Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “interatomic potential development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Optimal utilization of total elastic scattering cross section data for the determination of interatomic potentials

The problem of inversion is considered in relation to absolute total cross sections Q(v) for atom-atom collisions and their velocity dependence, and the glory undulations and the transition to high velocity behavior. There is a limit to the amount of information available from Q(v) even when observations of good accuracy (e.g., + or - 0.25%) are in hand over an extended energy range (from thermal energies upward by a factor of greater than 1000 in relative kinetic energy). Methods were developed for data utilization, which take full advantage of the accuracy of the experimental Q(v) measurements.

Bernstein, R. B.↗
NASA NTRSDate not supplied

Molecular dynamics simulation of effects of solutes on dislocation propagation in Ni-based superalloys

Ni-based superalloys are used in the hot sections of jet turbine engines because of their high strength, stability and resistance to oxidation. The properties of these alloys can be further optimized by adding alloying elements. Therefore, a fundamental knowledge on the effect of different elements on properties of Ni-based superalloys is required. Molecular dynamics simulation could shed light here but its application is hindered by the absence of reliable and computationally cheap semi-empirical potential of the interatomic interaction for 4 and more element alloys. We will present a new Ni-Al-Cr-Nb Finnis-Sinclair (FS) potential specially designed to simulate the dislocation propagation from to  phase. In order to construct this potential, we designed a special algorithm to incorporate the data on element partitioning in the potential development procedure. For example, it is known from experiment, that Cr is mostly present in the gamma phase. Figure 1 shows a snapshot obtained after equilibration of the model of the Ni68Al17Cr15 alloy at T=1000 K using the hybrid Monte-Carlo (MC)/molecular dynamics (MD) simulation with the developed semi-empirical potential. One can clearly see that the Cr partitioning is in agreement with the experimental data. We will discuss the developed algorithm to incorporate the solute partition data in details. Using the developed semi-empirical potential, we first investigated the effect of anti-site defects in the  phase on the single dislocation propagation. It was found that the dislocation velocity increases with the increasing of the anti-site defect concentration. This effect was attributed to smaller number of Al-Al pairs forming during the dislocation migration in the presence of the anti-site defects. Next, we investigated the effect of Nb on the dislocation pair propagation in the Kolbe mechanism. It was found that the addition of Nb leads to considerable decrease in the dislocation propagation rate. This is in agreement with the experimental data on the effect of Nb on the creep resistance of the Ni-based superalloys. We will discuss the origin of this effect.

Mikhail I. Mendelev↗
DOE OSTI2023

Uncertainty-driven dynamics for active learning of interatomic potentials

Machine learning (ML) models, if trained to data sets of high-fidelity quantum simulations, produce accurate and efficient interatomic potentials. Active learning (AL) is a powerful tool to iteratively generate diverse data sets. In this approach, the ML model provides an uncertainty estimate along with its prediction for each new atomic configuration. If the uncertainty estimate passes a certain threshold, then the configuration is included in the data set. Here we develop a strategy to more rapidly discover configurations that meaningfully augment the training data set. The approach, uncertainty-driven dynamics for active learning (UDD-AL), modifies the potential energy surface used in molecular dynamics simulations to favor regions of configuration space for which there is large model uncertainty. The performance of UDD-AL is demonstrated for two AL tasks: sampling the conformational space of glycine and sampling the promotion of proton transfer in acetylacetone. The method is shown to efficiently explore the chemically relevant configuration space, which may be inaccessible using regular dynamical sampling at target temperature conditions.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Rare Earth and Transition Metal Containing Glasses

Transition metal (TM) and rare earth (RE) ions have been incorporated into many glass systems such as silicate, phosphate, and borosilicate-based oxide glasses, as well as in halide and chalcogenide glasses, that find applications ranging from optical, photonic, and magnetic devices, solid-state battery, to nuclear waste disposal. Understanding the structural role of RE and TM in these glasses can help to develop glass compositions for targeted applications with either high-optical emission efficiency, electrical conductivity, or chemical durability. In this chapter, we first provide a general introduction of the applications and structural features of RE and TM in glasses, then the critical aspects of molecular dynamics (MD) simulations of these glasses such as interatomic potentials, structural analysis tools to study RE and TM ions in glasses and their clustering behaviors, Quantitative Structure–Property Analysis (QSPR), diffusion and dynamic property calculations, and electronic structure calculations to understand electronic defects such as charge trapping and radiation effects are introduced. Three representative case studies are presented: the first one is on MD simulations of erbium- and europium-doped silica and silicate glasses, as well as cerium doped aluminophosphate glasses, that revealed the effect of glass composition on RE ion local structure and clustering behavior. Electronic structure calculations of cerium-doped glass show how the existence of multioxidation states help to mediate radiation-induced damages caused by excited electron–hole pairs was also discussed. The second one focuses on alkali vanadophosphate glasses where the existence of two vanadium oxidation states help to provide electronic conduction in the glasses while alkali ions provide ionic conduction. MD simulations were used to understand vanadium environments and other structural aspects in the phosphate glasses, as well as the ionic transport behaviors of alkali ions. The third case study is on zirconium-containing borosilicate and aluminosilicate glasses that find wide applications in nuclear waste disposal. MD simulations help to provide structural details of zirconium ions that are validated by diffraction and EXAFS spectra. The structural information was used to interpret changes of mechanical properties and chemical durability by using QSPR and other analyses-based MD-generated structure models.

Du, Jincheng↗
DOE OSTI2025

Computational Investigation of a CO 2 Conversion Strategy via Diels–Alder Reaction in a Carbon Capture Solvent

Molecular-level insights into reactive separations are crucial for the design of new conversion pathways of carbon dioxide (CO 2 ). This work explores a postulated pathway that directs CO 2 to undergo inverse-electron-demand Diels–Alder reactions to produce heterocycles using the CO 2 chemically fixed on water-lean solvent molecules. Density functional theory calculations are applied to evaluate the lowest unoccupied molecular orbital (LUMO) energies of three types of reactants (1,3-butadiene, 1,3-cyclohexadiene, and 1,2,4,5-tetrazine) with various functional substituents. These calculations also provide a data set (5.8k data) for developing a machine learning model to efficiently predict LUMO energies. A computational screening of LUMO energies for an additional 47k diene and tetrazine candidates is performed, and a list of candidates with lowered LUMO energies by electron-withdrawing substituents is provided. These candidates are further examined by their reaction energy barriers computed from the interatomic potential or density functional theory. Two major energy barriers are identified, one for the proton transfer within the water-lean solvent and the other for the CO 2 transfer from the solvent molecule to the reactant candidate (diene or tetrazine). The functional substituents have a more significant impact on the second barrier but a very slight one on the first barrier. This exploratory work demonstrates a new possibility for guiding experimental efforts toward the chemical conversion of fixated CO 2 to value-added compounds.

Chemical reactions↗
DOE OSTI2022

Flexible machine-learning interatomic potential for simulating structural disordering behavior of Li 7 La 3 Zr 2 O 12 solid electrolytes

Batteries based on solid-state electrolytes, including Li 7 La 3 Zr 2 O 12 (LLZO), promise improved safety and increased energy density; however, atomic disorder at grain boundaries and phase boundaries can severely deteriorate their performance. Machine-learning (ML) interatomic potentials offer a uniquely compelling solution for simulating chemical processes, rare events, and phase transitions associated with these complex interfaces by mixing high scalability with quantum-level accuracy, provided that they can be trained to properly address atomic disorder. To this end, we report the construction and validation of an ML potential that is specifically designed to simulate crystalline, disordered, and amorphous LLZO systems across a wide range of conditions. The ML model is based on a neural network algorithm and is trained using ab initio data. Performance tests prove that the developed ML potential can predict accurate structural and vibrational characteristics, elastic properties, and Li diffusivity of LLZO comparable to ab initio simulations. As a demonstration of its applicability to larger systems, we show that the potential can correctly capture grain boundary effects on diffusivity, as well as the thermal transition behavior of LLZO. Here these examples show that the ML potential enables simulations of transitions between well-defined and disordered structures with quantum-level accuracy at speeds thousands of times faster than ab initio methods.

25 ENERGY STORAGE↗
NASA NTRS2002

Equivalent-Continuum Modeling With Application to Carbon Nanotubes

A method has been proposed for developing structure-property relationships of nano-structured materials. This method serves as a link between computational chemistry and solid mechanics by substituting discrete molecular structures with equivalent-continuum models. It has been shown that this substitution may be accomplished by equating the vibrational potential energy of a nano-structured material with the strain energy of representative truss and continuum models. As important examples with direct application to the development and characterization of single-walled carbon nanotubes and the design of nanotube-based devices, the modeling technique has been applied to determine the effective-continuum geometry and bending rigidity of a graphene sheet. A representative volume element of the chemical structure of graphene has been substituted with equivalent-truss and equivalent continuum models. As a result, an effective thickness of the continuum model has been determined. This effective thickness has been shown to be significantly larger than the interatomic spacing of graphite. The effective thickness has been shown to be significantly larger than the inter-planar spacing of graphite. The effective bending rigidity of the equivalent-continuum model of a graphene sheet was determined by equating the vibrational potential energy of the molecular model of a graphene sheet subjected to cylindrical bending with the strain energy of an equivalent continuum plate subjected to cylindrical bending.

Odegard, Gregory M.↗
DOE OSTI2024

Machine learning potential assisted exploration of complex defect potential energy surfaces

Abstract Atomic-scale defects generated in materials under both equilibrium and irradiation conditions can significantly impact their physical and mechanical properties. Unraveling the energetically most favorable ground-state configurations of these defects is an important step towards the fundamental understanding of their influence on the performance of materials ranging from photovoltaics to advanced nuclear fuels. Here, using fluorite-structured thorium dioxide (ThO 2 ) as an exemplar, we demonstrate how density functional theory and machine learning interatomic potential can be synergistically combined into a powerful tool that enables exhaustive exploration of the large configuration spaces of small point defect clusters. Our study leads to several unexpected discoveries, including defect polymorphism and ground-state structures that defy our physical intuitions. Possible physical origins of these unexpected findings are elucidated using a local cluster expansion model developed in this work.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Bridging the gap between simulated and experimental ionic conductivities in lithium superionic conductors

Lithium superionic conductors (LSCs) are of major importance as solid electrolytes for next-generation all-solid-state lithium-ion batteries. While ab initio molecular dynamics have been extensively applied to study these materials, there are often large discrepancies between predicted and experimentally measured ionic conductivities and activation energies due to the high temperatures and short time scales of such simulations. Here, we present a strategy to bridge this gap using moment tensor potentials (MTPs). We show that MTPs trained on energies and forces computed using the van der Waals optB88 functional yield much more accurate lattice parameters, which in turn leads to accurate prediction of ionic conductivities and activation energies for the Li 0·33 La 0·56 TiO 3 , Li 3 YCl 6 and Li 7 P 3 S 11 LSCs. NPT MD simulations using the optB88 MTPs also reveal that all three LSCs undergo a transition between two quasi-linear Arrhenius regimes at relatively low temperatures. This transition can be traced to an increase in the number and diversity of diffusion pathways, in some cases with a change in the dimensionality of diffusion. Furthermore, this work presents not only an approach to develop high accuracy MTPs, but also outlines the diffusion characteristics for LSCs which is otherwise inaccessible through ab initio computation.

25 ENERGY STORAGE↗
DOE OSTI2023

Graph neural networks predict energetic and mechanical properties for models of solid solution metal alloy phases

Here, we developed a PyTorch-based architecture called HydraGNN that implements graph convolutional neural networks (GCNNs) to predict the formation energy and the bulk modulus for models of solid solution alloys for various atomic crystal structures and relaxed volumes. We trained the GCNN surrogate model on a dataset for nickel–niobium (NiNb) generated by the embedded atom model (EAM) empirical interatomic potential for demonstration purposes. The dataset was generated by calculating the formation energy and the bulk modulus as a prototypical elastic property for optimized geometries starting from initial body-centered cubic (BCC), face-centered cubic (FCC), and hexagonal compact packed (HCP) crystal structures, with configurations spanning the possible compositional range for each of the three types of initial crystal structures. Numerical results show that the GCNN model effectively predicts both the formation energy and the bulk modulus as function of the optimized crystal structure, relaxed volume, and configurational entropy of the model structures for solid solution alloys.

36 MATERIALS SCIENCE↗
NASA NTRS1982

A study pertaining to a very low temperature hydrogen maser feasibility

Very low temperature atomic hydrogen masers were developed. The advantages over room temperature hydrogen masers include higher radiated power due to the higher beam intensities possible using low temperature techniques and the much smaller electron spin flip cross section at low temperatures, lower cavity and amplifier noise temperatures, increased stability against mechanical creep at low temperatures, and opportunities to extend H atom collision studies to low temperatures, where quantum effects and details of the interatomic potentials are much more important.

Crampton, S. B.↗
DOE OSTI2022

Fast estimation of ion-pairing for screening electrolytes: A cluster can approximate a bulk liquid

The propensity for ion-pairing can often dictate the thermodynamic and kinetic properties of electrolyte solutions. Fast and accurate estimates of ion-pairing can thus be extremely valuable for supplementing design and screening efforts for novel electrolytes. We introduce an efficient cluster model to estimate the local ion-pair potential-of-mean-force between ionic solutes in electrolytes. The model incorporates an ion-pair and a few layers of explicit solvent in a gas-phase cluster and leverages an enhanced sampling approach to achieve high efficiency and accuracy. We employ harmonic restraints to prevent solvent escape from the cluster and restrict sampling of large inter-ion distances. We develop a cluster ion-pair sampling tool that implements our cluster model and demonstrate its potential utility for screening simple and poly-electrolyte systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Development of Multicomponent EAM Potential for Ni-Based Superalloy

We initiated the development of multi-component EAM potentials for Aluminides and Carbides, key phases in Ni-based Superalloys. The goal is to utilize the MD simulation to understand the deformation dynamics that contribute to the formation of voids and creep initiation. For this purpose, we constructed the raw data from ab-initio (molecular dynamics) MD simulations fed into the potential development code and used Nickel as the base metal with the addition of a number of various elements including Aluminum, Chromium, Tungsten. We then developed the EAM potentials for the aluminide and carbide phases using the force-fitting code MEAMfit. Our generated potential reproduces the fundamental properties of the Ni3Al and Mo23C6 phases. We verified further the EAM potential through the thermal stability test at different temperatures and by reproducing the elastic constants consistent with the experimental values.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Deep learning-based quasi-continuum theory for structure of confined fluids

Predicting the structural properties of water and simple fluids confined in nanometer scale pores and channels is essential in, for example, energy storage and biomolecular systems. Classical continuum theories fail to accurately capture the interfacial structure of fluids. In this work, we develop a deep learning-based quasi-continuum theory (DL-QT) to predict the concentration and potential profiles of a Lennard-Jones (LJ) fluid and water confined in a nanochannel. The deep learning model is built based on a convolutional encoder–decoder network (CED) and is applied for high-dimensional surrogate modeling to relate the fluid properties to the fluid–fluid potential. The CED model is then combined with the interatomic potential-based continuum theory to determine the concentration profiles of a confined LJ fluid and confined water. Further, we show that the DL-QT model exhibits robust predictive performance for a confined LJ fluid under various thermodynamic states and for water confined in a nanochannel of different widths. The DL-QT model seamlessly connects molecular physics at the nanoscale with continuum theory by using a deep learning model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

ReaxFF Parameter Set for Boron Clusters and Icosahedral Boron Crystals: Comparison with Density Functional Theory and Machine-Learning Potentials

Icosahedral boron materials, which include regular icosahedra of 12 boron atoms have gained increasing attention due to their potential applications as superhard materials, semiconductors, and energy storage media. However, the synthesis of high quality crystals of these materials has been a major barrier to the development of these applications. To enable computational prediction of synthesis conditions yielding high-quality icosahedral boron crystals, herein we tested and refined a set of ReaxFF parameters for the nucleation and growth of such crystals. We focused on matching the relative energies of small boron clusters obtained by density functional theory since such small clusters and similar motifs are likely present in crystal nuclei and at the interface of growing crystals. Using a training set of B 80 clusters, including a low-energy core–shell structure containing a B 12 icosahedron core and a high-energy single-shell structure produced in preliminary ReaxFF simulations, the ReaxFF parameter set was refined to better reproduce energies calculated by density functional theory (DFT). Among existing ReaxFF parameter sets and the machine-learning interatomic potentials MACE-MP-0, MACE-MP-0b3, MACE-MPA-0, PFP v7.0.0, and SevenNet-MF-ompa, only our new parameter set and PFP v7.0.0 correctly ranked these B 80 clusters. This refinement led to improved agreement with DFT for a test set of 58 clusters consisting of 8–103 boron atoms. Furthermore, our refined parameter set yielded greater local icosahedral structure than the previously existing ReaxFF parameter set for larger scale simulations of crystallization from supercooled liquid boron. Additionally, simulations of solid boron in contact with molten nickel using our refined ReaxFF parameters yielded a boron solubility value that agrees moderately well with experimental expectations, while the previous boron parameters gave a value that was much too low.

boron↗
DOE OSTI2025

Bridging material models across scales: An integrated approach to equation of state and molecular dynamics modeling of copper

New uncertainty-aware equation of state (EOS) and electrical conductivity (EC) models for copper have been developed. The multiphase EOS/EC models are fit to experimental solid/liquid EC isobar measurements as well as density-functional theory molecular dynamics (DFT-MD) EC calculations in both expanded and compressed regimes (0.1–16 g/ cm 3 ⁠). The liquid and solid EOS phases were fit to available experimental data along with additional DFT-MD data over the same range as the EC. Leveraging the DFT-MD data, a corresponding machine-learned interatomic potential (MLIAP) for copper was trained using genetic-algorithm optimization. The copper MLIAP was constrained by EOS shock points at high compressions. The final EOS bounded MLIAP proves to be stable over a large density range (approximately 0.1–20 g/ cm 3 ) with good agreement to an isothermal compression curve, shock Hugoniot, and liquid speed of sound measurements at high pressures (100s of GPa).

Acoustic measurements and instrumentation↗
DOE OSTI2026

Machine-learning interatomic potentials for interfaces in all-solid-state batteries: Perspectives on training data, model selection, and validation

Interfaces play a pivotal role in dictating the performance and reliability of all-solid-state batteries (ASSBs), where complex electro-chemo-mechanical phenomena at grain boundaries (GBs) and interfaces can lead to degradation and failure. Traditional atomistic simulation methods, such as first-principles calculations and classical molecular dynamics, face limitations in modeling these interfaces due to either high computational cost or insufficient transferability to the diverse atomic environments evolving at interfaces. Machine-learning interatomic potentials (MLIPs) have emerged as a transformative approach, enabling large-scale, high-accuracy simulations of disordered and chemically complex systems by leveraging the predictability of machine learning models trained on first-principles data. Recent applications of MLIPs have demonstrated their ability to capture intricate behaviors at ASSB interfaces, including ion transport, interfacial evolution, and degradation mechanisms, with accuracy and efficiency unattainable by conventional methods. This prospective paper presents comprehensive analysis and practical guidance for MLIP development for GBs and interfaces in ASSBs, with a focus on three key pillars: data generation, model selection, and validation. Here, we review the current state of MLIP applications for GBs and interfaces in both general and ASSB-specific materials, highlighting best practices and challenges in constructing diverse and representative datasets, choosing appropriate machine learning architectures, and rigorously validating model performance. We also discuss emerging strategies and opportunities for improved reliability and efficiency of MLIPs to simulate realistic interfaces in ASSBs.

Energy - Storage↗
NASA NTRS2001

Equivalent-Continuum Modeling of Nano-Structured Materials

A method has been developed for modeling structure-property relationships of nano-structured materials. This method serves as a link between computational chemistry and solid mechanics by substituting discrete molecular structures with an equivalent-continuum model. It has been shown that this substitution may be accomplished by equating the vibrational potential energy of a nano-structured material with the strain energy of representative truss and continuum models. As an important example with direct application to the development and characterization of single-walled carbon nanotubes, the model has been applied to determine the effective continuum geometry of a graphene sheet. A representative volume element of the equivalent-continuum model has been developed with an effective thickness. This effective thickness has been shown to be similar to, but slightly smaller than, the interatomic spacing of graphite.

Odegard, Gregory M.↗