Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “igneous rocks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Aqueous alteration in S-N-C meteorites and implications for weathering products on Mars

Is shergottite, nakhlite, and chassignite (SNC) meteorites are rocks propelled to earth by large meteoroid impacts on Mars, then it is possible to deduce much about Martian igneous petrology and geochemistry. Because SNCs are igneous rocks, however, it was not obvious that they could reveal much about sedimentary and soil petrology and low-temperature geochemistry of Mars. It is important, though, that at least four of eight SNCs carry evidence for low-temperature, extraterrestrial weathering product phases. Evidence is reviewed for Martian weathering and alteration products in SNCs and possible inferences for volatile/regolith interactions, regolith mineralogy, and sinks for the putative hidden volatiles on Mars are outlined.

Gooding, J. L.↗
NASA NTRSDate not supplied

TEMPERATURE CONSTRAINT OF THE MISTASTIN LAKE IMPACT STRUCTURE IMPACT MELT ROCKS

Impact melt is a product of hypervelocity cratering events formed by the instantaneous melting of near-surface target rocks. The temperatures of impact melt upon formation are believed to be superheated, vastly exceeding the liquidus temperature of igneous rocks formed via endogenic processes. However, quantitative understanding of the formation and duration of superheated temperatures remains incomplete. To date, only one datum on the hottest post-shock temperature (>2370 °C) has been derived by Timms et al. (2017) [1]. These authors studied the microstructures and crystallographic orientations preserved within a rim of vermicular ZrO2 of a zircon grain entrained within impact glass at the Mistastin Lake impact structure, Canada. Diagnostic crystallographic orientation indicated the presence of cubic zirconia, requiring a minimum temperature for the impact melt of >2370°C from the dissociation of zircon to cubic zirconia and liquid SiO2. With only one temperature datum, it cannot be stated whether the temperature of the impact melt sheet was homogenous across the entire structure or if the thermal history of the melt varied with spatial distribution. In this study, we present a preliminary investigation of 70 zircon grains, 22 of which exhibit rims of vermicular ZrO2 dissociation textures, similar to those studied by Timms et al. (2017). To acquire a more accurate temperature profile representative of impact melt, zircon crystals were collected from different types of impact melt bearing units, including additional samples of the impact glass studied by Timms et al. (2017). Of the 22 zircon grains with dissociation textures, at least 4 grains in the impact glass show diagnostic evidence of pre-existing cubic zirconia, and 1 grain from a glass-bearing breccia exhibits granular zircon textures, possible evidence of a transition from high-P to high-T conditions. These results show the heterogeneous post-shock temperature distribution of superheated impact melt within the Mistastin impact structure. [1] Timms, N.E., Erickson, T.M., Zanetti, M.R., Pearce, M.A., Cayron, C., Cavosie, A.J., Reddy, S.M., Wittmann, A. and Carpenter, P.K., 2017. Cubic zirconia in> 2370° C impact melt records Earth's hottest crust. Earth and Planetary Science Letters, 477, pp.52-58.

rock↗
NASA NTRS1999

Slate Islands, Lake Superior, Canada: A mid-size, Complex Impact Structure

The target rocks of the 30-32-km diameter Slate Islands impact structure in northern Lake Superior, Canada, are Archean supracrustal and igneous rocks and supracrustal Proterozoic rocks. Shatter cones, pseudotachylites, impact glasses, and microscopic shock metamorphic features were formed during the contact and compression phase of the impact process, followed, during excavation and central uplift, by polymict, clastic matrix breccias in the uplifted target, and by allogenic fall-back breccias (suevite and bunte breccia). Monomict, autoclastic breccias were mainly observed on Mortimer Island and the other outlying islands of the archipelago and were probably generated relatively late in the impact process (central uplift and/or crater modification). The frequency of low index planar shock metamorphic features in quartz was correlated with results from shock experiments to estimate shock pressures experienced by the target rocks. The resulting shock attenuation plan across the archipelago is irregular, probably because the shock wave did not expand from a point or spherical source, and because of the destruction of an originally more regular shock attenuation plan during the central uplift and crater modification stages of the impact process. No impact melt rock bodies have been positively identified on the islands. An impact melt may be present in the annular trough around the islands, though and-based on a weighted mixture of target rocks-may have an intermediate-mafic composition. No such impact melt was found on the archipelago. An Ar-40-Ar-39 release spectrum of a pseudotachylite provides an age of about 436 Ma for the impact structure, substantiating age constraints based on various stratigraphic considerations.

Dressler, B. O.↗
NASA NTRS2003

The Nakhla Martian Meteorite is a Cumulate Igenous Rock. Comment on "Glass-Bearing Inclusions in Nakhla (SNC Meteorite) Augite: Heterogeneously Trapped Phases"

All the properties of the Nakhla Martian meteorite suggest that it is a cumulate igneous rock, formed from a basaltic parental magma. Anomalous magmatic inclusions in Nakhla s augite grains can be explained by disequilibrium processes during crystal growth, and have little significance in the geological history of the meteorite.

Treiman, A. H.↗
NASA NTRS1972

Elastic velocity and Q factor measurements on Apollo 12, 14, and 15 rocks.

The Rayleigh wave velocities (vR) in one Apollo 12, one Apollo 15, and two Apollo 14 rocks were measured by the impulse technique. For 14310 vR = 1.20 km/sec; for 14321 vR = 0.9 km/sec; for 12063, on which the orientation dependence was studied, vR = 1.16-1.59 km/sec; for 15555 vR = 0.32 km/sec; and for synthetic rock 10017 analogue vR = 2.26 km/sec. This represents a larger spread by a factor of 3 than previously reported on lunar igneous rock. Absolute Q factor measurements were performed on one Apollo 14 rock by the vibrating bar technique. Under exposure to high vacuum and low temperatures, the Q factor is shown to increase towards values approaching the low end of the range of estimates from seismic data.

Tittmann, B. R.↗
NASA NTRS1973

Unique characterization of lunar samples by physical properties

The measurement of compressional velocity, shear velocity, static compressibility, and thermal expansion of (1) a suite of shocked rocks fron the Ries impact in Germany, (2) a suite of samples cracked by thermal cycling to high temperatures, (3) many terrestrial igneous rocks, and (4) lunar basalts, gabbroic anorthosites, and breccias, indicate that shock metamorphism is the primary cause for values of physical properties of lunar rocks being diffferent from their intrinsic values. Large scale thermal metamorphism, thermal cycling between temperatures of lunar day and night, large thermal gradients, or thermal fatigue could possibly cause minor cracking in the top few centimeters of the lunar regolith, but are probably not important mechanism for extensively changing values of physical properties of lunar rocks.-

Todd, T.↗
NASA NTRS1992

Mesosiderite clasts with the most extreme positive europium anomalies among solar system rocks

Pigeonite-plagioclase gabbros that occur as clasts in mesosiderites (brecciated stony-iron meteorites) show extreme fractionations of the rare-earth elements (REEs) with larger positive europium anomalies than any previously known for igneous rocks from the earth, moon, or meteorite parent bodies and greater depletions of light REEs relative to heavy REEs than known for comparable cumulate gabbros. The REE pattern for merrillite in one of these clasts is depleted in light REEs and has a large positive europium anomaly as a result of metamorphic equilibration with the silicates. The extreme REE ratios exhibited by the mesosiderite clasts demonstrate that multistage igneous processes must have occurred on some asteroids in the early solar system. Melting of the crust by large-scale impacts or electrical induction from an early T-Tauri-phase sun may be responsible for these processes.

Mittlefehldt, David W.↗
NASA NTRS1995

Discrimination of alkalinity in granitoid Rocks: A potential TIMS application

In mineral exploration, the ability to distinguish and map petrochemical variations of magmatic rocks can be a useful reconnaissance tool. Alkalinity is one such petrochemical parameter and is used in the characterization of granitoid rocks. In quartz normative plutonic rocks, alkalinity is related to the composition and abundance of feldspars. Together with quartz abundance, knowledge of feldspar modes allows the classification of these igneous rocks according to the Streckeisen diagram. Alternative classification schemes rely on whole rock geochemistry instead of mineral identifications. The relative ease of obtaining whole rock analyses means that geochemical classifications tend to be favored in exploration geology. But the technique of thermal infrared spectroscopy of rocks yields information on mineralogy and is one that can be applied remotely. The goal of the current work then is to establish whether data from TIMS can be used to distinguish the mineralogical variations that relate to alkalinity. An ideal opportunity to test this thesis arises from the work presented in a paper by Dewitt (1989). This paper contains the results of mapping and analysis of Proterozoic plutonic rocks in north-central Arizona. The map resulting from this work delineates plutons according to alkalinity in an effort to establish a trend or polarity in the regional magmatism. Also contained within this paper are brief descriptions of the mineralogy of half of the region's plutons. This combination of mineralogical and geochemical information was the rationale behind choosing this area as a site for TIMS over flights. A portion of the region centered on the northern Bradshaw Mountains was selected because it contains plutons of all three alkalinity classifications (alkali-calcic, calc-alkalic, and calic) present on DeWitt's map within a relatively small area. The site was flown in August of 1994 and the data received a few days before the writing of this manuscript. Most of this paper is devoted to the description of laboratory based spectroscopy and spectral simulations. These are required to gain insight into the correct procedures for enhancing the relatively small differences in the low spectral resolution TIMS data.

Ruff, Steven W.↗
NASA NTRS2002

Element-Element Correlations Among Martian Meteorite Bulk Compositions: Peculiarities Explained(?) by Mixing, with Implications for the Composition of Mars

Most estimates of the chemical corn position of Mars' mantle and core derive from elementelement correlations bulk analyses of Martian meteorites [I-31. To use the correlations in this manner assumes implicitly that they reflect mineraVmelt fractionations (e.g., partial melting, fractional crystallization, accumulation) among a cogenetic suite of igneous rocks. However, similar correlations can zppear from mixing of chemical components, and need not imply that the components were cogenetic nor that they had an igneous origin. Several aspects of the elemental and isotopic chem istries of the Martian meteorites can be explained by mixing of geochemical components (mantle or crustal), e.g. [5,6]. Thus, it is worth asking whether mixing rektions might be seen in bulk chemical data, and (if so) whether the mixing components can be used to infer average planet or mantle compositions.

Treiman, A. H.↗
NASA NTRS1983

Antarctic meteorite ALHA81005 - Not just another lunar anorthositic norite

It is contended that 81005 requires the existence of a component that is poor in large-ion lithophile elements, at least as mafic as anorthositic norite, and magnesian rather than ferroan. While no such component has yet been observed in nearside samples, as an end-member in mixing models it would conveniently account for the composition of some polymict samples that heretofore have been difficult to explain as mixtures of endogenous rock types. The results presented here therefore suggest that the early lunar crust contained a significant proportion of both ferroan and magnesian anorthositic norites as primary igneous rocks. It is acknowledged that this conclusion is at variance with models that treat materials of anorthositic norite composition as mixtures of anorthosite plus norite, troctolite, and dunite.

Korotev, R. L.↗
NASA NTRS1977

Petrographic and petrological study of lunar rock materials

Impact melts and breccias from the Apollo 15 and 16 landing sites were examined optically and by electron microscope/microprobe. Major and trace element abundances were determined for selected samples. Apollo 16 breccias contained impact melts, metamorphic and primary igneous rocks. Metamorphic rocks may be the equivalents of the impact melts. Apollo 15 breccias studied were fragment-laden melts derived from gabbro and more basalt target rocks.

Winzer, S. R.↗
NASA NTRS1980

Lu-Hf total-rock isochron for the eucrite meteorites

The isotope Lu-176 (2.6% of natural lutetium) decays by beta(-) to Hf-176, with a long half life. The first Lu-Hf isochron is presented. The eucrite meteorites, a suite of planetary igneous rocks of known age, 4,550 Myr, define a 10-point total-rock isochron with a slope of 0.0934 + or - 40, leading to a value of 3.53 + or - 0.14 x 10 to the 10th yr for the beta(-) decay half life of Lu-176. The isochron intercept of 0.27973 + or - 12 gives the initial Hf-176/Hf-177 for the inner solar system at the time of accretion.

Patchett, P. J.↗
NASA NTRS2007

Quantifying the Complete Mineral Assemblages in Rocks of GUSEV Crater, Mars

Determining the complete mineralogy of Mars rocks by remote sensing has remained a challenge, because of inherent limitations in the minerals that can be detected and uncertainties in spectral modeling. A subset of the igneous rocks of Gusev crater provide a unique opportunity to determine modal mineralogy, because of limited alteration and the analytical capabilities of the Athena instrument package. Here we estimate the absolute (wt. %) abundances of Fe-bearing minerals from Moessbauer spectra (previously reported only as "areas for component subspectra"), and compare these results to the normative mineralogy calculated from APXS elemental analyses. We also test our preferred mineralogy by comparison of Mini-TES spectra with synthetic thermal emission spectra.

McSween, H. Y.↗
NASA NTRS1975

Lunar polymict breccia 14321 - A petrographic study

A detailed description is given of the petrology and mineralogy of lunar polymict breccia 14321, which was returned from the Fra Mauro formation on the Apollo 14 mission. Electron probe microanalysis and microscopic studies were made of seven petrographic thin sections of the rock. Three broad genetic classes were found in the thin sections: (1) rounded fragments of pre-existing microbreccia with microscopically recognizable crystal and lithic fragments incorporated in a dark matrix; (2) igneous rock fragments of basaltic composition; and (3) a light colored, somewhat friable matrix which cements the other two classes. The components are classified according to chemical, mineralogical textural, and chronological criteria.

Grieve, R. A.↗
NASA NTRS1978

Lunar breccias, petrology, and earth planetary structure

Topics covered include: (1) petrologic studies of poikiloblastic textured rocks; (2) petrology of aluminous mare basalts in breccia 14063; (3) petrology of Apollo 15 breccia 15459; (4) high-alumina mare basalts; (5) some petrological aspects of imbrium stratigraphy; (6) petrology of lunar rocks and implication to lunar evolution; (7) the crystallization trends of spinels in Tertiary basalts from Rhum and Muck and their petrogenetic significance; (8) the geology and evolution of the Cayman Trench; (9) The petrochemistry of igneous rocks from the Cayman Trench and the Captains Bay Pluton, Unalaska Island and their relation to tectonic processes at plate margins; and (10) the oxide and silicate mineral chemistry of a Kimberlite from the Premier Mine with implications for the evolution of kimberlitic magma.

Ridley, W. I.↗
NASA NTRS1988

The basis for the spectral behaviour of silicates in the thermal infrared and applications to remote sensing

Variations in the thermal infrared (TIR) spectral response of silicate rocks is related to changes in the structures and divalent cation contents of the minerals which form the rocks. These considerations lead to a chemical parameter, SCFM, which reflects mineral structures, rock types, and their spectra. The parameter is the ratio of silica to the abundance of depolymerizing cations, defined as SCFM = SiO2/SiO2 + CaO + MgO + FeO. Parameter SCFM is therefore proposed for use in TIR remote sensing of igneous rocks. It is also demonstrated that two or three broad bands are sufficient for distinguishing among major rock types and the system noise has little effect on the quality of the results. These factors can be traded off against improved spatial resolution in instrument design.

Walter, L. S.↗
NASA NTRS2013

A Renewed Search for Elusive Lunar Granophyres

Recent remote sensing studies [e.g., 1-3] indicate that several un-sampled regions of the Moon have significantly higher concentrations of silicic material (also high in [K], [U], and [Th]) than sampled regions. Within these areas are morphological features that are best explained by the existence of chemically evolved volcanic rocks. Observations of silicic domes [e.g., 1-5] suggest that sizable networks of silicic melt were present during crust-formation. Because of these recent findings there is a renewed interest in the petrogenesis of lunar, felsic igneous rocks. Specific questions are: (1) when were these magmas generated?, and (2) what was the source material? The two main hypotheses for generating silicic melts on Earth are fractional crystallization or partial melting of preexisting crust. On the Moon silicic melts are thought to have been generated during extreme fractional crystallization involving end-stage silicate liquid immiscibility (SLI) [e.g. 6, 7]. However, SLI cannot account for the production of significant volumes of silicic melt and its wide distribution, as reported by the remote global surveys [1, 2, 3]. In addition, experimental and natural products of SLI show that U and Th, which are abundant in the lunar granites and seen in the remote sensing data of the domes, are preferentially partitioned into the depolymerized ferrobasaltic magma and not the silicic portion [8, 9]. If SLI is not the mechanism that generated silicic magmas on the Moon then alternative processes such as fractional crystallization (only crystal-liquid separation) or partial melting should be considered as viable possibilities to be tested.

Mills, R. D.↗
NASA NTRS2013

A Thorough Search for Elusive Lunar Granophyres

Recent remote sensing studies [e.g., 1-3] indicate that several un-sampled regions of the Moon have significantly higher concentrations of silicic material (also high in [K], [U], and [Th]) than sampled regions. Within these areas are morphological features that are best explained by the existence of chemically evolved volcanic rocks. Observations of silicic domes [e.g., 1-5] suggest that sizable networks of silicic melt were present during crust-formation. Because of these recent findings there is a renewed interest in the petrogenesis of lunar, felsic igneous rocks. Specific questions are: (1) when were these magmas generated?, and (2) what was the source material? The two main hypotheses for generating silicic melts on Earth are fractional crystallization or partial melting of preexisting crust. On the Moon silicic melts are thought to have been generated during extreme fractional crystallization involving end-stage silicate liquid immiscibility (SLI) [e.g. 6, 7]. However, SLI cannot account for the production of significant volumes of silicic melt and its wide distribution, as reported by the remote global surveys [1, 2, 3]. In addition, experimental and natural products of SLI show that U and Th, which are abundant in the lunar granites and seen in the remote sensing data of the domes, are preferentially partitioned into the depolymerized ferrobasaltic magma and not the silicic portion [8, 9]. If SLI is not the mechanism that generated silicic magmas on the Moon then alternative processes such as fractional crystallization (only crystal-liquid separation) or partial melting should be considered as viable possibilities to be tested.

Mills, Ryan D.↗