Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “heating capacity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Heat Capacity Mapping Mission

The Tasman Front was delineated by airborne expendable bathythermograph survey; and an Heat Capacity Mapping Mission (HCMM) IR image on the same day shows the same principal features as determined from ground-truth. It is clear that digital enhancement of HCMM images is necessary to map ocean surface temperatures and when done, the Tasman Front and other oceanographic features can be mapped by this method, even through considerable scattered cloud cover.

Nilsson, C. S.↗

Cooling and Heating Season Impacts of Right-Sizing of Fixed- and Variable-Capacity Heat Pumps With Attic and Indoor Ductwork

A new generation of full variable-capacity air-conditioning (A/C) and heat pump units has come on the market that promises to deliver very high cooling and heating efficiency. The units are controlled differently than standard single-capacity (fixed-capacity) systems. Instead of cycling on at full capacity and cycling off when the thermostat is satisfied, the new units can vary their capacity over a wide range (approximately 40%–118% of nominal full capacity) and stay on for 60%–100% more hours per day than the fixed-capacity systems depending on load-to-capacity ratios. Two-stage systems were not evaluated in this research effort.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Integration of a thermoelectric subcooler with an air‑source heat pump to enhance heating capacity and dehumidification

This study presents an innovative configuration of a thermoelectric subcooler (TES) integrated with an air-source heat pump (ASHP). The TES is installed in the liquid line, where it absorbs heat from the refrigerant. On its hot side, it discharges heat to the return air in heating mode or to the supply air in cooling mode, enabling year-round operation. The ASHP–TES system was evaluated under various conditions to reduce supplemental heating needs and improve dehumidification. Experimental heating tests revealed that activating the TES increased the heating capacity by 12%–20%. However, this occurred with a 7.6%–10% reduction in heating coefficient of performance (COP). In cooling mode, TES operation significantly improved moisture removal. The TES reduced the sensible heat ratio (SHR) and enhanced dehumidification, removing 20%–50% more moisture than a conventional system when meeting the same sensible load. The TES can be turned off to use the refrigerant subcooler for reheat supply air or turned on to substantially boost dehumidification. When meeting the same latent load, the ASHP–TES system achieved up to 33% energy savings compared with a conventional ASHP using resistance heating. Relative to a conventional ASHP paired with a whole-house dehumidifier, the ASHP–TES system provided up to 20% energy savings. These findings underscore the potential of TES integration to improve latent load control and enhance overall energy efficiency in hybrid ASHP systems, especially in cold and humid climates.

Hu, Yifeng [ORNL] (ORCID:0000000242875185)↗

Heat capacity mapping radiometer for AEM spacecraft

The operation, maintenance, and integration of the applications explorer mission heat capacity mapping radiometer is illustrated in block diagrams and detail schematics of circuit functions. Data format and logic timing diagrams are included along with radiometric and electronic calibration data. Mechanical and electrical configuration is presented to provide interface details for integration of the HCMR instrument to AEM spacecraft.

Sonnek, G. E.↗

Looking for footprint of bulk metallic glass in electronic and phonon heat capacities of Cu{sub 55}Hf{sub 45−x}Ti{sub x} alloys

We report on the heat capacity investigation of Cu{sub 55}Hf{sub 45−x}Ti{sub x} metallic glasses. The most appropriate procedure to estimate low temperature electronic and phonon contributions has been determined. Both contributions exhibit monotonous Ti concentration dependence, demonstrating that there is no relation of either the electron density of states at the Fermi level or the Debye temperature to the increased glass forming ability in the Ti concentration range x = 15–30. The thermodynamic parameters (e.g., reduced glass temperature) remain better indicators in assessing the best composition for bulk metallic glass formation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Heat Capacity of Erbium-Doped Gallium-Gadolinium Garnet

In this paper, we compared the results of a heat capacity study of an erbium-doped gallium gadolinium garnet crystal with data for an undoped garnet. The measurements were carried out in the temperature range from 1.9 to 220 K and in magnetic fields from 0 to 9 T. The temperature dependences of the specific heat were interpreted with allowance for the Schottky contributions due to the Gd{sup 3+} and Er{sup 3+} ions and the contributions of the thermal vibrations of the crystal lattice. The values of entropy and magnetic entropy are calculated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Soil moisture applications of the heat capacity mapping mission

Results are presented of ground, aircraft and satellite investigations conducted to evaluate the potential of the Heat Capacity Mapping Mission (HCMM) to monitor soil moisture and the depth of shallow ground water. The investigations were carried out over eastern South Dakota to evaluate the relation between directly measured soil temperatures and water content at various stages of canopy development, aircraft thermal scanner measurements of apparent canopy temperature and the reliability of actual HCMM data. The results demonstrate the possibility of evaluating soil moisture on the basis of HCMM apparent canopy temperature and day-night soil temperature difference measurements. Limitations on the use of thermal data posed by environmental factors which influence energy balance interactions, including phase transformations, wind patterns, topographic variations and atmospheric constituents are pointed out.

Heilman, J. L.↗

The high-temperature heat capacity of the (Th,U)O 2 and (U,Pu)O 2 solid solutions

The enthalpy increment data for the (Th,U)O 2 and (U,Pu)O 2 solid solutions are reviewed and complemented with new experimental data (400–1773 K) and many-body potential model simulations. The results of the review show that from room temperature up to about 2000 K the enthalpy data are in agreement with the additivity rule (Neumann-Kopp) in the whole composition range. Above 2000 K the effect of Oxygen Frenkel Pair (OFP) formation leads to an excess enthalpy (heat capacity) that is modeled using the enthalpy and entropy of OFP formation from the end-members. Here, a good agreement with existing experimental work is observed, and a reasonable agreement with the results of the many-body potential model, which indicate the presence of the diffuse Bredig (superionic) transition that is not found in the experimental enthalpy increment data.

36 MATERIALS SCIENCE↗

Snow hydrology studies using data from the Heat Capacity Mapping Mission

This paper describes a study of the snow hydrology application of thermal infrared (IR) data from the Heat Capacity Mapping Mission (HCMM) satellite. The HCMM data in both imagery and digital tape formats are analyzed for two study areas: the Salt-Verde Watershed in central Arizona and the southern Sierra Nevada in California. The analysis procedures are described, including the development of a unique contour plotting program that makes it possible to overlay HCMM thermal contours directly onto the visible channel imagery. The results indicate that satellite thermal-IR data can provide the hydrologist with additional useful information on snow cover.

Barnes, J. C.↗

Development of a BISON validation case for the TRISO transient irradiations in NSRR using effective heat capacity methods

The current tristructural isotropic (TRISO) fuel assessment and validation database in BISON primarily covers steady- state irradiation and high-temperature furnace testing. Transient assessment cases are potentially needed to support U.S. industry efforts in designing and deploying commercial reactors using TRISO fuels. Historical transient tests in- volving TRISO fuels used highly conservative conditions compared to the typical high-temperature gas-cooled reactor accident scenarios. Despite this, modeling historical transient tests is fundamental for evaluating BISON’s predictive capabilities, adapting material properties for high-temperature and high-particle-power regimes, and developing a sys- tematic validation approach for TRISO transient applications. This work developed a 1D model of transient experiments carried out at the Nuclear Safety Research Reactor using BISON. BISON’s predictions of energy deposition, UO 2 melting onset, and molten volume fractions are compared against experimental measurements. Melting was modeled using an effective specific heat capacity model for UO 2 . We found that BISON’s predictions are in reasonable agreement with experimental data for low-energy-deposition cases, and that BISON overpredicts melting at higher energy depositions. We also discuss the potential causes of discrepancies between the simulated and measured results and propose ways to further develop the model. Although these simulations used conservative conditions compared to those expected for actual TRISO-fueled reactors, they extended the range of conditions reflected in the data in the existing BISON database for TRISO fuels.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evaluating Moisture Control of Variable-Capacity Heat Pumps in Mechanically Ventilated, Low-Load Homes in Climate Zone 2A

Low-load homes can present a challenge when selecting appropriate space-conditioning equipment. Conventional, fixed-capacity heating and cooling equipment is often oversized for small homes, causing increased first costs and operating costs. This report evaluates the performance of variable-capacity comfort systems, with a focus on inverter-driven, variable-capacity systems, as well as proposed system enhancements.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Ground water applications of the heat capacity mapping mission

The paper discusses the ground water portion of a hydrologic investigation of eastern South Dakota using data from the Heat Capacity Mapping Mission (HCMM) satellite. The satellite carries a two-channel radiometer (0.5-1.1 and 10.5-12.5 microns) in a sun synchronous orbit and collects data at approximately 0230 and 1330 local standard time with repeat coverage of 5 to 16 days depending on latitude. It is shown that HCMM data acquired at appropriate periods of the diurnal and annual temperature cycle can provide useful information on shallow ground water.

Heilman, J. L.↗

Heat Capacity Mapping Mission investigation no. 25 (Tellus project)

The TELLUS pilot project, utilizing 0.5 to 1.1 micron and 10.5 to 12.5 micron day and/or night imagery from the Heat Capacity Mapping Mission, is described. The application of remotely sensed data to synoptic evaluation of evapotranspiration and moisture in agricultural soils was considered. The influence of topography, soils, land use, and meteorology on surface temperature distribution was evaluated. Anthropogenic heat release was investigated. Test areas extended from semi-arid land in southern Italy to polders in the Netherlands, and from vine-growing hills in the Rhineland to grasslands in Buckinghamshire.

Deparatesi, S. G.↗

Evaluating Moisture Control of Variable-Capacity Heat Pumps in Mechanically Ventilated, Low-Load Homes in Climate Zone 2A

The well-sealed, highly insulated building enclosures constructed by today's home building industry coupled with efficient lighting and appliances are achieving significantly reduced heating and cooling loads. These low-load homes can present a challenge when selecting appropriate space-conditioning equipment. Conventional, fixed-capacity heating and cooling equipment is often oversized for small homes, causing increased first costs and operating costs. Even if fixed-capacity equipment can be properly specified for peak loads, it remains oversized for use during much of the year. During these part-load cooling hours, oversized equipment meets the target dry-bulb temperatures very quickly, often without sufficient opportunity for moisture control. The problem becomes more acute for high-performance houses in humid climates when meeting ASHRAE Standard 62.2 recommendations for wholehouse mechanical ventilation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

On heat capacity of nanoclusters with a shell structure

Pair correlation effects in nanoclusters with a shell structure are analyzed by the exact diagonalization method. The singularity in the behavior of the heat capacity of such clusters is analyzed using the many-particle spectrum of nanoclusters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Boron coordination change in barium borate melts and glasses and its contribution to configurational heat capacity, entropy, and fragility

High-energy x-ray diffraction from molten and glassy BaB 2 O 4 and BaB 4 O 7 has been performed using aerodynamic levitation and laser heating over a wide range of temperatures. Remarkably, even in the presence of a heavy metal modifier dominating x-ray scattering, it was possible to extract accurate values for the tetrahedral, sp 3 , boron fraction, N 4 , which declines with increasing temperature, using bond valence-based mapping from the measured mean B–O bond lengths while accounting for vibrational thermal expansion. These are used within a boron-coordination-change model to extract enthalpies, ΔH, and entropies, ΔS, of isomerization between sp 2 and sp 3 boron. The results for BaB 4 O 7 , ΔH = 22(3) kJ mol -1 boron, ΔS = 19(2) J mol -1 boron K -1 , agree quantitatively with those found previously for Na 2 B 4 O 7 . Analytical expressions for N 4 (J, T) and associated configurational heat capacity, $C_{P}^{conf}$(J, T), and entropy, S conf (J, T), contributions are extended to cover a wide composition range 0 ≤ J = BaO/B 2 O 3 ≤ 3 using a model for ΔH(J) and ΔS(J) derived empirically for lithium borates. Maxima in the $C_{P}^{conf}$(J, T g ) and fragility index contributions are thereby predicted for J ≲ 1, higher than the maximum observed and predicted in N 4 (J, T g ) at J ≃ 0.6. We discuss the utility of the boron-coordination-change isomerization model in the context of borate liquids containing other modifiers and the prospect of neutron diffraction to aid in empirical determinations of modifier-dependent effects, illustrated by new neutron diffraction data on Ba 11 B 4 O 7 glass, its well-known α-polymorph, and lesser-known δ-phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The electronic heat capacity of YBa{sub 2}Cu{sub 3}O{sub 7−δ} superconductor

The contributions due to the point defects or disorder and anharmonicities which play deterministic role in the understanding of electronic heat capacity (EHC) of high temperature superconductors (HTS) have been investigated via electron density of states (EDOS) approach on the basis of quantum dynamical many body theory. The evaluation of EDOS has been carried out with the help of most versatile method of double time temperature dependent electron Green’s functions (GF) via a Hamiltonian (non BCS type) which includes the effects of electrons, phonons, defects, anharmonicity, and electron-phonon interactions which enables to account the effects of cubic anharmonicity besides with both the force constant changes and mass difference caused by the impurities in developing the results for EDOS and EHC. The new results reveal some striking features of EHC of HTS.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗