Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “injection height”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Quantum dot lasers with asymmetric barrier layers: Close-to-ideal threshold and power characteristics

A theory of static (threshold and power) characteristics of novel diode lasers – quantum dot (QD) lasers with asymmetric barrier layers (ABLs) – is developed. The barrier layers are asymmetric in that they have considerably different heights for the carriers of opposite signs. The ABL located on the electron- (hole-) injecting side of the structure provides a low barrier (ideally no barrier) for electrons (holes) [so that it does not prevent electrons (holes) from easily approaching the active region] and a high barrier for holes (electrons) [so that holes (electrons) injected from the opposite side of the structure do not overcome it]. The use of ABLs should thus ideally prevent the simultaneous presence of electrons and holes (and hence parasitic electron – hole recombination) outside the QDs. It is shown in this work that in such a case of total suppression of parasitic recombination, the QD lasers with ABLs offer close-to-ideal performance: the threshold current density is below 10 A cm{sup −2} at any temperature, the absolute value of the characteristic temperature is above 1000 K (which manifests a virtually temperature-independent operation), the internal differential quantum efficiency is practically unity, and the light – current characteristic is linear at any pump current. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characteristics of Non-Premixed Turbulent Flames in Microgravity

The momentum of the fuel (and/or air) jet is important in classifying gas-jet diffusion flame behavior. Normal-gravity data on gas-jet flames show that the flame height (non-dimensionalized with respect to an effective diameter) can be correlated to a density weighted Froude number in the buoyancy-dominated limit. In the momentum-dominated limit this non-dimensional flame height asymptotes to a constant value. The momentum-dominated limit under normal gravity conditions is usually obtained for very high injection velocities which in turn results in high values of the injection Reynolds number. This results in a complicated flame structure because of the large number of turbulence scales involved. In order to gain better insight into the structure of these flames it would be useful to reduce the injection Reynolds number while still maintaining turbulent conditions. This can be done in microgravity where momentum-dominated turbulent flames are obtained at much smaller velocities than in normal gravity. In this paper, experimental results on the effects of nozzle diameter and fuel dilution on flame height are discussed. The experimental values are compared with predictions from a numerical procedure utilizing the standard k-epsilon turbulence model. Flame height scaling with nozzle size and dilution is established. Differences between model predictions and measurements are presented. In order to explain these differences, evolutions of turbulent spectra and Taylor microscale along the flame axis are considered.

Hegde, U.↗

Effects of Facet Joint Injection Reducing the Need for Percutaneous Vertebroplasty in Vertebral Compression Fractures

ObjectiveTo evaluate the effects of facet joint injection (FJI) reducing the need for percutaneous vertebroplasty (PVP) in cases of vertebral compression fracture (VCF).Materials and MethodsA total of 169 patients who were referred to the radiology department of our institution for PVP between January 2011 and December 2014 were retrospectively evaluated. The effectiveness of FJI was evaluated by the proportion of patients who cancelled PVP and who experienced reduced pain. In addition, by means of medical chart and MRI review, those clinical factors (age, sex, history of trauma, amount of injected steroids and interval days elapsed between VCF and FJI) and MR image factors (kyphosis angle, height loss, single or multiple level of VCF, burst fracture, central canal compromise, posterior element injury) that were believed to be significant for the effectiveness of FJI were statistically analysed.ResultsIn the 26 patients with FJI prior to PVP, six (23 %) patients cancelled PVP with considerable improvement in reported pain. In the 20 patients with PVP after FJI, improvement in pain after FJI was reported by six patients, resulting in a total of 12 patients (46 %) who experienced reduced pain after FJI. Clinical factors and MR image factors did not show any statistically significant difference between those groups, divided by PVP cancellation and by improvement of pain.ConclusionAfter FJI prior to PVP, about one quarter of patients cancelled PVP due to reduced pain and overall about half of the patients experienced reduced pain.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

The magnetized galactic wind and synchrotron halo of the starburst dwarf galaxy IC 10

We aim to explore whether strong magnetic fields can be effectively generated in low-mass dwarf galaxies and, if so, whether such fields can be affected by galactic outflows and spread out into the intergalactic medium (IGM). We performed a radio continuum polarimetry study of IC 10, the nearest starbursting dwarf galaxy, using a combination of multifrequency interferometric (VLA) and single-dish (Effelsberg) observations. VLA observations at 1.43 GHz reveal an extensive and almost spherical radio halo of IC 10 in total intensity, extending twice more than the infrared-emitting galactic disk. The halo is magnetized with a magnetic field strength of 7 μG in the outermost parts. Locally, the magnetic field reaches about 29 μG in H ii complexes, becomes more ordered, and weakens to 22 μG in the synchrotron superbubble and to 7–10 μG within H i holes. At the higher frequency of 4.86 GHz, we found a large-scale magnetic field structure of X-shaped morphology, similar to that observed in several edge-on spiral galaxies. The X-shaped magnetic structure can be caused by the galactic wind, advecting magnetic fields injected into the interstellar medium by stellar winds and supernova explosions. The radio continuum scale heights at 1.43 GHz indicate the bulk speed of cosmic-ray electrons outflowing from H ii complexes of about 60 km s{sup −1}, exceeding the escape velocity of 40 km s{sup −1}. Hence, the magnetized galactic wind in IC 10 inflates the extensive radio halo visible at 1.43 GHz and can seed the IGM with both random and ordered magnetic fields. These are signatures of intense material feedback onto the IGM, expected to be prevalent in the protogalaxies of the early universe.

79 ASTRONOMY AND ASTROPHYSICS↗

InGaAs/InAlAs hot-electron transistor

Using InGaAs for the base and InAlAs for the emitter and collector barriers, the first hot-electron transistor in this material system is fabricated. It is shown that 1.6 percent of the injected hot electrons can be transported ballistically through a 0.3 micron thick In(0.53)Ga(0.47)As plus 800-A-thick InAlAs barrier layer at 77 K giving rise to an average mean free path of 920 A. An energy spread of 130 MeV was observed for the ballistic electrons injected at about 700 MeV above the thermal equilibrium conditions. The value of collector barrier heights measured are in reasonable agreement with those deduced independently from thermionic emission studies in InGaAs gate, InAlAs/InGaAs capacitor structures.

Reddy, U. K.↗

Apparatus, components and operating methods for circulating fluidized bed transport gasifiers and reactors

The improvements proposed in this invention provide a reliable apparatus and method to gasify low rank coals in a class of pressurized circulating fluidized bed reactors termed "transport gasifier." The embodiments overcome a number of operability and reliability problems with existing gasifiers. The systems and methods address issues related to distribution of gasification agent without the use of internals, management of heat release to avoid any agglomeration and clinker formation, specific design of bends to withstand the highly erosive environment due to high solid particles circulation rates, design of a standpipe cyclone to withstand high temperature gasification environment, compact design of seal-leg that can handle high mass solids flux, design of nozzles that eliminate plugging, uniform aeration of large diameter Standpipe, oxidant injection at the cyclone exits to effectively modulate gasifier exit temperature and reduction in overall height of the gasifier with a modified non-mechanical valve.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

High Earth orbit design for lunar assisted small Explorer class missions

Small Expendable launch vehicles are capable of injecting modest payloads into high Earth orbits having apogee near the lunar distance. However, lunar and solar perturbations can quickly lower perigee and cause premature reentry. Costly perigee raising maneuvers by the spacecraft are required to maintain the orbit. In addition, the range of inclinations achievable is limited to those of launch sites unless costly spacecraft maneuvers are performed. This study investigates the use of a lunar swingby in a near-Hohmann transfer trajectory to raise perigee into the 8 to 25 solar radius range and reach a wide variety of inclinations without spacecraft maneuvers. It is found that extremely stable orbits can be obtained if the postencounter spacecraft orbital period is one-half of a lunar sidereal revolution and the Earth-vehicle-Moon geometry is within a specified range. Criteria for achieving stable orbits with various perigee heights and ecliptic inclinations are developed, and the sensitivity of the resulting mission orbits to transfer trajectory injection (TTI) errors is examined. It is shown that carefully designed orbits yield lifetimes of several years, with excellent ground station coverage characteristics and minimal eclipses. A phasing loop error correction strategy is considered with the spacecraft propulsion system delta V demand for TTI error correction and a postlunar encounter apogee trim maneuver typically in the 30 to 120 meters per second range.

Mathews, M.↗

Efficient barrier for charge injection in polyethylene by silver nanoparticles/plasma polymer stack

Charge injection from a metal/insulator contact is a process promoting the formation of space charge in polymeric insulation largely used in thick layers in high voltage equipment. The internal charge perturbs the field distribution and can lead to catastrophic failure either through its electrostatic effects or through energetic processes initiated under charge recombination and/or hot electrons effects. Injection is still ill-described in polymeric insulation due to the complexity of the contact between the polymer chains and the electrodes. Barrier heights derived from the metal work function and the polymer electronic affinity do not provide a good description of the measurements [Taleb et al., IEEE Trans. Dielectr. Electr. Insul. 20, 311–320 (2013)]. Considering the difficulty to describe the contact properties and the need to prevent charge injection in polymers for high voltage applications, we developed an alternative approach by tailoring the interface properties by the silver nanoparticles (AgNPs)/plasma polymer stack, deposited on the polymer film. Due to their small size, the AgNPs, covered by a very thin film of plasma polymer, act as deep traps for the injected charges thereby stabilizing the interface from the point of view of charge injection. After a quick description of the method for elaborating the nanostructured layer near the contact, it is demonstrated how the AgNPs/plasma polymer stack effectively prevents, in a spectacular way, the formation of bulk space charge.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reply to Comment by Cole-dai Et Al. on "Climatic Impact of the Long-lasting Laki Eruption: Inapplicability of Mass-independent Sulfur Isotope Composition Measurements"

Here we respond to the comments by Cole-Dai et al. [2014] on our article Schmidt et al. [2012]. Specifically, in response to section 2 of their reply, we argued in Schmidt et al. [2012] that based on previously published estimates of the volatile release height during the 1783-1784 C.E. Laki eruption, the lack of a sulfur massindependent fractionation (MIF) anomaly is expected. In other words, no previous study on Laki ever argued that this eruption emitted SO2 into altitudes >13-15 km. In section 2.3, Cole-Dai et al. [2014] argue that the nonzero Δ33S value of their Laki sample 1 may be explained by a short-lived explosive phase at Laki during which volatiles reached the stratosphere. In Schmidt et al. [2012] in section 2, we argued in agreement with Cole-Dai et al. [2014] (section 3.1) that for a MIF anomaly to be preserved, the Laki volatiles would have had to be emitted in >20 km altitude. Our main point is that eruption column heights >20 km are unlikely based on the historical accounts and plume-rise modeling for the Laki eruption [Stothers et al., 1986; Woods, 1993; Thordarson and Self, 2003]. In Schmidt et al. [2012], we argued that to deduce a short-lived climatic impact of the Laki eruption based on the lack of a MIF anomaly and the length of the sulfate deposition in Greenland ice cores may be misleading because the climatic impact will outlast the radiative forcing of the Laki aerosol cloud. Cole-Dai et al. [2014] acknowledge the latter in their reply in section 4.2. We agreewith Cole-Dai et al. [2014] in that themagnitude and length of the climatic impact during the winter of 1783-1784 depends on the altitude of the volatile release during the eruption (sections 2.3 and 4.2). However, even if we assumed that during Laki all sulfur dioxide (SO2) would have been released in the troposphere, then the aerosol cloud would still be present in the upper troposphere during March 1784, as is evident from independent model simulations of this "tropospheric-only" scenario [Stevenson et al., 2003]. We acknowledge that there is uncertainty on the volatile release height for Laki; however, it is worth considering that those climate model simulations that used an injection altitude between 9 km and 13 km for the Laki SO2 [Highwood and Stevenson, 2003; Oman et al., 2006a, 2006b; Schmidt et al., 2012] best match the observed temperature changes during summer of 1783 [Angell and Korshover, 1985; Brázdil et al., 2010; Briffa et al., 1998; D'Arrigo and Jacoby, 1999; Jacoby et al., 1999; Kington, 1988; Manley, 1974; Parker et al., 1992; Thordarson and Self, 2003]. Based on these model simulations, a climatic impact during the winter of 1783-1784, albeit weaker than during the climactic phases of Laki, is expected (and our argument here does not exclude the role of natural variability in contributing to the cold winter of 1783-1784 as discussed in Schmidt et al. [2012]). Therefore, we continue to argue that for high-latitude eruptions such as Laki, the applicability of sulfur isotopic measurements to interpret the climatic relevance has yet to be demonstrated. Itmay transpire that the interpretation of MIF signals for the climate-relevance of an eruption is valid and unambiguous only for short-lived explosive eruptions in the tropics. In terms of the processes producing a MIF anomaly (section 3.3 in Cole-Dai et al. [2014]), the works by Hattori et al. [2013] and Ono et al. [2013] suggest that there are remaining issues not discussed by Cole-Dai et al. [2014], for instance, self-shielding of SO2 due to high column densities typical for eruptions of Pinatubo-scale and greater, and the preservation of the MIF signature in general.

general circulation model↗

Characterization of the CMS Endcap Timing Layer readout chip prototype with charge injection

We present the characterization of a readout Application-Specific Integrated Circuit (ASIC) for the CMS Endcap Timing Layer (ETL) of the High-Luminosity LHC upgrade with charge injection. The ASIC, named ETROC and developed in a 65 nm CMOS technology, reads out a 16× 16 pixel matrix of the Low-Gain Avalanche Detector (LGAD). The jitter contribution from ETROC is required to be below 40 ps to achieve the 50 ps overall time resolution per hit. The analog readout circuits in ETROC consist of the preamplifier and the discriminator. The preamplifier handles the LGAD charge signal with the most probable value of around 15 fC. The discriminator generates the digital pulse, which provides the Time-Of-Arrival (TOA, leading edge) and Time-Over-Threshold (TOT, pulse width) information. The prototype of ETROC (ETROC0) that implements a single channel of analog readout circuits has been evaluated with charge injection. The jitter of the analog readout circuits, measured from the discriminator's leading edge, is better than 16 ps for a charge larger than 15 fC with the sensor capacitance. The time walk resulting from different pulse heights can be corrected using the TOT measurement. The time resolution distribution has a standard deviation of 29 ps after the time-walk correction from the charge injection. At room temperature, the preamplifier's power consumption is measured to be 0.74 mW and 1.53 mW per pixel in the low- and high-power mode, respectively. Finally, the measured power consumption of the discriminator is 0.84 mW per pixel. With the ASIC alone or the LGAD sensor, The characterization performances fulfill the ETL's challenging requirements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Universal Ratio of Coulomb Interaction to Geometric Quantization in (In, Ga)As/GaAs Quantum Dots

We study the photoluminescence of self-assembled (In,Ga)As/GaAs quantum dot ensembles with varying confinement potential height. The low energy shift of the s-shell emission with increasing excitation power gives a measure of the Coulomb interaction in these structures as it results from carrier–carrier interactions between the optically injected exciton complexes. When dividing this shift by the dot level splitting, determined by the geometric confinement, we obtain a universal function of the number of involved excitons that is independent of the confinement potential height. This shows an identical scaling of Coulomb interaction and geometric quantization with varying confinement.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

System engineering study of electrodynamic tether as a spaceborne generator and radiator of electromagnetic waves in the ULF/ELF frequency band

The transmission and generation by orbiting tethered satellite systems of information carrying electromagnetic waves in the ULF/ELF frequency band to the Earth at suitably high signal intensities was examined and the system maintaining these intensities in their orbits for long periods of time without excessive onboard power requirements was investigated. The injection quantity power into electromagnetic waves as a function of system parameters such as tether length and orbital height was estimated. The basic equations needed to evaluate alternataing current tethered systems for external energy requirements are presented. The energy equations to tethered systems with various lengths, tether resistances, and radiation resistances, operating at different current values are applied. Radiation resistance as a function of tether length and orbital height is discussed. It is found that ULF/ELF continuously radiating systems could be maintained in orbit with moderate power requirements. The effect of tether length on the power going into electromagnetic waves and whether a single or dual tether system is preferable for the self-driven mode is discussed. It is concluded that the single tether system is preferable over the dual system.

Estes, R. D.↗

Magnetosphere-Regolith/Exosphere Coupling: Differences and Similarities to the Earth Magnetosphere-Ionosphere Coupling

Of the three Mercury passes made by Mariner 10, the first and third went through the Mercury magnetosphere. The third encounter which occurred during northward IMF (interplanetary magnetic field) showed quiet time magnetic fields. In contrast the third encounter observed clear substorm signatures including dipolarization, field-aligned currents (FACs) and injection of energetic electrons at geosynchronous orbit. However, the determined cross-tail potential drop and the assumed height integrated conductance indicate that the FAC should be 2-50 times weaker than observed. We address this inconsistency and the fundamental problem of FAC closure whether this takes place in the regolith or in the exosphere. The current state of knowledge of the magnetosphere-exosphere/regolith coupling is addressed and similarities and differences to the Earth magnetosphere-ionosphere coupling are discussed.

Gjerleov, J. W.↗

Explosive Volcanic Eruptions from Linear Vents on Earth, Venus and Mars: Comparisons with Circular Vent Eruptions

Conditions required to support buoyant convective plumes are investigated for explosive volcanic eruptions from circular and linear vents on Earth, Venus, and Mars. Vent geometry (linear versus circular) plays a significant role in the ability of an explosive eruption to sustain a buoyant plume. On Earth, linear and circular vent eruptions are both capable of driving buoyant plumes to equivalent maximum rise heights, however, linear vent plumes are more sensitive to vent size. For analogous mass eruption rates, linear vent plumes surpass circular vent plumes in entrainment efficiency approximately when L(sub o) > 3r(sub o) owing to the larger entrainment area relative to the control volume. Relative to circular vents, linear vents on Venus favor column collapse and the formation of pyroclastic flows because the range of conditions required to establish and sustain buoyancy is narrow. When buoyancy can be sustained, however, maximum plume heights exceed those from circular vents. For current atmospheric conditions on Mars, linear vent eruptions are capable of injecting volcanic material slightly higher than analogous circular vent eruptions. However, both geometries are more likely to produce pyroclastic fountains, as opposed to convective plumes, owing to the low density atmosphere. Due to the atmospheric density profile and water content on Earth, explosive eruptions enjoy favorable conditions for producing sustained buoyant columns, while pyroclastic flows would be relatively more prevalent on Venus and Mars. These results have implications for the injection and dispersal of particulates into the planetary atmosphere and the ability to interpret the geologic record of planetary volcanism.

Glaze, Lori S.↗

Fast magnetospheric echoes of energetic electron beams

Electron beam experiments using rocketborne instrumentation have confirmed earlier observations of fast magnetospheric echoes of artificially injected energetic electrons. A total of 234 echoes have been observed in a pitch angle range from 9 to 110 deg at energies of 1.87 and 3.90 keV. Out of this number, 95 echoes could unambiguously be identified with known accelerator operations at 2-, 4-, or 8-keV energy and highest current levels resulting in the determination of transit times of typically 300 to 400 ms. In most cases, when echoes were present in both energy channels, the higher-energy electrons led the lower-energy ones by 50 to 70 ms. Adiabatic theory applied to these observations yields a reflection height of 3000 to 4000 km. An alternative interpretation is briefly examined, and its relative merit in describing the observations is evaluated. The injection process is discussed in some detail as the strong beam-plasma interaction that occurred near the electron accelerator appears to be instrumental in generating the source of heated electrons required for successful echo detection for both processes.

Wilhelm, K.↗

GADRAS Batch Inject Tool User Guide

Gamma Detector Response and Analysis Software (GADRAS) is used by the radiation detection and emergency response community to perform modeling and spectral analysis for gamma detector systems. Built into GADRAS is the ability to define a detector, geometry, background characteristics and source composition to generate synthetic spectra for drills and exercises (injects). Consequence Management is currently in development of a sample result data simulator tool in which a deposition model is probed for source conditions at moments in time and locations in space. These values are used to generate realistic sample results for use in drills and exercises. In addition to sample results, there is a need to simulate the actual spectra that would be observed in the field by downlooking HPGe instruments given a deposition activity. This way, the FRMAC Gamma Spectroscopist can practice their process of generating quantified results from spectra on realistic data as well. Recognizing the decades of work done in GADRAS to accurately generate synthetic spectra, this team decided to build a link between the new simulator and GADRAS to generate these spectra quickly and easily. The simulator tool will generate a file that specifies the name of the spectra, its location, date/time of measurement, duration of measurement, height off the ground, and the deposition activity and age for every radionuclide in the simulation. Then, a new tool within the Inject Tab of GADRAS was developed to read in this file given a detector selection and generate In-Situ spectra for each row in the file in any file format the user chooses. This way, simulation cell staff can take these files and then upload them to the appropriate data system (RAMS or RadResponder) for use during drills and exercises. An advanced feature of this tool allows for generating any spectra given an appropriate model and mapping of source to model layer in the batch inject tool. This way, spectra from field sample counts, mobile laboratories, or even fixed laboratories can be generated in bulk given an estimate of the radioactivity concentration or total radioactivity in an import file. This expands the capabilities of this tool a great deal and will make it a more useful tool for CM and others to help estimate detector response for nearly any situation. This user guide will explain the steps needed to perform a batch inject file generation.

61 RADIATION PROTECTION AND DOSIMETRY↗

Determination of the charge neutrality level of poly(3-hexylthiophene)

The Al/poly(3-hexylthiophene) (P3HT) and Ag/P3HT interfaces were investigated using photoemission spectroscopy in combination with in situ thin-film deposition. The P3HT thin films were deposited directly into high vacuum from solution on the two metal substrates using an electrospray system and characterized via photoemission spectroscopy. The electronic structure and charge injection barriers at these interfaces were determined from the evaluation of the resulting spectra sequences. A linear correlation between barrier heights and substrate work functions was observed from the collected data in combination with previously published results, suggesting that the 'Induced Density of Interfaces States' model for small molecular materials is also valid for conjugated polymer interfaces. The corresponding P3HT 'screening factor' as well as its charge neutrality level was determined to be 0.48 and 3.44 eV, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Numerically optimized structures for dielectric asymmetric dual-grating laser accelerators

Optical scale dielectric structures are promising candidates to realize future compact, low cost particle accelerators, since they can sustain high acceleration gradients in the range of GeV/m. Here, we present numerical simulation results for a dielectric asymmetric dual-grating accelerator. It was found that the asymmetric dual-grating structures can efficiently modify the laser field to synchronize it with relativistic electrons, therefore increasing the average acceleration gradient by ∼10% in comparison to symmetric structures. The optimum pillar height which was determined by simulation agrees well with that estimated analytically. The effect of the initial kinetic energy of injected electrons on the acceleration gradient is also discussed. Finally, the required laser parameters were calculated analytically and a suitable laser is proposed as energy source.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗