Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “monochromators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Temperature control analysis and flight results for the Viking Orbiter 1975 Mars atmospheric water detection instrument

The Mars atmospheric water detector (MAWD) instrument required a temperature of -70 C at the detector. The monochromator housing required +20 C + or - 1 C. This instrument was located on the scan platform, and slewed across two solar panels. The thermal design for the detector was an open flat plate radiator thermally isolated on four 1-in. tubes, with a flexible strap to the detector. MAWD radiator view factors and heat loads from the spacecraft were determined for the Lander on and off, for all angular positions of the scan platform. Subsystem and system tests were performed using the 25-ft diameter solar simulator. In-flight results have shown no anomalies, and no degradation has been observed. Servo-controlled heaters are used to control the temperature.

Kavanagh, H. M.↗

Temperature effect on nitrogen-induced absorption of oxygen in the Herzberg continuum

The effect of temperature on the total absorption of O2 induced by collisions with N2 has been measured at various temperatures in the Herzberg continuum using a one-meter normal-incidence grating monochromator. It is observed that absorption increases as the temperature decreases, which is ascribed to changes in the rate of formation of the dimers O2-O2 and O2-N2. The interaction constants for these dimers are determined as functions of temperature and then utilized to calculate the heats of dissociation of O2-O2 and O2-N2. Their respective values are found to be 0.0146 + or - 0.001 and 0.425 + or - 0.002 eV. Also, the interaction constants for these dimers measured at 200 + or - 1 K are utilized to investigate their effect on the absorption of solar radiation in the stratosphere.

Shardanand, MR.↗

Potential digitization/compression techniques for Shuttle video

The Space Shuttle initially will be using a field-sequential color television system but it is possible that an NTSC color TV system may be used for future missions. In addition to downlink color TV transmission via analog FM links, the Shuttle will use a high resolution slow-scan monochrome system for uplink transmission of text and graphics information. This paper discusses the characteristics of the Shuttle video systems, and evaluates digitization and/or bandwidth compression techniques for the various links. The more attractive techniques for the downlink video are based on a two-dimensional DPCM encoder that utilizes temporal and spectral as well as the spatial correlation of the color TV imagery. An appropriate technique for distortion-free coding of the uplink system utilizes two-dimensional HCK codes.

Habibi, A.↗

Ultraviolet spectrum of the Aurora /2000-2800 A/

Ultraviolet spectra between 2000 and 2800 delta-v of an IBC II(+) aurora were obtained by a rocket-borne Ebert-Fastie monochromator at 15-A resolution over Fort Churchill, Manitoba. The v-prime = 0-8 progressions of the N2 Vegard-Kaplan system, the delta-v = 8 sequence of the Lyman-Birge-Hopfield system, and a progression attributed to the Herman-Kaplan system were identified by a synthetic spectrum analysis. Relative populations of the first eight vibrational levels of the A3 Sigma u(+) state at high altitude were obtained from the theoretically generated spectra, and quenching rate coefficients were derived for these eight levels by using an atomic oxygen concentration derived from data from another experiment on board. For v = 0 the quenching rate coefficient was found to be 2.0 times 10 the minus 10th cu cm/sec and was not found to increase for higher vibrational levels. The intensity of the (0,2) band of the Herman-Kaplan system was found to be about 5 times the theoretically predicted value, but even so, the cascade from E3 Sigma g(+) provides less than 2% of the A3 Sigma u(+) state population.

Beiting, E. J., III↗

Solar spectral irradiance at ground level

Available quantitative data on solar total and spectral irradiance is examined in the context of utilization of solar irradiance for terrestrial applications of solar energy. A brief review is given on the extraterrestrial solar total and spectral irradiance values. Computed values of solar spectral irradiance at ground level for different air mass values and various levels of atmospheric pollution or turbidity are also presented. Wavelengths are given for computation of solar absorptance, transmittance and reflectance by the 100-selected-ordinate method and by the 50-selected-ordinate method from air mass two solar spectral irradiance for the four degrees of atmospheric pollution. Total solar spectral irradiance measured with a prism monochromator is examined to evaluate the direct solar spectral irradiance for a surface normal to the sun's rays and to compare the computed spectrum with the experimentally observed one.

Mecherikunnel, A. T.↗

Optical calibrator for TDL spectrometers

Two etalons and monochromator mode selector help calibrate spectrometer in selected laser mode. Technique accurately determines free spectral range of etalon. By establishing number of fringes between two modes, both of which have been calibrated with molecular line standards, one finds free spectral range with error inversely proportional to spectral interval between calibration points. Procedure establishes free spectral range of etalon without prior knowledge of its length or refractive index.

Jennings, D. E.↗

Spectral properties of gaseous uranium hexafluoride at high temperature

A study to determine relative spectral emission and spectral absorption data for UF6-argon mixtures at elevated temperatures is discussed. These spectral data are required to assist in the theoretical analysis of radiation transport in the nuclear fuel-buffer gas region of a plasma core reactor. Relative emission measurements were made for UF6-argon mixtures over a range of temperatures from 650 to 1900 K and in the wavelength range from 600 to 5000 nanometers. All emission results were determined for a total pressure of 1.0 atm. Uranium hexafluoride partial pressures varied from about 3.5 to 12.7 mm Hg. Absorption measurements were attempted at 600, 625, 650 and 675 nanometers for a temperature of 1000 K. The uranium partial pressure for these determinations was 25 mm Hg. The results exhibit appreciable emission for hot UF6-argon mixtures at wavelengths between 600 and 1800 nanometers and no measurable absorption. The equipment used to evaluate the spectral properties of the UF6-argon mixtures included a plasma torch-optical plenum assembly, the monochromator, and the UF6 transfer system. Each is described.

Krascella, N. L.↗

Some experience with arc-heater simulation of outer planet entry radiation

An electric arc heater was operated at 800 amperes and 100,000 pa (1 atm) with hydrogen, helium, and two mixtures of hydrogen and helium. A VUV-scanning monochromator was used to record the spectra from an end view while a second spectrometer was used to determine the plasma temperature using hydrogen continuum radiation at 562 nm. Except for pure helium, the plasma temperature was found to be too low to produce significant helium radiation, and the measured spectra were primarily the hydrogen spectra with the highest intensity in the pure hydrogen case. A radiation computer code was used to compute the spectra for comparison to the measurements and to extend the study to simulation of outer planet entry radiation. Conductive cooling prevented ablation of phenolic carbon material samples mounted inside the arc heater during a cursory attempt to produce radiation absorption by ablation gases.

Wells, W. L.↗

Diagnostics and control of wavenumber stability and purity of tunable diode lasers relevant to their use as local oscillators in heterodyne systems

Initial operation of the tunable diode lasers (TDL) showed that it was not possible to adjust the wavenumber to one selected a priori in the TDL tuning range. During operation, the operating point would change by 0.1/cm over the longer term with even larger changes occurring during some thermal cycles. Most changes during thermal cycling required using lower temperatures and higher currents to reach the former wavenumber (when it could be reached). In many cases, an operating point could be selected by changing TDL current and temperature to give both the desired wavenumber and most of the power in a single mode. The selection procedure had to be used after each thermal cycling. Wavenumber nonlinearities of about 10% over a 0.5 cm tuning range were observed. Diagnostics of the single mode selected by a grating monochromator showed wavenumber fine structure under certain operating conditions. The characteristics due to the TDL environment included short term wavenumber stability, the instrument lineshape function, and intermediate term wavenumber stability.

Poultney, S.↗

Intermode calibration of diode-laser spectra using tandem etalons

The paper deals with an approach which can improve the accuracy of etalon calibration of tunable diode-laser (TDL) spectra in the IR and extend absolute calibration among several isolated modes. Two etalons placed in the laser beam produce a combined fringe pattern that, with the aid of a monochromator mode selector, can be used to establish the number of fringes between any two spectral points separated by a large frequency interval. This technique has been applied to several similar cases for calibration of isolated modes or verification of the identity of lines of known frequency.

Jennings, D. E.↗

Photoelectric scanning /6.65-m/ spectrometer for VUV cross-section measurements

A 6.65-m normal incidence vacuum spectrograph has been provided with a photoelectric scanner that is easily interchangeable with the original plate holder. The scanner consists essentially of a photoelectric detector and an exit slit that scans mechanically along the focal surface while the grating and entrance slit remain stationary. The design and construction of the 6.65-m scanning spectrometer, which operates in the 120-300-nm wavelength region, are discussed. The wavelength resolution of 0.001 nm obtained photoelectrically is better than that of any existing vacuum monochromator. The performance of the instrument is illustrated with vacuum ultraviolet scans of the (1, 5) band of fourth positive system of CO in emission, and the (14, 0) band of the Schumann-Runge system of O2 in absorption.

Yoshino, K.↗

Surface reflectance measurements in the UV from an airborne platform. I

The reflectance of naturally occurring surfaces is measured from a twin engine Cessna 402B aircraft both spectrally (0.29-0.40 micron) with a compact double monochromator and broadband (0.29-1.2 micron) with a UV enhanced photodiode. The measurement system, which is computer controlled and electrically isolated from the aircraft, consists of upward and downward looking hemispheric diffusers, filters, a rotating 90 deg mirror, a focusing lens, and a double monochromator/PMT or the UV photodiode. Measurements are taken at several altitudes enabling the empirical determination of backscatter and attenuation effects on the reflectance. The results are presented for pine forest canopy, green farmland, open ocean, and brown farmland as a function of wavelength and altitude.

Doda, D. D.↗

Electron-impact excitation of the singlet states of N2. I - The Birge-Hopfield system /b 1 pi u - X 1 Sigma g +/

Results of a study of the electron-impact excitation of the b 1 pi u state of N2, one of the singlet states thought to be excited by precipitating electrons in the auroral zones, and of its predissociation and radiative relaxation through the emission of the Birge-Hopfield band system (b 1 pi u - X 1 Sigma g +) are presented. A collimated electron beam was passed through N2 gas producing a variety of atomic states through dissociative excitation, and the radiation resulting from relaxation of these states was observed by VUV and visible-IR monochromators. Absolute emission cross sections for 11 Birge-Hopfield bands are obtained for energies from threshold to 500 eV, and used to calculate the absolute transition probabilities for BH(1, v-prime) bands and the variation of the electric dipole moment with internuclear distance. With the exception of the v-prime equals 1, 5 and 6 vibrational levels, all b 1 pi u levels are found to predissociate with a specific predissociation branching ratio greater than 0.99, representing a major source of nitrogen atoms.

Zipf, E. C.↗

An instrument to measure the solar spectrum from 170 to 3200 nm on board Spacelab

This instrument, at the present time in development, will fly on board Spacelab I in May 1983. Other flights are foreseen during the following missions. The instrument is composed of three double monochromators covering the range 170 to 3200 nm. The spectrometers have bandpasses of 1 nm up to 900 nm and 20 nm from 850 to 3200 nm with an accuracy 1/100 nm. Calibration lamps are included in the instrument to monitor any change of its sensitivity and wavelength scale.

Thuiller, G.↗

A new method for focusing and imaging X-rays and gamma-rays with diffraction crystals

Bent diffraction crystals in which the intercrystalline-plane spacing is varied as a function of position in the crystal are used to focus monochromatic radiation from a point source or parallel beam down to a point image. Conversely, radiation from a point source can be focused into an outgoing parallel beam. The Bragg angle for diffraction of monochromatic radiation will now vary as a function of position in the crystal and this new degree of freedom is used to obtain focusing and imaging of the diffracted beam. This approach to focusing and imaging is applied to the design of a large-area, high resolution X-ray telescope that is also a high resolution monochromator with the unique feature that the width of the energy increment that is diffracted can be controlled and varied during the operation of the instrument. The field can be scanned with a wide energy increment and then switched to a narrow energy increment for the high resolution work. Both transmission and reflection type diffraction crystals can be used.

Smither, R. K.↗

The solar irradiance from 200 to 330 nm

The full disk solar spectrum over the wavelength range 200-330 nm is measured with a spectral resolution of 0.12 nm. The measurement is performed by using a double monochromator pointed at the sun from a high altitude parachute. Only small corrections are required to account for atmospheric absorption. Good agreement is obtained with previously reported measurements.

Mentall, J. E.↗

An integrated control panel utilizing a programmable varistor-multiplexed dichroic liquid crystal display

Due to the conflicting demands of modern aircraft for increased systems/sensors and the decrease in cockpit panel size, weight, volume, and power, conventional discrete/dedicated methods of display and control are fast becoming obsolete. A means is sought to integrate the control and display into multifunctional programmable devices, thus giving the ability to increase system functions and yet conserve panel space. A potential solution to the control portion of the problem has come to be known as the Integrated Control Panel (ICP) approach. Flat panel display technology and controls using programmable flat panel displays with transparent capacitive touch control overlays offer the largest potential advantages. The flat panel display made of varistor-multiplexed dichroic liquid crystal (LCD) developed by GE in recent years appears to offer the ideal monochrome solution.

Whitton, I. J.↗

Evaluation of silicon-on-ceramic material for low-cost solar cells

The silicon-on-ceramic (SOC) process produces thin layers of silicon on inexpensive ceramic substrates. The layers are produced by unidirectional solidification of molten silicon, and are polycrystalline. Solar cells made from SOC material have performed with a conversion efficiency of 10.5%. In connection with the objective to improve the efficiency of SOC solar cells, an investigation was conducted to assess the relative importance of grain boundaries and impurities. In order to separate the two effects, light-beam-induced current (LBIC) measurements of the short-circuit current were made using a micron-sized light beam from a monochromator. The LBIC measurements are closely related to solar cell performance since the technique identifies the various spatial and spectral contributions to solar cell current. On the basis of the obtained results, it appears that structural defects are more important than chemical defects in limiting the performance of present SOC solar cells.

Zook, J. D.↗