Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hydrostaticity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Composition Dependence of the Hydrostatic Pressure Coefficients of the Bandgap of ZnSe(1-x)Te(x) Alloys

Optical absorption experiments have been performed using diamond anvil cells to measure the hydrostatic pressure dependence of the fundamental bandgap of ZnSe(sub 1-xTe(sub x) alloys over the entire composition range. The first and second-order pressure coefficients are obtained as a function of composition. Starting from the ZnSe side, the magnitude of both coefficients increases slowly until x approx. 0.7, where the ambient-pressure bandgap reaches a minimum. For larger values of x the coefficients rapidly approach the values of ZnTe. The large deviations of the pressure coefficients from the linear interpolation between ZnSe and ZnTe are explained in terms of the band anticrossing model.

Wu, J.↗

Three-Dimensional Digital Image Correlation of a Composite Overwrapped Pressure Vessel During Hydrostatic Pressure Tests

Ambient temperature hydrostatic pressurization tests were conducted on a composite overwrapped pressure vessel (COPV) to understand the fiber stresses in COPV components. Two three-dimensional digital image correlation systems with high speed cameras were used in the evaluation to provide full field displacement and strain data for each pressurization test. A few of the key findings will be discussed including how the principal strains provided better insight into system behavior than traditional gauges, a high localized strain that was measured where gages were not present and the challenges of measuring curved surfaces with the use of a 1.25 in. thick layered polycarbonate panel that protected the cameras.

Revilock, Duane M., Jr.↗

Hydrostatic and Physiologic Contributions to Intraocular Pressure Change During Postural Change

Many studies have observed that intraocular pressure (IOP) is dependent on tilt angle () during postural change. In this work, we aggregated 36 independent datasets from 30 published articles, representing 821 subjects, which reported data on IOP during postural change. From this data, we developed a generalized quantitative relationship between IOP and . We then compared the experimentally derived results to simulated predictions generated by our lumped parameter model of the eye, LPEye, considering only hydrostatic effects. The difference between the analytical and simulated values of IOP can be used to quantify the physiologic regulatory contribution.

Nelson, E.S.↗

Comparison of Dust Optical Depth From Multi-Sensor Products and MONARCH (Multiscale Online Non-hydrostatic AtmospheRe CHemistry) Dust Reanalysis Over North Africa, the Middle East, and Europe

Aerosol reanalysis datasets are model-based, observationally constrained, continuous 3D aerosol fields with a relatively high temporal frequency that can be used to assess aerosol variations and trends, climate effects, and impacts on socioeconomic sectors, such as health. Here we compare and assess the recently published MONARCH (Multiscale Online Non-hydrostatic AtmospheRe CHemistry) high-resolution regional desert dust reanalysis over northern Africa, the Middle East, and Europe (NAMEE) with a combination of ground-based observations and space-based dust retrievals and products. In particular, we compare the total and coarse dust optical depth (DOD) from the new reanalysis with DOD products derived from MODIS (MODerate resolution Imaging Spectroradiometer), MISR (Multi-angle Imaging SpectroRadiometer), and IASI (Infrared Atmospheric Sounding Interferometer) spaceborne instruments. Despite the larger uncertainties, satellite-based datasets provide a better geographical coverage than ground-based observations, and the use of different retrievals and products allows at least partially overcoming some single-product weaknesses in the comparison. Nevertheless, limitations and uncertainties due to the type of sensor, its operating principle, its sensitivity, its temporal and spatial resolution, and the methodology for retrieving or further deriving dust products are factors that bias the reanalysis assessment. We, therefore, also use ground-based DOD observations provided by 238 stations of the AERONET (AErosol RObotic NETwork) located within the NAMEE region as a reference evaluation dataset. In particular, prior to the reanalysis assessment, the satellite datasets were evaluated against AERONET, showing moderate underestimations in the vicinities of dust sources and downwind regions, whereas small or significant overestimations, depending on the dataset, can be found in the remote regions. Taking these results into consideration, the MONARCH reanalysis assessment shows that total and coarse-DOD simulations are consistent with satellite- and ground-based data, qualitatively capturing the major dust sources in the area in addition to the dust transport patterns. Moreover, the MONARCH reanalysis reproduces the seasonal dust cycle, identifying the increased dust activity that occurred in the NAMEE region during spring and summer. The quantitative comparison between the MONARCH reanalysis DOD and satellite multi-sensor products shows that the reanalysis tends to slightly overestimate the desert dust that is emitted from the source regions and underestimate the transported dust over the outflow regions, implying that the model's removal of dust particles from the atmosphere, through deposition processes, is too effective. More specifically, small positive biases are found over the Sahara desert (0.04) and negative biases over the Atlantic Ocean and the Arabian Sea (−0.04), which constitute the main pathways of the long-range dust transport. Considering the DOD values recorded on average there, such discrepancies can be considered low, as the low relative bias in the Sahara desert (< 50 %) and over the adjacent maritime regions (< 100 %) certifies. Similarly, over areas with intense dust activity, the linear correlation coefficient between the MONARCH reanalysis simulations and the ensemble of the satellite products is significantly high for both total and coarse DOD, reaching 0.8 over the Middle East, the Atlantic Ocean, and the Arabian Sea and exceeding it over the African continent. Moreover, the low relative biases and high correlations are associated with regions for which large numbers of observations are available, thus allowing for robust reanalysis assessment.

Michail Mytilinaios↗

Designing Magnetic Properties in CrSBr through Hydrostatic Pressure and Ligand Substitution

Abstract Magnetic van der Waals (vdW) materials are a promising platform for producing atomically thin spintronic and optoelectronic devices. The A‐type antiferromagnet CrSBr has emerged as a particularly exciting material due to its high magnetic ordering temperature, semiconducting electrical properties, and enhanced chemical stability compared to other vdW magnets. Exploring mechanisms to tune its magnetic properties will facilitate the development of nanoscale devices based on vdW materials with designer magnetic properties. Here it is investigated how the magnetic properties of CrSBr change under pressure and ligand substitution. Pressure compresses the unit cell, increasing the interlayer exchange energy while lowering the Néel temperature. Ligand substitution, realized synthetically through Cl alloying, anisotropically compresses the unit cell and suppresses the Cr‐halogen covalency, reducing the magnetocrystalline anisotropy energy and decreasing the Néel temperature. A detailed structural analysis combined with first‐principles calculations reveals that alterations in the magnetic properties are intricately related to changes in direct Cr–Cr exchange interactions and the Cr–anion superexchange pathways. Further, it is demonstrated that Cl alloying enables chemical tuning of the interlayer coupling from antiferromagnetic to ferromagnetic, which is unique among known two‐dimensional magnets.

Telford, Evan J.↗

Investigating Inherent Numerical Stabilization for the Moist, Compressible, Non‐Hydrostatic Euler Equations on Collocated Grids

This study investigates inherent numerical dissipation due to upwind fluxes and reconstruction strategies for collocated Finite-Volume integration of the Euler equations. Idealized supercell simulations are used without any explicit dissipation. Flux terms are split into: mass flux, pressure, and advected quantities. They are computed with the following upwind strategies: central, advectively upwind, and acoustically upwind. This is performed for third and ninth-order-accurate reconstructions with and without Weighted Essentially Non-Oscillatory limiting. Acoustic-only upwinding for pressure and mass flux terms and advective-only upwinding for advected quantities is the most flexible simplification found. It reduces data movement and computations. Assuming a constant speed of sound in acoustic upwinding gives similar results to using the true speed of sound. Dissipation from upwind adapts automatically to grid spacing, time step, reconstruction accuracy, and flow smoothness. While stability is maintained even at 21st-order spatial accuracy, there is a limit to the spatial order of accuracy for which upwinding alone can create a realizable solution in the conditions of this study. Convex combinations of upwind and central solutions for flux terms also reduced dissipation, but as the central proportion grows, solutions become physically unrealizable. The range of length scales of the kinetic energy spectra can be extended along k −5/3 to smaller spatial scales by reducing dissipation either with higher-order reconstructions or using convex combinations of upwind and central fluxes. However, not all extensions of the length scale range along k −5/3 exhibit physically realizable solutions, even though the spectra appear to be physical.

54 ENVIRONMENTAL SCIENCES↗

Elastic constants in monocrystalline tungsten under quasi-hydrostatic pressures to 11.3 GPa

Compressional (P) and shear (S) wave velocities of tungsten single crystals along the [100] and [110] directions were measured using ultrasonic interferometry at room temperature up to 11.3 GPa. Least-squares fitting of $V$$^{[100]}_{P}$, $V$$^{[100]}_{S}$, $V$$^{[110]}_{P}$, and pressure to finite strain (FS) equations yields the elastic constants: C 11 = 523.5(5) GPa, C 12 = 205.1(32) GPa, and C 44 = 160.8(4) GPa, along with their respective pressure derivatives: $C$$^{′}_{11}$ = 6.20(2), $C$$^{′}_{12}$ = 3.35(1), and $C$$^{′}_{44}$ = 1.65(6). Using the Voigt–Reuss–Hill approximation, the elastic moduli were derived as K S0 = 311.2(22) GPa and G 0 = 160.2(7)GPa, along with their respective pressure derivatives: $K$$^{′}_{S0}$ = 4.30(4) and $G$$^{′}_{0}$ = 1.56(1). The Debye temperature of tungsten was determined to be 380.7(8) K, showing good agreement with previous calorimetric measurements. The elastic anisotropy increases slightly from 1.01(1) at ambient pressure to 1.03(1) at 11.3 GPa, suggesting that tungsten remains nearly isotropic under compression. Poisson's ratio slightly increased from 0.281(3) to 0.288(3) with pressure. Additionally, Pugh's ratio decreased from 0.512(4) to 0.494(4), while Pettifor's ratio increased from 0.148(10) to 0.175(10) as pressure reached 11.3 GPa. These results suggest that tungsten is weakly ductile compared to the critical thresholds for ductile behavior (i.e., Pugh's ratio <0.6 and Pettifor's ratio >0, indicating ductile behavior), but that its ductility increases marginally under pressure.

Wang, Ran [Stony Brook University, NY (United Stat↗

Influence of hydrostatic pressure on hidden order, the Kondo lattice, and magnetism in URu 2 Si 2-x P x

Within the chemical substitution series URu 2 Si 2-x P x , there is an evolution in the ground-state behavior from hidden ordered (HO) for x ≲ 0.03, to Kondo lattice behavior with no ordering (NO) for 0.03 ≲ x ≲ 0.26, to antiferromagnetism (AFM-2) for 0.26 ≲ x ≲ 0.5 [A. Gallagher et al., Nat. Commun. 7, 10712 (2016); A. Gallagher et al., J. Phys.: Condens. Matter 29, 024004 (2016)]. To better understand what factors control this behavior, temperature-dependent electrical resistivity measurements are performed for this series under applied pressures P up to 20.5 kbar. Specimens in the HO x region show similarities to the parent compound, where HO transforms into antiferromagnetism (AFM-1) at a critical pressure (P c ). P c decreases with increasing x and collapses towards P = 0 near x ≈ 0.03, suggesting that AFM-1 occurs at ambient pressure for this concentration. No pressure-induced phase transitions are observed in the NO x region and the AFM-2 state is only weakly suppressed by P. Measurements further reveal that AFM-1 and AFM-2 are distinct from each other. Calculations of the wave functions using the tight-binding Hartree-Fock approximation are performed and show (i) that the radial probability distributions for the phosphorus ions are more tightly bound than those for the silicon and (ii) that the energy difference between the orbitals decreases with increasing x. The cumulative effect of these two factors is that Si → P substitution decreases the hybridization strength, which correlates with the weakening of HO. At large x, additional effects such as electrical charge tuning also play an important role in determining the ground-state

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the magneto-hydrostatic theory of sunspots.

Sunspot models used to derive relations between coolness of spot and its magnetic field strength and between magnetic field strength and ratio of mixing length to pressure scale height

SUNSPOT↗