Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “graphite crystal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Revealing the electronic structure of LiC 6 by soft X-ray spectroscopy

The electronic structure of LiC 6 has been investigated in this paper by soft X-ray absorption and emission spectroscopies. The results reveal that upon full lithiation of graphite, the Li 2s electrons are transferred into the carbon π* states in a near rigid-band behavior, resulting in the increased density of states near E F and the shift of σ* states to lower energies. Finally, in addition, the resonant inelastic X-ray scattering spectra of LiC 6 do not show strong dispersive features as that of graphite, indicating that the crystal momentum is not conserved during the scattering process due to the delocalization of electrons in the intermediate state.

36 MATERIALS SCIENCE↗

Low-temperature growth of well-aligned ZnO nanorods/nanowires on flexible graphite sheet and their photoluminescence properties

Highlights: ► Well-aligned ZnO nanostructures were grown on flexible graphite sheets at 500–650 °C. ► ZnO nanostructures are formed via self-catalytic vapor–solid process assisted by immiscibility of ZnO with graphite. ► The ZnO nanostructures show intensive green emission. ► The photoluminescence property can be easily tuned by changing growth condition or annealing treatment. -- Abstract: We have grown large-scale well-aligned ZnO nanorods/nanowires on commercial flexible graphite sheet (FGS) at low temperature via chemical vapor deposition method. The products were characterized by X-ray diffraction, scanning electron microscopy, and high-resolution transmission electron microscopy. The effects of the growth temperature and oxygen flow rate on the morphology of ZnO nanostructures have been investigated. The growth mechanism of ZnO is found to be a self-catalytic vapor–solid process assisted by the immiscibility of ZnO with graphite. The as-grown ZnO/FGS products show strong green emission and their photoluminescence properties can be tuned by changing growth condition or annealing treatment.

36 MATERIALS SCIENCE↗

Investigation of the electrocatalytic oxygen reduction and evolution reactions in lithium–oxygen batteries

Oxygen reduction and oxygen evolution reactions were examined on graphite electrodes with different crystal orientations. The kinetics for the redox couple O 2 /O 2 •- are very fast, therefore no catalyst seems necessary to assist the charge transfer process. Apparently, the main source of the overpotential for the O 2 reduction reaction is from mass diffusion. Li 2 O 2 becomes soluble in non-aqueous electrolytes in the presence of the tetraethylammonium tetrafluoroborate additive. The soluble B-O 2 2- ions can be oxidized electro-catalytically. The edge orientation of graphite demonstrates superior catalytic activity for the oxidation over basal orientation. The findings reveal an opportunity for recharging Li-air batteries efficiently and a new strategy of developing the catalyst for oxygen evolution reaction.

25 ENERGY STORAGE↗

Enhancement mechanism of field electron emission properties in hybrid carbon nanotubes with tree- and wing-like features

In this work, the tree-like carbon nanotubes (CNTs) with branches of different diameters and the wing-like CNTs with graphitic-sheets of different densities were synthesized by using plasma enhanced chemical vapor deposition. The nanostructures of the as-prepared hybrid carbon materials were characterized by scanning electron microscopy and transmission electron microscopy. The structural dependence of field electron emission (FEE) property was also investigated. It is found that both of the tree- and wing-like CNTs exhibit a lower turn-on field and higher emission current density than the pristine CNTs, which can be ascribed to the effects of branch size, crystal orientation, and graphitic-sheet density. - Graphical abstract: Tree-like carbon nanotubes (CNTs) with branches and the wing-like CNTs with graphitic-sheets were synthesized by using plasma enhanced chemical vapor deposition. The structural dependence of field electron emission property was also investigated.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Radiological Shielding Design for the Neutron Backscattering Spectrometer EMU

In this paper we present modelling and design of compact radiation shielding required for operation of the EMU instrument, located at Australia's OPAL nuclear reactor. The acceptance criteria for the shielding design were (i) safety - dose rate ≤ 3 μSv/h at external surfaces of the instrument's experimental area, (ii) floor load limit < 20 tons/m{sup 2}, (iii) low cost and (iv) for maintenance purposes 'easy access' to components of the instruments. The EMU instrument is a cold neutron backscattering spectrometer designed to measure inelastic neutron scattering. Its distinctive feature is that it has a tight elastic energy transfer resolution, of about 1 μeV. The instrument provides unique opportunities to study diffusion in complex materials, e.g. water molecules in confinement, polymers or biological molecules, particularly in the Asia-Oceania region. EMU is the first instrument located on the CG3 neutron beam line of the OPAL Neutron Guide Hall (NGH). A pre-existing evacuated neutron guide of dimensions 200 mm (height) x 50 mm (width) feeds into the shared EMU/KOOKABURRA pre-monochromator bunker shielding assembly, and its bottom cross section will be intercepted ∼200 mm further in air by the highly orientated pyrolytic graphite (HOPG) EMU pre-monochromator (take-off angles from 125.4 deg. to 148 deg.). The bunker shielding assembly for EMU also contains a beryllium filter and Focusing Guide Section D (FGD, 170 mm (height) x 50 mm (width)). To accommodate the range of take-off angles Pb cylindrical shielding blocks of radius 140 mm and 500 mm height have been designed. These blocks will be located at the section of the bunker where the neutron beam will exit towards the experimental area and they will reside on top of a hollow steel base (sides 10 mm thick), on which they move by sliding and are integrated with the tertiary shutter. The experimental area is enclosed by a concrete wall of 2.5 m height and 300 mm thickness, shared with the KOOKABURRA instrument, Gyprock Plasterboard panels with viewing windows, a wall from the Out-of-Pile Bunker and the CG3 shielding. The neutron beam enters the experimental area via the tertiary shutter, into the Focusing Guide Section C (FGC), which has an entrance guide cross-section of 158 mm (height) x 79 mm (width) and exit guide cross-section of 149 mm (height) x 85 mm (width) and is of length 816 mm. The vacuum chamber of FGC will be connected to the vacuum chamber of the Background Chopper (BC, disc of outer radius 350 mm). Focusing Guide Section B (FGB) is aligned with FGC and its vacuum shared with the BC vacuum. The FGB has an exit guide cross section of 50 mm (height) x 49 mm (width) and is of length 4046 mm, which will focus the neutron beam vertically and horizontally towards the Al window entrance (0.82 mm thickness, labelled N16) of the Scattering Tank assembly (constructed from 20 mm - 40 mm thickness stainless steel and will be under vacuum < 1 x 10{sup -3} mbar). Inside the Scattering Tank there is another section of Focusing Guide (FGA), with an exit guide cross-section of 30 mm (height) 30 mm (width) and of length 417 mm. The neutron beam exiting the FGA will be reflected by the HOPG crystal pieces of the Graphite Chopper (GC) towards the Backscattering Monochromator (BM). The reflected neutron beam will first pass through the other Al window (0.82 mm thickness, labelled N17) of the Scattering Tank and then enter into a flight tube (steel of 10 mm thickness). The BM is formed in an 1800 mm spherical radius array of Si crystal elements (0.87 mm thickness) and is oscillated by the linear motor Doppler Drive. The neutron beam will be reflected back at 180 deg. from, and focussed by the BM to reenter the Scattering Tank through the N17 Al window. It will then pass through the GC (HOPG crystals are rotated out of the way) and will reach the scattering sample of interest to the instrument end user. Also, inside the Scattering Tank there will be {sup 3}He linear position-sensitive detectors, and Analyser Arrays formed in an 1800 mm radius spherical arrays of Si crystal elements (0.87 mm thickness) glued on aluminium support frames (10 mm thickness) and span ∼160 deg. arc.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Introducing thermally stable inter-tube defects to assist off-axial phonon transport in carbon nanotube films

Through integrated molecular dynamics (MD) simulations and experimental studies, we demonstrated the feasibility of an ion-irradiation-and-annealing based phonon engineering technique to enhance thermal conductivity of carbon nanotube (CNT) films. Upon ion irradiation of CNT films, both inter-tube defects and intra-tube defects are introduced. Our MD simulations show that inter-tube defects created between neighboring tubes are much more stable than intra-tube defects created on tube graphitic planes. Upon thermal annealing, intra-tube defects are preferentially removed but inter-tube defects stay. Consequently, axial phonon transport increases due to reduced phonon scattering and off-axial phonon transport is sustained due to the high stability of inter-tube defects, leading to a conductivity enhancement upon annealing. The modeling predictions agree with experimental observations that thermal conductivities of CNT films were enhanced after 2 MeV hydrogen ion irradiations and conductivities were further enhanced upon post irradiation annealing.

36 MATERIALS SCIENCE↗

Structural and nanomechanical properties of nanocrystalline carbon thin films for photodetection

This paper reports the effect of helium gas pressure upon the structural, nanomechanical, and photoconductive properties of nanocrystalline carbon thin (NCT) films deposited by the filtered cathodic jet carbon arc technique. High-resolution transmission electron microscopy images confirm the nanocrystalline nature of the deposited films with different crystallite sizes (3–7 nm). The chemical structure of the deposited films is further analyzed by x-ray photoelectron spectroscopy and Raman spectroscopy, which suggest that the deposited films change from graphitelike to diamondlike, increasing in sp{sup 3} content, with a minor change in the dilution of the inert gas (helium). The graphitic character is regained upon higher dilution of the helium gas, whereupon the films exhibit an increase in sp{sup 2} content. The nanomechanical measurements show that the film deposited at a helium partial pressure of 2.2 × 10{sup −4} has the highest value of hardness (37.39 GPa) and elastic modulus (320.50 GPa). At a light intensity of 100 mW/cm{sup 2}, the NCT films deposited at 2.2 × 10{sup −4} and 0.1 mbar partial pressures of helium gas exhibit good photoresponses of 2.2% and 3.6%, respectively.

36 MATERIALS SCIENCE↗

Magnetic property enhancement and characterization of nano-structured barium ferrite by mechano-thermal treatment

In this research a mixture of barium ferrite and graphite powders was milled in a planetary ball mill and then heat treated in vacuum to produce BaFe{sub 12}O{sub 19}/Fe{sub 3}O{sub 4} and Fe/Fe{sub 3}O{sub 4} magnetic nano-composites. The effects of milling time and heat treatment temperature on the characteristics of powder mixture were investigated by X-ray diffraction analysis, vibrating sample magnetometer, transmission electron microscopy and Moessbauer spectroscopy. Phase analysis results showed that Fe{sub 2}O{sub 3} in barium ferrite partially reduced to Fe{sub 3}O{sub 4} during milling; hence, the reduced phase and remaining barium ferrite formed a nano-composite of BaFe{sub 12}O{sub 19}/Fe{sub 3}O{sub 4} after 20 h of milling. Heat treatment of the 40 h milled samples at 750-900 Degree-Sign C resulted in formation of Fe containing nano-composite. Magnetic measurements indicated that the coercivity of 267.92 Oe for 40 h milled sample decreased to 22.57 Oe by heat treatment at 900 Degree-Sign C, while its saturation magnetization increased from 31.56 to 169.43 emu/g due to the formation of Fe nano-crystallites. - Highlights: Black-Right-Pointing-Pointer Barium hexaferrite and graphite were treated mechano-thermally. Black-Right-Pointing-Pointer After 20 h milling, a nano-composite of BaFe{sub 12}O{sub 19}/Fe{sub 3}O{sub 4} formed. Black-Right-Pointing-Pointer Heat treatment of milled sample resulted in formation of Fe/Fe{sub 3}O{sub 4} composite. Black-Right-Pointing-Pointer Increasing heat treatment temperature results in higher saturation magnetization. Black-Right-Pointing-Pointer The milled and heat treated samples were nano-crystalline.

36 MATERIALS SCIENCE↗

CO{sub 2}-gasification reactivity of different carbonaceous materials at elevated temperatures

At the atmospheric pressure and at the temperatures between 1,223 and 1,673 K, the CO{sub 2} gasification reactivity of seven different carbonaceous materials comprising coal tar pitch coke, petroleum coke, natural graphite, carbon black and three coal chars was investigated by using thermogravimetric analysis. Their crystalline structures were analyzed by X-ray diffraction (XRD). It is found that the reactivity of the chars, pitch coke and petroleum coke produced from liquid phase carbonization, is several times poorer than that of the coal chars produced from solid phase carbonization and even lower than that of natural graphite. At the same time, it is obtained that under the condition of the chemical reaction control, the apparent activation energies of the former are in the range of 135.82-174.92 kJ/mol, while those of the latter are between 89.95 kJ/mol and 110.05 kJ/mol. Besides, the reactivity of the sample has a certain correlation with the crystalline structure of the sample, i.e., the larger the fraction of the relatively better crystalline structure is, the poorer the reactivity of the sample is.

01 COAL, LIGNITE, AND PEAT↗

Materials Data on C by Materials Project

C is rhombohedral graphite-like structured and crystallizes in the hexagonal P6_3/mmc space group. The structure is two-dimensional and consists of two C sheets oriented in the (0, 0, 1) direction. C is bonded in a trigonal planar geometry to three equivalent C atoms. All C–C bond lengths are 1.42 Å.

36 MATERIALS SCIENCE↗

Materials Data on C by Materials Project

C is rhombohedral graphite-like structured and crystallizes in the orthorhombic Fmmm space group. The structure is two-dimensional and consists of two C sheets oriented in the (0, 0, 1) direction. C is bonded in a trigonal planar geometry to three equivalent C atoms. All C–C bond lengths are 1.42 Å.

36 MATERIALS SCIENCE↗

Materials Data on C by Materials Project

C is Graphite-like structured and crystallizes in the orthorhombic Cmme space group. The structure is two-dimensional and consists of two C sheets oriented in the (0, 0, 1) direction. C is bonded in a trigonal planar geometry to three equivalent C atoms. All C–C bond lengths are 1.42 Å.

36 MATERIALS SCIENCE↗

Materials Data on C by Materials Project

C is rhombohedral graphite-like structured and crystallizes in the hexagonal P6/mmm space group. The structure is two-dimensional and consists of one C sheet oriented in the (0, 0, 1) direction. C is bonded in a trigonal planar geometry to three equivalent C atoms. All C–C bond lengths are 1.42 Å.

36 MATERIALS SCIENCE↗

Materials Data on C by Materials Project

C is Graphite-like structured and crystallizes in the monoclinic C2/m space group. The structure is two-dimensional and consists of one C sheet oriented in the (0, 0, 1) direction. C is bonded in a trigonal planar geometry to three equivalent C atoms. There is one shorter (1.42 Å) and two longer (1.43 Å) C–C bond length.

36 MATERIALS SCIENCE↗

Materials Data on CuH3NCl by Materials Project

CuNH3Cl is Graphite-like structured and crystallizes in the cubic I2_13 space group. The structure is zero-dimensional and consists of eight CuNH3Cl clusters. Cu1+ is bonded in a linear geometry to one N3- and one Cl1- atom. The Cu–N bond length is 1.91 Å. The Cu–Cl bond length is 2.12 Å. N3- is bonded in a distorted tetrahedral geometry to one Cu1+ and three equivalent H1+ atoms. All N–H bond lengths are 1.03 Å. H1+ is bonded in a single-bond geometry to one N3- atom. Cl1- is bonded in a single-bond geometry to one Cu1+ atom.

36 MATERIALS SCIENCE↗

Materials Data on C by Materials Project

C is rhombohedral graphite-like structured and crystallizes in the hexagonal P6/mmm space group. The structure is two-dimensional and consists of one C sheet oriented in the (0, 0, 1) direction. C is bonded in a trigonal planar geometry to three equivalent C atoms. All C–C bond lengths are 1.43 Å.

36 MATERIALS SCIENCE↗

Materials Data on SnGe by Materials Project

GeSn is graphite-derived structured and crystallizes in the trigonal P3m1 space group. The structure is two-dimensional and consists of one GeSn sheet oriented in the (0, 0, 1) direction. Sn is bonded in a trigonal non-coplanar geometry to three equivalent Ge atoms. All Sn–Ge bond lengths are 2.63 Å. Ge is bonded in a trigonal non-coplanar geometry to three equivalent Sn atoms.

36 MATERIALS SCIENCE↗

Materials Data on C by Materials Project

C is rhombohedral graphite-like structured and crystallizes in the hexagonal P6_3/mmc space group. The structure is two-dimensional and consists of two C sheets oriented in the (0, 0, 1) direction. C is bonded in a trigonal planar geometry to three equivalent C atoms. All C–C bond lengths are 1.42 Å.

36 MATERIALS SCIENCE↗