SEARCH · Engineering Papers

Results for “observable behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Trap controlled minority-carrier mobility in heavily doped silicon

The activation behavior of the minority-carrier mobility and diffusivity in heavily doped (about 10 to the 20th per cu cm) Si(Si:As) was investigated in the temperature range, 20 - 350 K. Experimental results indicate that hole transitions between the valence band and localized shallow states give rise to the observed behavior. The activation energy is about 10 meV, which suggests that the localized states originate from band tails but does not rule out trapping at boron atoms in the compensated n(+) region.

Neugroschel, A.↗

NASA NTRS1982

Observations on sub-critical flaw growth in complex cracked body geometries

This paper reviews an experimental method for estimating both flaw shapes and stress intensity factors for complex three dimensional cracked body problems encountered in the sub-critical flaw growth regime prior to instability. Examples of the use of the method are cited, and the energy-density approach is suggested as a theory of sufficient generality to accommodate the complex behaviors observed.

Smith, C. W.↗

DOE OSTI2024

Angle-resolved polarized Raman study of layered b-As x P x-1 alloys: Identification of As-P vibrational modes

In this study, the polarization-resolved Raman spectra of b-As x P x-1 flakes with varying arsenic concentration (x = 0, 0.4, and 0.8) are systematically investigated. A clear polarization dependence is observed in the Raman intensity of all the P-P, As-P, and As-As modes and confirmed by the first-principles calculations. The observed angle-dependence can be related to the structure of the Raman tensors of each peak. In particular, the Raman intensities corresponding to As-P vibration modes are studied in detail. The out of plane As-P mode ($A$$^{1}_{g}$) is clearly identified, but the butterfly-shaped behavior observed in the polar plot around 350 cm -1 is interpreted as the combination of the two in-plane vibrations, one along the armchair and the other along the zigzag direction. This work allows unambiguous assignment of the $A$$^{1}_{g}$, B 2g , and $A$$^{2}_{g}$ modes of the As-P vibrational modes and the importance of the consideration of the superposition of the in-plane B 2g and $A$$^{2}_{g}$ modes. Such study can be utilized to further characterize the anisotropic structural properties and analyze the local distribution of the As and P in b-As x P x-1 alloys which will play key roles in electronic and optical properties. Furthermore, this methodology can be further extended to alloyed two-dimensional material systems with in-plane anisotropy in general.

2D materials↗

DOE OSTI2024

Quantum fragmentation in the extended quantum breakdown model

We introduce a one-dimensional (1D) extended quantum breakdown model comprising a fermionic and a spin degree of freedom per site, and featuring a spatially asymmetric breakdown-type interaction between the fermions and spins. Furthermore, our model resembles the breakdown process of particles incident into a cloud chamber with nonzero quantum amplitudes of both exciting and not exciting the local vapor atoms. We analytically show that, in the absence of any magnetic field for the spins, the model exhibits Hilbert space fragmentation within each symmetry sector into exponentially many Krylov subspaces and hence displays nonthermal dynamics. Here, we demonstrate that the fragmentation naturally occurs in an entangled basis and thus provides an example of “quantum fragmentation.” Besides establishing the nature of fragmentation analytically, we also study the long-time behavior of the entanglement entropy and its deviation from the expected Page value as a probe of ergodicity in the system. Upon introducing a magnetic field for the spins, most of the Krylov subspaces merge and the model becomes chaotic. Finally, we study the effects of strong randomness on the system and observe behavior similar to that of many-body localized systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS1984

An analysis of the annual cycle in upper stratospheric ozone

The mid-latitude upper stratospheric ozone profiles obtained by the solar backscatter ultraviolet instrument on the Nimbus 7 satellite show a clear annual cycle both in the absolute ozone amounts between 0.98 and 15.6 mbar and in the magnitude of disturbances that reveal themselves as longitudinal structure. At the lowest pressure analyzed a winter maximum in ozone exists, but as one progresses downward in altitude a shift in the temporal phase of the annual cycle occurs in the vicinity of 3 to 4 mbar. Comparison of the observed behavior with the predictions of a one-dimensional photochemical model shows a systematic tendency for calculated ozone amount to be 20-27 percent below the data for pressures less than 7.8 mbar. The chemical model successfully predicts the change in phase of the annual cycle, although at a pressure greater than observed. Diagnosis of model results shows the observed shift to be closely coupled to the magnitude of the ozone column density near 3-4 mbar. The wavelength-dependent attenuation of the solar radiation field by ozone alters the relative magnitude of the molecular oxygen and ozone dissociation rates, leading to a change in the temporal phase of the annual cycle.

Frederick, J. E.↗

NASA NTRS2019

Investigating Neuro-Consequences of Spaceflight Using Drosophila Melanogaster

Research on human acclimation to spaceflight, including the recent NASA's Twin Study, reports complex effects of the spaceflight environment on health, with both acute and prolonged changes in multiple tissues. Spaceflight includes multiple factors such as microgravity, ionizing radiation, physiological stress, and disrupted circadian rhythms, that have been shown to contribute to pathophysiological responses that target immunity, bone and muscle integrity, cardiovascular and nervous systems. In this study, we used a well-established spaceflight model organism, Drosophila melanogaster, to assess spaceflight-associated changes on the nervous system. With 75% disease gene orthology to humans, short generation time, large sample size and ease of genetic, neuronal and behavioral studies, Drosophila is an excellent model to study nervous system dysfunction. Here, we present results from MVP-Fly-01 spaceflight mission that was launched on SpaceX CRS-14. The MVP hardware (developed by Techshot) used in this mission enabled us to have an in-flight 1g centrifuge, to distinguish the changes resulting from gravity versus those induced by other environmental factors associated with spaceflight. We observe behavioral impairments (p<0.001) and synaptic deficits, including decreased synaptic connections (p<0.05), in 3rd instar larvae which were developed in space. Furthermore, space-grown microgravity adults show a decrease in neuronal (p<0.05) and dendritic field (p<0.01) in adult brains coupled with an increased number of apoptotic cells (p<0.001) compared to in-flight 1g controls, suggesting increased neuronal loss under spaceflight conditions. In summary, we observe that altered gravity leads to gross neurological deficits. To better understand the long-term effects of spaceflight on the nervous system, longitudinal and multigenerational changes were also identified. This study will help elucidate the different approaches to prevent nervous system dysfunction in astronauts during spaceflight, while also contributing to a better understanding of the pathways that are related to some CNS disorders on Earth.

Iyer, Janani↗

NASA NTRS1992

Attenuation behavior of solid dense random media at microwave frequencies

To better understand scattering from nontenuous dense random media such as sea ice and snow, attenuation measurements have been performed on two different types of random media with ka values ranging from 0.5 to 0.7, and 1.5 to 2.1. Experimental results are presented for wave propagation in plane slabs of finite thickness composed of a random distribution of identical, finite scatterers, and a random distribution of scatterers with narrow size distribution. The observed behavior is described in terms of attenuation versus volume fraction, and the behavior of attenuation versus frequency. Results presented are compared to the behavior reported by some earlier experiments where the medium properties are different.

Nadimi, S. A.↗

DOE OSTI2026

Excitation Wavelength-Dependent Emission from Americium(III) in Mineral Acid Solutions

The photoluminescence behavior of trivalent americium, Am(III), in mineral acid solutions is reported under direct-metal excitation at seven high-energy wavelengths in the ultraviolet and visible regions (378-512 nm). This study revealed a dependence of the Am(III)-based visible emission profile on the chosen excitation wavelength. For example, excitation at the more common wavelength of 504 nm produces the two expected emission bands: one at approximately 600 nm (5D1' to 7F0') and another at 690 nm (5D1' to 7F1'). When the excitation wavelength is shifted to 398 nm (targeting the 5D3', 5H7' from 7F0' transitions), the emission occurs almost exclusively at 600 nm. This behavior is unexpected and potentially highlights fundamental knowledge gaps in the current understanding of the intraconfigurational 5f-5f electronic transitions that give rise to Am(III) photoluminescence. Although a full interpretation of these results is limited by the incomplete understanding of Am(III) speciation in mineral acid systems, this study explores several potential explanations for the observed behavior and challenges the widely held assumption of a single emissive Am(III) species.

Americium↗

NASA NTRS1979

Thermal mapping of the northern equatorial and temperate latitudes of Mars

The paper describes the mapping of nighttime temperatures over the northern hemisphere of Mars by using Viking infrared thermal mapping observations. It is shown that large variations of the temperature residual, -45 to +19 K, are related primarily to the thermal inertia of the surface. A general hypothesis is given for the transport of loose material on the Martian surface, which invokes the stability of the smooth, fine-grained surfaces to account for the bimodal thermal behavior observed.

Zimbelman, J. R.↗

NASA NTRS1985

Solar flare development during the impulsive phase as deduced from correlated radio and hard X-ray observations

A correlative study of metric type III/V bursts and hard X-ray events during the preflash and the impulsive phases of solar flares is presented. A total of 55 groups of type III bursts were observed with the Nancay radiospectrograph, and 32 of these were associated with hard X-ray bursts detected with instruments on ISEE 3, SMM, or both. X-ray bursts associated with type III or U bursts, and type V continuum emission lasting less than 10 s are relatively small, with peak fluxes at 30 keV of not more than 1 photon/sq cm per sec per keV. X-ray bursts associated with type III bursts and continuum emission lasting longer than 30 s are considerably more intense, with peak fluxes at 30 keV exceeding 1 photon/sq cm per sec per keV and spectra extending to not less than 100 keV. For these latter events, type III emission was observed at 169 MHz with the Nancay radioheliograph from several locations during the preflash phase. At the time of the rapid increase in the hard X-ray flux, a new source appeared at 169 MHz and proceeded to fluctuate in phase with one of the original sources that brightened at the same time. This type of behavior, observed in 13 flares, is interpreted as being caused by the rapid interaction of two or more magnetic structures giving rise to the impulsive phase of the flare.

Raoult, A.↗

DOE OSTI2022

Negative linear compressibility in Se at ultra-high pressure above 120 GPa

A series of in situ synchrotron X-ray diffraction (XRD) measurements were carried out, combined with first-principles calculations, to study structural phase transitions of selenium at high pressures and room temperature. Several phase transitions were observed, among which an isostructural phase transition was found at around 120 GPa for the first time. Evolved from the rhombohedral (space group R$\bar{3}$m) structure (Se-V), the new phase (Se-V') exhibited an interesting increase of lattice parameter a at pressures from 120 to 148 GPa, known as negative linear compressibility (NLC). The discovery of NLC behavior observed in this work is mainly attributed to the accuracy and fine steps controlled by the membrane system for in situ XRD data collected with an exposure time of 0.5 s. After 140 GPa, a body-centered cubic (b.c.c.) structure Se-VI (space group Im$\bar{3}$m) was formed, which remains stable up to 210 GPa, the highest pressure achieved in this study. The bulk moduli of phases Se-V, Se-V' and Se-VI were estimated to be 83 ± 2, 321 ± 2 and 266 ± 7 GPa, respectively, according to the P–V curve fit by the third-order Birch–Murnaghan equation of state. The Se-V' phase shows a bulk modulus almost 4 times larger than that of the Se-V phase, which is mainly due to the effect of its NLC. NLC in a higher pressure range is always more significant in terms of fundamental mechanism and new materials discovery, yet it has barely been reported at pressures above 100 GPa. This will hopefully inspire future studies on potential NLC behaviors in other materials at ultra-high pressure.

36 MATERIALS SCIENCE↗

DOE OSTI2021

A constitutive structural parameter c b for the work hardening behavior of additively manufactured Ti-6Al-4V

The mechanical behavior of Ti-6Al-4V produced by additive manufacturing processes is assessed as based on a model derived from the Kocks–Mecking relationship. A constitutive parameter c b is derived from a linear Kocks–Mecking relationship for the microstructure that is characteristic of the work hardening behavior. The formulation for c b is determined by considering the plastic strain between the strengths at the proportional limit and the plastic instability. In this way, the model accommodates the variation in work hardening behavior observed when evaluating material as produced and tested along different orientations. The modeling approach is presented and evaluated for the case of Ti-6Al-4V additively manufactured materials as tested under quasi-static uniaxial tension. It is found that different test specimen orientations, along with postbuild heat treatments, produce a change in the microstructure and plasticity behavior which can be accounted for in the corresponding change of the c b values.

36 MATERIALS SCIENCE↗

NASA NTRS1981

Numerical simulation of a sudden stratospheric warming with a three-dimensional, spectral, quasi-geostrophic model

An analysis of a sudden stratospheric warming which developed spontaneously during a winter simulation with a three-dimensional quasi-geostrophic model is described. Changes in the circulation and thermal structure of the winter polar stratosphere that occurred during the warming are shown to be in close agreement with observed behavior: enhanced vertical flux of eddy energy into the stratosphere, rapid temperature increase in high latitudes with a reversal of the zonal mean temperature gradient between midlatitude and pole, destruction of the circumpolar cyclonic vortex, and a marked deceleration of the westerly jet and the appearance of zonal mean easterlies. Energies of the warming are also consistent with observed characteristics. Many aspects of the dynamical development of the present model simulation are shown to agree with a previous model simulation, but there are also areas of disagreement.

Grose, W. L.↗

NASA NTRS1978

A temperature dependent fatigue failure criterion for graphite/epoxy laminates

A fatigue failure criterion applicable to composite materials is developed and applied to predict the fatigue behavior of graphite/epoxy laminates with particular emphasis on the influence of temperature. Tensile stress-strain curves and tension-tension fatigue curves for various unidirectional, angle-ply and symmetrically balanced laminates were developed at test temperatures of 25 C, 74 C, and 114 C. For most laminates a reduction in both static strength and fatigue strength is observed with increasing temperature. This reduction appeared more severe in fatigue loading than in static tensile loading and most severe where the shear stress in the lamina is the dominate failure mode. Through an analytical formulation of shifting functions for the influences of temperature, all fatigue data are shown to be capable of being reduced to a single reference curve at some temperature. Examples are given which demonstrate the capability of the fatigue failure criterion to predict failure of complex symmetrically balanced laminates from relevant parameters obtained from the observed behavior of unidirectional and angle-ply laminates.

Rotem, A.↗

NASA NTRS1979

A temperature dependent fatigue failure criterion for graphite/epoxy laminates

A fatigue failure criterion applicable to composite materials is developed and applied to predict the fatigue behavior of graphite/epoxy laminates with particular emphasis on the influence of temperature. Tensile stress-strain curves and tension-tension fatigue curves for various unidirectional, angle-ply and symmetrically balanced laminates were developed at test temperatures of 25 C, 74 C and 114 C. In general for most laminates a reduction in both static strength and fatigue strength is observed with increasing temperature. This reduction appeared more severe in fatigue loading than in static tensile loading and most severe where the shear stress in the lamina is the dominant failure mode. Through an analytical formulation of shifting functions for the influences of temperature, all fatigue data are shown to be capable of being reduced to a single reference curve at some temperature. Additionally, examples are given which demonstrate the capability of the fatigue failure criterion to predict failure of complex symmetrically balanced laminates from relevant parameters obtained from the observed behavior of unidirectional and angle-ply laminates.

Rotem, A.↗

NASA NTRS1992

Defect behavior, carrier removal and predicted in-space injection annealing of InP solar cells

Defect behavior, observed by deep level transient spectroscopy (DLTS), is used to predict carrier removal and the effects of simultaneous electron irradiation and injection annealing of the performance of InP solar cells. For carrier removal, the number of holes trapped per defect is obtained from measurements of both carrier concentrations and defect concentrations during an isochronal anneal. In addition, from kinetic considerations, the behavior of the dominant defect during injection annealing is used to estimate the degradation expected from exposure to the ambient electron environment in geostationary orbit.

Weinberg, I.↗

NASA NTRS1994

Understanding the determinants of problem-solving behavior in a complex environment

It is often argued that problem-solving behavior in a complex environment is determined as much by the features of the environment as by the goals of the problem solver. This article explores a technique to determine the extent to which measured features of a complex environment influence problem-solving behavior observed within that environment. In this study, the technique is used to determine how complex flight deck and air traffic control environment influences the strategies used by airline pilots when controlling the flight path of a modern jetliner. Data collected aboard 16 commercial flights are used to measure selected features of the task environment. A record of the pilots' problem-solving behavior is analyzed to determine to what extent behavior is adapted to the environmental features that were measured. The results suggest that the measured features of the environment account for as much as half of the variability in the pilots' problem-solving behavior and provide estimates on the probable effects of each environmental feature.

Casner, Stephen A.↗

NASA NTRS2012

Large-Amplitude Longitudinal Oscillations in a Solar Filament

We have developed the first self-consistent model for the observed large-amplitude oscillations along filament axes that explains the restoring force and damping mechanism. We have investigated the oscillations of multiple threads formed in long, dipped flux tubes through the thermal nonequilibrium process, and found that the oscillation properties predicted by our simulations agree with the observed behavior. We then constructed a model for the large-amplitude longitudinal oscillations that demonstrates that the restoring force is the projected gravity in the tube where the threads oscillate. Although the period is independent of the tube length and the constantly growing mass, the motions are strongly damped by the steady accretion of mass onto the threads by thermal nonequilibrium. The observations and our model suggest that a nearby impulsive event drives the existing prominence threads along their supporting tubes, away from the heating deposition site, without destroying them. The subsequent oscillations occur because the displaced threads reside in magnetic concavities with large radii of curvature. Our model yields a powerful seismological method for constraining the coronal magnetic field and radius of curvature of dips. Furthermore, these results indicate that the magnetic structure is most consistent with the sheared-arcade model for filament channels.

lament axes↗