SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Cl2 is Cubic alpha N2-like structured and crystallizes in the orthorhombic Cmce space group. The structure is zero-dimensional and consists of four molecular chlorine molecules. Cl is bonded in a single-bond geometry to one Cl atom. The Cl–Cl bond length is 2.01 Å.
This article presents a direct molecular simulation (DMS) of a reactive Mach 8.2 oxygen flow over a double cone geometry. The free stream conditions and article configuration generate a flow with thermal and chemical nonequilibrium, which are common attributes of hypersonic flight. This scenario was first studied experimentally at Calspan University of Buffalo Research Center’s test facility. DMS is a particle method that uses quantum mechanically derived interaction potentials to simulate molecular collisions within a flow field. Since these interaction potentials are the only modeling inputs used in the simulation, all flow features can solely be attributed to the ab initio potential energy surfaces. Hence, providing a comparison of a hypersonic ground test and numerical data anchored to quantum mechanics. The fundamental nature of DMS is leveraged to investigate molecular level mechanisms prevalent in the flow, and comparisons with lower fidelity simulations are presented to highlight the role of these first principles calculations as benchmark solutions.
This paper describes a formalism for extracting spatially varying transport coefficients from simulations of a molecular fluid in a nano channel. This approach is applied to self-diffusion of a Lennard-Jones fluid confined between two parallel surfaces. A numerical grid is laid over the domain confining the fluid, and fluid properties are projected onto the grid cells. The time correlation functions between properties in different grid cells are calculated and can be used as the basis for a fitting procedure for extracting spatially varying diffusion coefficients from the simulation. Results for the Lennard-Jones system show that transport behavior varies sharply near the liquid-solid boundary and that the changes depend on the details of the liquid-solid interaction. A quantitative difference between the reduced and detailed models is discussed. It is found that the difference could be associated with assumptions about the form of the transport equations at molecular scales in lieu of problems with the method itself. The study suggests that this approach to fitting molecular simulations to continuum equations may guide the development of appropriate coarse-grained equations to model transport phenomena at nanometer scales.
The complex interactions between different portions of a large molecule can be challenging to analyze through traditional electronic structure calculations. Moreover, standard methods cannot easily quantify the physical consequences of individual pairwise interactions inside a molecule. By creating a set of molecular fragments, we propose a composite energy method to explore changes in a molecule caused by removing selected nonbonded interactions between different molecular portions. Energies and forces are easily obtained with this composite approach, allowing geometry optimizations that lead to chemically meaningful structures that describe how the omitted interactions contribute to changes in the local geometrical minima. We illustrate the application of our new hybrid scheme by computing the influence of intramolecular hydrogen-bonding interactions in two small molecules: 1,6-(tG + G + TG + G + g – )-hexanediol and a cyclic analogue, cis-1,4-cyclohexanediol. The resulting structural and energetic changes are interpreted to yield key physical insights and quantify concepts such as “preparation energy” or “reorganization energy”. We demonstrate that the composite method can be extended to larger molecular systems by showing its application on a Si(100) surface model containing interactions between dissociated ammonia molecules on adjacent surface dimers. The scheme’s efficacy is also tested by applying it to systems having multiple intramolecular interactions, viz., 310-polyglycine and H+GPGG. Furthermore, the cooperative nature of intramolecular hydrogen bonds is explored by using interaction–deletion in 2-nitrobenzene-1,3-diol.
Numerous natural surfaces have micro/nanostructures that result in extraordinary functionality, such as superhydrophobicity, self-cleaning, antifogging, and antimicrobial properties. One such example is the cicada wing, where differences in nanopillar geometry and composition among species can impact and influence the degree of exhibited properties. To understand the relationships between surface topography and chemical composition with multifunctionality, the wing properties of Neotibicen pruinosus (superhydrophobic) and Magicicada cassinii (hydrophobic) cicadas are investigated at time points after microwave-assisted extraction of surface molecules to characterize the chemical contribution to nanopillar functionality. Electron microscopy of the wings throughout the extraction process illustrates nanoscale topographical changes, while concomitant changes in hydrophobicity, bacterial fouling, and bactericidal properties are also measured. Extract analysis reveals the major components of the nanostructures to be fatty acids and saturated hydrocarbons ranging from C17 to C44. Effects on the antimicrobial character of a wing surface with respect to the extracted chemicals suggest that the molecular composition of the nanopillars plays both a direct and an indirect role in concert with nanopillar geometry. The data presented not only correlates the nanopillar molecular organization to macroscale functional properties, but it also presents design guidelines to consider during the replication of natural nanostructures onto engineered substrates to induce desired properties.
The present work constitutes the first theoretical and kinetic modeling study of hydrazine oxidation, which may be important for burnout in ammonia-fueled combustion. The kinetics of the oxidation of N 2 H 4 , N 2 H 3 and tHNNH by molecular oxygen were investigated via a quantum chemistry/canonical transition state theory approach. Geometries and anharmonic frequencies were obtained with density functional theory, and energies from coupled cluster calculations (CCSD(T)) extrapolated to the infinite basis set limit, with corrections for core-valence electron correlation, scalar relativistic effects, and higher level correlation up to lambda coupled cluster, CCSDT(Q) Λ . The key reactions occurred on the N 2 H 4 O 2 potential energy surface, where the results indicated a fast reaction of N 2 H 3 with HO 2 via singlet adducts to yield tHNNH + H 2 O 2 and HNN(H)O + H 2 O, while reaction on the triplet surface proceeds via a bound complex followed by a tight, submerged barrier to yield N 2 H 4 + O 2 . The results were incorporated in a detailed reaction mechanism, which was used to interpret the shock tube results from Michel and Wagner (1965) on the effect of O 2 on hydrazine conversion at 1100–1400 K. The kinetic model captured qualitatively the observed behavior, but underestimated the reaction rate under oxidizing conditions. The hydrazine pyrolysis chemistry dominated conversion at reducing conditions and/or high temperature. At oxidizing conditions and intermediate temperatures (≲ 1400 K), reactions of N 2 -amines with HO 2 and O 2 were important for the oxidation rate.
Controlling the self-assembly of organic semiconductors at the nanoscale is critical for advancing high-performance electronic and photonic devices, yet it remains challenging due to their intrinsic anisotropic crystallization and sensitivity to processing conditions. Here, in this study, we demonstrate that cylindrical nanoconfinement within anodic aluminum oxide membranes provides a versatile platform to precisely tune the molecular orientation and phase behavior of the prototypical organic semiconductor 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT-C8). Combining temperature-dependent high-resolution synchrotron X-ray scattering with optical birefringence measurements, we uncover that confinement geometries (pore diameters 25–180 nm) and surface chemistry govern the emergence of distinct smectic A textures, featuring molecular layers either parallel or perpendicular to the pore axis. The competition between axial and radial smectic layering is modulated by pore size, surface hydrophilicity, and thermal history, enabling reversible control over domain orientations and transitions between liquid crystalline and crystalline states. Notably, nanoconfinement stabilizes the smectic phase over an expanded temperature range compared to bulk, while inducing complex multidomain configurations owing to geometric constraints and anchoring conditions. Our results elucidate fundamental mechanisms by which anisotropic nanoscale confinement directs the self-organization of highly conjugated organic molecules, with implications for optimizing directional charge transport and anisotropic optical responses in organic–inorganic hybrid nanoarchitectures. This study establishes nanoconfinement as a powerful strategy to engineer morphology and functional properties in organic semiconducting materials with nanoscale precision.
The packing geometry of macromolecules in complex mesophases is of key importance to self-organization in synthetic and biological soft materials. While approximate or heuristic models rely on often-untested assumptions about how flexible molecules “fit in” to distinct locations of complex assemblies, physical assemblies derive from ensembles of fluctuating conformations, obscuring the connection between mesophase geometry and the underlying arrangements. Here, we present an approach to extract and analyze features of molecular packing in diblock block copolymer (BCP) melts, a prototypical soft matter system, based on the statistical description of chain conformations in self-consistent field (SCF) theory. We show how average BCP chain trajectories in ordered morphologies can be analyzed from the SCF-derived orientational order parameter of chain segments. We use these extracted trajectories to analyze the features of local packing geometry, including chain bending and tilt, as well as the terminal boundaries that delineate distinct domains in ordered BCP morphologies. In conclusion, we illustrate this analysis by focusing on measurable features of packing frustration in 2D (columnar) and 3D (spherical and bicontinuous) morphologies, notably establishing an explicit link between chain conformations in complex morphologies and their medial geometry.
We record local optical field images of silver nanocubes (75 nm) using tip-enhanced Raman (TER) spectral imaging. The images that we observe are consistent with several recent reports from our group, but here, we demonstrate sub-2 nm spatial resolution in local optical field nanoimaging under ambient laboratory conditions. This is achieved by scanning the substrate (nanocube on Si) relative to a 4-thiobenzonitrile (TBN)-functionalized Ag-coated TER probe. The spatial resolution that we obtain necessitates that only a few molecules govern the recorded optical response; molecular orientation becomes an important consideration in such measurements. We model the orientation through geometry optimization of a TBN molecule chemisorbed onto an Ag79 cluster (sphere with a ~1 nm diameter). Using the computed orientation of the cluster-bound molecule, we then model the optical response using formalism that accounts for the orientation of the molecule relative to vector components of the local optical fields. We find optimal agreement between experiment and theory. In effect, this work reveals the parallels between single-molecule Raman scattering and high-spatial-resolution TER spectroscopy, even when the images themselves cannot be used to visualize a single molecule in real space.
Superatoms are atomic clusters with tailored size and composition that mimic the chemistry of atoms in the periodic table. However, unlike the atoms whose chemistry is governed by their valence electron orbitals, the chemistry of superatoms is governed by their highest occupied molecular orbitals. In addition, due to their large size and non-spherical geometry, superatoms can promote unusual reactions and serve as the building blocks of cluster assembled materials with properties very different from conventional materials. This perspective highlights the unique role of superatoms in chemical and material sciences by focusing on superhalogens, which not only possess electron affinities larger than those of halogens but also can be stable when multiply charged. We discuss how these unique features of superhalogens enable noble gas atoms like argon to form chemical bonds at room temperature and zinc to exhibit an oxidation state of +3. Here, the advantages of using superhalogens in the synthesis of water-resistant materials for solar cells, halogen-free electrolytes for solid-state batteries, and multiferroic materials are also discussed.
A series of optical and electron microscopies are utilized in concert to unravel the structural, optical, and plasmonic properties of corrugated metallic tips. While the overall microscopic shapes of the tips dictate their optical resonances and plasmonic field enhancement factors, nanometric structural details govern their tip-enhanced Raman (TER) spectra and images. Using 4-thiobenzonitrile (TBN) as a molecular reporter, spatially resolved TER spectra reveal that optical rectification and molecular charging are among the prominent observables in the tip-tip TER geometry. The comparisons we provide reinforce the complexity of what otherwise may be regarded as sharp tip probes. We show the spurious appearance of anions is driven by highly localized resonances that appear as a result of surface corrugation and their manifestation throughout the course of TER nano-spectroscopy complicates spectral assignments, particularly in works aimed at understanding plasmon-enhanced/induced chemical transformations through enhanced Raman spectroscopy and imaging. Overall, nanoscale spatial variations in the TERS spectra suggest that the tip-tip geometry sustains junction plasmons that appear very different from what may be expected from the hybridization of the bulk tip resonances.
Predicting the binding affinity of ligands to protein pockets is key in the drug design pipeline. The flexibility of ligand-pocket motifs arises from a range of attractive and repulsive electronic interactions during binding. Accurately accounting for all interactions requires robust quantum-mechanical (QM) benchmarks, which are scarce for ligand-pocket systems. Additionally, disagreement between “gold standard” Coupled Cluster (CC) and Quantum Monte Carlo (QMC) methods casts doubt on many benchmarks for larger non-covalent systems. We introduce the “QUantum Interacting Dimer” (QUID) benchmark framework containing 170 non-covalent (non-)equilibrium systems modeling chemically and structurally diverse ligand-pocket motifs. Symmetry-adapted perturbation theory shows that QUID broadly covers non-covalent binding motifs and energetic contributions. Robust binding energies are obtained using complementary CC and QMC methods, achieving agreement of 0.5 kcal/mol. The benchmark data analysis reveals that several dispersion-inclusive density functional approximations provide accurate energy predictions, though their atomic van der Waals forces differ in magnitude and orientation. Contrarily, semiempirical methods and empirical force fields require improvements in capturing non-covalent interactions (NCIs) for out-of-equilibrium geometries. The wide span of NCIs, highly accurate interaction energies, and analysis of molecular properties take QUID beyond the “gold standard” for QM benchmarks of ligand-protein systems.
While industrial-grade Yb-based amplifiers have become very prevalent, their limited gain bandwidth has created a large demand for robust spectral broadening techniques that allow for few-cycle pulse compression. In this work, we perform a comparative study between several atomic and molecular gases as media for spectral broadening in a hollow-core fiber geometry. Exploiting nonlinearities such as self-phase modulation, self-steepening, and stimulated Raman scattering, we explore the extent of spectral broadening and its dependence on gas pressure, the critical power for self-focusing, and the optimal regime for few-cycle pulse compression. Using a 3-mJ, 200-fs input laser pulses, we achieve 17 fs, few-cycle pulses with 80% fiber energy transmission efficiency. The optimal parameters can be scaled for higher or lower input pulse energies with appropriate gas parameters and fiber geometry.
Rare earth metals (REMs) are the key functioning material found in microelectronics, advanced batteries, and high-efficiency electrical motors. Current methods for producing REMs require high temperatures (i.e. energy intensive) and produce an abundance of hazardous fluoride waste. Room temperature ionic liquids (RTILs) are an ideal alternative electrolyte because they allow for a low-temperature, energy-efficient electrochemical process. RTIL properties such as viscosity and conductivity determine how effective they can be in this process. Since viscosity is directly related to both intra and intermolecular forces, this study sets out to investigate two RTILs-Trihexyltetradecylphosphonium dicyanamide (Cyphos 105) and Trihexyltetradecylphosphonium bistrifimide (Cyphos 109) and their interactions. Results from 2-dimensional nuclear magnetic resonance (2D NMR) spectroscopy show that there is an interaction between the tetradecyl tail and the phosphorus atom of the Cyphos RTIL. In order to establish whether this is an intra or an inter-molecular interaction, DFT-based computational calculations were performed to determine the optimized geometry. Calculations were done both in the gas phase and with propylene carbonate as an augmenting solvent. Preliminary results show that there is minimal intramolecular interaction between the tetradecyl tail and the phosphorus atom of the RTILs, and that the interaction seen in the 2D NMR experiment is likely of an intermolecular nature instead.
In mixed quantum-classical nonadiabatic molecular dynamics methods, the anchoring of the electronic wave function to a single nuclear geometry results in both quantitative and qualitative errors in the dynamics. In the context of both Ehrenfest and trajectory surface hopping methods, methods for incorporating decoherence are widely used to eliminate these errors. However, the accuracy of these methods often depends strongly on the parameterization of the decoherence time and/or other related quantities. Here, we present a refinement of the recently introduced collapse to a block (TAB) scheme for incorporating decoherence into Ehrenfest dynamics. The proposed approach incorporates an approximation to the history of the population dynamics and treats the coherence decay as Gaussian, rather than exponential. This method uses parameters that can be obtained from first principles, rather than empirical fitting. Application to one-dimensional models indicates excellent agreement with numerically exact simulations. We also introduce a second refinement to the TAB method: a robust linear least-squares algorithm for determining collapse probabilities.
Molecular excitons, which are excitations delocalized over multiple dyes in a wavelike manner, are of interest for a wide range of applications, including quantum information science. Numerous studies have templated a variety of synthetic dyes via a DNA scaffold to induce dye aggregation to create molecular excitons upon photoexcitation. Dye aggregate optical properties are critically dependent on relative dye geometry and local environment; therefore, an understanding of dye-dye and DNA-dye interactions is critical for advancing toward more complex DNA-dye systems. The extensively studied DNA Holliday junction (HJ) and less-studied double-crossover (DX) tile motif are fundamental test beds for designing complex and ultimately modular DNA-dye architectures. Here, we report the first study of single-linked squaraine dye aggregation and exciton delocalization on a larger and more stable (compared with the HJ) DX tile motif. We first highlight a few DNA-dye constructs that support single dyes and aggregates with distinct optical properties that are both tunable—through sample design, buffer conditions, and heat treatment—and robust to environment changes, including transfer to solid phase. Next, we assess several experimental and design considerations that demonstrate directed dye-driven assembly of a novel double-tile DNA configuration. Our results demonstrate that single-linked squaraine dyes templated to DX tiles provide a viable research path to design and evaluate dye aggregate networks that support exciton delocalization. We include herein the first report of exciton delocalization in the solid phase in a DNA-dye construct. Additionally, our findings indicate that dye aggregation impacts the assembly of the DNA-dye construct, and, in some cases, thereby cooperates with the DNA to determine a final robust system configuration. Finally, we show that a controlled annealing schedule can be employed to promote the homogeneous assembly of DNA-dye constructs. The findings in this study contribute to the understanding of DNA-dye systems and the relevant factors involved in their directed assembly to achieve specific constructs with desirable properties.
Abstract Tomographic volumetric additive manufacturing (VAM) produces arbitrary 3D geometries by exposure of a rotating volume of photopolymer resin to tomographically‐patterned illumination. This enables high speed, layer‐less printing of parts from a wide range of photopolymers not amenable to layer‐by‐layer processes. Since the entire geometry is produced at once over the course of a few seconds to minutes, molecular diffusion length scales become significant to the printing process. Understanding these molecular reaction and diffusion processes is imperative for advancing VAM to a usable technology. These processes are experimentally very difficult to monitor and measure. Herein, VirtualVAM ‐ a simulation framework for modeling the tomographic VAM process, is developed and experimentally validated. VirtualVAM simulates reaction, diffusion, and heat generation processes over the course of a print with single‐voxel resolution. From a few experimentally‐determined input parameters and a set of images for projection, VirtualVAM is able to generate a large spatio‐temporal data set for any given tomographic VAM print. Using VirtualVAM, a number of experimentally‐unattainable aspects of the VAM process are investigated such as single‐voxel conversion profiles, effect of molecular oxygen, and stopping time determination. VirtualVAM also enables the optimization of exposure patterns to further improve contrast between in‐part and out‐of‐part delivered dose.
In atom probe tomography of molecular organic materials, field ionization of either entire molecules or molecular fragments can occur, but the mechanism governing this behavior was not previously understood. This work explains when a doubly ionized small molecule organic material is expected to undergo fragmentation. Here, we find that multiple detection events arising from post-ionization fragmentation of a parent molecular dication into two daughter ions is well explained by the free energy and geometries of the molecules computed using density functional theory. Of the systems studied, exergonic free energies for formation of the daughter ions, smaller activation energies for dissociation, and increases in bond length are all found to be quantitative predictors for ion fragmentation. This work expands the applicability of atom probe tomography to organic materials by increasing the fundamental understanding of processes occurring during this analysis technique.