Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “numeric profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Evidence of atmospheric gravity wave perturbations of the Brunt-Vaisala frequency in the atmosphere

A series of high altitude, medium resolution, measurements of temperature, pressure and turbulence have been performed by the Air Force Geophysics Laboratory. These measurements were conducted using the VIZ Manufacturing Co. microsondes with attached micro-thermal probes measuring the temperature structure coefficient. A typical atmospheric temperature measurement is given. Several small temperature inversions are evident in the troposphere. The stratosphere is marked with numerous fluctuations in the temperature profile. Microsondes provide temperature and pressure measurements every 4 seconds up to a maximum altitude of 30 km (MSL). Since the average ascent rate is 5 m/s, the altitude interval between the measurement reports is 20 m. The potential temperature is calculated from the temperature and pressure. Spectral analysis of atmospheric Brunt-Vaisala frequencies reveal spectra similiar to the velocity spectra of Dewan et al. (1984), Daniels (1982), and Endlich and Singleton (1969). The Brunt-Vaisala spectra indicate the existence of separate, distinguishable wave modes.

Good, R. E.↗

Fine-scale motion in NGC 6514 and NGC 6523

Velocity maps of the inner regions of the bright H II regions NGC 6514 and NGC 6523 were made with unprecedented spatial and spectral resolution in the 5007 A line of forbidden O III. In addition to the advantages of an instrumental full width at half-maximum intensity of only 5.4 km/s, the small thermal width of the heavy oxygen ion also allows determination of accurate line widths and velocities. The CCD spectra were numerically fitted to Gaussian line profiles and revealed two separate velocity systems in NGC 6523. The data sets of radial velocities were used to derive the dependence of the most probable turbulent velocities upon the sample sizes, and the spatial dependence of the structure function. These relationships are the basic functions for comparison with the predictions of the models for turbulence in H II regions.

O'Dell, C. R.↗

Techniques for hot structures testing

Hot structures testing have been going on since the early 1960's beginning with the Mach 6, X-15 airplane. Early hot structures test programs at NASA-Ames-Dryden focused on operational testing required to support the X-15 flight test program, and early hot structures research projects focused on developing lab test techniques to simulate flight thermal profiles. More recent efforts involved numerous large and small hot structures test programs that served to develop test methods and measurement techniques to provide data that promoted the correlation of test data with results from analytical codes. In Nov. 1988 a workshop was sponsored that focused on the correlation of hot structures test data with analysis. Limited material is drawn from the workshop and a more formal documentation is provided of topics that focus on hot structures test techniques used at NASA-Ames-Dryden. Topics covered include the data acquisition and control of testing, the quartz lamp heater systems, current strain and temperature sensors, and hot structures test techniques used to simulate the flight thermal environment in the lab.

Deangelis, V. Michael↗

NACA 0015 wing pressure and trailing vortex measurements

A NACA 0015 semispan wing was placed in a low-speed wind tunnel, and measurements were made of the pressure on the upper and lower surface of the wing and of velocity across the vortex trailing downstream from the tip of the wing. Pressure data were obtained for both 2-D and 3-D configurations. These data feature a detailed comparison between wing tips with square and round lateral edges. A two-component laser velocimeter was used to measure velocity profiles across the vortex at numerous stations behind the wing and for various combinations of conditions. These conditions include three aspect ratios, three chord lengths, a square- and a round lateral-tip, presence or absence of a boundary-layer trip, and three image plane positions located opposite the wing tip. Both pressure and velocity measurements were made for the angles of attack 4 deg less than or equal to alpha less than or equal to 12 deg and for Reynolds numbers 1 x 10(exp 6) less than or equal to Re less than or equal to 3 x 10(exp 6).

Mcalister, K. W.↗

Rayleigh/raman Greenland Lidar Observations of Atmospheric Temperature During a Major Arctic Stratospheric Warming Event

Between Jan. 22 1991 to Feb. 5 1991, we made numerous observations of atmospheric temperature profiles between 10 and 70 km by using the combination of Rayleigh and Raman lidar systems contained in the PL Mobile Lidar Facility located at the National Science Foundation Incoherent Radar Facility of Sondrestrom in Greenland. The purpose of these measurements was to observe the dynamics of the winter Arctic stratosphere and mesosphere regions during a winter period from the succession of temperature profiles obtained in our campaign observations. Various aspects of this investigation are presented.

Meriwether, John W.↗

Forced Convection and Sedimentation Past a Flat Plate

The steady laminar flow of a well-mixed suspension of monodisperse solid spheres, convected steadily past a horizontal flat plate and sedimenting under the action of gravity, is examined. It is shown that, in the limit as Re approaches infinity and epsilon approaches 0, where Re is the bulk Reynolds number and epsilon is the ratio of the particle radius a to the characteristic length scale L, the analysis for determining the particle concentration profile has several aspects in common with that of obtaining the temperature profile in forced-convection heat transfer from a wall to a fluid stream moving at high Reynolds and Prandtl numbers. Specifically, it is found that the particle concentration remains uniform throughout the O(Re(exp -1/2)) thick Blasius boundary layer except for two O(epsilon(exp 2/3)) thin regions on either side of the plate, where the concentration profile becomes non-uniform owing to the presence of shear-induced particle diffusion which balances the particle flux due to convection and sedimentation. The system of equations within this concentration boundary layer admits a similarity solution near the leading edge of the plate, according to which the particle concentration along the top surface of the plate increases from its value in the free stream by an amount proportional to X(exp 5/6), with X measuring the distance along the plate, and decreases in a similar fashion along the underside. But, unlike the case of gravity settling on an inclined plate in the absence of a bulk flow at infinity considered earlier, here the concentration profile remains continuous everywhere. For values of X beyond the region near the leading edge, the particle concentration profile is obtained through the numerical solution of the relevant equations. It is found that, as predicted from the similarity solution, there exists a value of X at which the particle concentration along the top side of the plate attains its maximum value phi(sub m) and that, beyond this point, a stagnant sediment layer will form that grows steadily in time. This critical value of X is computed as a function of phi(sub s), the particle volume fraction in the free stream. In contrast, but again in conformity with the similarity solution, for values of X sufficiently far removed from the leading edge along the underside of the plate, a particle-free region is predicted to form adjacent to the plate. This model, with minor modifications, can be used to describe particle migration in other shear flows, as, for example, in the case of crossflow microfiltration.

Pelekasis, Nikolaos A.↗

Comparisons of the Vertical Development of Deep Tropical Convection and Associated Lightning Activity on a Global Basis

Simultaneous radar (13.8 Ghz) and lightning (Lightning Imaging Sensor) observations from the NASA TRMM (Tropical Rainfall Measuring Mission) spacecraft afford a new opportunity to examine differences in tropical continental and oceanic convection on a global basis, The 250 meter vertical resolution of the radar data and the approximately 17 dBZ sensitivity are well suited to providing vertical profiles of radar reflectivity over the entire tropical belt. The reflectivity profile has been shown in numerous local ground-based studies to be a good indicator of both updraft velocity and electrical activity. The radar and lightning observations for multiple satellite orbits have been integrated to produce global CAPPI's for various altitudes. At 7 km altitude, where mixed phase microphysics is known to be active, the mean reflectivity in continental convection is 10-15 dB greater than the value in oceanic convection. These results provide a sound physical basis for the order-of-magnitude contrast in lightning counts between continental and oceanic convection. These observations still beg the question, however, about the contrast in updraft velocity in these distinct convective regimes.

Williams, E.↗

The Tropospheric Wind Lidar Technology Experiment (TWiLiTE): An Airborne Direct Detection Doppler Lidar Instrument Development Program

Global measurement of tropospheric winds is a key measurement for understanding atmospheric dynamics and improving numerical weather prediction. Global wind profiles remain a high priority for the operational weather community and also for a variety of research applications including studies of the global hydrologic cycle and transport studies of aerosols and trace species. In addition to space based winds, a high altitude airborne system flown on UAV or other advanced platforms would be of great interest for studying mesoscale dynamics and hurricanes. The Tropospheric Wind Lidar Technology Experiment (TWiLiTE) project was selected in 2005 by the NASA Earth Sun Technology Office as part of the Instrument Incubator Program. TWiLiTE will leverage significant research and development investments in key technologies made in the past several years. The primary focus will be on integrating these sub-systems into a complete molecular direct detection Doppler wind lidar system designed for autonomous operation on a high altitude aircraft, such as the NASA WB57, so that the nadir viewing lidar will be able to profile winds through the full troposphere. TWiLiTE is a collaboration involving scientists and technologists from NASA Goddard, NOAA ESRL, Utah State University Space Dynamics Lab and industry partners Michigan Aerospace Corporation and Sigma Space Corporation. NASA Goddard and it's partners have been at the forefront in the development of key lidar technologies (lasers, telescopes, scanning systems, detectors and receivers) required to enable spaceborne global wind lidar measurement. The TWiLiTE integrated airborne Doppler lidar instrument will be the first demonstration of a airborne scanning direct detection Doppler lidar and will serve as a critical milestone on the path to a fixture spaceborne tropospheric wind system. The completed system will have the capability to profile winds in clear air from the aircraft altitude of 18 h to the surface with 250 m vertical resolution and less than 2 meters per second velocity accuracy. The instrument design, technologies and predicted performance will be presented.

Gentry, Bruce↗

Huygens Gas Chromatograph Mass Spectrometer Results from Titan

The Huygens Probe executed a successful entry, descent and impact on the Saturnian moon of Titan on January 14, 2005. Gas Chromatograph Mass Spectrometer (GCMS) instrument conducted isotopic and compositional measurements throughout the two and one half hour descent from 146 km altitude, and on the surface for 69 minutes until loss of signal from the orbiting Cassini spacecraft. The GCMS incorporated a quadrupole mass filter with a secondary electron multiplier detection system. The gas sampling system provided continuous direct atmospheric composition measurements and batch sampling through three gas chromatographic (GC) columns, a chemical scrubber and a hydrocarbon enrichment cell. The GCMS gas inlet was heated to prevent condensation, and to evaporate volatiles from the surface after impact. Data products from the GCMS included altitude profiles of the major atmospheric constituents dinitrogen (N2) and methane (CH4), isotope ratios of N-14/N-15, C-12/C-13, and D/H, mole fractions of radiogenic argon (Ar-40)and primordial argon Ar-36), and upper limits on the mole fractions of neon, krypton and xenon, which were found to be below the detection limit of the instrument or absent. Surface measurements confirmed the presence of ethane (C2H6) and cyanogen (C2N2). Later data products include the instrument response to surface outgassing of C2N2, C2H6, acetylene (C2H2),and carbon dioxide (CO2). More recent results include the detection of benzene (C6H6) and height profiles of molecular hydrogen (H2). Numerous other trace species evaporating from the surface were also identified using the GCMS data.

Niemann, Hasso↗

Atmospheric Methane Measurements from an Aircraft Based at NASA Ames: Five Years of Observations by the AJAX Project

The Alpha Jet Atmospheric eXperiment (AJAX) is a research project based at Moffett Field, CA, which collects airborne measurements of ozone, carbon dioxide, methane, water vapor, and formaldehyde, as well as 3-D winds, temperature, pressure, and location. Since its first science flight in 2011, AJAX has developed a wide a variety of mission types, combining vertical profiles (from approx. 8 km to near surface),boundary layer legs, and plume sampling as needed. With an ongoing five-year data set, the team has sampled over 160 vertical profiles, a dozen wildfires, and numerous stratospheric ozone intrusions. This talk will present an overview of our flights flown to date, with particular focus on methane observations in the San Francisco Bay Area, Sacramento, and the delta region.

Carbon Dioxide↗

Streamlining Pre-Launch Support for Missions with Highly Variable Trajectories

As the Goddard Space Flight Center's (GSFC) Flight Dynamics Facility (FDF) continues to ensure mission success in support of Human Space Flight (HSF) and Launch Vehicle (LV) missions, it continues to improve on different areas of mission support. The FDF processes numerous different types of trajectory profiles, and, for each trajectory, the FDF provides multiple acquisition data vectors to the Space Network (SN) White Sands Complex (WSC) for further processing and uplinking to the SN's Tracking and Data Relay Satellites (TDRSs), tracking the vehicle and maintaining communications throughout required support. Some trajectories target a specific orbit plane through Right Ascension of the Ascending Node (RAAN), or yaw, steering, which can yield to high variability across the launch window. Because of this, there can be a large number of trajectory profiles to process and generate acquisition data for that ensure TDRS is accurately pointing to the launch vehicle. Processing many trajectory profiles by FDF and WSC increases the complexity and level of effort associated with support. FDF employs a legacy boundary on the range difference between trajectories, which determines the number of discrete trajectory cases required to maintain communication with TDRS over the full launch window. An analysis was performed to determine a new boundary, taking into consideration current support requirements. The results show the boundary can be expanded beyond the currently employed legacy value without an impact on communication. In doing so, the number of trajectory profiles processed can be reduced, reducing the complexity and level of effort required, with no impact to mission safety.

Flight Operations↗

Preventive Power Outage Estimation Based on a Novel Scenario Clustering Strategy

The increasing occurrence of extreme weather events is challenging power grid operation. For extreme weather events, the system operator is responsible for estimating the power outages and scheduling the restoration resources. This paper proposes an outage evaluation framework to identify the possible unserved load profiles, vulnerable areas, and mobile energy adequacy. The outputs of an outage prediction model tool are used to generate numerous faulted line scenarios. Next, each scenario's nodal unserved load profile is obtained by solving a three-phase restoration model that considers repair crews and mobile energy resources (MERs). Then, a novel scenario clustering strategy is developed to cluster the unserved load profiles into multiple representative profiles which the system operator can focus on. Finally, case studies on a distribution system evaluate the damage caused by an extreme weather event and verify the effectiveness of the proposed scenario clustering strategy.

MATHEMATICS AND COMPUTING,POWER TRANSMISSION AND D↗

Heat transport and temperature boundary-layer profiles in closed turbulent Rayleigh–Bénard convection with slippery conducting surfaces

Here, we report direct numerical simulations (DNS) of the Nusselt number Nu , the vertical profiles of mean temperature Θ(z) and temperature variance Ω(z) across the thermal boundary layer (BL) in closed turbulent Rayleigh–Bénard convection (RBC) with slippery conducting surfaces ( z is the vertical distance from the bottom surface). The DNS study was conducted in three RBC samples: a three-dimensional cuboid with length L=H and width W=H/4 ( H is the sample height), and two-dimensional rectangles with aspect ratios Γ≡L/H=1 and 10. The slip length b for top and bottom plates varied from 0 to ∞ . The Rayleigh numbers Ra were in the range 10 6 $⩽$Ra$⩽$10 10 and the Prandtl number Pr was fixed at 4.3 . As b increases, the normalised Nu/Nu 0 ( Nu 0 is the global heat transport for b =0 ) from the three samples for different Ra and Γ can be well described by the same function Nu/Nu 0 = N 0 tanh( b /λ 0 )+1 , with N 0 =0.8±0.03 . Here λ 0 ≡ L /(2 Nu 0 ) is the thermal boundary layer thickness for b =0 . Considering the BL fluctuations for Pr >1, one can derive solutions of temperature profiles Θ(z) and Ω(z) near the thermal BL for b $⩾$ 0 . When b =0 , the solutions are equivalent to those reported by Shishkina et al. ( Phys. Rev. Lett. , vol. 114, 2015, 114302) and Wang et al. ( Phys. Rev. Fluids , vol. 1, 2016, 082301(R)), respectively, for no-slip plates. For b >0, the derived solutions are in excellent agreement with our DNS data for slippery plates.

42 ENGINEERING↗

Sensitivity of Simulated Radiative Emission from Nitrogen Flows to Chemical Parameters

Numerical models of hypersonic flows rely on chemistry data inferred from experiments and quantum calculations. Experiments from NASA's Electric Arc Shock Tube (EAST) measure the spectral emission of strong shocks in pure nitrogen flows. These spectral profiles are only approximately captured by numerical simulations. To address these discrepancies, one wishes to calibrate some of the chemical parameters to better match experiment. Because there are hundreds of parameters in the numerical model, a sensitivity analysis was carried out on the entire chemistry database to determine which parameters are most important to analyze in the future. In order to perform this work it was necessary to generate a consistent chemical database that interfaced with both the CFD and line-by-line radiation solver. Using Monte Carlo methods, the total Sobol index was calculated for important parameters. Twenty parameters were identified as important across the nitrogen system. However, it was noted that in some spectral regions, the parametric uncertainty was unable to bound EAST measurements. Further improvements could be made by increasing the parameter uncertainties or addressing other sources of modeling error.

Kaelan B Hansson↗

Sensitivity of Simulated Radiative Emission from Nitrogen Flows to Chemical Parameters

Numerical models of hypersonic flows rely on chemistry data inferred from experiments and quantum calculations. Experiments from NASA's Electric Arc Shock Tube (EAST) measure the spectral emission of strong shocks in pure nitrogen flows. These spectral profiles are only approximately captured by numerical simulations. To address these discrepancies, one wishes to calibrate some of the chemical parameters to better match experiment. Because there are hundreds of parameters in the numerical model, a sensitivity analysis was carried out on the entire chemistry database to determine which parameters are most important to analyze in the future. In order to perform this work it was necessary to generate a consistent chemical database that interfaced with both the CFD and line-by-line radiation solver. Using Monte Carlo methods, the total Sobol index was calculated for important parameters. Twenty parameters were identified as important across the nitrogen system. However, it was noted that in some spectral regions, the parametric uncertainty was unable to bound EAST measurements. Further improvements could be made by increasing the parameter uncertainties or addressing other sources of modeling error.

Kaelan Hansson↗

Compressible Rayleigh–Taylor instability subject to isochoric initial background state

The effect of compressibility on the single-mode Rayleigh–Taylor instability is examined using two (2D) and three-dimensional (3D) direct numerical simulations. To isolate compressibility from background stratification effects, this work employs a constant density profile on each side of the interface. The numerical simulations are performed at various Reynolds numbers using the gas kinetic method for static Mach numbers up to M = 0.4. The most important finding is that compressibility acting in isolation enhances the instability and perturbations grows faster with increasing Mach number, unlike previous results with background isothermal state, which show suppression of the instability at higher static Mach numbers. In addition, compressibility is also shown to increase the bubble-spike asymmetry. While the instability grows faster for the 3D case, the findings are qualitatively similar in 2D and 3D. Furthermore, the dynamical reasons underlying the effect of compressibility are elucidated by examining the evolution of vorticity and turbulent kinetic energy transport equations.

42 ENGINEERING↗

Solar particle propagation and modulation theory

Developments related to solar flare particle propagation theory are considered, taking into account the transport equation currently employed to describe the propagation of solar flare particles. This equation does not take into consideration convection with the solar wind, drifts, and changes in particle energy. The equation was solved numerically to generate typical solar flare particle time profiles at 1 AU. The results, however, were not satisfactory. It was found that the numerical method used was apparently in error. New advances which provide approximate analytical solutions to the equation are reported. Questions of galactic cosmic ray propagation in interplanetary space are also discussed.

Lee, M. A.↗

Sensitivity of thermodynamic profiles retrieved from ground-based microwave and infrared observations to additional input data from active remote sensing instruments and numerical weather prediction models

Accurate and continuous estimates of the thermodynamic structure of the lower atmosphere are highly beneficial to meteorological process understanding and its applications, such as weather forecasting. In this study, the Tropospheric Remotely Observed Profiling via Optimal Estimation (TROPoe) physical retrieval is used to retrieve temperature and humidity profiles from various combinations of input data collected by passive and active remote sensing instruments, in situ surface platforms, and numerical weather prediction models. Among the employed instruments are microwave radiometers (MWRs), infrared spectrometers (IRSs), radio acoustic sounding systems (RASSs), ceilometers, and surface sensors. TROPoe uses brightness temperatures and/or radiances from MWRs and IRSs, as well as other observational inputs (virtual temperature from the RASS, cloud-base height from the ceilometer, pressure, temperature, and humidity from the surface sensors) in a physical iterative retrieval approach. This starts from a climatologically reasonable profile of temperature and water vapor, with the radiative transfer model iteratively adjusting the assumed temperature and humidity profiles until the derived brightness temperatures and radiances match those observed by the MWR and/or IRS instruments within a specified uncertainty, as well as within the uncertainties of the other observations, if used as input. In this study, due to the uniqueness of the dataset that includes all the above-mentioned sensors, TROPoe is tested with different observational input combinations, some of which also include information higher than 4 km above ground level (a.g.l.) from the operational Rapid Refresh numerical weather prediction model. These temperature and humidity retrievals are assessed against independent collocated radiosonde profiles under non-cloudy conditions to assess the sensitivity of the TROPoe retrievals to different input combinations.

54 ENVIRONMENTAL SCIENCES↗