Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “neutral model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

The simulated features of heliospheric cosmic-ray modulation with a time-dependent drift model. IV - The role of heliospheric neutral sheet deformation

Previous calculations with a time-dependent drift model revealed the model to be less successful in describing time-dependent modulation during periods of moderate to large solar activity. In this paper, it is argued that a major reason for this is that the previously used wavy heliospheric neutral sheet (HNS) description was based on an idealized HNS not subject to any spatial evolution while propagating radially outward. It is suggested that the deformation and compression of HNS wave peaks will lead to significant increases in the crossfield diffusion across these peaks (short-circuiting). The cosmic rays will effectively experience reduced tilt angles and therefore a reduction in the integrated HNS modulation effect between an observer and the heliospheric boundary. During periods of moderate to large solar activity these HNS deformation processes are progressively more frequent and should lead to a significant reduction in time-dependent modulation as predicted by drift models. Calculations done with radially propagating tilt angles that effectively decrease with radial distance give the expected reduction which improves the general description of modulation from 1987-1988.

Le Roux, J. A.↗

STREAM: Strategic Technology Roadmapping and Energy, Environmental, and Economic Analysis Model

This is the implementation of the framework for the planning of the technological makeup of the industrial sector. Motivated by the efforts to achieve carbon neutrality, the model of this framework modifies the portfolio of technologies over time for the sector of interest such that, - Net Present Value (NPV) is minimized - Constraint on Greenhouse Emissions (GHG), e.g. carbon dioxide, is satisfied - Demand of the underlying commodity is satisfied - The current implementation reflects a case study for the electric power sector. The for a given initial set of capacities of different vintages, the space of decisions include, - Retirement of the existing capacities. - Retrofitting the existing capacities to alternative characteristics. - Creation of new capacities from a technology portfolio. All the associated quantities with the deployments, e.g. CO2, heat requirement, etc.

Thiery, David↗

The neutral oxygen spectrum. 2: Pumping by hydrogen Lyman-beta under the optically thin condition: A first application to the classical novae

A calculation, employing a detailed model of neutral oxygen, is carried out to give fluorescent line intensities expected in a long-proposed photoexcitation by accidental resonance (PAR) process in which hydrogen Lyman-beta photoexcites the oxygen spectrum. The results pertain to the optically thin case but provide an upper limit to the fluorescent intensities which can be attained. They are applied to analyze line ratios involving the strong 8446 A line observed in classical novae during the diffusion-enhanced and Orion phases. Operation of the PAR process in the novae is verified. It is found that photoexcitation rates in the ejecta reach values greater than 0.1/sec, corresponding to hydrogen Lyman-beta radiation field intensities greater than 1250 ergs/cm/sec/sr.

Kastner, S. O.↗

Thermodynamic description of molten salt systems: KCl-LiCl-NaCl and KCl-LiCl-NdCl 3

The mixture of KCl and LiCl has been used as electrolyte in the electrorefining process to recover uranium from used nuclear fuels due to the low melting point. However, lanthanides and sodium in the reactor waste continuously dissolve into it and thus alter its thermodynamic properties. To understand the thermodynamic behavior evolution of the electrolyte with the accumulation of impurities, thermodynamic modeling for KCl-LiCl-NaCl and KCl-LiCl-NdCl 3 and four constituent binary systems in the entire composition space was performed using the CALPHAD (CALculation of PHAse Diagrams) approach. The ionic liquid was described by the two-sublattice model, where neutral species were introduced to consider short-range ordering (SRO) within the melt, whereas the solid solution was modeled based on the Compound Energy Formalism. Literature data on phase equilibria and thermochemical properties were critically evaluated and used during the optimization of thermodynamic parameters for KCl-LiCl-NaCl and KCl-LiCl-NdCl 3 and their subsystems. The calculated phase diagrams and mixing enthalpies are in good agreement with the experimental data. The thermodynamic modeling for the KCl-LiCl-NdCl 3 system was carried out for the first time. To fill the gap in experimental measurement, enthalpy of mixing for the KCl-LiCl-NdCl 3 melt was estimated using the surrounded-ion model. These data then served as critical inputs for thermodynamic optimization. Furthermore, the present study can provide insights into thermodynamic property evolution of the electrolyte and solubility limit of various impurities during the electrorefining process.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Diffuse cosmic gamma rays - Present status of theory and observations.

Theoretical interpretations are proposed for recent positive diffuse gamma-ray flux findings with energy measurements up to the 100 MeV range. Several models of isotropic gamma ray production are considered. Diagrams are plotted to compare the observed background spectrum with (1) an electron bremsstrahlung model, (2) a two-component model involving neutral pion production and decay in cosmic-ray interactions at redshifts up to 100, and (3) a theoretical model involving matter-antimatter annihilation. New results on the diffuse flux from the galaxy are viewed as supporting the pion-decay origin hypothesis for gamma-radiation above 100 MeV.

Stecker, F. W.↗

One-Dimensional Hybrid Satellite Track Model for the Dynamics Explorer 2 (DE 2) Satellite

A one-dimensional hybrid satellite track model has been developed to calculate the high-latitude thermospheric/ionospheric structure below the satellite altitude using Dynamics Explorer 2 (DE 2) satellite measurements and theory. This model is based on Emery et al. satellite track code but also includes elements of Roble et al. global mean thermosphere/ionosphere model. A number of parameterizations and data handling techniques are used to input satellite data from several DE 2 instruments into this model. Profiles of neutral atmospheric densities are determined from the MSIS-90 model and measured neutral temperatures. Measured electron precipitation spectra are used in an auroral model to calculate particle impact ionization rates below the satellite. These rates are combined with a solar ionization rate profile and used to solve the O(+) diffusion equation, with the measured electron density as an upper boundary condition. The calculated O(+) density distribution, as well as the ionization profiles, are then used in a photochemical equilibrium model to calculate the electron and molecular ion densities. The electron temperature is also calculated by solving the electron energy equation with an upper boundary condition determined by the DE 2 measurement. The model enables calculations of altitude profiles of conductivity and Joule beating rate along and below the satellite track. In a first application of the new model, a study is made of thermospheric and ionospheric structure below the DE 2 satellite for a single orbit which occurred on October 25, 1981. The field-aligned Poynting flux, which is independently obtained for this orbit, is compared with the model predictions of the height-integrated energy conversion rate. Good quantitative agreement between these two estimates has been reached. In addition, measurements taken at the incoherent scatter radar site at Chatanika (65.1 deg N, 147.4 deg W) during a DE 2 overflight are compared with the model calculations. A good agreement was found in lower thermospheric conductivities and Joule heating rate.

Deng, Wei↗

The angular distribution of ion flux around an ionospheric satellite.

Ion measurements from the Explorer 31 satellite were used to determine the angular distribution of ions around the satellite. The ion distributions were compared with the electron distributions measured on the same satellite. It is shown that the electron currents (fluxes) in the wake are always larger than the ion currents for a wide domain of plasma parameters. A quantitative comparison of the ion fluxes with a neutral approximation model for the angular distribution is considered. It is found that the ion fluxes become progressively larger than the corresponding computed neutral fluxes as the angle of attack increases from 0 to 180 deg.

Samir, U.↗

Effect of neutral interactions on parallel transport and blob dynamics in gyrokinetic scrape-off layer simulations

The effect of neutral interactions on scrape-off layer (SOL) turbulence is investigated in a continuum gyrokinetic code that has been coupled to a continuum kinetic model of neutral transport. This extends the work of a previous paper, which compared two NSTX SOL simulations in simple helical geometry, one with neutrals and one without. The former included electron-impact ionization, charge exchange, and wall recycling. Here, the case with neutrals is compared to a gyrokinetic-only simulation that includes an effective ionization source to separate the effect of sourcing from charge exchange collisions. It is observed that sourcing accounts for many features of the simulated SOL with neutrals, including density and temperature magnitudes and reduced normalized density fluctuations, but differences persist. In particular, a flatter density profile results due to changes in parallel transport when neutral collisions are included, illustrating the importance of neutral drag on global plasma properties. An analysis of coherent turbulent structures, or blobs, in these simulations demonstrates the case with neutrals has slower and larger blobs. Here, a series of seeded blob simulations corroborates the blob velocity observation. In general, the blob motion does not contribute significantly to radial transport in these simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spatial distribution of energetic plasma sheet electrons.

The spatial distribution of energetic plasma sheet electrons (E greater than 50 keV) out to a radial distance of 24 earth radii using data from electron spectrometer and fluxgate magnetometer experiments on Ogo 5 is presented. A comparison of distributions in geocentric solar magnetospheric coordinates (GSM) prepared with and without the use of a neutral sheet model indicates that the use of such a model facilitates organization of plasma sheet data. The percentage of flux occurrence above a given flux threshold falls off rapidly with distance from the neutral sheet. Contours of constant percentage of occurrence diverge slightly from the neutral sheet at local times away from midnight. This effect decreases with increasing flux threshold.

Walker, R. J.↗

Calculated nighttime eastward plasma drift velocities at low latitudes and their solar cycle dependence

After calculating ambient electron densities as a function of altitude, latitude and local time, a simplified expression is used to calculate F-region eastward plasma drifts given a zonal neutral wind model. The derived eastward plasma drift on a magnetic flux tube is examined as a function of the flux tube apex height. If the neutral wind is assumed to be independent of latitude the plasma drift maximizes along the flux tube which intercepts the F-region peak concentration at the Appleton anomaly. Above this altitude the velocity decreases to reflect a decrease in the flux tube integrated F-region Pedersen conductivity. For a latitude dependent wind the plasma drift tends to maximize along the flux tube which intercepts the F-peak at the dip equator. Above this altitude the drift decreases to reflect the latitude distribution of the wind.

Anderson, D. N.↗

A Model of the Influence of Neutral Air Dynamics on the Seasonal Variation in the Low Ionosphere

Recently it has become clear that the phenomena in the ionospheric D-region are determined to a great extent by dynamical processes in the strato-mesosphere D-region. In this respect much attention is paid to the study of the winter anomaly (WA) phenomenon on medium and short radiowaves, in which the meteorological character of the lower ionosphere is most prominent. Significant experimental data about the variations of the electron concentration, N, ion composition, temperature and dynamic regime during WA permit a better understanding of the character of the physical processes in the middle atmosphere. The influence of the neutral wind on the seasonal variation of the electron concentration N for the altitude interval 90 or = z or = 120 km, where the ratio upsilon sub in/omega sub i, of the ion-neutral collision frequency, upsilon sub in and the ion gyrofrequency, omega sub i decreases from 40 to 1 was evaluated. CIRA-72 is used as a model of the zonal wind.

Nestorov, G.↗

An IEEE 1451.1 Architecture for ISHM Applications

The IEEE 1451.1 Standard for a Smart Transducer Interface defines a common network information model for connecting and managing smart elements in control and data acquisition networks using network-capable application processors (NCAPs). The Standard is a network-neutral design model that is easily ported across operating systems and physical networks for implementing complex acquisition and control applications by simply plugging in the appropriate network level drivers. To simplify configuration and tracking of transducer and actuator details, the family of 1451 standards defines a Transducer Electronic Data Sheet (TEDS) that is associated with each physical element. The TEDS contains all of the pertinent information about the physical operations of a transducer (such as operating regions, calibration tables, and manufacturer information), which the NCAP uses to configure the system to support a specific transducer. The Integrated Systems Health Management (ISHM) group at NASA's John C. Stennis Space Center (SSC) has been developing an ISHM architecture that utilizes IEEE 1451.1 as the primary configuration and data acquisition mechanism for managing and collecting information from a network of distributed intelligent sensing elements. This work has involved collaboration with other NASA centers, universities and aerospace industries to develop IEEE 1451.1 compliant sensors and interfaces tailored to support health assessment of complex systems. This paper and presentation describe the development and implementation of an interface for the configuration, management and communication of data, information and knowledge generated by a distributed system of IEEE 1451.1 intelligent elements monitoring a rocket engine test system. In this context, an intelligent element is defined as one incorporating support for the IEEE 1451.x standards and additional ISHM functions. Our implementation supports real-time collection of both measurement data (raw ADC counts and converted engineering units) and health statistics produced by each intelligent element. The handling of configuration, calibration and health information is automated by using the TEDS in combination with other electronic data sheets extensions to convey health parameters. By integrating the IEEE 1451.1 Standard for a Smart Transducer Interface with ISHM technologies, each element within a complex system becomes a highly flexible computation engine capable of self-validation and performing other measures of the quality of information it is producing.

Morris, Jon A.↗

Particle motion in the tail current sheet

Theory of particle motion in current sheets is reviewed. For small, approximately constant normal magnetic field, Bz, particles oscillate about the current sheet and 'live' within the sheet for one-half gyroperiod based on Bz. This lifetime replaces the mean collision time in the Lorentzian conductivity and thus gives rise to the concept of an inertial (or gyro-) conductivity. A substorm model by Coroniti utilizes this conductivity to allow reconnection to proceed without anomalous processes, due to wave-particle interactions. Chaotic particle orbits may at times be important to the dynamics, depending on parameters such as particle energy, current sheet thickness, and field line curvature. A current sheet model with neutral line predicts a ridge structure and asymmetries in the distribution function. Ion distributions near the plasma sheet boundary layer, during the CDAW 6 interval, are consistent with the model predictions. In recent studies by Mitchell et al. and Williams et al., the major current carriers during the growth phase of a substorm were found to be adiabatic electrons not more than 1 keV, but just before a current disruption event, the tail current was mainly carried by energetic ions undergoing current sheet oscillation.

Speiser, T. W.↗

Dark scalars and heavy neutral leptons at DarkQuest

The proposed DarkQuest beam dump experiment, a modest upgrade to the existing SeaQuest/SpinQuest experiment, has great potential for uncovering new physics within a dark sector. We explore both the near-term and long-term prospects for observing two distinct, highly-motivated hidden sector benchmark models: heavy neutral leptons and Higgs-mixed scalars. We comprehensively examine the particle production and detector acceptance at DarkQuest, including an updated treatment of meson production, and light scalar production through both bremsstrahlung and gluon-gluon fusion. In both benchmark models, DarkQuest will provide an opportunity to probe previously inaccessible interesting regions of parameter space on a fairly short timescale when compared to other proposed experiments.

79 ASTRONOMY AND ASTROPHYSICS↗

Predicting Partial Atomic Charges in Metal–Organic Frameworks: An Extension to Ionic MOFs

Molecular simulation is an invaluable tool to predict and understand the usage of metal–organic frameworks (MOFs) for gas storage and separation applications. Accurate partial atomic charges, commonly obtained from density functional theory (DFT) calculations, are often required to model the electrostatic interactions between the MOF and adsorbates, especially when the adsorbates have dipole or quadrupole moments, such as water and CO 2 . Machine learning (ML) models have been previously employed to predict partial charges and avoid the computational cost associated with DFT calculations. However, previous ML models suffer from small training data sets, which limit their scope of application. In this work, we introduce two novel machine learning models, PACMOF2-neutral and PACMOF2-ionic, aimed at predicting the density-derived electrostatic and chemical (DDEC6) partial atomic charges for both neutral and ionic MOFs. These models not only yield DFT-level accuracy at a fraction of the computational cost but also demonstrate a remarkable improvement in prediction of adsorption, as validated with grand canonical Monte Carlo simulations. Furthermore, the robustness and fast computational time of the PACMOF2 models, along with their transferability to other porous materials such as covalent organic frameworks and zeolites, underscores their potential in high-throughput screening of MOFs for diverse applications.

36 MATERIALS SCIENCE↗

Escape of sulfur and oxygen from Io

Charged particle sputtering is reexamined as a mechanism for escape of sulfur and oxygen from Io. Corotating ions and energetic ions are considered, using the best available determinations of ion fluxes and sputtering yields. It is unclear whether molecular SO2 is the dominant escaping neutral from Io or whether atomic O and S are dominant, but the Voyager detection of SO2(+) in the cold torus implies the presence of molecular SO2 there. Thin atmosphere models encounter serious difficulty in achieving adequate sulfur and oxygen escape rates, but they are not yet ruled out. Ionization and dissociation of SO2 in a sputter corona can dominate direct escape. In thick atmosphere models the neutral escape rates can be much higher, but the oxygen escape rate tends to be too high relative to the sulfur escape rate unless diffusive separation in the atmosphere is limited, perhaps by rapid mixing.

Cheng, A. F.↗

ISEE 3 observations during the CDAW 8 intervals - Case studies of the distant geomagnetic tail covering a wide range of geomagnetic activity

Observations made by the ISEE 3 spacecraft in the distant geomagnetic tail during the eight CDAW 8 intervals are discussed, along with their relation to concurrent geomagnetic activity. This extensive multiinstrument case study of distant tail data covers a wide range of geomagnetic conditions from extended intervals of magnetic quiet with isolated substorms to prolonged periods of intense disturbance. Plasmoids are observed in the distant tail following disturbance enhancements, the time of their appearance being generally consistent with disconnection from the near-earth region at the time of the enhancement. Their structure is entirely consistent with the neutral line model. However, not all enhancements in geomagnetic activity result in the observation of plasmoids. In particular, the CDAW 8 data suggest that, during extended intervals of strong activity, a continuous neutral line may reside in the near-earth tail and some disturbance enhancements may then relate to an increase in the reconnection rate at a preexisting neutral line, rather than to new neutral line and plasmoid formation.

Richardson, I. G.↗

The Environment-Power System Analysis Tool development program

The Environment Power System Analysis Tool (EPSAT) is being developed to provide engineers with the ability to assess the effects of a broad range of environmental interactions on space power systems. A unique user-interface-data-dictionary code architecture oversees a collection of existing and future environmental modeling codes (e.g., neutral density) and physical interaction models (e.g., sheath ionization). The user-interface presents the engineer with tables, graphs, and plots which, under supervision of the data dictionary, are automatically updated in response to parameter change. EPSAT thus provides the engineer with a comprehensive and responsive environmental assessment tool and the scientist with a framework into which new environmental or physical models can be easily incorporated.

Jongeward, Gary A.↗