Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “global shape modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Line emission from H II blister models

Numerical techniques to calculate the thermal and geometric properties of line emission from H II 'blister' regions are presented. It is assumed that the density distributions of the H II regions are a function of two dimensions, with rotational symmetry specifying the shape in three-dimensions. The thermal and ionization equilibrium equations of the problem are solved by spherical modeling, and a spherical sector approximation is used to simplify the three-dimensional treatment of diffuse ionizing radiation. The global properties of H II 'blister' regions near the edges of a molecular cloud are simulated by means of the geometry/density distribution, and the results are compared with observational data. It is shown that there is a monotonic increase of peak surface brightness from the i = 0 deg (pole-on) observational position to the i = 90 deg (edge-on) position. The enhancement of the line peak intensity from the edge-on to the pole-on positions is found to depend on the density, stratification, ionization, and electron temperature weighting. It is found that as i increases, the position of peak line brightness of the lower excitation species is displaced to the high-density side of the high excitation species.

Rubin, R. H.↗
NASA NTRS1999

Recent Advances in Mars Tectonics

Since the publication of the "Stress and Tectonics on Mars" chapter in the Mars book (the last comprehensive summary of our knowledge on the topic) considerable advances have been made in certain areas of Martian tectonics and significant advances are expected with the return of Mars Global Surveyor data. This abstract will summarize the advances in our knowledge of tectonic features and processes on Mars since the Mars book and point towards new areas of research that can be expected from the Mars Global Surveyor data. Two out of three areas of study that were discussed as future directions of work in the Mars chapter have had significant work directed towards them. One area is the field of structural mapping and understanding the timing of tectonic activity on Mars in the framework of the global stratigraphy. Although the general development and relative timing of the development of the Tharsis province on Mars had been understood for some time, actual placement of mapped tectonic features in a global stratigraphic framework has only recently been completed. The second area of study mentioned in the Mars chapter was the impact of improved topography and gravity on modeling loads and deriving stresses in the Martian lithosphere. Mars Global Surveyor is on the brink of returning vastly improved topographic and gravity fields and these newer data sets can be used to better define the size and shape of Tharsis and to quantify loads and derived stresses in the Martian lithosphere. Additional information is contained in the original extended abstract.

Golombek, M. P.↗
NASA NTRS2023

Shape from spectra

We introduce a new unified atmospheric–topographic correction approach that estimates surface geometry directly from the radiance measurement. Surface topography influences the at-sensor radiance measurement, making precise topography modeling critical in applications like vegetation or snow studies in mountainous terrain. Currently, elevation maps are used to derive topographic variables such as the slope and sky-view factor. This process is error-prone since static global digital elevation models do not generally achieve the accuracy required, and even minor mismatches in spatial resolution can introduce significant artifacts in downstream processing. Here we demonstrate that it is possible to estimate topographic parameters directly from spectral data, ensuring perfect physical consistency, temporal coincidence, and spatial alignment. We present experiments estimating topographic slope in two scenes in Southern California, with data from NASA’s Next Generation Airborne Visible/Near Infrared Imaging Spectrometer (AVIRIS-NG). We compared our radiance-based estimates against high-resolution lidar datasets. Our initial validation result showed a correlation of R 2 = 0.864 (n = 160) over the homogeneous surface of Beckman Auditorium’s cone-shaped roof on the Caltech campus in Pasadena, California. We then validate the model over a larger study site near Santa Clarita, California, finding R 2 = 0.923 (n = 40,000) in a 350 x 350m area. The accuracy of our model estimates, combined with its systematic advantages over the alternative, show the potential of the approach for use in both airborne campaigns and orbital missions.

Nimrod Carmon↗
NASA NTRSDate not supplied

Fully Coupled Aeroelastic Stability Analysis of Adaptive Shape Memory Alloy Structural Technologies for Airframe Noise Reduction

The objective of this work is the development of computational models and analysis of the coupled fluid-structure response of a slat gap filler (SGF) noise treatment applied to the leading-edge-slat component of a high-lift system typical of modern transport aircraft. The representative airframe chosen for this work is NASA’s High-lift Common Research Model (CRM-HL) in a baseline high-lift configuration. Superelastic shape memory alloys (SMAs) have been identified as enabling materials for these structural treatments. Since the technology elements rely upon having a highly reconfigurable structure, designs must be assessed for static aeroelastic deflection as well as dynamic aeroelastic stability using coupled computational fluid dynamics (CFD) and nonlinear computational structural dynamics (NL CSD) tools. The technical approach consists of solving for the flow field around the entire vehicle using a global CFD model, followed by extraction of relevant local subdomain data for CFD and NL-CSD co-simulations. The SGF design is assessed using both 2D and 3D co-simulations to predict quasi-static aeroelastic deformations and to assess dynamic aeroelastic stability.

Fluid structure interaction↗
NASA NTRS1992

A piecewise continuous Timoshenko beam model for the dynamic analysis of tapered beam-like structures

Distributed parameter modeling offers a viable alternative to the finite element approach for modeling large flexible space structures. The introduction of the transfer matrix method into the continuum modeling process provides a very useful tool to facilitate the distributed parameter model applied to some more complex configurations. A uniform Timoshenko beam model for the estimation of the dynamic properties of beam-like structures has given comparable results. But many aeronautical and aerospace structures are comprised of non-uniform sections or sectional properties, such as aircraft wings and satellite antennas. This paper proposes a piecewise continuous Timoshenko beam model which is used for the dynamic analysis of tapered beam-like structures. A tapered beam is divided into several segments of uniform beam elements. Instead of arbitrarily assumed shape functions used in finite element analysis, the closed-form solution of the Timoshenko beam equation is used. Application of the transfer matrix method relates all the elements as a whole. By corresponding boundary conditions and compatible conditions a characteristic equation for the global tapered beam has been developed, from which natural frequencies can be derived. A computer simulation is shown in this paper, and compared with the results obtained from the finite element analysis. While piecewise continuous Timoshenko beam model decreases the number of elements significantly; comparable results to the finite element method are obtained.

Shen, Ji Yao↗
NASA NTRS2024

Development and Implementation of Large-Scale Numerical Models for Shape Memory Mars Spring Tires

The current work focuses on implementation of the user-defined shape memory alloy (SMA) model in the finite element analysis program ABAQUS for large-scale simulations of the Spring Tires made of SMA developed at the NASA Glenn Research Center. The main objective of this study was to improve and optimize the structural design of the SMA tires through in-depth numerical analysis and sensitivity studies. Various design variables (wire diam., coil diam., pitch, spring length, and bead angle) were varied to study their influence on the global load-displacement response of the tire construct. A detailed investigation of the three-dimensional stress states was also carried out to enhance understanding of the local changes as the tire goes through global deformation. It was concluded that a robust numerical model with a good predictive capability, together with a thoughtfully crafted sensitivity study, can result in reduced design iterations required to reach a desired tire performance. This will, in turn, lead to significantly reduced manufacturing time, required labor, and testing expense.

shape memory alloys↗
DOE OSTI2021

Uniqueness and global optimality of the maximum likelihood estimator for the generalized extreme value distribution

The three-parameter generalized extreme value distribution arises from classical univariate extreme value theory and is in common use for analysing the far tail of observed phenomena, yet important asymptotic properties of likelihood-based estimation under this standard model have not been established. In this paper, we prove that the maximum likelihood estimator is global and unique. An interesting secondary result entails the uniform consistency of a class of limit relations in a tight neighbourhood of the true shape parameter.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1985

Mixed models and reduction method for dynamic analysis of anisotropic shells

A time-domain computational procedure is presented for predicting the dynamic response of laminated anisotropic shells. The two key elements of the procedure are: (1) use of mixed finite element models having independent interpolation (shape) functions for stress resultants and generalized displacements for the spatial discretization of the shell, with the stress resultants allowed to be discontinuous at interelement boundaries; and (2) use of a dynamic reduction method, with the global approximation vectors consisting of the static solution and an orthogonal set of Lanczos vectors. The dynamic reduction is accomplished by means of successive application of the finite element method and the classical Rayleigh-Ritz technique. The finite element method is first used to generate the global approximation vectors. Then the Rayleigh-Ritz technique is used to generate a reduced system of ordinary differential equations in the amplitudes of these modes. The temporal integration of the reduced differential equations is performed by using an explicit half-station central difference scheme (Leap-frog method). The effectiveness of the proposed procedure is demonstrated by means of a numerical example and its advantages over reduction methods used with the displacement formulation are discussed.

Noor, A. K.↗
NASA NTRS1988

R Aquarii - The large-scale optical nebula and the Mira variable position

The R Aquarii symbiotic star system is surrounded by a large-scale optical nebula. Observations of the nebular forbidden O III structure are presented and its morphological significance are discussed in context with previously observed small-scale radio-continuum features, which may be related. It is suggested that a precessing accretion disk may explain the global features of both the large-scale optical emission and the small-scale radio emission. Moreover, an accurate position has been determined of the system's Mira, which suggests that a recent theoretical model, yielding an egg-shaped central H II region for symbiotic systems with certain physical parameters, may apply to R Aquarii. The optical position of the 387 d period Mira variable is consistent with previous findings in the radio, that SiO maser emission is far removed from the Mira photosphere.

Michalitsianos, A. G.↗
NASA NTRS2006

Variable Stiffness Panel Structural Analyses With Material Nonlinearity and Correlation With Tests

Results from structural analyses of three tow-placed AS4/977-3 composite panels with both geometric and material nonlinearities are presented. Two of the panels have variable stiffness layups where the fiber orientation angle varies as a continuous function of location on the panel planform. One variable stiffness panel has overlapping tow bands of varying thickness, while the other has a theoretically uniform thickness. The third panel has a conventional uniform-thickness [plus or minus 45](sub 5s) layup with straight fibers, providing a baseline for comparing the performance of the variable stiffness panels. Parametric finite element analyses including nonlinear material shear are first compared with material characterization test results for two orthotropic layups. This nonlinear material model is incorporated into structural analysis models of the variable stiffness and baseline panels with applied end shortenings. Measured geometric imperfections and mechanical prestresses, generated by forcing the variable stiffness panels from their cured anticlastic shapes into their flatter test configurations, are also modeled. Results of these structural analyses are then compared to the measured panel structural response. Good correlation is observed between the analysis results and displacement test data throughout deep postbuckling up to global failure, suggesting that nonlinear material behavior is an important component of the actual panel structural response.

Wu, K. Chauncey↗
NASA NTRS2004

Modeling the Salar de Uyuni, Bolivia as an Equipotential Surface of Earth's Gravity Field

The salar de Uyuni is a massive dry salt lake that lies at the lowest point of an internal/drainage basin in the Bolivian Altiplano. Its topography is remarkable for its extraordinary flatness over almost a full degree of latitude and longitude. We surveyed a 54 x 45 km region of the salar with kinematic GPS in September, 2002 and found a topographic range of only 80 cm over the entire surveyed area. Furthermore, the survey revealed distinct surface features with several dominant wavelengths and orientations. Some of these appear to be aligned with orographic features that intersect the salar, leading us to conjecture that they are the surface expression of high-density mountains that have been buried by low-density basin sediments. Over the oceans, a similar correspondence between basin bathymetry and surface topography is exploited to map the seafloor using sea-surface satellite altimetry measurements, with the sea surface following geoid undulations due to the underwater mass distribution. On the salar, annual flooding creates a shallow lake whose surface also lies on a equipotential surface shaped by the distribution of underlying mass. The link to the actual salar surface is via the dissolution and redeposition of salt by the lake waters, which appears to push the system to an equilibrium of constant water depth and the coincidence of the shapes of the lake surface and bottom. To test our hypothesis about the origin of the surface features on the salar, we compare our GPS survey elevations with the equipotential surface generated from local gravity measurements in conjunction with gravity and potential values from the EGM96 global geopotential model. 50% of the variance of the GPS elevations can be explained by equipotential surface undulations from the EGM96 model alone, and an additional 40% is explained by the shorter-wavelength equipotential surface derived from local gravity. We examine the unexplained 10% of elevation variance from the standpoint of errors in the equipotential surface calculation and possible unmodelled surface processes.

Borsa, Adrian↗
NASA NTRS2003

Effects of Non-Sphericity on Mineral Dust Modeling

The dependency of non-sphericity on gravitational settling of mineral dust particles is parameterized for prolate ellipsoids and Reynolds number lower than 2. The settling speed is numerically solved from the momentum equation as a function of particle diameter and aspect ratio. The reduction of settling speed due to non-sphericity is included in the GO-CART model to simulate dust size distribution for April 2001. Two numerical schemes for solving sedimentation are compared. For particles of diameter greater than 5 micron the simulated size distribution is sensitive to the numerical sedimentation scheme. Changing the particle shape from spherical to non-spherical with lambda=2, makes little difference to the simulated surface concentration and size distribution except at the periphery of the dust sources. However, when very elongated particles (lambda=5) are simulated the differences between non-spherical and spherical particles are significant. With limited in-situ measurements reporting most frequent lambda around 1.5, the overall effects on global modeling is rather negligible and the essential benefit is to relax the CFL condition of Eulerian settling schemes.

Ginoux, Paul↗
DOE OSTI2020

Reconstruction of Electron and Ion Distribution Functions in a Magnetotail Reconnection Diffusion Region

In the diffusion region of magnetotail reconnection, particle distributions are highly structured, exhibiting triangular shapes and multiple striations that deviate dramatically from the Maxwellian distribution. Fully kinetic simulations have been demonstrated to be capable of producing the essential structures of the observed distribution functions, yet are computationally not feasible for 3D global simulations. The fluid models used for large-scale simulations, on the other hand, do not have the kinetic physics necessary for describing reconnection accurately. Our study aims to bridge fully kinetic and fluid simulations by quantifying the information required to capture the non-Maxwellian features in the distributions underlying the closures used in the fluid code. Here, we compare the results of fully kinetic simulations with observed electron velocity distributions in a magnetotail reconnection diffusion region and use the maximum entropy model to reconstruct electron and ion distributions using various numbers of moments obtained from the simulation. Our results indicate that using only local moments, the maximum entropy model can reproduce many of the features of the distributions: (1) the electron outflow distribution with a tilted triangular structure is reproduced with 21 or more moments in agreement with Ng et al. and (2) counterstreaming distributions can be captured with the 35-moment model when the separation in velocity space between the populations is large.

58 GEOSCIENCES↗
NASA NTRS1985

Discrete Random Media Techniques for Microwave Modeling of Vegetated Terrain

Microwave remote sensing of vegetated terrain has been studied. Vegetation is modeled so that backscattered radar signals can be used to infer parameters which characterize the vegetation and underlying ground. The vegetation is modeled by discrete lossy dielectric scatterers with prescribed characteristics. The goal of the modeling effort is to remotely sense vegetation type (classification), growth stage, and plant/ground moisture. This information can then be used as input into agricultural, forestry and global circulation models. The microwave frequency spectrum, particularly L and C bands, are especially appropriate for this purpose since the wavelength is comparable to plant leaf and stem size. The resulting resonant interaction leads to backscattered data highly depend on plant shape and orientation. In addition, the transparent nature of the atmosphere in this frequency regime allows for algorithm development which requires no atmospheric correction.

Lang, R. H.↗
NASA NTRS2008

Using Pressure- and Temperature-Sensitive Paint for Global Surface Pressure and Temperature Measurements on the Aft-Body of a Capsule Reentry Vehicle

Pressure Sensitive Paint (PSP) and Temperature Sensitive Paint (TSP) were used to visualize and quantify the surface interactions of reaction control system (RCS) jets on the aft body of capsule reentry vehicle shapes. The first model tested was an Apollo-like configuration and was used to focus primarily on the effects of the forward facing roll and yaw jets. The second model tested was an early Orion Crew Module configuration blowing only out of its forward-most yaw jet, which was expected to have the most intense aerodynamic heating augmentation on the model surface. This paper will present the results from the experiments, which show that with proper system design, both PSP and TSP are effective tools for studying these types of interaction in hypersonic testing environments.

Watkins, A. Neal↗
DOE OSTI2021

Joint effects of climate, tree size, and year on annual tree growth derived from tree–ring records of ten globally distributed forests

Tree rings provide an invaluable long-term record for understanding how climate and other drivers shape tree growth and forest productivity. However, conventional tree-ring analysis methods were not designed to simultaneously test effects of climate, tree size, and other drivers on individual growth. This has limited the potential to test ecologically relevant hypotheses on tree growth sensitivity to environmental drivers and their interactions with tree size. Here, we develop and apply a new method to simultaneously model nonlinear effects of primary climate drivers, reconstructed tree diameter at breast height (DBH), and calendar year in generalized least squares models that account for the temporal autocorrelation inherent to each individual tree's growth. We analyze data from 3811 trees representing 40 species at 10 globally distributed sites, showing that precipitation, temperature, DBH, and calendar year have additively, and often interactively, influenced annual growth over the past 120 years. Growth responses were predominantly positive to precipitation (usually over ≥3-month seasonal windows) and negative to temperature (usually maximum temperature, over ≤3-month seasonal windows), with concave-down responses in 63% of relationships. Climate sensitivity commonly varied with DBH (45% of cases tested), with larger trees usually more sensitive. Trends in ring width at small DBH were linked to the light environment under which trees established, but basal area or biomass increments consistently reached maxima at intermediate DBH. Accounting for climate and DBH, growth rate declined over time for 92% of species in secondary or disturbed stands, whereas growth trends were mixed in older forests. These trends were largely attributable to stand dynamics as cohorts and stands age, which remain challenging to disentangle from global change drivers. By providing a parsimonious approach for characterizing multiple interacting drivers of tree growth, our method reveals a more complete picture of the factors influencing growth than has previously been possible.

generalized least squares (GLS)↗
NASA NTRS2024

Revised estimates of NO 2 reductions during the COVID-19 lockdowns using updated TROPOMI NO 2 retrievals and model simulations

The TROPOspheric Monitoring Instrument (TROPOMI) observed unprecedented declines in NO 2 vertical column densities (VCD) over the world's most densely populated cities during the 2020 COVID-19 lockdowns. These favorable changes in NO 2 air quality were correlated with sharp reductions in traffic volume and economic activity during the lockdowns. In this comprehensive global study, we provide revised estimates of the declines in anthropogenic emissions for 36 megacities using a novel methodology for disentangling the anthropogenic emissions from the meteorological transport and natural variability. We further quantify the uncertainty associated with changes in the a priori profile shape information during the lockdowns due to reduced emissions. Satellite NO 2 retrieval techniques calculate an air mass factor that requires a priori NO 2 profile shape information representative of the local atmosphere. This information, which is typically obtained from a chemical transport model (CTM), was not available for the early studies. This study also accounts for the satellite sampling errors resulting from the selective sampling of non-cloudy scenes during the study period. For our analysis, we used CTM simulations that were generated with and without COVID-impacted emissions. We perform retrievals of tropospheric NO 2 columns with the NASA NO 2 algorithm, and then use observed and simulated data to disentangle the meteorological transport from the contribution due anthropogenic emissions. We found that the meteorological transport was most significant source of variability ranging between −35% and 22% of the change total tropospheric VCD. We also find that not accounting for changes in the a priori NO 2 profile shape information during the lockdowns resulted in systematic retrieval errors that were up to 12% of the estimated decline, and the elimination of cloud contaminated scenes resulted in sampling errors that in general ranged between varied ±15%.

NO2↗
DOE OSTI2020

Effect of heating/cooling dynamics in the hysteresis loop and tunable IR emissivity of VO 2 thin films

We experimentally investigate the semiconductor-to-metal transition (SMT) in vanadium dioxide thin films using an infrared thermographic technique. During the semiconductor to metal phase change process, VO 2 optical properties dynamically change and infrared emission undergoes a hysteresis loop due to differences between heating and cooling stages. The shape of the hysteresis loop was accurately monitored under different dynamic heating/cooling rates. In order to quantify and understand the effects of different rates, we used a numerical modelling approach in which a VO 2 thin layer was modeled as metamaterial. The main experimental findings are interpreted assuming that both the rate of formation and shape of metallic inclusions are tuned with the heating/cooling rate. The structural transition from monoclinic to tetragonal phases is the main mechanism for controlling the global properties of the phase transition. However, our experimental results reveal that the dynamics of the heating/cooling process can become a useful parameter for further tuning options and lays out a macroscopic optical sensing scheme for the microscopic phase change dynamics of VO 2 . Our study sheds light on phase-transition dynamics and their effect on the infrared emission spectra of VO 2 thin films, therefore enabling the heating/cooling rate to be an additional parameter to control infrared emission characteristics of thermal emitters. The hysteresis loop represents the phase coexistence region, thus being of fundamental importance for several applications, such as the operation of radiative thermal logic elements based on phase transition materials. For such applications, the phase transition region is shifted for heating and cooling processes. We also show that, depending on the way the phase change elements are heated, the temperature operation range will be slightly modified.

42 ENGINEERING↗