caves can seek out life, investigate geology and origins, and open the subsurface of other worlds to humankind. However, exploration of these features is a daunting venture. Planetary voids present perilous terrain that requires innovative technologies for access, exploration, and modeling. This research developed technologies for venturing underground and conceived mission architectures for robotic expeditions that explore skylights, lava tubes and caves. The investigation identified effective designs for mobile robot architecture to explore sub-planetary features. Results provide insight into mission architectures, skylight reconnaissance and modeling, robot configuration and operations, and subsurface sensing and modeling. These are developed as key enablers for robotic missions to explore planetary caves. These results are compiled to generate "Spelunker", a prototype mission concept to explore a lunar skylight and cave. The Spelunker mission specifies safe landing on the rim of a skylight, tethered descent of a power and communications hub, and autonomous cave exploration by hybrid driving/hopping robots. A technology roadmap was generated identifying the maturation path for enabling technologies for this and similar missions.

Robot↗

NASA NTRS1994

Standard protocol stack for mission control

It is proposed to create a fully 'open' architectural specification for standardized space mission command and control. By being open, i.e., independent for any particular implementation, diversity and competition will be encouraged among future commercial suppliers of space equipment and systems. Customers of the new standard capability are expected to include: (1) the civil space community (e.g., NASA, NOAA, international Agencies); (2) the military space community (e.g., Air Force, Navy, intelligence); and (3) the emerging commercial space community (e.g., mobile satellite service providers).

Hooke, Adrian J.↗

NASA NTRS2002

STS-111 Post Flight Presentation

The crews of STS-111 (Endeavour's crew: Ken Cockrell, Commander; Paul Lockhart, Pilot; Franklin Chang-Diaz, Mission Specialist (MS); Philippe Perrin, MS; International Space Station's (ISS) Expedition 4 crew: Yury Onufrienko, Commander; Daniel Bursch, Flight Engineer; Carl Walz, Flight Engineer; ISS Expedition 5 crew: Valery Korzun, Commander; Peggy Whitson, Flight Engineer; Sergei Treschev, Flight Engineer) narrate this video of highlights from the mission. It includes footage from each major portion of the mission: launch preparation, launch, entering orbit, opening payload bay doors, rendezvous of Endeavour with ISS, docking of the crafts and the meeting between Endeavour and Expedition 5 crews and the Expedition 4 crew, which Expedition 5 relieved. Docked operations include: crew transfer procedures, transfer of goods, EVA (extravehicular activity) prep, EVA performed by Chang-Diaz and Perrin which included installing a grapple fixture, mounting the Mobile Base System (MBS) to the Mobile Transporter (MT), and changing a joint on the station's Canadarm 2 robotic arm. The video ends with re-entry and landing of the shuttle.

Source record↗

NASA NTRS1996

Highly Efficient Amplifier for Ka-Band Communications

An amplifier developed under a Small Business Innovation Research (SBIR) contract will have applications for both satellite and terrestrial communications. This power amplifier uses an innovative series bias arrangement of active devices to achieve over 40-percent efficiency at Ka-band frequencies with an output power of 0.66 W. The amplifier is fabricated on a 2.0- by 3.8-square millimeter chip through the use of Monolithic Microwave Integrated Circuit (MMIC) technology, and it uses state-of-the-art, Pseudomorphic High-Electron-Mobility Transistor (PHEMT) devices. Although the performance of the MMIC chip depends on these high-performance devices, the real innovations here are a unique series bias scheme, which results in a high-voltage chip supply, and careful design of the on-chip planar output stage combiner. This design concept has ramifications beyond the chip itself because it opens up the possibility of operation directly from a satellite power bus (usually 28 V) without a dc-dc converter. This will dramatically increase the overall system efficiency. Conventional microwave power amplifier designs utilize many devices all connected in parallel from the bias supply. This results in a low-bias voltage, typically 5 V, and a high bias current. With this configuration, substantial I(sup 2) R losses (current squared times resistance) may arise in the system bias-distribution network. By placing the devices in a series bias configuration, the total current is reduced, leading to reduced distribution losses. Careful design of the on-chip planar output stage power combiner is also important in minimizing losses. Using these concepts, a two-stage amplifier was designed for operation at 33 GHz and fabricated in a standard MMIC foundry process with 0.20-m PHEMT devices. Using a 20-V bias supply, the amplifier achieved efficiencies of over 40 percent with an output power of 0.66 W and a 16-dB gain over a 2-GHz bandwidth centered at 33 GHz. With a 28-V bias, a power level of 1.1 W was achieved with a 12-dB gain and a 36-percent efficiency. This represents the best reported combination of power and efficiency at this frequency. In addition to delivering excellent power and gain, this Ka-band MMIC power amplifier has an efficiency that is 10 percent greater than existing designs. The unique design offers an excellent match for spacecraft applications since the amplifier supply voltage is closely matched to the typical value of spacecraft bus voltage. These amplifiers may be used alone in applications of 1 W or less, or several may be combined or used in an array to produce moderate power, Ka-band transmitters with minimal power combining and less thermal stress owing to the combination of excellent efficiency and power output. The higher voltage operation of this design may also save mass and power because the dc-dc power converter is replaced with a simpler voltage regulator.

Source record↗

NASA NTRS2018

New Capabilities, Products and Usage of NASA Earth Imagery for Near Real Time Applications

NASA's Worldview and Global Imagery Browse Services (GIBS) have provided near real time (NRT) imagery to the public since 2011 and continue to add new capabilities and products. As a web map app for GIBS, Worldview (https://worldview.earthdata.nasa.gov) has recently added new features to support NRT applications such as a "before" and "after" comparison capability and support for geostationary imagery. As an open set of standards-based web map services, GIBS (https://earthdata.nasa.gov/gibs) has added several new NRT imagery products and will soon add new capabilities for better integration with Geographic Information System (GIS) clients. One of NASA's original NRT imagery systems and a long-running workhorse, Rapid Response, has been retired and replaced with a modern, mobile-friendly, and low-bandwidth app dubbed Worldview Snapshots (https://wvs.earthdata.nasa.gov). Finally, this presentation will demonstrate recent usage of these tools and services by those in the NRT community.

Boller, R.↗

NASA NTRSDate not supplied

Machine-learning Solution for Automatic Spacesuit Motion Recognition and Measurement from Conventional Video

Extravehicular Activity (EVA) spacesuits exhibit unique movement patterns due to their design characteristics. Mobility assessments using traditional motion capture systems are cost prohibitive and not feasible for some training conditions (e.g., simulated lunar outdoor terrain). This paper aims to present the ongoing development of machine learning solutions to quantify suit motions from conventional videos without special sensors or hardware. Given the fast growth in deep/machine learning technologies, external expertise was sought from open-source communities. This was expected to accelerate development and provide more cost-effective, time-saving solutions. This work was selected for a NASA Crowdsourcing project through an agency-wide solicitation. Partnerships were formed with the NASA JSC Center of Excellence for Collaborative Innovation and an execution crowdsourcing platform partner to solicit framework developments from external contenders. NASA provided contenders with video clips of spacesuits and simultaneously measured motion capture data during EVA simulation tasks. The contenders used this data to train and develop generalized algorithms to predict motions. At the end of the crowdsourcing event, five solutions were selected from 250 submissions. Each submission was tested and scored using video clips not previously disclosed to the contenders. The scoring metrics measured how well the algorithm detected the suit shape, the 2D suit joint detection accuracy, and 3D joint detection accuracy. The winning solution was able to achieve roughly 85% prediction accuracy (weighted combination of scoring metrics). Overall, the algorithms could efficiently detect various types of spacesuits and motions across different EVA simulation environments such as the Neutral Buoyancy Lab (NBL). However, 3D joint identification is less reliable when parts of the suit were obstructed in the image. After continued improvements and validation, the fully developed system will enable EVA stakeholders to quantify suit kinematic patterns, which can help optimize suit, hardware, and task designs.

Linh Vu↗