Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “impulse noise”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Impulsive microwave burst and solar noise storm emission resolved with the VLA

The evolution of a microwave burst at 20.7 cm wavelength and a type I noise storm at 91.6 cm wavelength are examined using VLA. The magnetic loops in the two spectral regions are studied. The sizes and brightness temperatures of the 20.7 cm burst sources are compared with those predicted by multithermal and nonthermal models of microwave burst emission of Dulk and Dennis (1982). The data reveal that: (1) the precursor, impulsive, and post-impulsive phases of the 20.7 cm burst are located in spatially separated sources; (2) the gradual enhancement of a 91.6 cm noise storm continuum source suggests a feed-back mechanism exists between activity in higher and lower lying loops; and (3) the derived magnetic field strengths at 20.7 cm for the nonthermal models are 35-160 G with core field strengths of 125-220 G.

Willson, Robert F.↗

Source locations for impulsive electric signals seen in the night ionosphere of Venus

A mapping of the rate of occurrence of impulsive VLF noise bursts in Venus' dark low altitude ionosphere, which increases rapidly with decreasing altitude, as a function of latitude and longitude indicates enhanced occurrence rates over Atla. In a 30-sec observing period, there are impulsive signals 70 percent of the time at 160 km in the region of maximum occurrence; the occurrence rates, moreover, increase with decreasing latitude, so that the equatorial rate is of the order of 1.6 times that at 30 deg latitude. These phenomena are in keeping with lightning-generated wave sources.

Russell, C. T.↗

Annoyance due to simulated blade-slap noise

The effects of several characteristics of blade slap noise on annoyance response were studied. These characteristics or parameters were the sound pressure level of the continuous noise used to simulate helicopter broadband noise, the ratio of impulse peak to broadband noise or crest factor, the number of pressure excursions comprising an impulse event, the rise and fall time of the individual impulses, and the repetition frequency of the impulses. Analyses were conducted to determine the correlation between subjective response and various physical measures for the range of parameters studied. A small but significant improvement in the predictive ability of PNL was provided by an A-weighted crest factor correlation. No significant improvement in predictive ability was provided by a rate correction.

Powell, C. A.↗

A prediction of high-speed rotor noise

A combined computational (CFD) and integral approach solves the acoustic pressure fields of two high-speed helicopter rotors. A CFD code supplies boundary data to a non-linear type of Kirchhoff integral formulation to find the far-field pressures. Direct calculations of pressures are given by the CFD code up to the sonic cylinder where the Kirchhoff method takes over. This paper shows predictions and measurements of High-Speed Impulsive (HSI) noise in hover for two different rotor geometries. One rotor has a conventional rectangular planform, while the other rotor is highly swept and tapered. The swept rotor analysis forms the majority of this paper. Test data from both rotors are shown and compared with predictions for a range of tip Mach numbers from .85 to .95 (including delocalization). The correlation with the near-field pressures from the straight bladed experiment is excellent and good to excellent correlation is seen for the far-field pressures from both experiments.

Purcell, Timothy W.↗

Rotor-vortex interaction noise

A theoretical and experimental study is carried out to develop a first-principles analysis for predicting noise generated by helicopter main-rotor shed vortices interacting with the tail rotor. The generalized prediction procedure calls for a knowledge of the incident vortex velocity field, the rotor geometry, and the rotor operating conditions. The analysis encompasses compressibility effects and chordwise and spanwise noncompactness and treats oblique intersections with the blade planform. In assessing the theory, a model rotor experiment which isolates the blade-vortex interaction noise from other rotor noise mechanisms is conducted. An isolated tip vortex, generated by an upstream semispan airfoil, is convected into the model rotor, and acoustic spectra, pressure signatures, and directivity are measured. Ingestion of the vortex by the rotor is experimentally observed to generate harmonic noise and impulsive waveforms.

Schlinker, R. H.↗

Rotor-vortex interaction noise

A theoretical and experimental study was conducted to develop a validated first principles analysis for predicting noise generated by helicopter main-rotor shed vortices interacting with the tail rotor. The generalized prediction procedure requires a knowledge of the incident vortex velocity field, rotor geometry, and rotor operating conditions. The analysis includes compressibility effects, chordwise and spanwise noncompactness, and treats oblique intersections with the blade planform. Assessment of the theory involved conducting a model rotor experiment which isolated the blade-vortex interaction noise from other rotor noise mechanisms. An isolated tip vortex, generated by an upstream semispan airfoil, was convected into the model tail rotor. Acoustic spectra, pressure signatures, and directivity were measured. Since assessment of the acoustic prediction required a knowledge of the vortex properties, blade-vortes intersection angle, intersection station, vortex stength, and vortex core radius were documented. Ingestion of the vortex by the rotor was experimentally observed to generate harmonic noise and impulsive waveforms.

Schlinker, R. H.↗

A 4.8 kbps code-excited linear predictive coder

A secure voice system STU-3 capable of providing end-to-end secure voice communications (1984) was developed. The terminal for the new system will be built around the standard LPC-10 voice processor algorithm. The performance of the present STU-3 processor is considered to be good, its response to nonspeech sounds such as whistles, coughs and impulse-like noises may not be completely acceptable. Speech in noisy environments also causes problems with the LPC-10 voice algorithm. In addition, there is always a demand for something better. It is hoped that LPC-10's 2.4 kbps voice performance will be complemented with a very high quality speech coder operating at a higher data rate. This new coder is one of a number of candidate algorithms being considered for an upgraded version of the STU-3 in late 1989. The problems of designing a code-excited linear predictive (CELP) coder to provide very high quality speech at a 4.8 kbps data rate that can be implemented on today's hardware are considered.

Tremain, Thomas E.↗

Euler solutions to nonlinear acoustics of non-lifting hovering rotor blades

For the first time a computational fluid dynamics (CFD) method is used to calculate directly the high-speed impulsive (HSI) noise of a non-lifting hovering rotor blade out to a distance of over three rotor radii. In order to accurately propagate the acoustic wave in a stable and efficient manner, an implicit upwind-biased Euler method is solved on a grid with points clustered along the line of propagation. A detailed validation of the code is performed for a rectangular rotor blade at tip Mach numbers ranging from 0.88 to 0.92. The agreement with experiment is excellent at both the sonic cylinder and at 2.18 rotor radii. The agreement at 3.09 rotor radii is still very good, showing improvements over the results from the best previous method. Grid sensitivity studies indicate that with special attention to the location of the boundaries a grid with approximately 60,000 points is adequate. This results in a computational time of approximately 40 minutes on a Cray-XMP. The practicality of the method to calculate HSI noise is demonstrated by expanding the scope of the investigation to examine the rectangular blade as well as a highly swept and tapered blade over a tip Mach number range of 0.80 to 0.95. Comparisons with experimental data are excellent and the advantages of planform modifications are clearly evident. New insight is gained into the mechanisms of nonlinear propagation and the minimum distance at which a valid comparison of different rotors can be made: approximately two rotor radii from the center of rotation.

Baeder, J. D.↗

Euler solutions to nonlinear acoustics of non-lifting rotor blades

For the first time a computational fluid dynamics (CFD) method is used to calculate directly the high-speed impulsive (HSI) noise of a non-lifting hovering rotor blade out to a distance of over three rotor radii. In order to accurately propagate the acoustic wave in a stable and efficient manner, an implicit upwind-biased Euler method is solved on a grid with points clustered along the line of propagation. A detailed validation of the code is performed for a rectangular rotor blade at tip Mach numbers ranging from 0.88 to 0.92. The agreement with experiment is excellent at both the sonic cylinder and at 2.18 rotor radii. The agreement at 3.09 rotor radii is still very good, showing improvements over the results from the best previous method. Grid sensitivity studies indicate that with special attention to the location of the boundaries a grid with approximately 60,000 points is adequate. This results in a computational time of approximately 40 minutes on a Cray-XMP. The practicality of the method to calculate HSI noise is demonstrated by expanding the scope of the investigation to examine the rectangular blade as well as a highly swept and tapered blade over a tip Mach number range of 0.80 to 0.95. Comparisons with experimental data are excellent and the advantages of planform modifications are clearly evident. New insight is gained into the mechanisms of nonlinear propagation and the minimum distance at which a valid comparison of different rotors can be made: approximately two rotor radii from the center of rotation.

Baeder, J. D.↗

Time-Varying Loads of Co-Axial Rotor Blade Crossings

The blade crossing event of a coaxial counter-rotating rotor is a potential source of noise and impulsive blade loads. Blade crossings occur many times during each rotor revolution. In previous research by the authors, this phenomenon was analyzed by simulating two airfoils passing each other at specified speeds and vertical separation distances, using the compressible Navier-Stokes solver OVERFLOW. The simulations explored mutual aerodynamic interactions associated with thickness, circulation, and compressibility effects. Results revealed the complex nature of the aerodynamic impulses generated by upperlower airfoil interactions. In this paper, the coaxial rotor system is simulated using two trains of airfoils, vertically offset, and traveling in opposite directions. The simulation represents multiple blade crossings in a rotor revolution by specifying horizontal distances between each airfoil in the train based on the circumferential distance between blade tips. The shed vorticity from prior crossing events will affect each pair of upperlower airfoils. The aerodynamic loads on the airfoil and flow field characteristics are computed before, at, and after each airfoil crossing. Results from the multiple-airfoil simulation show noticeable changes in the airfoil aerodynamics by introducing additional fluctuation in the aerodynamic time history.

Time-Varying Loads↗

Modeling Shed Vorticity from Coaxial Blade Interactions

Coaxial counter-rotating rotors operate in a flowfield different from single rotors. Aerodynamic interactions such as blade crossing and shed vorticity result in potential sources of noise and impulsive blade loads. In previous research, the authors simulated two trains of airfoils traveling in opposite directions for specified speeds, airfoil thickness and vertical separation distances, using the compressible Navier-Stokes solver OVERFLOW. Previously, the effects of circulation, thickness, and compressibility were explored. This work continues the previous research by exploring downwash and shed vorticity effects. These phenomena are explored by simulating two trains of eight airfoils vertically separated traveling in opposite directions. The effects of downwash are simulated by introducing a vertical flow. Vorticity shed from the upper train of airfoils is shown to interact with the lower train, affecting the loading on the lower airfoils. Furthermore, viscid and inviscid calculations are performed to further understand the behavior of shed vorticity.

Natasha L Schatzman↗

Arousal from sleep by noises from aircraft with and without acoustically treated nacelles

The electroencephalographic and behavioral responses during sleep of four subjects, aged 46 to 58 years, to three types of noises were tested over 14 consecutive nights. The stimuli were two DC-8 jet landing noises (each 30 seconds in duration and coming from DC-8 aircraft with and without acoustical treatment on the engine nacelles) and a 4-second burst of pink noise. Each of the noises was tested at nominal intensities of 61 and 79 dBA. Other physical descriptors of the noises were measured or computed. The results indicate that for an equivalent degree of sleep disruption, noise form the jet aircraft with untreated nacelles must be about 6 dBA less intense than the jet with acoustically treated nacelles. Predictions of the effects of noise on sleep appear, tentatively, to attain the highest accuracy when the physical descriptor of noise intensity includes information about the impulsive characteristics of that noise as well as its long-term spectral content.

Lukas, J. S.↗

A subjective field study of helicopter blade-slap noise

The effects of impulsiveness on the noisiness of helicopters are examined by varying the main rotor speed while maintaining a constant airspeed. This resulted in other characteristics of the noise being held relatively constant. Other controlled variables included altitude, side line distance, descent operations, and level flyovers. A description is provided of the concept, experimental design and procedures along with results based on partial analyses of acoustic and subjective response data. No significant improvement in the noisiness predictive ability of EPNL was provided by either proposed or an A-weighted crest factor correction for impulsiveness.

Powell, C. A.↗

Wave mode identification of electrostatic noise observed with ISEE 3 in the deep tail boundary layer

The characteristics of the VLF electrostatic noise observed with ISEE 3 in the low-latitude boundary layer of distant geomagnetic tail are examined using a display format for the wave dynamic spectra different from that used by Scarf et al. (1984). It is shown that the observed noise is composed of impulsive bursts. The results of the detailed analysis of the noise parameters are used to develop a model of plasma wave behavior in the plasma rest frame. A hypothesis is proposed that the wide frequency extent of the noise spectra is composed of Doppler effects of waves propagating nearly omnidirectionally within the plasma rest frame, which is moving with the electron bulk speed. On the basis of this hypothesis, the wavelength of the observed waves were determined from the width of the frequency extent and the measured electron bulk speed. It is shown that the wavelength ranges from 2 to 8 times the plasma Debye length.

Tsutsui, M.↗

Distribution of whistler mode bursts at Venus

Several thousand impulsive whistler mode noise bursts were detected by the Pioneer Venus wave instrument during the first 10 seasons with nightside traversals at low altitudes. The altitude distribution for these events shows that essentially all of the bursts were detected when the orbiter was less than 2000 km above the planet, suggesting that the varying plasma conditions could not maintain coherent whistler mode field-aligned guidance over greater distances. Within the 2000-km range, the distribution of the number of events versus altitude shows that there are two distinct subregions. These results are interpreted in terms of two types of whistler mode propagation from sources below the ionosphere.

Scarf, F. L.↗

Evidence of lightning and volcanic activity on Venus - Pro and con

It is argued that the impulsive 100-Hz noise bursts detected with the use of the electric field antenna on the Pioneer Venus Orbiter (PVO) have plasma wave charcteristics that can only be explained if they are whistler mode signals of a type that can be produced by atmospheric discharges. It is further argued that these data are evidence for lightning and volcanic activity on Venus. A reply contends that the PVO electric field measurements are unrelated to either the lower atmosphere or the surface of Venus.

Scarf, Frederick L.↗