Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “isostatic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Preparation of iodine-bearing waste forms for hot isostatic pressing

Oak Ridge National Laboratory (ORNL) has prepared a new set of iodine-bearing sorbents. The sorbent materials used for this activity were supplied by IONEX (NexSorb-99) or C&CS (AC6120-7%). Metal canisters were previously prepared by ORNL in 2022. They are 2 in. long by 1.5 in. in diameter and are made of 316 stainless steel.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Manufacture of low carbon astroloy turbine disk shapes by hot isostatic pressing. Volume 2, project 1

The performance of a hot isotatic pressed disk installed in an experimental engine and exposed to realistic operating conditions in a 150-hour engine test and a 1000 cycle endurance test is documented. Post test analysis, based on visual, fluorescent penetrant and dimensional inspection, revealed no defects in the disk and indicated that the disk performed satisfactorily.

Eng, R. D.↗

Development of a high strength hot isostatically pressed /HIP/ disk alloy, MERL 76

A nickel-based powder metal disk alloy developed for use in advanced commercial gas turbines is described. Consideration is given to final alloy chemistry modifications made to achieve a desirable balance between tensile strength and stress rupture life and ductility. The effects of post-consolidation heat treatment are discussed, the preliminary mechanical properties obtained from full-scale turbine disks are presented.

Evans, D. J.↗

Hot isostatic pressing of silicon nitride Sisub3n4 containing zircon, or zirconia and silica

A hydrothermal synthesis apparatus with a 10 KB cylinder was used to obtain a sintered body of silicon nitride. The sintering auxiliary agents used were zircon (ZrSiO4) and a mixture of zirconia (ZrO2) and silica (SiO2). Experiments were conducted with the amounts of ZrSi04 or ArO2 and SiO2 varying over a wide range and the results compared to discover the quantity of additive which produced sintering in silicon nitride by the hot pressing method.

Somiya, S.↗

Lake Bonneville - Constraints on lithospheric thickness and upper mantle viscosity from isostatic warping of Bonneville, Provo, and Gilbert stage shorelines

Data collected from three deformed shorelines of Lake Bonneville (the Bonneville, Provo, and Gilbert shorelines) are used to constrain the effective elastic lithospheric thickness to 23 + or - 2 km, the mantle viscosity to (1.2 + or - 0.2) x 10 to the 20th Pa sec, and the depth to a significant viscosity increase to no less than 300 km. A modification of the earth model of Nakiboglu and Lambeck (1982, 1983) is used for the calculations, and the water load is computed at each time step from a digital terrain model and a specified lake elevation. Differences noted between the observed and computed shoreline elevations indicate a regional tilt down to the NE of about 6 x 10 to the -5th, which is suggested to be due to collapse of the peripheral bulge formed by the Laurentide ice sheet.

Bills, Bruce G.↗

The influence of high thermal gradient casting, hot isostatic pressing and alternate heat treatment on the structure and properties of a single crystal nickel base superalloy

A development program has been conducted to improve the cyclic properties of the PWA 1480 single-crystal superalloy by reducing or entirely eliminating casting porosity at fatigue-initiation sites, through the use of improved casting process parameters and HIPing; potential mechanical property improvements in a high-pressure hydrogen environment were also sought in alternatives to the standard coating and heat-treatment cycle. High thermal gradient casting was found to yield a reduction in overall casting porosity density and pore sizes. The most dramatic mechanical property improvement resulted from HIPing.

Fritzemeier, L. G.↗

Glacio-isostatic crustal movements caused by historical volume change of the Vatnajokull ice cap, Iceland

Measurements of the lake level of Lake Langisjor at the SW edge of the Vatnajokull ice cap indicate a tilt of 0.26 +/- 0.06 microrad/yr away from the ice cap in the years of 1959-1991. The tilt is too large to be explained as an elastic Earth response to ice retreat this century, or to be caused by change in the gravitational pull of the ice cap, but it can be explained by sub-lithospheric viscous adjustment. Regional subsidence in historical times in SE Iceland can similarly be attributed to viscous adjustment resulting from the increased load of Vatnajokull during the Little Ice Age. The inferred sublithospheric viscosity is 1 x 10 exp 18 - 5 x 10 exp 19 Pa s.

Sigmundsson, Freysteinn↗

A spectral formalism for computing three-dimensional deformations due to surface loads. 2: Present-day glacial isostatic adjustment

Using a spherically symmetric, self-gravitating, linear viscoelastic Earth model, we predict present-day three-dimensional surface deformation rates and baseline evolutions arising as a consequence of the late Pleistocene glacial cycles. In general, we use realistic models for the space-time geometry of the final late Pleistocene deglaciation event and incorporate a gravitationally self-consistent ocean meltwater redistribution. The predictions of horizontal velocity presented differ significantly, in both their amplitude and their spatial variation, from those presented in earlier analysis of others which adopted simplified models of both the late Pleistocene ice history and the Earth rheology. An important characteristic of our predicted velocity fields is that the melting of the Laurentide ice sheet over Canada is capable of contributing appreciably to the adjustment in Europe. The sensitivity of the predictions to variations in mantle rheology is investigated by considering a number of different Earth models, and by computing appropriate Frechet kernels. These calculations suggest that the sensitivity of the deformations to the Earth's rheology is significant and strongly dependent on the location of the site relative to the ancient ice sheet. The effects on the predictions of three-dimensional deformation rates of altering the ice history or adopting approximate models for the ocean meltwater redistribution have also been considered and found to be important (the former especially so). Finally, for a suite of Earth models we provide predictions of the velocity of a number of baselines in North America and Europe. We find that, in general, both radial and tangential motions contribute significantly to baseline length changes, and that these contributions are a strong function of the Earth model. We have, furthermore, found a set of Earth models which, together with the ICE-3G deglaciation chronology, produce predictions of baseline length changes that are consistent with very long baseline interferometry measurements of baselines within Europe.

Mitrovica, J. X.↗