Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “grid strength”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

An Empirical Model for Vane-Type Vortex Generators in a Navier-Stokes Code

An empirical model which simulates the effects of vane-type vortex generators in ducts was incorporated into the Wind-US Navier-Stokes computational fluid dynamics code. The model enables the effects of the vortex generators to be simulated without defining the details of the geometry within the grid, and makes it practical for researchers to evaluate multiple combinations of vortex generator arrangements. The model determines the strength of each vortex based on the generator geometry and the local flow conditions. Validation results are presented for flow in a straight pipe with a counter-rotating vortex generator arrangement, and the results are compared with experimental data and computational simulations using a gridded vane generator. Results are also presented for vortex generator arrays in two S-duct diffusers, along with accompanying experimental data. The effects of grid resolution and turbulence model are also examined.

Dudek, Julianne C.↗

Numerical simulations of quiet sun magnetism: On the contribution from a small-scale dynamo

We present a series of radiative MHD simulations addressing the origin and distribution of the mixed polarity magnetic field in the solar photosphere. To this end, we consider numerical simulations that cover the uppermost 2-6 Mm of the solar convection zone and we explore scales ranging from 2 km to 25 Mm. We study how the strength and distribution of the magnetic field in the photosphere and subsurface layers depend on resolution, domain size, and boundary conditions. We find that 50% of the magnetic energy at the τ = 1 level comes from fields with the less than 500 G strength and that 50% of the energy resides on scales smaller than about 100 km. While the probability distribution functions are essentially independent of resolution, properly describing the spectral energy distribution requires grid spacings of 8 km or smaller. The formation of flux concentrations in the photosphere exceeding 1 kG requires a mean vertical field strength greater than 30-40 G at τ = 1. The filling factor of kG flux concentrations increases with overall domain size as the magnetic field becomes organized by larger, longer-lived flow structures. A solution with a mean vertical field strength of around 85 G at τ = 1 requires a subsurface rms field strength increasing with depth at the same rate as the equipartition field strength. We consider this an upper limit for the quiet Sun field strength, which implies that most of the convection zone is magnetized close to the equipartition. We discuss these findings in view of recent high-resolution spectropolarimetric observations of quiet Sun magnetism.

79 ASTRONOMY AND ASTROPHYSICS↗

Mechanical Design of Carbon Ion Optics

Carbon Ion Optics are expected to provide much longer thruster life due to their resistance to sputter erosion. There are a number of different forms of carbon that have been used for fabricating ion thruster optics. The mechanical behavior of carbon is much different than that of most metals, and poses unique design challenges. In order to minimize mission risk, the behavior of carbon must be well understood, and components designed within material limitations. Thermal expansion of the thruster structure must be compatible with thermal expansion of the carbon ion optics. Specially designed interfaces may be needed so that grid gap and aperture alignment are not adversely affected by dissimilar material properties within the thruster. The assembled thruster must be robust and tolerant of launch vibration. The following paper lists some of the characteristics of various carbon materials. Several past ion optics designs are discussed, identifying strengths and weaknesses. Electrostatics and material science are not emphasized so much as the mechanical behavior and integration of grid electrodes into an ion thruster.

Haag, Thomas↗

Effect of Laser Processing on Strength and Portevin–Le Chatelier Serrated Deformation of Aluminum Alloy

The effect of surface processing by laser IR radiation on strength and Portevin–Le Chatelier serrated deformation of AlMg6 aluminum–magnesium alloy is experimentally studied. Laser processing consists in local “shots” on the surface at the nodes of a square grid in the gauge part of a flat sample. The conditions under which such laser processing causes an increase in the surface microhardness, ultimate tensile strength, and the critical strain of the first stress drop in the stress–strain curve; decreases the probability of deformation band formation; suppresses necking at the prefracture stage; and changes the main crack morphology. The possible mechanism of the effect of laser processing on band formation, serrated deformation, and alloy strength are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

How Accurate Are the Minnesota Density Functionals for Noncovalent Interactions, Isomerization Energies, Thermochemistry, and Barrier Heights Involving Molecules Composed of Main-Group Elements?

The 14 Minnesota density functionals published between the years 2005 and early 2016 are benchmarked on a comprehensive database of 4986 data points (84 data sets) involving molecules composed of main-group elements. The database includes noncovalent interactions, isomerization energies, thermochemistry, and barrier heights, as well as equilibrium bond lengths and equilibrium binding energies of noncovalent dimers. Additionally, the sensitivity of the Minnesota density functionals to the choice of basis set and integration grid is explored for both noncovalent interactions and thermochemistry. By and large, the main strength of the hybrid Minnesota density functionals is that the best ones provide very good performance for thermochemistry (e.g., M06-2X), barrier heights (e.g., M08-HX, M08-SO, MN15), and systems heavily characterized by self-interaction error (e.g., M06-2X, M08-HX, M08-SO, MN15), while the main weakness is that none of them are state-of-the-art for the full spectrum of noncovalent interactions and isomerization energies (although M06-2X is recommended from the 10 hybrid Minnesota functionals). Similarly, the main strength of the local Minnesota density functionals is that the best ones provide very good performance for thermochemistry (e.g., MN15-L), barrier heights (e.g., MN12-L), and systems heavily characterized by self-interaction error (e.g., MN12-L and MN15-L), while the main weakness is that none of them are state-of-the-art for the full spectrum of noncovalent interactions and isomerization energies (although M06-L is clearly the best from the four local Minnesota functionals). Finally, as an overall guide, M06-2X and MN15 are perhaps the most broadly useful hybrid Minnesota functionals, while M06-L and MN15-L are perhaps the most broadly useful local Minnesota functionals, although each has different strengths and weaknesses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A simple framework to characterize land aridity based on surface energy partitioning regimes

Land aridity is often characterized by the aridity index (AI), which does not account for land surface water-energy interactions that are crucially important in determining regional climate. Such interactions can be captured by the evaporative fraction (EF, ratio of evapotranspiration to available energy) regimes. As EF is subject to energy and water limitations in humid and dry areas, respectively, EF regimes may be used to characterize land aridity to account for the influence of complex land characteristics and their impact on water availability. Here, we propose a simple framework to characterize land aridity by statistically ranking the coupling strength between EF and surface energy and water terms. The framework is demonstrated using gridded data and compared with AI over the U.S. and China. Results show that regionalization of aridity zones based on EF regimes and a two-tiered classification scheme may provide information such as surface energy and water variability complementary to the background aridity depicted by AI, with implications for extreme events.

54 ENVIRONMENTAL SCIENCES↗

3D visualization of unsteady 2D airplane wake vortices

Air flowing around the wing tips of an airplane forms horizontal tornado-like vortices that can be dangerous to following aircraft. The dynamics of such vortices, including ground and atmospheric effects, can be predicted by numerical simulation, allowing the safety and capacity of airports to be improved. In this paper, we introduce three-dimensional techniques for visualizing time-dependent, two-dimensional wake vortex computations, and the hazard strength of such vortices near the ground. We describe a vortex core tracing algorithm and a local tiling method to visualize the vortex evolution. The tiling method converts time-dependent, two-dimensional vortex cores into three-dimensional vortex tubes. Finally, a novel approach calculates the induced rolling moment on the following airplane at each grid point within a region near the vortex tubes and thus allows three-dimensional visualization of the hazard strength of the vortices. We also suggest ways of combining multiple visualization methods to present more information simultaneously.

Ma, Kwan-Liu↗

Parameterizing Convective Organization Effects With a Moisture-PDF Approach in Climate Models: Concept and a Regional Case Simulation

We propose a parameterization scheme of convective organization effects based on a moisture-distribution approach, which can reflect aggregation of convective cells within a model grid as well as the interaction between convection and spatial heterogeneity in free-troposphere moisture. With this concept, convective cells in an aggregated state are surrounded by air that is moister than the grid-mean condition, which provides a “shielding” effect favorable for deeper convective updrafts. Such effects are represented quantitatively via utilizing a schematic diagram about the geometric interpretation of convective cluster, dry area, and their contact area, in which both the convective cluster size and dry area fraction increase during the development of convection. Our sensitivity analyses indicate that the new scheme performs well in capturing the mean precipitation features. Excluding the convective organization effects in the model leads to a considerable reduction in the simulated precipitation magnitude. Notably, there exists an inverse relationship between background mean moisture condition and sub-grid moisture variability for a given rain rate, suggesting that with a high spatial heterogeneity in free-troposphere moisture, convection can still develop and maintain its strength under relatively dry background conditions, consistent with the convection-permitting model simulation. Overall, our new parameterization of convective organization effects can successfully reproduce the relationship between precipitation and sub-grid moisture variability, which is a missing element in traditional convection parameterization schemes but important for the simulations of precipitation variability at various scales in climate models.

54 ENVIRONMENTAL SCIENCES↗

Indoor Wireless Localization of Uncooperative Sources Using a Ray Tracing Model

Indoor geolocation of radio frequency (RF) trans- mitters is challenging due to site-specific multipath effects, especially when the sources are uncooperative. A source being uncooperative means that a-priori the transmit time, location, and power are unknown. It is proposed to use a site-specific ray tracing model to generate realistic indoor RF responses, perform geolocation using multiple methods, and compare their performance. This work will look at two types of geolocation algorithms: (1) time-difference of arrival (TDOA) and (2) re- ceived signal strength Indicator (RSSI) fingerprinting or pattern- matching-based methods. An indoor space will be simulated with a grid of fixed receivers and a grid of transmit locations using Remcom’s Wireless InSite. Using the output of the Wireless InSite simulation the response from any given transmit location can be generated and used to evaluate geolocation performance.

indoor source localization, Wireless InSite, re- c↗

Simulating bubble dynamics in a buoyant system

Summary Multiphase flows are critical components of many physical systems; however, numerical models of multiphase flows with large parameter gradients can be challenging. Here, two different numerical methods, volume of fluid (VOF) and smoothed particle hydrodynamics (SPH), are used to model the buoyant rise of isolated gas bubbles through quiescent fluids for a range of Bond and Reynolds numbers. The VOF is an Eulerian grid–based method, whereas the SPH is Lagrangian and mesh free. Each method has unique strengths and weaknesses, and a comparison of the two approaches as applied to multiphase phenomena has not previously been performed. The VOF and SPH simulations are compared, verified, and validated. Results using two‐dimensional VOF and SPH simulations are similar to each other and are able to reproduce numerical benchmarks and experimental results for sufficiently large Morton and Reynolds numbers. It is also shown that at low Reynolds numbers, the two methods, SPH and VOF, diverge in the transient regime of the bubble rise. Regimes that require simulations capable of representing three‐dimensional drag are identified as well as regimes in which results from VOF and SPH diverge.

Arai, Erin↗

Performance limits of ion extraction systems with non-circular apertures

A three-dimensional computer simulation is used to determine the perveance limitations of ion extraction systems with non-circular apertures. The objective of the study is to analyze the possibilities to improve mechanical strength of the ion optics made of carbon-carbon composite materials. Non-circular grid apertures are better suited to the physical structure of carbon-carbon composite materials, than conventionally used circular holes in a hexagonal pattern, because they allow a fewer number of cut fibers. However, the slit-type accelerating systems, usually regarded as the main alternative to the conventional ion optics, have an intolerably narrow range of operating perveance values at which there is no direct ion impingement on the acceleration grid. This paper presents results of comparative analysis of a number of different ion optical systems with non-circular apertures and conventional ion optical systems with circular apertures. It has been revealed that a relatively wide perveance range without direct ion impingement may be obtained with apertures shaped as a square with rounded corners. Numerical simulations show that this geometry may have equivalent perveance range as the traditional geometry with circular apertures while being more mechanically robust. In addition, such important characteristics, as the effective transparency for both the ions and the neutral atoms, the height of the potential barrier reflecting the downstream plasma electrons and the angular divergence of the beamlet also can be very close to these parameters for the optics with circular apertures.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Development of Gridded Innovations and Observations Supplement to MERRA-2

Atmospheric reanalysis have become an important source of data for weather and climate research, owing to the continuity of the data, but especially because of the multitude of observational data included (radiosondes, commercial aircraft, retrieved data products and radiances). However, the presence of assimilated observations can vary based on numerous factors, and so it is difficult or impossible for a researcher to say with any degree of certainty how many and what type of observations contributed to the reanalysis data they are using at any give point in time or space. For example, quality control, transmission interruptions, and station outages can occasionally affect data availability. While orbital paths can be known, drift in certain instruments and the large number of available instruments makes it challenging to know which satellite is observing any region at any point in the diurnal cycle. Furthermore, there is information from the statistics generated by the data assimilation that can help understand the model and the quality of the reanalysis. Typically, the assimilated observations and their innovations are in observation-space data formats and have not been made easily available to reanalysis users.A test data set has been developed to make the MERRA-2 assimilated observations available for rapid and general use, by simplifying the data format. The observations are binned to a grid similar as MERRA-2 and saved as netCDF. This data collection includes the mean and number of observations in the bin as well as its variance. The data will also include the innovations from the data assimilation, the forecast departure and the analysis increment, as well as bias correction (for satellite radiances). We refer to this proof-of-concept data as the MERRA-2 Gridded Innovations and Observations (GIO). In this paper, we present the data format and its strengths and limitations with some initial testing and validation of the methodology.

SSMI↗

“It’s Raining Bits”: Patterns in Directional Precipitation Persistence Across the United States

The spatial and temporal ordering of precipitation occurrence impacts ecosystems, streamflow, and water availability. For example, both large-scale climate patterns and local landscapes drive weather events, and the typical speeds and directions of these events moving across a basin dictate the timing of flows at its outlet. We address the predictability of precipitation occurrence at a given location, based on the knowledge of past precipitation at surrounding locations. We identify ‘‘dominant directions of precipitation influence’’ across the continental United States based on a gridded daily dataset. Specifically, we apply information theory–based measures that characterize dominant directions and strengths of spatial and temporal precipitation dependencies. On a national average, this dominant direction agrees with the prevalent direction of weather movement from west to east across the country, but regional differences reflect topographic divides, precipitation gradients, and different climatic drivers of precipitation. Trends in these information relationships and their correlations with climate indices over the past 70 years also show seasonal and spatial divides. This study expands upon a framework of information-based predictability to answer questions about spatial connectivity in addition to temporal persistence. The methods presented here are generally useful to understand many aspects of weather and climate variability.

North America↗

Delayed Breakdown in Liquid Nitrogen for Sphere-Plane Geometry When Subjected to Lightning Impulse

Liquid nitrogen (LN) is often the primary insulating medium for high voltage, high temperature superconducting grid applications. A number of papers have been published on the AC and DC breakdown strengths but only a few have focused on lightning impulse. In general, when a 1.2x50 s (rise/fall) impulse is applied to a sphere-plane gap in liquid nitrogen the breakdown does not always or typically occur at the peak voltage, but rather at times following the peak, ranging from 0 (no delay) up to 120 s for the LN2 pressures and gaps studied. Data will be presented on the delay times for different gaps, sphere diameters and at two pressures, 1 bar and 1.33 bar. Most of the data was obtained for negative impulse (on the sphere) and one data set was obtained for positive impulse. Delays were observed to increase with increasing gap spacing. However, for a given set of conditions (i.e. within a given data set) the breakdown delays decreased as the peak voltage increased. It is believed that liquid nitrogen bubble initiation and growth may account for the delay in breakdown.

lightning impulse↗

Reaching Grid Parity Using BP Solar Crystalline Silicon Technology: A Systems Class Application

The primary target market for this program was the residential and commercial PV markets, drawing on BP Solar's premium product and service offerings, brand and marketing strength, and unique routes to market. These two markets were chosen because: (1) in 2005 they represented more than 50% of the overall US PV market; (2) they are the two markets that will likely meet grid parity first; and (3) they are the two market segments in which product development can lead to the added value necessary to generate market growth before reaching grid parity. Federal investment in this program resulted in substantial progress toward the DOE TPP target, providing significant advancements in the following areas: (1) Lower component costs particularly the modules and inverters. (2) Increased availability and lower cost of silicon feedstock. (3) Product specifically developed for residential and commercial applications. (4) Reducing the cost of installation through optimization of the products. (5) Increased value of electricity in mid-term to drive volume increases, via the green grid technology. (6) Large scale manufacture of PV products in the US, generating increased US employment in manufacturing and installation. To achieve these goals BP Solar assembled a team that included suppliers of critical materials, automated equipment developers/manufacturers, inverter and other BOS manufacturers, a utility company, and University research groups. The program addressed all aspects of the crystalline silicon PV business from raw materials (particularly silicon feedstock) through installation of the system on the customers site. By involving the material and equipment vendors, we ensured that supplies of silicon feedstock and other PV specific materials like encapsulation materials (EVA and cover glass) will be available in the quantities required to meet the DOE goals of 5 to 10 GW of installed US PV by 2015 and at the prices necessary for PV systems to reach grid parity in 2015. This final technical report highlights the accomplishments of the BP Solar technical team from 2006 to the end of the project in February 2010. All the main contributors and team members are recognized for this accomplishment and their endeavors are recorded in the twelve main tasks described here.

14 SOLAR ENERGY↗

A Large-Eddy Simulation Of Turbulent Flow Over A Backward Facing Step

Large-eddy simulation (LES) was used to study the turbulent flow over a backward facing step. The simulations examine the details of the turbulent flow’s separated and reattaching regions created by the step geometry. An explicit high-order of accuracy/high resolution finite-difference computational fluid dynamics solver was used for both LES and Reynolds-averaged Navier-Stokes (RANS) simulations. The experimental data from the backward facing step experiment of Driver and Seegmiller was used for comparison. Data presented are derived from a RANS simulation using the Spalart-Allmaras turbulence model and LES simulations using the implicit LES assumption on three different grids of varying resolution. The RANS solution agrees with past work. It does an adequate job of predicting the flowfield and reattachment point, but misses details such as the strength of the recirculating region and magnitudes of the Reynolds stresses. The synthetic eddy method was used to provide a turbulent inflow to the quasi-2D LES domains. For the LES, the coarse grid was of insufficient resolution and under-predicted the skin friction coefficient and over-predicted the normal stresses. The finer grid LES results accurately predict the skin friction coefficient and provide more accurate Reynolds stresses. Triple product velocity correlations are also computed from the LES and the finer grid results did a good job predicting the magnitudes of the curves and the shapes were reasonably represented. It is recommended that future work include investigating the turbulent inflow domain length, width of the quasi-2D domain, and additional grid refinement

turbulence↗

A Large-Eddy Simulation Of Turbulent Flow Over A Backward Facing Step

Large-eddy simulation (LES) was used to study the turbulent flow over a backward facing step. The simulations examine the details of the turbulent flow's separated and reattaching regions created by the step geometry. An explicit high-order of accuracy/high resolution finite-difference computational fluid dynamics solver was used for both LES and Reynolds-averaged Navier-Stokes (RANS) simulations. The experimental data from the backward facing step experiment of Driver and Seegmiller was used for comparison. Data presented are derived from a RANS simulation using the Spalart-Allmaras turbulence model and LES simulations using the implict LES assumption on three different grids of varying resolution. The RANS solution agrees with past work. It does an adequate job of predicting the flowfield and reattachment point, but misses details such as the strength of the recirculating region and magnitudes of the Reynolds stresses. The synthetic eddy method was used to provide a turbulent inflow to the quasi-2D LES domains. For the LES, the coarse grid was of insufficient resolution and under-predicted the skin friction coefficient and over-predicted the normal stresses. The finer grid LES results accurately predict the skin friction coefficient and provide more accurate Reynolds stresses. Triple product velocity correlations are also computed from the LES and the finer grid results did a good job predicting the magnitudes of the curves and the shapes were reasonably represented. It is recommended that future work include investigating the turbulent inflow domain length, width of the quasi-2D domain, and additional grid refinement.

turbulence↗

Inductively driven surface-plasma negative ion source for N-NBI use (invited)

The long-pulse surface-plasma source prototype is developed at Budker Institute of Nuclear Physics for negative-ion based neutral beam injector use. The essential source features are (1) an active temperature control of the ion-optical system electrodes by circulation of hot thermal fluid through the channels, drilled in the electrode bodies, (2) the concaved transverse magnetic field in the extraction and acceleration gaps, preventing the electrons trapping and avalanching, and (3) the directed cesium deposition via distribution tubes adjacent to the plasma grid periphery. The long term effect of cesium was obtained just with the single cesium deposition. The high voltage strength of ion-optical system electrodes was improved with actively heated electrodes. A stable H{sup −} beam with a current ∼1 A and energy 90 keV was routinely extracted and accelerated.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗