Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “graphite anodes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Influence of Calendering on the Electrochemical Performance of LiNi 0.9 Mn 0.05 Al 0.05 O 2 Cathodes in Lithium-Ion Cells

Electrode calendering is a necessary process used in industry to improve the volumetric capacity of lithium-ion batteries. However, calendering high-nickel cathodes leads to electrode particle pulverization, raising concerns of a reduced cycle life due to parasitic side reactions. We present here an investigation of the impact of calendering on the morphology and electrochemical performance of the cobalt-free layered oxide cathode LiNi 0.9 Mn 0.05 Al 0.05 O 2 (NMA-90). We find that secondary particle pulverization and fusion simultaneously occur at sufficiently high pressures. The initial surface area of the cathode is shown to increase with the degree of calendering, despite the higher likelihood of secondary particle fusion. Long-term cycling of full coin cells assembled with the NMA-90 cathode and the graphite anode indicates that cells with higher degrees of cathode calendering exhibit lower capacity fade compared to uncalendered cathodes. Hybrid pulse-power tests demonstrate that the usable capacity range of cells with calendered cathodes far exceeds those with uncalendered cells after long-term cycling. The improved capacity retention and pulse-power performance are attributed to the enhanced mechanical properties of the electrode after calendering that prevents loss of the primary particle contact during long-term cycling. As a result, we find that calendering high-nickel NMA-90 to industrially relevant densities does not have a detrimental effect on capacity fade, marking an important step toward commercial adoption.

25 ENERGY STORAGE↗
DOE OSTI2023

High-Performance Layered Ni-Rich Cathode Materials Enabled by Stress-Resistant Nanosheets

Here, layered O3-type transition metal oxides are promising cathode candidates for high-energy-density Li-ion batteries. However, the structural instability at the highly delithiated state and low kinetics at the fully lithiated state are arduous challenges to overcome. Here, a facile approach is developed to make secondary particles of Ni-rich materials with nanosheet primary grains. Because the alignment of the primary grains reduces internal stress buildup within the particle during charge-discharge and provides straightforward paths for Li transport, the as-synthesized Ni-rich materials do not undergo cracking upon cycling with higher overall Li + ion diffusion rates. Specifically, a LiNi 0.75 Co 0.14 Mn 0.11 O 2 cathode with nanosheet grains delivers a high reversible capacity of 206 mAh g -1 and shows ultrahigh cycling stability, e.g., 98% capacity retention over 500 cycles in a full cell with a graphite anode.

25 ENERGY STORAGE↗
DOE OSTI2023

Critical Contribution of Imbalanced Charge Loss to Performance Deterioration of Si-Based Lithium-Ion Cells during Calendar Aging

Increasing the energy density of lithium-ion batteries, and thereby reducing costs, is a major target for industry and academic research. One of the best opportunities is to replace the traditional graphite anode with a high-capacity anode material, such as silicon. However, Si-based lithium-ion batteries have been widely reported to suffer from a limited calendar life for automobile applications. Heretofore, there lacks a fundamental understanding of calendar aging for rationally developing mitigation strategies. Both open-circuit voltage and voltage-hold aging protocols were utilized to characterize the aging behavior of Si-based cells. Particularly, a high-precision leakage current measurement was applied to quantitatively measure the rate of parasitic reactions at the electrode/electrolyte interface. The rate of parasitic reactions at the Si anode was found 5 times and 15 times faster than those of LiNi 0.8 Mn 0.1 Co 0.1 O 2 and LiFePO 4 cathodes, respectively. Here, the imbalanced charge loss from parasitic reactions plays a critical role in exacerbating performance deterioration. In addition, a linear relationship between capacity loss and charge consumption from parasitic reactions provides fundamental support to assess calendar life through voltage-hold tests. These new findings imply that longer calendar life can be achieved by suppressing parasitic reactions at the Si anode to balance charge consumption during calendar aging.

25 ENERGY STORAGE↗
DOE OSTI2026

Integrative Additive Design for Robust SEI Formation in NMC811||Silicon Batteries

Silicon (Si) is considered a promising replacement for graphite anodes in lithium-ion batteries (LIBs) due to its high abundance and exceptional specific capacity, but its widespread commercialization has been hindered by poor electrochemical performance. Among various strategies, the use of functional additives has emerged as one of the most effective and cost-efficient methods to enhance the electrochemical properties of LIBs. In this study, several additives—vinylene carbonate (VC), vinyl ethylene carbonate (VEC), lithium difluorophosphate (LiDFP), lithium difluoro(oxalato)borate (LiDFOB), lithium tetrafluorooxalatophosphate (LiTFOP), and lithium difluorobis(oxalato)phosphate (LiDFBOP)—were systematically investigated in LiNi₀.₈Mn₀.₁Co₀.₁O₂ (NMC811)||Si full cells. Notably, LiDFBOP, a lithium salt containing two oxalate groups, outperformed all other additives, delivering the best capacity retention after 300 cycles. Comprehensive characterizations, including FTIR, SEM, and XPS, revealed that LiDFBOP's superior performance stems from its ability to form a more stable solid electrolyte interphase (SEI) on the Si anode, owing to its favorable molecular structure that integrates the beneficial features of the other additives.

25 ENERGY STORAGE↗
DOE OSTI2021

Electrolyte Regulating toward Stabilization of Cobalt-Free Ultrahigh-Nickel Layered Oxide Cathode in Lithium-Ion Batteries

Cobalt (Co)-free ultrahigh-nickel (Ni) layered oxides exhibit a double-edged competitive advantages in reducing the cathode cost and boosting the energy density, promising the sustainable development of batteries for electric vehicles. However, the increased Ni content, resultantly more highly oxidative Ni 4+ , potentially induces severe capacity fading due to the aggravated side reactions, limiting the practical applications. Here, we evaluate the compatibility of two localized high-concentration electrolytes (LHCEs) with LiNi 0.96 Mg 0.02 Ti 0.02 O 2 (NMT) cathode under a high charging voltage of 4.4 V in lithium ion batteries. The LHCE with EC additive enables the formation of stable interfacial layers on both NMT cathode and graphite anode, thus realizing a capacity retention of 97.2% over 200 cycles at 25 °C and high reversible capacities of ~180.2 and ~185.8 mAh g -1 , respectively, at 5C charge rate and 5C discharge rate. This study offers a promising approach to enable Co-free ultrahigh-Ni layered oxides for practical applications.

25 ENERGY STORAGE↗
DOE OSTI2024

Sustainable and Energy-Efficient Production of Rare-Earth Metals via Chloride-Based Molten Salt Electrolysis

Neodymium metal is a critical component of rare earth magnets, essential for electric vehicles and the green energy transition, but its production has severe environmental impacts across its mining, separation, purification, and metal electrowinning steps. Specifically, conventional neodymium electrowinning in oxyfluoride molten salts using a consumable graphite anode generates greenhouse gases, e.g., carbon dioxide and perfluorocarbon (PFC). We propose an alternative chloride-based molten salt electrolysis process utilizing a novel dimensionally stable anode (DSA). Our process lowers the specific electrical energy consumption compared to the state of the art, while producing reusable chlorine gas and eliminating direct CO 2 and PFC emissions. Chloride-based molten salt electrolysis of NdCl 3 (1.65 M) added to a LiCl–KCl eutectic (45:55 wt %), while using a RuO 2 -coated DSA enables high Coulombic efficiency (>80%), low specific energy consumption (2.3 kWh/kg-Nd), and excellent electrowon Nd product purity (>97 wt %). Life cycle analysis, excluding the common input feedstock (Nd 2 O 3 ), shows that the global warming potential for the proposed chloride-based electrolysis approach is 5 kg CO 2 equivalent, compared to 9–16 kg CO 2 equivalent for the conventional process, representing a 44–69% reduction in CO 2 emissions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Hollow-core optical fibre sensors for operando Raman spectroscopy investigation of Li-ion battery liquid electrolytes

Improved analytical tools are urgently required to identify degradation and failure mechanisms in Li-ion batteries. However, understanding and ultimately avoiding these detrimental mechanisms requires continuous tracking of complex electrochemical processes in different battery components. Here, we report an operando spectroscopy method that enables monitoring the chemistry of a carbonate-based liquid electrolyte during electrochemical cycling in Li-ion batteries with a graphite anode and a LiNi 0.8 Mn 0.1 Co 0.1 O 2 cathode. By embedding a hollow-core optical fibre probe inside a lab-scale pouch cell, we demonstrate the effective evolution of the liquid electrolyte species by background-free Raman spectroscopy. The analysis of the spectroscopy measurements reveals changes in the ratio of carbonate solvents and electrolyte additives as a function of the cell voltage and show the potential to track the lithium-ion solvation dynamics. The proposed operando methodology contributes to understanding better the current Li-ion battery limitations and paves the way for studies of the degradation mechanisms in different electrochemical energy storage systems.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Nonintrusive thermal-wave sensor for operando quantification of degradation in commercial batteries

Abstract Monitoring real-world battery degradation is crucial for the widespread application of batteries in different scenarios. However, acquiring quantitative degradation information in operating commercial cells is challenging due to the complex, embedded, and/or qualitative nature of most existing sensing techniques. This process is essentially limited by the type of signals used for detection. Here, we report the use of effective battery thermal conductivity ( k eff ) as a quantitative indicator of battery degradation by leveraging the strong dependence of k eff on battery-structure changes. A measurement scheme based on attachable thermal-wave sensors is developed for non-embedded detection and quantitative assessment. A proof-of-concept study of battery degradation during fast charging demonstrates that the amount of lithium plating and electrolyte consumption associated with the side reactions on the graphite anode and deposited lithium can be quantitatively distinguished using our method. Therefore, this work opens the door to the quantitative evaluation of battery degradation using simple non-embedded thermal-wave sensors.

25 ENERGY STORAGE↗
DOE OSTI2023

Topology-enhanced mechanical stability of swelling nanoporous electrodes

Abstract Materials like silicon and germanium offer a 10-fold improvement in charge capacity over conventional graphite anodes in lithium-ion batteries but experience a roughly threefold volume increase during lithiation, which challenges ensuring battery integrity. Nanoporous silicon, created by liquid-metal-dealloying, is a potentially attractive anode design to mitigate this challenge, exhibiting both higher capacity and extended cycle lifetimes. However, how nanoporous structures accommodate the large volume change is unknown. Here, we address this question by using phase-field modeling to produce nanoporous particles and to investigate their elastoplastic swelling behavior and fracture. Our simulations show that enhanced mechanical stability results from the network topology consisting of ligaments connected by bulbous, sphere-like nodes. The ligaments forcefully resist elongation while the nodes, behaving like isolated spherical particles, experience large stresses driving fracture. However, being smaller compared to a sphere of the same volume as the entire nanoporous particle, the nodes are more protected against fracture.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Electrolyte design for Li-ion batteries under extreme operating conditions

The ideal electrolyte for the widely used LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811)||graphite lithium-ion batteries is expected to have the capability of supporting higher voltages (≥4.5 volts), fast charging (≤15 minutes), charging/discharging over a wide temperature range (±60 degrees Celsius) without lithium plating, and non-flammability. No existing electrolyte simultaneously meets all these requirements and electrolyte design is hindered by the absence of an effective guiding principle that addresses the relationships between battery performance, solvation structure and solid-electrolyte-interphase chemistry. Here we report and validate an electrolyte design strategy based on a group of soft solvents that strikes a balance between weak Li+-solvent interactions, sufficient salt dissociation and desired electrochemistry to fulfil all the aforementioned requirements. Remarkably, the 4.5-volt NMC811||graphite coin cells with areal capacities of more than 2.5 milliampere hours per square centimetre retain 75 per cent (54 per cent) of their room-temperature capacity when these cells are charged and discharged at -50 degrees Celsius (-60 degrees Celsius) at a C rate of 0.1C, and the NMC811||graphite pouch cells with lean electrolyte (2.5 grams per ampere hour) achieve stable cycling with an average Coulombic efficiency of more than 99.9 per cent at -30 degrees Celsius. The comprehensive analysis further reveals an impedance matching between the NMC811 cathode and the graphite anode owing to the formation of similar lithium-fluoride-rich interphases, thus effectively avoiding lithium plating at low temperatures. Additionally, this electrolyte design principle can be extended to other alkali-metal-ion batteries operating under extreme conditions.

25 ENERGY STORAGE↗
DOE OSTI2020

A fluorine-substituted pyrrolidinium-based ionic liquid for high-voltage Li-ion batteries

A fluorine-substituted ionic liquid based on a pyrrolidinium cation and a bis(fluorosulfonyl)imide anion was synthesized using a facile one-step reaction. Here, the resulting ionic liquid is highly pure and when dissolved with LiFSI, the IL-based electrolyte showed good compatibility both in Li and graphite anodes, and superior voltage stability is demonstrated in a LiNi 0.5 Mn 0.3 Co 0.2 O 2 cell.

25 ENERGY STORAGE↗
DOE OSTI2026

Unraveling interphase-driven failure pathways in LiMn0.6Fe0.4PO4/graphite pouch cells

LiMnxFe1−xPO4 (LMFP) is a promising high-voltage, thermally stable, and earth-abundant cathode material, yet its practical application is limited by interphase instability and Mn dissolution. In this work, we systematically evaluate LiMn0.6Fe0.4PO4/graphite pouch cells using three electrolyte formulations including control carbonate electrolyte, control + 2 wt% vinylene carbonate (VC), and control + 2 wt% VC + 1 wt% 1,3,2-dioxathiolane 2,2-dioxide (DTD), to establish how electrolyte composition governs interphase chemistry and long-term degradation. Electrochemical testing shows that both additives are preferentially reduced prior to ethylene carbonate (EC) during cell formation, generating robust cathode-electrolyte interphase (CEI) and solid-electrolyte interphase (SEI) layers that suppress gas evolution and raise the first-cycle coulombic efficiency to 89.3%. Additionally, the dual-additive electrolyte delivers the most stable performance, retaining over 85% capacity after 600 cycles while minimizing impedance growth under long-term cycling at C/3 and 40 °C. Soft X-ray absorption spectroscopy confirms that VC + DTD effectively suppresses electrolyte oxidation at the cathode surface, and micro-X-ray fluorescence shows substantially reduced Mn dissolution and deposition on the graphite anode. Density functional theory simulations further provided insights into the structural and energetic influences of alkoxide species on the cathode surface, proposing a Mn2+ extraction mechanism. The combined experimental and computational findings establish a mechanistic link between electrolyte composition and interphase evolution, highlighting the effectiveness of electrolyte engineering for extending the operational lifetime of LMFP-based lithium-ion batteries.

Chak, Chanmonirath Michael↗
DOE OSTI2020

Investigating the Effects of Lithium Deposition on the Abuse Response of Lithium-Ion Batteries

Li deposition at the graphitic anode is widely reported in literature as one of the leading causes of capacity fade in lithium-ion batteries (LIBs). Previous literature has linked Li deposition resulting from low-temperature ageing to diminished safety characteristics, however no current research has probed the effects of Li deposition on the abuse response of well-characterized cells. Using overtemperature testing, a relationship between increased concentrations of Li deposition and exacerbated abuse response in 1 Ah pouch cells has been established. A novel Li deposition technique is also investigated, where cells with n:p < 1 (anode-limiting) have been cycled at a high rate to exploit Li + diffusion limitations at the anode. Scanning Electron Microscopy of harvested anodes indicates substantial Li deposition in low n:p cells after 20 cycles, with intricate networks of Li(s) deposits which hinder Li + intercalation/deintercalation. Peak broadening and decreased amplitude of differential capacity plots further validates a loss of lithium inventory to Li + dissolution, and Powder X-ray Diffraction indicates Li + intercalation with staging in anode interstitial sites as the extent of Li deposition increases. A cradle-to-grave approach is leveraged on cell fabrication and testing to eliminate uncertainty involving the effects of cell additives on Li deposition and other degradation mechanisms.

25 ENERGY STORAGE↗
DOE OSTI2021

Operando Measurements of Electrolyte Li-ion Concentration during fast charging with FTIR/ATR

The ability to charge a Li-ion battery at high charging rates is critical for electric vehicle adoption; however, further study of ion transport is required to develop electrolytes suitable for fast charge. Fourier transform infrared spectroscopy (FTIR) used with attenuated total reflection (ATR) enables operando measurements of liquid electrolytes. This research focused on solvation shifting of solvent infrared absorption bands in the presence of lithium ions. Lithium-shifted infrared absorption bands and non-shifted bands of ethyl methyl carbonate (EMC) and ethylene carbonate (EC) were compared to infer ion concentration changes during cycling. Lithium concentrations were calibrated using EC/EMC/LiPF 6 electrolytes with known lithium concentrations. A Li-ion half-cell with a graphite anode and EC/EMC/LiPF 6 electrolyte was observed with FTIR/ATR. The results showed that the magnitude of lithium concentration changes increased with increasing C-rate. During a galvanostatic intermittent titration technique (GITT) test, changes in lithium concentration could be observed. During intercalation, a lithium depletion occurred when a negative current was applied, and a lithium surplus occurred during deintercalation when a positive current was applied. The capability of observing lithium concentration has significant implications for the utility of operando studies and the potential to link lithium movement to battery performance.

25 ENERGY STORAGE↗
DOE OSTI2022

Conformal Pressure and Fast-Charging Li-Ion Batteries

Batteries capable of extreme fast-charging (XFC) are a necessity for the deployment of electric vehicles. Material properties of electrodes and electrolytes along with cell parameters such as stack pressure and temperature have coupled, synergistic, and sometimes deleterious effects on fast-charging performance. We develop a new experimental testbed that allows precise and conformal application of electrode stack pressure. We focus on cell capacity degradation using single-layer pouch cells with graphite anodes, LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC532) cathodes, and carbonate-based electrolyte. In the tested range (10–125 psi), cells cycled at higher pressure show higher capacity and less capacity fading. Additionally, Li plating decreases with increasing pressure as observed with scanning electron microscopy (SEM) and optical imaging. While the loss of Li inventory from Li plating is the largest contributor to capacity fade, electrochemical and SEM examination of the NMC cathodes after XFC experiments show increased secondary particle damage at lower pressure. We infer that the better performance at higher pressure is due to more homogeneous reactions of active materials across the electrode and less polarization through the electrode thickness. Our study emphasizes the importance of electrode stack pressure in XFC batteries and highlights its subtle role in cell conditions.

25 ENERGY STORAGE↗
DOE OSTI2023

Assessing Electrolyte Fluorination Impact on Calendar Aging of Blended Silicon-Graphite Lithium-Ion Cells Using Potentiostatic Holds

Silicon-based lithium-ion batteries have started to meet cycle life metrics, but they exhibit poor calendar life. Here, electrolyte fluorination impact on calendar fade of blended silicon-graphite anodes is explored using a LiPF 6 in EC:EMC:FEC electrolyte vs LiBOB in EC:EMC electrolyte. We utilize a combined experimental-modeling approach applying potentiostatic voltage holds (V-hold) to evaluate electrolyte suitability for calendar life in a shortened testing timeframe (~2 months). Our theoretical framework deconvolutes the irreversible parasitic capacity losses (lithium lost to the solid electrolyte interphase) from the V-hold electrochemical data. Unfluorinated electrolyte (dominant LiBOB reduction) exhibits higher cell resistance as compared to fluorinated electrolyte (dominant FEC reduction). Both systems have similar irreversible capacities during the voltage hold duration with slower rate of parasitic capacity loss for the LiBOB system. Extrapolation of the parasitic losses to end of life capacity fade of 20% shows LiBOB electrolyte outperforming LiPF 6 electrolyte in calendar life. The results demonstrate the applicability of the V-hold protocol as a rapid material screening tool providing semi-quantitative calendar lifetime estimates.

25 ENERGY STORAGE↗
DOE OSTI2024

Quantifying the Entropy and Enthalpy of Insertion Materials for Battery Applications Via the Multi-Species, Multi-Reaction Model

The entropy coefficient of a battery cell is the property that governs the amount of reversible heat that is generated during operation. In this work, we propose an extension of the Multi-Species, Multi-Reaction (MSMR) model to capture the entropy coefficient of a large format lithium-ion battery cell. We utilize the hybridized time-frequency domain analysis (HTFDA) method using a multi-functional calorimeter to probe the entropy coefficient of a large format pouch type lithium-ion battery with a NMC 811 cathode and a graphite anode. The measured entropy coefficient profile of the battery cell is deconvoluted into an entropy coefficient for each active material, which is then estimated using an extension of the MSMR model. Finally, we extend the entropy of a material to individual entropy for each gallery as treated by the model.

Electrochemistry↗