Results for “interlayer” — Page 9

DOE OSTI2020

Stable and Efficient Methylammonium–, Cesium–, and Bromide–Free Perovskite Solar Cells by In–Situ Interlayer Formation

The vast majority of high–performance perovskite solar cells (PSCs) are based on multi–cation mixed–anion compositions incorporating methylammonium (MA) and bromide (Br). Nevertheless, the thermal instability of MA and the tendency of mixed halide compositions to phase segregate limit the long–term stability of PSCs. However, reports of MA–free and/or Br–free compositions are rare in the community since their performance is generally inferior. Here, a strategy is presented to achieve highly efficient and stable PSCs that are altogether cesium (Cs)–free, MA–free and Br–free. An antisolvent quenching process is used to in–situ deposit a polymeric interlayer to promote the growth of phase–pure formamidinium lead tri–iodide perovskite crystals with reduced defect density and to assist in photo–excited charge extraction. Here, the PSCs developed are among the best–performing reported for such compositions. Moreover, the PSCs show superior stability under continuous exposure to both illumination and 85 °C heat.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Cation-Diffusive Carbon Interlayers Stabilize Na Metal and Double the Current in Na-S Redox-Flow Batteries for Grid-Scale Energy Storage

The sodium-sulfur nonaqueous redox-flow batteries (Na-S NARFBs) using earth-abundant elements are highly attractive due to the low material cost and improved energy density for grid-scale energy storage. However, the low current performance, poor Na0/Na+ redox kinetics, and Na dendrite growth pose severe challenges. We introduce cation-diffusive layers (CDLs): thin and Na+ affinitive interlayers at the Na anode that direct Na+ transport and stabilize Na deposition. Benchmarking three archetypal materials—carbon paper (CP), glass microfiber paper (GF), and foam—across Na-Na and Na-Cu, and Na-S cells identifies CP as the optimum. CP reduces symmetric cell overpotential by more than 70%, achieves 98% Na plating-stripping efficiency, and doubles the Na-S cell current density from 0.5 to 1.0 mA cm−2 without sacrificing capacity or efficiency. Ex situ electrochemical and SEM/XPS analysis, combined with molecular dynamics (MD) studies, reveal that electron-rich carbon fibers disperse supporting salt aggregates, enrich near-surface Na+ density, and create ion transport pathways for fast Na0/Na+ exchange while mitigating membrane degradation. Because of the ion-centric mechanism, CDLs can be generalized to other metal-anode designs. Further, this work establishes CDL design rules—cationic affinity and appropriate micro/nanostructure—as a simple, scalable route to high-current, durable metal-anode flow batteries.

Wu, Wenda [ORNL] (ORCID:000900033307687X)↗

DOE OSTI2022

Bioinspired Macrocyclic Molecule Supported Two‐Dimensional Lamellar Membrane with Robust Interlayer Structure for High‐Efficiency Nanofiltration

Abstract 2D lamellar membranes (2DLMs) are used for efficient desalination and nanofiltration. However, weak interactions between adjacent stacked nanosheets result in susceptibility to swelling that limits practical applicability. Inspired by the super adhesion of multi‐point suction cups on octopus tentacles, a 2DLM is constructed from Ti 3 C 2 T x MXene supported by the macrocyclic “multi‐point” molecule cucurbit[5]uril (CB5) and demonstrated for nanofiltration of methyl blue (MB) and enrichment of uranyl carbonate. Experimental results and density functional theory calculations indicate that CB5 rivets to the surface of the nanoflakes through strong stable interactions between its multiple binding sites and surface hydroxyl functional groups on MXene nanosheets. This novel 2DLM exhibits excellent nanofiltration performance (69 L m −2 h −1 bar −1 permeance with 93.6% rejection for MB) and can be recycled at least 30 times without significant degradation. The 2DLM exhibits excellent swelling resistance at high salinity, with a demonstration of selective enrichment of uranyl carbonate from artificial water and natural seawater. The results provide a new strategy for constructing highly stable 2DLMs with interlayer spacing controllable from sub‐nano to nanometer scales, for size‐selective sieving of molecules and ions, high‐efficiency nanofiltration, and other applications.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2023

Suppressing Universal Cathode Crossover in High‐Energy Lithium Metal Batteries via a Versatile Interlayer Design**

Abstract The universal cathode crossover such as chemical and oxygen has been significantly overlooked in lithium metal batteries using high‐energy cathodes which leads to severe capacity degradation and raises serious safety concerns. Herein, a versatile and thin (≈25 μm) interlayer composed of multifunctional active sites was developed to simultaneously regulate the Li deposition process and suppress the cathode crossover. The as‐induced dual‐gradient solid‐electrolyte interphase combined with abundant lithiophilic sites enable stable Li stripping/plating process even under high current density of 10 mA cm −2 . Moreover, X‐ray photoelectron spectroscopy and synchrotron X‐ray experiments revealed that N‐rich framework and CoZn dual active sites can effectively mitigate the undesired cathode crossover, hence significantly minimizing Li corrosion. Therefore, assembled lithium metal cells using various high‐energy cathode materials including LiNi 0.7 Mn 0.2 Co 0.1 O 2 , Li 1.2 Co 0.1 Mn 0.55 Ni 0.15 O 2 , and sulfur demonstrate significantly improved cycling stability with high cathode loading.

Xie, Chuyi↗

DOE OSTI2024

Electrochemical Capacitance Traces with Interlayer Spacing in Two‐dimensional Conductive Metal–Organic Frameworks

Abstract Electrically conductive metal–organic frameworks (MOFs) are promising candidates for electrochemical capacitors (EC) for fast energy storage due to their high specific surface areas and potential for redox activity. To maximize energy density, traditional inorganic pseudocapacitors have utilized faradaic processes in addition to double‐layer capacitance. Although conductive MOFs are usually comprised of redox active ligands which allow faradaic reactions upon electrochemical polarization, systematic studies providing deeper understanding of the charge storage processes and structure‐function relationships have been scarce. Here, we investigate the charge storage mechanisms of a series of triazatruxene‐based 2D layered conductive MOFs with variable alkyl functional groups, Ni 3 (HIR 3 ‐TAT) 2 (TAT=triazatruxene; R=H, Et, n ‐Bu, n ‐Pent). Functionalization of the triazatruxene core allows for systematic variation of structural parameters while maintaining in‐plane conjugation between ligands and metals. Specifically, R groups modulate interlayer spacing, which in turn shifts the charge storage mechanism from double‐layer capacitance towards pseudocapacitance, leading to an increase in molar specific capacitance from Ni 3 (HIH 3 ‐TAT) 2 to Ni 3 (HIBu 3 ‐TAT) 2 . Partial exfoliation of Ni 3 (HIBu 3 ‐TAT) 2 renders redox active ligand moieties more accessible, and thus increases the dominance of faradaic processes. Our strategy of controlling charge storage mechanism through tuning the accessibility of redox‐active sites may motivate further design and engineering of electrode materials for EC.

Su, Alice Y.↗

DOE OSTI2023

Suppressing Universal Cathode Crossover in High‐Energy Lithium Metal Batteries via a Versatile Interlayer Design**

Abstract The universal cathode crossover such as chemical and oxygen has been significantly overlooked in lithium metal batteries using high‐energy cathodes which leads to severe capacity degradation and raises serious safety concerns. Herein, a versatile and thin (≈25 μm) interlayer composed of multifunctional active sites was developed to simultaneously regulate the Li deposition process and suppress the cathode crossover. The as‐induced dual‐gradient solid‐electrolyte interphase combined with abundant lithiophilic sites enable stable Li stripping/plating process even under high current density of 10 mA cm −2 . Moreover, X‐ray photoelectron spectroscopy and synchrotron X‐ray experiments revealed that N‐rich framework and CoZn dual active sites can effectively mitigate the undesired cathode crossover, hence significantly minimizing Li corrosion. Therefore, assembled lithium metal cells using various high‐energy cathode materials including LiNi 0.7 Mn 0.2 Co 0.1 O 2 , Li 1.2 Co 0.1 Mn 0.55 Ni 0.15 O 2 , and sulfur demonstrate significantly improved cycling stability with high cathode loading.

25 ENERGY STORAGE↗

DOE OSTI2024

Electrochemical Capacitance Traces with Interlayer Spacing in Two‐dimensional Conductive Metal–Organic Frameworks

Abstract Electrically conductive metal–organic frameworks (MOFs) are promising candidates for electrochemical capacitors (EC) for fast energy storage due to their high specific surface areas and potential for redox activity. To maximize energy density, traditional inorganic pseudocapacitors have utilized faradaic processes in addition to double‐layer capacitance. Although conductive MOFs are usually comprised of redox active ligands which allow faradaic reactions upon electrochemical polarization, systematic studies providing deeper understanding of the charge storage processes and structure‐function relationships have been scarce. Here, we investigate the charge storage mechanisms of a series of triazatruxene‐based 2D layered conductive MOFs with variable alkyl functional groups, Ni 3 (HIR 3 ‐TAT) 2 (TAT=triazatruxene; R=H, Et, n ‐Bu, n ‐Pent). Functionalization of the triazatruxene core allows for systematic variation of structural parameters while maintaining in‐plane conjugation between ligands and metals. Specifically, R groups modulate interlayer spacing, which in turn shifts the charge storage mechanism from double‐layer capacitance towards pseudocapacitance, leading to an increase in molar specific capacitance from Ni 3 (HIH 3 ‐TAT) 2 to Ni 3 (HIBu 3 ‐TAT) 2 . Partial exfoliation of Ni 3 (HIBu 3 ‐TAT) 2 renders redox active ligand moieties more accessible, and thus increases the dominance of faradaic processes. Our strategy of controlling charge storage mechanism through tuning the accessibility of redox‐active sites may motivate further design and engineering of electrode materials for EC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Investigation of Interlayer Dielectric in BaTiO 3 /III–Nitride Transistors

In this paper, the impact of varying the thickness of the Al 2 O 3 interlayer dielectric on the electrical characteristics of BaTiO 3 /III-nitride transistors is investigated. In the findings, it is revealed that a minimum thickness of 8 nm for the Al 2 O 3 layer is crucial to maintain high device performance and protect against sputtering-induced damage during BaTiO 3 deposition. The fabricated BaTiO 3 /Al 2 O 3 /AlGaN/GaN high electron mobility transistors exhibit exceptional electrical properties, including a maximum current density of 700 mA mm –1 , an on-resistance of 5 Ω mm, an I ON /I OFF ratio of 10 7 , a subthreshold slope of 119 mV dec –1 , and significantly reduced gate leakage current. The devices with the optimal 8 nm Al 2 O 3 thickness demonstrates excellent agreement between theoretical and experimental values for effective mobility, achieving a value of 1188 cm 2 V –1 ·s at a 2D electron gas density of 10 13 cm –2 . Furthermore, in the study, it is confirmed that increasing the Al 2 O 3 thickness also improves the quality of interface charge density, as evidenced by the results obtained from capacitance–voltage measurements. In these findings, the critical role of controlling the Al 2 O 3 thickness in optimizing the electrical characteristics and overall performance of BaTiO 3 /III-nitride transistors are highlighted.

42 ENGINEERING↗

DOE OSTI2021

Interferometric 4D-STEM for Lattice Distortion and Interlayer Spacing Measurements of Bilayer and Trilayer 2D Materials

Van der Waals materials composed of stacks of individual atomic layers have attracted considerable attention due to their exotic electronic properties that can be altered by, e.g., manipulating the twist angle of bilayer materials or the stacking sequence of trilayer materials. To fully understand and control the unique properties of these few-layer materials, a technique that can provide information about their local in-plane structural deformations, twist direction, and out-of-plane structure is needed. In principle, interference in overlap regions of Bragg disks originating from separate layers of a material encodes 3D information about the relative positions of atoms in the corresponding layers. Here, an interferometric 4D scanning transmission electron microscopy technique is described that utilizes this phenomenon to extract precise structural information from few-layer materials with nm-scale resolution. It is demonstrated how this technique enables measurement of local pm-scale in-plane lattice distortions as well as twist direction and average interlayer spacings in bilayer and trilayer graphene, and therefore provides a means to better understand the interplay between electronic properties and precise structural arrangements of few-layer 2D materials.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Impact of hydrogen bonding pendant groups in polymer grafted nanoparticles on interlayer adhesion and mechanical properties in material extrusion printing

The addition of nanoparticles or copolymer grafted nanoparticles (CPGNPs) to polymeric matrices greatly improves thermomechanical properties of the resulting nanocomposite, but corresponding studies of nanocomposite systems created by 3D printing are few, especially in the realm of functional polymeric materials. Here we describe how silica nanoparticle-grafted, random copolymers of poly(methyl methacrylate-random-2-uriedo-[1H]-pyrimidinone methacrylate) (P(MMA-r-UPyMA) dramatically increases the mechanical properties of poly(methyl methacrylate) (PMMA) based nanocomposite specimens created by melt extrusion printing. Most notably, when these novel CPGNPs are combined with PMMA matrix chains via a solution-based process, printed specimens containing only 0.5 wt% additive show significant increases in Young’s modulus (90%), storage modulus (93%), tensile modulus (148%) and ultimate tensile strength (110%). These improvements are ascribed to strengthening of adhesion across interfaces due to multi-point hydrogen bonding between UPyMA groups, the reinforcement effect of the P(MMA-r-UPyMA)-grafted silica nanoparticles, as well as hydrogen bonding interactions and entanglements between graft and matrix chains. Imaging of fracture surfaces after tensile testing reveals that in comparison to nanocomposites created by simple mechanical mixing of solids, the solution-casting process improves the dispersion of nanoparticles and reduces the void spaces between printed roads. These studies demonstrate that introducing functionality into polymer grafts, such as hydrogen bonding interactions, and intimate mixing of polymer-modified nanomaterials can greatly improve interlayer adhesion and mechanical properties, thereby advancing this method of polymer additive manufacturing

36 MATERIALS SCIENCE↗

DOE OSTI2024

Self-healing carbon fiber/epoxy laminates with particulate interlayers of a low-melting-point alloy

In order to prolong the service life of fiber-reinforced polymer composites, the implementation of self-healing ability with the micro-encapsulated healing agent has been extensively studied. However, such microcapsule-based self-healing composites typically suffer from degraded mechanical properties due to the liquid-phase inclusions, thereby limiting their proliferation. Here, in this study, a low-melting-point alloy is utilized as the particulate inclusions of carbon fiber/epoxy laminated composites. Field's Metal particles (melting point: 62 °C) are distributed between woven carbon fiber preforms followed by the resin impregnation to realize laminated composites with a Field's Metal-enhanced interlayer(s). The resulting laminated composites demonstrate the autonomic repair of interlaminar failure with a 40 % of healing efficiency. Most of all, the mechanical properties of these self-healing laminated composites are comparable to the conventional laminated composites attributed to the rigid inclusions that can be compressed to increase the fiber volume. Since the Field's Metal particle inclusions can bestow polymer composites with self-healing ability and the potential increase in mechanical properties, Field's Metal-enhanced fiber-reinforced polymer composites are expected to unlock the practical utility of self-healing composites.

A. polymer-matrix composites (PMCs)↗

DOE OSTI2020

Efficient Construction of a C 60 Interlayer for Mechanically Robust, Dendrite-free, and Ultrastable Solid-State Batteries

Interfacial instability between solid electrolytes (SEs) and lithium metal remains a daunting challenge for solid-sate batteries. Here, a conformal C 60 interlayer is efficiently constructed on Li 1.5 Al 0.5 Ge 1.5 (PO 4 ) 3 (LAGP) SEs by physical vapor deposition, and an ideal interfacial contact is achieved via forming an ionically conducting matrix of LixC60 with lithium metal. The obtained Li x C 60 is beneficial to hinder the growth of lithium dendrites at interface and release the local stress during the lithiation and delithiation. As a result, the Li/LAGP-C 60 /Li symmetric cells demonstrate ultra-stable cycling performance for more than 4,500 h at a current density of 0.034 mA cm -2 . The Li/LAGP-C 60 /LiFePO 4 full cells deliver a reversible capacity of 152.4 mAh g -1 at room temperature, and the capacity retention rate is 85% after more than 100 cycles. This work provides a feasible and scalable strategy to improve the SEs/Li interface for high-performance solid-state batteries.

25 ENERGY STORAGE↗

DOE OSTI2025

Bonding of vanadium- and Iron-based alloys as interlayers for plasma-facing and structural materials in fusion systems

Vanadium alloys and FeCrAl were investigated as interlayers between tungsten and reduced activation ferritic martensitic steel for fusion system components to avoid formation of intermetallic phase at operating temperatures between 550 and 1100 °C, while maintaining a body centered cubic phase throughout the interface. Physical and mechanical properties need to be graded between tungsten and steel, but recent results showed a significant hardness increase at the FeCrAl to vanadium alloy interface. Here, a sintered sample of these alloys was annealed for extended time, and the microstructure was investigated to provide a better understanding of the phenomena. A comparison with an additively manufactured interface of the same material is provided. An unexpected L2 1 intermetallic phase formation has been revealed using microscopy and synchrotron techniques and will inform future additive manufacturing approaches of the interface. A Cr layer interface as a preliminary solution was proposed between the Vanadium alloy and FeCrAl alloy interface.

Additive manufacturing↗

DOE OSTI2026

Hybridization of Excited Interlayer Excitons with Intralayer Excitons in Transition-Metal Dichalcogenide Heterostructures: Interplay of Orbital and Structural Symmetry

Hybridization between interlayer exciton (ILX) and intralayer excitons offers a powerful route to engineer light–matter interactions in transition-metal dichalcogenide (TMDC) heterostructures, yet the underlying mechanism and selection rules remain elusive. Here we probe exciton hybridization in MoTe2/MoSe2 heterobilayers under a tunable out-of-plane electric field and observe distinct avoided crossings in the electric-field dependent reflection spectra. We associate them with coupling between excited ILX states, including the 2p and 2s Rydberg states, and MoTe2 intralayer exciton. Supported by ab initio GW plus Bethe-Salpeter equation (GW-BSE) calculations, we identify the hybridizing states and establish optical selection rules based on the effective angular momentum of the exciton states. These findings highlight the role of excitonic binding in the observed hybridization, rather than that of simple band-mixing models, and provide a new pathway for brightening high-energy dark states.

Yao, Helen [Department of Materials Science and En↗

DOE OSTI2021

Interlayer Triplet-Sensitized Luminescence in Layered Two-Dimensional Hybrid Metal-Halide Perovskites

In this work, we review an emerging class of 2D layered metal-halide perovskites that exhibit important photophysical behavior involving inorganic exciton-to-molecular triplet energy flow. These novel systems have potential to impact several energy-related fields and processes, including optoelectronics, photon upconversion strategies, and triplet-based photocatalysis. Early studies provided initial guidance and revealed several intriguing questions that more recent developments, in terms of both expanded and diversified compositional tuning and more sophisticated characterization, have begun to answer. These questions center around the delicate interplay between physical and electronic structure that is perturbed by choice of perovskite structural motif and organic spacer properties. In addition to their distinct natures, the energy offsets between the metal-halide and molecular excitons can be leveraged for a variety of unique effects and emergent properties, including fast interlayer energy transfer. We review the key advances with an eye toward strategies for controlling photophysical outcomes based on structure-energy-function relationships.

14 SOLAR ENERGY↗

DOE OSTI2024

Effective Modulation of Interlayer Excitons in WSe 2 /WS 2 Heterostructures by Plasmon–Exciton Interaction

Effective charge transfer and carrier separation at the interface are paramount for optimizing the performance of devices based on van der Waals heterostructures. In this investigation, surface plasmons generated by gold nanoparticles are employed to modulate the photocarrier dynamics in WSe 2 /WS 2 heterostructures. The results of pump-probe measurements reveal that the efficiency of carrier transfer across the WSe 2 /WS 2 heterostructure interface can be significantly enhanced via energy transfer mechanisms mediated by gold plasmons. Moreover, the electric field engendered by the plasmonic oscillations can modulate the dipole moment of the interlayer exciton. These well-aligned excitons avoid the annihilation and the extension of the lifetime of the excitons with increased pump power is realized by screening effect. The findings presented herein offer valuable insights for the active manipulation of charge transfer and extend our understanding of the integral role played by plasmon-exciton coupling in mediating charge separation in van der Waals heterostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Interlayer gap widened $α$-phase molybdenum trioxide as high-rate anodes for dual-ion-intercalation energy storage devices

Employing high-rate ion-intercalation electrodes represents a feasible way to mitigate the inherent trade-off between energy density and power density for electrochemical energy storage devices, but efficient approaches to boost the charge-storage kinetics of electrodes are still needed. Here, we demonstrate a water-incorporation strategy to expand the interlayer gap of α-MoO 3 , in which water molecules take the place of lattice oxygen of α-MoO 3 . Accordingly, the modified α-MoO 3 electrode exhibits theoretical-value-close specific capacity (963 C g –1 at 0.1 mV s –1 ), greatly improved rate capability (from 4.4% to 40.2% at 100 mV s –1 ) and boosted cycling stability (from 21 to 71% over 600 cycles). A fast-kinetics dual-ion-intercalation energy storage device is further assembled by combining the modified α-MoO 3 anode with an anion-intercalation graphite cathode, operating well over a wide discharge rate range. Our study sheds light on a promising design strategy of layered materials for high-kinetics charge storage.

25 ENERGY STORAGE↗

DOE OSTI2022

Localized interlayer excitons in MoSe 2 –WSe 2 heterostructures without a moiré potential

Interlayer excitons (IXs) in MoSe 2 –WSe 2 heterobilayers have generated interest as highly tunable light emitters in transition metal dichalcogenide (TMD) heterostructures. Previous reports of spectrally narrow (<1 meV) photoluminescence (PL) emission lines at low temperature have been attributed to IXs localized by the moiré potential between the TMD layers. We show that spectrally narrow IX PL lines are present even when the moiré potential is suppressed by inserting a bilayer hexagonal boron nitride (hBN) spacer between the TMD layers. We compare the doping, electric field, magnetic field, and temperature dependence of IXs in a directly contacted MoSe 2 –WSe 2 region to those in a region separated by bilayer hBN. The doping, electric field, and temperature dependence of the narrow IX lines are similar for both regions, but their excitonic g-factors have opposite signs, indicating that the origin of narrow IX PL is not the moiré potential.

36 MATERIALS SCIENCE↗