Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “high-density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Probing the γ -Ray Emission Origin of Two Star-forming Galaxies NGC 2403 and NGC 3424 with the Fermi-LAT

Star-forming galaxies (SFGs) are a subclass of γ-ray emitters, and a correlation between their γ-ray luminosity (L γ ) and the total infrared (IR) luminosity (L IR ) has been established based on the Fermi Large Area Telescope (LAT) data. NGC 2403 and NGC 3424 have been reported as outliers in the L γ –L IR correlation with light curves showing significant variability, which contrasts with the temporally stable γ-ray emission in other SFGs, originating primarily from cosmic rays interacting with interstellar medium. In this study, we reanalyze the γ-ray emission in the directions of NGC 2403 and NGC 3424 using more than 16.5 yr Fermi-LAT data. NGC 3424 is found to be spatially coincident with the detected γ-ray source, while NGC 2403 is significantly offset from the nearest γ-ray source, suggesting an implausible association. We confirm the previously reported variability of both γ-ray sources and the significant deviation from the L γ –L IR correlation when assuming an association of both γ-ray sources with the two galaxies. Our findings lend further support to the interpretation that their γ-ray emission is driven primarily by alternative radiative processes—rather than by star formation activity—such as the ejecta of the Type IIP supernova SN 2004dj in NGC 2403 interacting with a surrounding high-density shell and an obscured active galactic nucleus in NGC 3424.

Liu, Linjie [Chinese Academy of Sciences (CAS), Ku↗
DOE OSTI2025

Origin of the ring ellipticity in the black hole images of M87*

We investigate the origin of the elliptical ring structure observed in the images of the supermassive black hole M87*, aiming to disentangle contributions from gravitational, astrophysical, and imaging effects. Leveraging the enhanced capabilities of the Event Horizon Telescope (EHT)'s 2018 array, including improved (u,v)-coverage from the Greenland Telescope, we measured the ring's ellipticity using five independent imaging methods, obtaining a consistent average value of τ = 0.08−0.02+0.03 with a position angle of ξ = 50.1−7.6+6.2 degrees. To interpret this measurement, we compared it to general relativistic magnetohydrodynamic (GRMHD) simulations spanning a wide range of physical parameters including the thermal or nonthermal electron distribution function, spins, and ion-to-electron temperature ratios in both low- and high-density regions. We find no statistically significant correlation between spin and ellipticity in GRMHD images. Instead, we identify a correlation between ellipticity and the fraction of non-ring emission, particularly in nonthermal models and models with higher jet emission. These results indicate that the ellipticity measured from the M87* emission structure is consistent with that expected from simulations of turbulent accretion flows around black holes, where it is dominated by astrophysical effects rather than gravitational ones. Future high-resolution imaging, including space very long baseline interferometry and long-term monitoring, will be essential to isolate gravitational signatures from astrophysical effects.Key words: accretion, accretion disks / black hole physics / gravitation / galaxies: active** These authors have contributed equally to this work.*** NASA Hubble Fellowship Program, Einstein Fellow.† Deceased.

Dahale, Rohan [Granada U., Theor. Phys. Astrophys.↗
DOE OSTI2025

Application of PRIM for understanding patterns in carbon dioxide model-observation differences

Reducing uncertainties in regional carbon balances requires a better understanding of CO 2 transport in synoptic weather systems. Here, we apply the Patient Rule Induction Method (PRIM), a data-mining method to identify high-density regions for a target-class within an input parameter space, to airborne observations of potential temperature, wind speed, water vapor mixing ratio, and CO 2 dry mol fraction gathered during the Atmospheric Carbon and Transport (ACT)-America Summer 2016 and Winter 2017 campaigns. ACT observations were targeted at expert-designated cases of fair weather and near-frontal warm and cold sector air at atmospheric boundary-layer, lower-, and higher free tropospheric levels (ABL, LFT, and HFT, respectively). We investigate atmospheric characteristics of these pre-defined cases and associated CO 2 model-observation-differences in the mesoscale WRF-Chem model. PRIM results separate winter- and summertime observations as well as observations from ABL, LFT, and HFT with enrichment factors of 4.0–20.5 inside the PRIM box compared to the entire dataset but cannot distinguish between near-frontal warm and cold sector observations in the higher free troposphere. Analyzing of the parameter space constrained by PRIM, we find that large magnitude model observation differences preferentially associated with times when atmospheric conditions are less typical. This association suggests that PRIM could provide a useful tool for isolating atmospheric conditions with large-magnitude and non-Gaussian CO 2 -residuals for targeted transport model evaluation and to potentially improve inversion results during synoptically active periods.

Gerken, Tobias [James Madison Univ., Harrisonburg,↗
DOE OSTI2026

Seasonal Precipitation Classification during Surface Atmosphere Integrated Field Laboratory Campaign

The Surface Atmosphere Integrated Field Laboratory (SAIL) campaign, conducted from September 2021 to June 2023 in Crested Butte, Colorado, aimed to characterize precipitation processes in the Upper Colorado River Basin (UCRB). This increased observations of snowfall accumulation in this hydrologically significant watershed would be useful for quantitative precipitation estimates (QPE). Therefore, the Surface Quantitative Precipitation Estimate (SQUIRE) product was developed using the ARM-supported Colorado State University (CSU) X-band Precipitation Radar. Although SQUIRE will be only released for snowfall, by categorizing precipitation types, users can effectively utilize relevant datasets under diverse meteorological conditions. Moreover, the dataset facilitates validation of the QPE product and the analysis of seasonal variations in precipitation types at the surface. Hydrometeors classes are organized based on their phase and physical characteristics mapping the CSU (both winter Summer) and Py-ART classifications into four groups. 1. Liquid Precipitation: includs drizzle, rain, and large raindrops. 2. Frozen Snow and Ice : Pure Snow, combining ice crystals, aggregates, and vertically oriented ice structures. 3. Dense and Large frozen hydrometeors: including low- and high-density graupel and dry hail. 4.Melting: Wet Snow and Melting Hail, hydrometeors exhibiting both liquid and frozen characteristics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Exploring the QCD Phase Diagram

Exploring the QCD phase diagram through relativistic heavy-ion collisions is a primary goal of modern nuclear physics. This contribution focuses on fluctuations and correlations of conserved charges — specifically net-baryon and net-charge cumulants — as sensitive probes of the phase structure and the QCD critical point. We discuss recent theoretical and experimental advancements, highlighting constraints from lattice QCD and new results from the RHIC Beam Energy Scan program. Key challenges in theory-to-experiment comparisons at high baryon density are discussed, alongside the systematic requirements for meaningful physical interpretation. Finally, we identify open issues and outline the discovery potential of future low-energy experiments, such as CBM, in resolving the high-density regime of the phase diagram.

Koch, V. [Lawrence Berkeley National Laboratory (L↗
NASA NTRS1966

Mechanism facilitates coating of inner surfaces of metal cylinders

Cylinder is rotated about shielded hot filament to vapor deposit thin coatings of aluminum or other metallic substances on the inner surface of a cylinder while avoiding heat-producing high-density current flow which causes outgassing of the coating surface. This method is acceptable for glass or metal.

Billingsley, J. M.↗
NASA NTRS1989

Growth and characterization of single crystal insulators on silicon

An overview of the growth and characterization of epitaxial insulators on semiconductors is presented. The potential applications include semiconductor-on-insulator structures, three-dimensional and/or high-density integrated circuits, optoelectronic applications such as integrated waveguides and improved gate insulators. The growth and physical characterization of epitaxial fluorides on semiconductors are discussed. Consideration is also given to the epitaxial overgrowth of epitaxial metal layers with CaF2 as well as to the formation of a novel superlattice of Ca particles in epitaxial CaF2.

Schowalter, Leo J.↗
NASA NTRS1946

Bending-torsion flutter calculations modified by subsonic compressibility corrections

A number of calculations of bending-torsion wing flutter are made at two Mach numbers, m=0 (incompressible case) and m=0.7, and results are compared. The air forces employed for the case of m=0.7 are based on Frazer's recalculation of Possio's results, which are derived on the assumption of small disturbances to the main flow. For ordinary wings of normal density and of low bending frequency in comparison with torsion frequency, the compressibility correction to the flutter speed appears to be of the order of a few percent; whereas the correction to flutter speed for high-density wing sections, such as propeller sections, and to the wing-divergence speed in general, may be based on a rule using the (1 - m(2))1/4 factor and, for m=0.7, represents a decrease of the order of 17 percent.

Garrick, I E↗
NASA NTRS1951

Correlation of physical properties with molecular structure for some dicyclic hydrocarbons having high thermal-energy release per unit volume

As part of a program to study the correlation between molecular structure and physical properties of high-density hydrocarbons, the net heats of combustion, melting points, boiling points, densities, and kinematic viscosities of some hydrocarbons in the 2-n-alkylbiphenyl, 1,1-diphenylalkane, diphenylalkane, 1,1-dicyclohexylalkane, and dicyclohexylalkane series are presented.

Wise, P H↗
NASA NTRS1960

The Hot-Pressing of Hafnium Carbide (Melting Point, 7030 F)

An investigation was undertaken to determine the effects of the hot-pressing variables (temperature, pressure, and time) on the density and grain size of hafnium carbide disks. The purpose was to provide information necessary for the production of high-density test shapes for the determination of physical and mechanical properties. Hot-pressing of -325 mesh hafnium carbide powder was accomplished with a hydraulic press and an inductively heated graphite die assembly. The ranges investigated for each variable were as follows: temperature, 3500 to 4870 F; pressure, 1000 to 6030 pounds per square inch; and time, 5 to 60 minutes. Hafnium carbide bodies of approximately 98 percent theoretical density can be produced under the following minimal conditions: 4230 F, 3500 pounds per square inch, and 15 minutes. Further increases in temperature and time resulted only in greater grain size.

Sanders, William A.↗
NASA NTRS2020

The Slow Demise of the Long-Lived Sn 2005ip

The Type IIn supernova (SN IIn) 2005ip is one of the most well-studied and long-lasting examples of an SN interacting with its circumstellar environment. The optical light curve plateaued at a nearly constant level for more than five years, suggesting ongoing shock interaction with an extended and clumpy circumstellar medium (CSM). Here, we present continued observations of the SN from ∼1000 to 5000 d post-explosion at all wavelengths, including X-ray, ultraviolet, near-infrared (NIR), and mid-infrared. The UV spectra probe the pre-explosion mass loss and show evidence for CNO processing. From the bolometric light curve, we find that the total radiated energy is in excess of 10 50 erg, the progenitor star’s pre-explosion mass-loss rate was >~ 1 × 10 −2 Mꙩ yr −1 , and the total mass lost shortly before explosion was >~1Mꙩ, though the mass lost could have been considerably larger depending on the efficiency for the conversion of kinetic energy to radiation. The ultraviolet through NIR spectrum is characterized by two high-density components, one with narrow high-ionization lines, and one with broader low-ionization H I, He I, [OI], Mg II, and Fe II lines. The rich Fe II spectrum is strongly affected by Lyα fluorescence, consistent with spectral modelling. Both the Balmer and He I lines indicate a decreasing CSM density during the late interaction period. We find similarities to SN 1988Z, which shows a comparable change in spectrum at around the same time during its very slow decline. These results suggest that, at long last, the shock interaction in SN 2005ip may finally be on the decline.

stars↗
DOE OSTI2025

Measurement of the Neutron Electromagnetic Form Factors at High Momentum Transfer Using a Polarized 3He Target at Jefferson Lab

Ever since the composite structure of nucleons was uncovered, many experiments have been commissioned with the purpose of extracting parameters that shape our understanding of this structure. Form factors are powerful tools that rest at the forefront of the nucleon structure study. In the non-relativistic limit, they describe the magnetic and charge distributions inside the nucleon. The GEn-II experiment, which ran in Hall A of Jefferson Lab as a part of the SuperBigbite Spectrometer (SBS) program, aimed to extract the ratio of the neutron’s electric to magnetic Sachs form factors (GnE/GnM. This was accomplished using the double polarization technique: scattering polarized electrons with initial energies up to 8.45 GeV off high-density polarized 3He targets. The experiment was a coincidence measurement, with the scattered electrons detected in the BigBite Spectrometer and the recoil nucleons in a hadron calorimeter, a part of the SuperBigbite Spectrometer. The convection-style target cells used in this experiment have a 60cm long target chamber, an increase from the 40 cm cell used in the most recent polarized 3He target experiment. In addition, the cells were optically pumped from two sides of the pumping chamber. These improvements in design and functionality introduced world-record-breaking luminosity. This thesis presents preliminary results of the GEn-II experiment for the following 4-momentum transfer (Q2) values: 2.93, 6.76, and 9.78 GeV2, in addition to target performance and preliminary polarimetry results.

Presley, Hunter [Univ. of Virginia, Charlottesvill↗
DOE OSTI2025

Developing New Fuels for High Performance Research Reactors

The National Nuclear Security Administration (NNSA) Material Management and Minimization (M3) program works globally to minimize the civilian use of highly enriched uranium (HEU), a weapon-usable nuclear material. Supporting this effort, M3’s Office of Reactor Conversion and Uranium Supply is developing new fuels capable of converting research reactors from HEU fuel to high-assay low-enriched uranium (HALEU) fuel. Some of the remaining research and test reactors (RTRs) operating on HEU today have unique designs, fuel configurations, and demanding performance requirements that cannot be met with an existing regulatory-approved low-enriched uranium (LEU) fuel. M3, DOE’s national laboratories, and other industry partners are qualifying new high-density LEU fuels to convert these RTRs while maintaining their unique capabilities supporting a wide variety of science and technology research in areas such as medicine, industry, defense, education, and training. Current efforts are focused on two options for the remaining US high-performance research reactor conversions: a monolithic uranium 10wt% molybdenum (U-10Mo) fuel form and a dispersion uranium silicide fuel form. This paper reviews the history and status of M3’s fuel qualification efforts for the U-10Mo LEU fuel form.

Montgomery, Rose [ORNL] (ORCID:0000000286038936)↗
DOE OSTI2025

LC-Opt: Benchmarking Reinforcement Learning and Agentic AI for End-to-End Liquid Cooling Optimization in Data Centers

Liquid cooling is critical for thermal management in high-density data centers with the rising AI workloads. However, machine learning-based controllers are essential to unlock greater energy efficiency and reliability, promoting sustainability. We present LC-Opt, a Sustainable Liquid Cooling (LC) benchmark environment, for reinforcement learning (RL) control strategies in energy-efficient liquid cooling of high-performance computing (HPC) systems. Built on the baseline of a high-fidelity digital twin of Oak Ridge National Lab's Frontier Supercomputer cooling system, LC-Opt provides detailed Modelica-based end-to-end models spanning site-level cooling towers to data center cabinets and server blade groups. RL agents optimize critical thermal controls like liquid supply temperature, flow rate, and granular valve actuation at the IT cabinet level, as well as cooling tower (CT) setpoints through a Gymnasium interface, with dynamic changes in workloads. This environment creates a multi-objective real-time optimization challenge balancing local thermal regulation and global energy efficiency, and also supports additional components like a heat recovery unit (HRU). We benchmark centralized and decentralized multi-agent RL approaches, demonstrate policy distillation into decision and regression trees for interpretable control, and explore LLM-based methods that explain control actions in natural language through an agentic mesh architecture designed to foster user trust and simplify system management. LC-Opt democratizes access to detailed, customizable liquid cooling models, enabling the ML community, operators, and vendors to develop sustainable data center liquid cooling control solutions.

Naug, Avisek [Hewlett Packard Enterprise]↗
DOE OSTI2026

Study of Epoxy Sealant Layer for Use in Tank Bottom Refurbishment for the DOE EM Tank Waste R&D Program

This study addresses the DOE National Laboratory Program on Hanford Tank Waste Cleanup Research and Development, focusing on tank waste retrieval, transport, and closure. Millions of gallons of high-level waste are stored in the double shell tanks (DSTs) at Hanford site. The waste is stored in the primary tank, while the secondary shell acts as a buffer between the primary tank and environment. The DSTs’ bottoms could be corroded due to the corrosive waste properties and contents. Therefore, they are being emptied, and refurbishment is needed before waste storage continues. SRNL addresses the refurbishment of still operational DSTs bottoms with a two-layer refurbishment approach. We propose that the bottom layer consists of a high-density cementitious material to shield the epoxy top layer from radioactive residuals, while the top layer serves as an epoxy sealant. This work focuses on the experimental evaluation on the formulation and testing of the epoxy layer.

Blue, Kareen [Savannah River National Laboratory (↗
DOE OSTI2026

Integrating Cybersecurity Risk Assessment with Process Safety in Chemical Process Industries

This dissertation bridges the gap between industrial cybersecurity and traditional process safety by introducing an integrated Cyber-LOPA framework that combines the Purdue Enterprise Reference Architecture, Cyber Kill Chain, and CVSS v4.0 metrics. Demonstrated on a High-Density Polyethylene slurry process, the work illustrates how cyber threats targeting automation systems can bypass physical protection layers, proving the necessity of unified risk assessments to prevent cyber-induced physical incidents in chemical manufacturing plants.

Cyber-LOPA (CLOPA)↗
DOE OSTI2026

A Physics-Informed Reinforcement Learning Framework for Economic-Thermal Co-Optimization of Crypto Mining Data Centers: Preprint

The rapid expansion of cryptocurrency mining has created a new class of high-density data centers characterized by extreme thermal flux and high sensitivity to volatile economic markets. Traditional thermal management strategies, typically reliant on rule-based control, maintain static setpoints that fail to account for fluctuating electricity prices and cryptocurrency values - factors critical to mining profitability. To address this, we present a physics-informed reinforcement learning (PIRL) framework for economic-thermal co-optimization in crypto mining data centers. This framework consists of a proximal policy optimization (PPO) agent, a virtual testbed powered by high-fidelity physics-based models, and an interactive frontend dashboard. The PPO agent is trained using the virtual testbed and strict hardware safety limits. This physics-informed approach allows the agent to learn a stochastic policy that dynamically balances mining revenue against operational costs by co-optimizing HVAC cooling setpoints and IT computational hashrate. The simulation results demonstrate that the integrated framework achieved an 8.62% increase in net operational profit compared to traditional baseline strategies while strictly adhering to safety-critical temperature constraints (coolant supply temperature < 32 degrees C). This work provides a scalable template for the deployment of reinforcement learning in mission critical facilities where economic volatility and physical safety must be managed simultaneously.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗