Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nano”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Visualizing heterogeneous dipole fields by terahertz light coupling in individual nano-junctions

The challenge underlying superconducting quantum computing is to remove materials bottleneck for highly coherent quantum devices. The nonuniformity and complex structural components in the underlying quantum circuits often lead to local electric field concentration, charge scattering, dissipation and ultimately decoherence. Here we visualize interface dipole heterogeneous distribution of individual Al/AlO$_{x}$/Al junctions employed in transmon qubits by broadband terahertz scanning near-field microscopy that enables the non-destructive and contactless identification of defective boundaries in nano-junctions at an extremely precise nanoscale level. Our THz nano-imaging tool reveals an asymmetry across the junction in electromagnetic wave-junction coupling response that manifests as hot (high intensity) vs cold (low intensity) spots in the spatial electrical field structures and correlates with defected boundaries from the multi-angle deposition processes in Josephson junction fabrication inside qubit devices. The demonstrated local electromagnetic scattering method offers high sensitivity, allowing for reliable device defect detection in the pursuit of improved quantum circuit fabrication for ultimately optimizing coherence times.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Enhanced strength of nano-polycrystalline diamond by introducing boron carbide interlayers at the grain boundaries

Polycrystalline diamond with high mechanical properties and excellent thermal stability plays an important role in industry and materials science. However, the increased inherent brittle strength with the increase of hardness has severely limited its further widespread application. In this work, we produced well-sintered nano-polycrystalline (np) diamond by directly sintering fine diamond powders with the boron carbide (B 4 C) additive at high pressure and high temperatures. The highest hardness value of up to ~90 GPa was observed in the np-diamond (consisting of fine grains with a size of 16 nm) by adding 5 wt% B 4 C at 18 GPa and 2237 K. Moreover, our results reveal that the produced samples have shown noticeably enhanced strength and toughness (18.37 MPa m 0.5 ) with the assistance of the soft phase at the grain boundaries, higher than that of the hardest known nano-twined diamond by ~24% and a little greater than that of the toughest CVD diamond (18 MPa m 0.5 ). We report this study offers a novel functional approach in improving and controlling the hardness and stiffness of polycrystalline diamond.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Circumventing thermodynamics to synthesize highly metastable perovskites: nano eggshells of SnHfO 3

Sn(II)-based perovskite oxides, being the subject of longstanding theoretical interest for the past two decades, have been synthesized for the first time in the form of nano eggshell particle morphologies. All past reported synthetic attempts have been unsuccessful owing to their metastable nature, i.e., by their thermodynamic instability towards decomposition to their constituent oxides. A new approach was discovered that finally provides an effective solution to surmounting this intractable synthetic barrier and which can be the key to unlocking the door to many other predicted metastable oxides. A low-melting KSn 2 Cl 5 salt was utilized to achieve a soft topotactic exchange of Sn(II) cations into a Ba-containing perovskite, i.e., BaHfO 3 with particle sizes of ~350 nm, at a low reaction temperature of 200 °C. The resulting particles exhibit nanoshell-over-nanoshell morphologies, i.e., with SnHfO 3 forming as ~20 nm thick shells over the surfaces of the BaHfO 3 eggshell particles. Formation of the metastable SnHfO 3 is found to be thermodynamically driven by the co-production of the highly stable BaCl 2 and KCl side products. Despite this, total energy calculations show that Sn(II) distorts from the A-site asymmetrically and randomly and the interdiffusion has a negligible impact on the energy of the system (i.e., layered vs. solid solution). Additionally, nano eggshell particle morphologies of BaHfO 3 were found to yield highly pure SnHfO 3 for the first time, thus circumventing the intrinsic ion-diffusion limits occurring at this low reaction temperature. In summary, these results demonstrate that the metastability of many theoretically predicted Sn(II)-perovskites can be overcome by leveraging the high cohesive energies of the reactants, the exothermic formation of a stable salt side product, and a shortened diffusion pathway for the Sn(II) cations.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The crystal orientation of THF clathrates in nano-confinement by in situ polarized Raman spectroscopy

Gas hydrates form at high pressure and low temperatures in marine sediments and permafrost regions of the earth. Despite forming in nanoporous structures, gas hydrates have been extensively studied only in bulk. Understanding nucleation and growth of gas hydrates in nonporous confinement can help create ways for storage and utilization as a future energy source. Herein, we introduce a new method for studying crystal orientation/tilt during tetrahydrofuran (THF) hydrate crystallization under the influence of nano-confinement using polarized Raman spectroscopy. Uniform cylindrical nanometer size pores of anodic aluminum oxide (AAO) are used as a model nano-confinement, and hydrate experiments are performed in a glass microsystem for control of the flash hydrate nucleation kinetics and analysis via in situ polarized Raman spectroscopy. The average THF hydrate crystal tilt of 56 ± 1° and 30.5 ± 0.5° were observed for the 20 nm and 40 nm diameter pores, respectively. Crystal tilt observed in 20 and 40-nanometer-size pores was proportional to the pore diameter, resulting in lower tilt relative to the axis of the confinement at larger diameter pores. Finally, the results indicate that the hydrates nucleation and growth mechanism can depend on the nanoconfinement size. A 1.6 ± 0.01 °C to 1.8 ± 0.01 °C depression in melting point compared to the bulk is predicted using the Gibbs–Thomson equation as a direct effect of nucleation in confinement on the hydrate properties.

25 ENERGY STORAGE↗
DOE OSTI2026

Imaging conductive nano-domains induced by Gd intercalation in epitaxial bilayer graphene

We report nano-infrared (IR) imaging and spectroscopy of epitaxial bilayer graphene (BLG) on silicon carbide (SiC) partially intercalated with gadolinium (Gd). Gd intercalation produces a high density of nanoscale conducting domains that exhibit pronounced IR enhancement at frequencies above the SiC phonon resonance and pronounced amplitude suppression at the resonance. Both effects originate from the increased local optical conductivity induced by Gd. Quantitative modeling of the nano-IR spectra shows that the conductivity of intercalated regions is enhanced by more than a factor of two relative to pristine BLG. This enhancement is attributed to the electronic decoupling of the graphene layers combined with substantial charge transfer from the intercalated atoms. These results demonstrate that controlled metal intercalation enables spatially resolved tuning of the electronic and optical responses of wafer-scale graphene, providing a versatile platform for graphene-based optoelectronic and nanophotonic applications.

Fralaide, Michael [Ames Laboratory, and Iowa State↗
DOE OSTI2025

Subsurface hydrogen, curvature, and strain: lessons from electro-reduction of benzaldehyde on nano-structured Pd catalysts

The unique ability of palladium (Pd) to absorb hydrogen and form a bulk hydride is vital for chemical transformations that involve hydrogenation reactions. Nano-structured Pd catalysts offer a promise of tuning these reaction rates by exploiting variations of reactant binding energies depending on the surface structure and morphological constraints that result in inhomogeneous strain. However, the interplay between the nano-structure of Pd and the ability of Pd to adsorb (and absorb) hydrogen as well as other reactive species needs to be better understood for a rational understanding of competitive chemical transformations at Pd surfaces. We consider the effects of the surface corrugation, strain, and subsurface Pd hydride on the reduction of benzaldehyde to benzyl alcohol in two qualitatively different samples – Pd nanoparticles and Pd gels formed by quasi-one-dimensional chains of these nanoparticles. Our electrochemical measurements and computational modelling suggest that surface concave sites, inherent to Pd gels, facilitate hydrogen transfer to the Pd subsurface region, thus weakening benzaldehyde binding to the surface. This effect is further modulated by the strain, depending on the local coordination environment on the corrugated surface. Furthermore, these findings demonstrate how structurally complex samples in the form of gels provide degrees of freedom for controlling the behavior of metal catalysts that are not available in isolated nanoparticles, which paves the way for new approaches in the design of catalytic materials and synthesis of metal hydrides.

Padavala, Sri Krishna Murthy [University of Minnes↗
DOE OSTI2021

Crystallographic analysis of nano-tendril bundle vs fuzz growth on tungsten exposed to helicon wave-coupled helium plasma

The propensity for nano-tendril bundle (NTB) vs widespread nano-tendril growth (i.e., fuzz) on polycrystalline W under varying ion energy modulation conditions, from DC to peak-to-peak energy modulation of 42 eV at 13.56 MHz, is correlated with the crystal orientation of the underlying grains. Grains that are vicinal to crystal orientations with high surface diffusivity (e.g., {101} for a body centered cubic crystal structure) exhibit NTB growth at lower ion energy modulation amplitude than grains that are vicinal to low surface diffusivity orientations, such as {100}. Adatom mobility considerations are presented to describe the experimental observations. These results support that surface diffusion or W adatom mobility enhanced by ion bombardment plays a key role in the surface morphology evolution of W under He irradiation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Spin dynamics in permalloy nano-ellipses for honeycomb and square lattices

We report experimental and theoretical studies of spin dynamics in lattice structures of permalloy (Ni 80 Fe 20 ) nano-ellipses, with four different types of networks including honeycomb and square lattices. The lattices are patterned at the center line of the co-planar wave guide and consist of non-contacting or contacting ellipses. Micromagnetic simulations show excellent agreement with the broadband ferromagnetic resonance (FMR) experimental results. We find the existence of a spin-wave mode localized in the vertex region of the contacting nano-ellipse network. Our finding has important implications when designing an artificial spin ice (ASI) network for functional magnonics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Ordering-mediated local nano-clustering results in unusually large Hall-Petch strengthening coefficients in high entropy alloys

This paper reports a dramatic increase in the grain boundary strengthening or Hall-Petch coefficient, K, by systematically investigating the effect of Al addition on tensile yield strength in CoFeNi and CoCrFeNi high entropy alloys (HEAs) or complex concentrated alloys (CCAs). Additionally, detailed atom probe tomography (APT) revealed a high number density of Ni-Al rich nano-clusters in the Al 0.3 CoFeNi and Al 0.3 CoCrFeNi HEAs/CCAs, which can be rationalized based on the strong chemical ordering tendency between these elements. Consequently, the huge increase in K value can be attributed to the additional stress required for overcoming coherency strain fields arising from these nano-clusters.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Experimental Evaluation of Geopolymer, Nano-Modified, and Neat Class H Cement by Using Diametrically Compressive Tests

Abstract Cement is the prime barrier material to maintain zonal isolation during wellbore life-cycle. Different types of the cement have different performances on sealability. The primary objective of this study is evaluation of three types of cement systems, neat Class H, nano-synthetic graphite, and rock-based geopolymer cements, on interfacial bond integrity. Diametrical compressive tests are used on casing–cement–formation systems. Cement performances are tested in a conventional configuration (Berea Sandstone). A universal testing system is utilized to analyze the relationship applied load–axial strain and the digital image correlation (DIC) technique is used to generate the strain field maps. Based on the relationship and DIC results, bond strengths in different cement systems are evaluated. Additionally, microscope images provide insight explanations of the bond from micro-view. Based on the experimental results, failures of all cases initiate and propagate from the casing–cement interface. Then, radial cracks develop through the formation. This is because the mechanical interlocking bonds are formed only at the cement–sandstone interface to enhance the bond strength. The comparison of geopolymer and nano-modified cements with the conventional cement (neat Class H) shows that the unconventional cements have a lower maximum load and higher axial strain before failure of the samples. It indicates that both the two kinds of cements are more ductile than conventional cement and can support more deformation before the initiation of cracks.

Energy & Fuels↗
DOE OSTI2022

Terahertz nano-imaging of metal-insulator transition in Cd 2 Os 2 O 7

The osmate pyrochlore Cd 2 Os 2 O 7 supports an antiferromagnet insulator ground state with an all-in/all-out (AIAO) spin ordering at low temperature. Above 225 K, Cd 2 Os 2 O 7 becomes a paramagnetic metal whereas the mechanism of this metal-to-insulator transition (MIT) remains elusive. In this letter, we use cryogenic near-field technique operating at terahertz frequencies to study the evolution of low-energy response across the MIT. We observed a systematic variation of the magnitude of nano-THz signal across the transition, consistent with the trend in the direct-current conductivity. Conducting domain walls that dominate the nano-scale landscape of the conductivity of a closely related AIAO system Nd 2 Ir 2 O 7 are not apparent in Cd 2 Os 2 O 7

36 MATERIALS SCIENCE↗
DOE OSTI2022

Nano-porous GaN cladding and scattering loss in edge emitting laser diodes

We report continuous wave operation of electrically injected InGaN laser diodes using nano-porous GaN n-side cladding with 33% porosity. At 454 nm emission wavelength, the pulsed injection slope efficiency is 0.24 W/A with a high loss of 82 cm -1 . The considerable 60 cm -1 of excess loss of the nano-porous clad lasers is attributed to scattering at pores in unintentionally 3% porosified layers, supported by numerical modeling. Simulations comparing porous GaN cladding to AlInN cladding for lasers operating at 589 nm indicate that the porous cladding provides similar internal loss and lower thermal impedance.

36 MATERIALS SCIENCE↗
DOE OSTI2024

X-ray nano-holotomography reconstruction with simultaneous probe retrieval

In conventional tomographic reconstruction, the pre-processing step includes flat-field correction, where each sample projection on the detector is divided by a reference image taken without the sample. When using coherent X-rays as a probe, this approach overlooks the phase component of the illumination field (probe), leading to artifacts in phase-retrieved projection images, which are then propagated to the reconstructed 3D sample representation. The problem intensifies in nano-holotomography with focusing optics, which, due to various imperfections creates high-frequency components in the probe function. Here, we present a new iterative reconstruction scheme for holotomography, simultaneously retrieving the complex-valued probe function. Implemented on GPUs, this algorithm results in 3D reconstruction resolving twice thinner layers in a 3D ALD standard sample measured using nano-holotomography.

Nikitin, Viktor↗
DOE OSTI2023

Enhancing Plastic Recycling Through Nano-Scale Structure Analysis in Custom Block Copolymer Filaments (Rev.1)

As plastic production continues to increase, new methods to combat plastic waste are needed. This paper explores upcycling, a way to increase the utility or value of waste plastic. This can be done using block copolymers as compatibilizers. Block copolymers are made of two immiscible polymer blocks that phase separate on the nanoscale, forming small structures. The orientation of these nano-scale structures influences mechanical properties, and we show that orientation can be controlled by directional 3D (three dimensional) printing. Using small-angle X-ray scattering (SAXS), we analyze block copolymer filaments extruded at varying speeds. The SAXS data provide a baseline understanding of nano-scale structure in these unique filaments for future use in 3D printing experiments.

36 MATERIALS SCIENCE↗
NASA NTRS1999

Nano-Plasticity of Single-Wall Carbon Nanotubes Under Uniaxial Compression

Nano-plasticity of thin single-wall carbon nanotubes under uniaxial compression is investigated through generalized tight-binding molecular dynamics (GTBMD) and ab-initio electronic structure methods. A novel mechanism of nano-plasticity of carbon nanotubes under uniaxial compression is observed in which bonding geometry collapses from a graphitic (sp(sup 2)) to a localized diamond like (sp(sup 3)) reconstruction. The computed critical stress (approximately equals 153 G Pa) and the shape of the resulting plastic deformation is in good agreement with recent experimental observation of collapse and fracture of compressed carbon nanotubes in polymer composites.

Srivastava, Deepak↗
NASA NTRS2001

Equivalent-Continuum Modeling of Nano-Structured Materials

A method has been developed for modeling structure-property relationships of nano-structured materials. This method serves as a link between computational chemistry and solid mechanics by substituting discrete molecular structures with an equivalent-continuum model. It has been shown that this substitution may be accomplished by equating the vibrational potential energy of a nano-structured material with the strain energy of representative truss and continuum models. As an important example with direct application to the development and characterization of single-walled carbon nanotubes, the model has been applied to determine the effective continuum geometry of a graphene sheet. A representative volume element of the equivalent-continuum model has been developed with an effective thickness. This effective thickness has been shown to be similar to, but slightly smaller than, the interatomic spacing of graphite.

Odegard, Gregory M.↗
NASA NTRS2004

Nano-casted Metal Oxide Aerogels as Dual Purpose Structural Components for Space Exploration

NASA missions and space exploration rely on strong, ultra lightweight materials. Such materials are needed for building up past and present space vehicles such as the Sojourner Rover (1997) or the two MERs (2003), but also for a number of components and/or systems including thermal insulators, Solar Sails, Rigid Aeroshells, and Ballutes. The purpose of my internship here at Glenn Research Center is to make dual purpose materials; materials that in addition to being lightweight have electronic, photophysical and magnetic properties and, therefore, act as electronic components and sensors as well as structural components. One type of ultra lightweight material of great interest is aerogels, which have densities ranging from 0.003 g/cc to 0.8 g/cc . However, aerogels are extremely fragile and, as a result, have limited practical applications. Recently, Glenn Research Center has developed a process of nano-casting polymers onto the inorganic network of silica-based aerogels increasing the strength 300 fold while only increasing the density 3 fold. By combining the process of nano-casting polymers with inorganic oxide networks other than silica, we are actively pursuing lightweight dual purpose materials. To date, thirty different inorganic oxide aerogels have been prepared using either standard sol-gel chemistry or a non-alkoxide method involving metal chloride precursors and an epoxide; epichlorohydrin, propylene oxide or trimethylene oxide, as proton scavengers. More importantly, preliminary investigations show that the residual surface hydroxyl groups on each of these inorganic oxide aerogels can be successfully crosslinked with urethane. In addition to characterizing physical and mechanical properties such as density, strength and flexibility, each of these metal oxide aerogels are being characterized for thermal and electronic conductivity and magnetic and optical properties.

Vassilaras, Plousia E.↗