Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “geologic mapping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Evaluation of ERTS-1 imagery for spectral geological mapping in diverse terranes of New York State

The author has identified the following significant results. Linear anomalies dominate the new geological information derived from ERTS-1 imagery, total lengths now exceeding 6000 km. Experimentation with a variety of viewing techniques suggest that conventional photogeologic analyses of band 7 results in the location of more than 97 percent of all linears found. Bedrock lithologic types are distinguishable only where they are topographically expressed or govern land use signatures. The maxima on rose diagrams for ERTS-1 anomalies correspond well with those for mapped faults and topographic lineaments. A multiscale analysis of linears showed that single topographic linears at 1:2,500,000 became dashed linears at 1:1,000,000 aligned zones of shorter parallel, en echelon, or conjugate linears at 1:500,00. Most circular features found were explained away by U-2 airphoto analysis but several remain as anomalies. Visible glacial features include individual drumlins, best seen in winter imagery, drumlinoids, eskers, ice-marginal drainage channels, glacial lake shorelines and sand plains, and end moraines.

Isachsen, Y. W.↗

Use of radar image texture in geologic mapping

Large slope angle radar and small slope angle radar techniques are discussed. The techniques are developed to aid in the geologic interpretation of synthetic aperture radar (SAR) images. The application presented is for heavy vegetation and where very little other data can be obtained directly from remote sensing images. To understand the relationships between image texture, topography, lithology, geomorphology, and climate improves, textural information from SAR images are used for the identification of rock types to discriminate units. An active program is to integrate textural information from radar images directly with backscatter data from the same images, and with compositional information derived from visible near infrared sensors such as LANDSAT is explored. The role of quantitative textural information in this type of multisensor analysis which promises to be significant is outlined.

Farr, T. G.↗

Preliminary Geological Map of the Peace Vallis Fan Integrated with In Situ Mosaics From the Curiosity Rover, Gale Crater, Mars

A geomorphically defined alluvial fan extends from Peace Vallis on the NW wall of Gale Crater, Mars into the Mars Science Laboratory (MSL) Curiosity rover landing ellipse. Prior to landing, the MSL team mapped the ellipse and surrounding areas, including the Peace Vallis fan. Map relationships suggest that bedded rocks east of the landing site are likely associated with the fan, which led to the decision to send Curiosity east. Curiosity's mast camera (Mastcam) color images are being used to refine local map relationships. Results from regional mapping and the first 100 sols of the mission demonstrate that the area has a rich geological history. Understanding this history will be critical for assessing ancient habitability and potential organic matter preservation at Gale Crater.

Gale Crater↗

Geologic mapping of Indonesian rain forest with analysis of multiple SIR-B incidence angles

The discrimination and mapping capabilities are to be evaluated for shuttle imaging radar-B (SIR-B) images of geologic features in Indonesia that are covered by equatorial rain forest canopy. The SIR-B backscatter from the rain forest at L-band is to be compared to backscatter acquired by the SEASAT scatterometer system at Ku-band ever corresponding areas. The approach for data acquisition, handling, and analysis and the expected results of the investigation are discussed.

Ford, J. P.↗

Geologic Mapping of the Beta-Atla-Themis (BAT) Region of Venus: A Progress Report

The BAT province is of particular interest with respect to evaluating Venus geologic, tectonic, and volcanic history and provides tests of global paradigms regarding her thermal evolution. The BAT is "ringed" by volcano-tectonic troughs (Parga, Hecate, and Devana Chasmata), has an anomalously high-density of volcanic features with concentrations 2-4 times the global average [1], and is spatially coincident with "young terrain" as illustrated by Average Surface Model Ages [2, 3]. The BAT province is key to understanding Venus current volcanic and tectonic modes, which may provide insight for evaluating Venus historical record. Several quadrangles, two 1:5,000,000 scale - Isabella (V-50) Quadrangle and Devana Chasma (V-29) Quadrangle and two 1:10,000,000 scale - Helen Planitia (I-2477) and Guinevere Planitia (I-2457), are in various stages of production (Figure 1). This abstract will report on their levels of completion as well as highlight some current results and outstanding issues.

Bleamaster, Leslie F., III↗

Preliminary geologic map of the region around the candidate Proclus Apollo landing site, part J

The Proclus Crater region was mapped to test the value, for photogeologic mapping purposes, of Apollo 15 metric photographs and to estimate the scientific value of the area as a potential landing site. Adjacent frames of the metric photography were overlapped with the base frame to provide stereographic images. Because of the high quality of the photographs, it was found that the geologic units could be more definitely interpreted and dated than those of earlier maps. The photographs tend to confirm the earlier interpretation of the rugged area as composed of bedrock uplifted when the Crisium basin formed. They also suggest that an earlier predominantly volcanic interpretation of the terra in this area might be replaced by an interpretation in which mass wasting and fracturing play the major roles in producing different terrain types. It was concluded that because of apparent lithologic homogeneity, the terra of the Proclus region is an undesirable objective for an extensive manned lunar landing mission.

Wilhelms, D. E.↗

Small-scale imagery: A useful tool for mapping geological features in the Texas Gulf Coastal plain

A sample of satellite imagery includes photographs and multispectral scanner imagery from the Apollo, LANDSAT, and Skylab spacecraft over an area west of Houston, Texas. Large circular features and lineaments can readily be mapped. One of the circular features identified by drainage, vegetation, and soil-tone anomalies, occurs in Fort Bend County, Texas, and covers an area about 25 miles in diameter. Another circular feature lies to the north, immediately west of Houston, and is about 15 miles in diameter. These features represent the surface expression of deeply-buried positive structures. It is recommended that regional geological studies begin with photointerpretations of high-altitude aircraft and synoptic space imagery, space imagery provides the synoptic view of rapid evaluation of large-scale features, and, at enlarged scales, the resolution required for detailed study of selected areas of structures.

Amsbury, D. L.↗

Geologic Mapping of the Chaac-Camaxtli Region of Io from Galileo Imaging Data

We produced a geologic/geomorphologic map of the Chaac-Camaxtli region of Io's leading anti-Jovian hemisphere using regional resolution (186 m/pixel) Galileo imaging data collected during orbit I27 (February 2000) integrated with lower resolution (1.4 km/pixel) color data, along with other Galileo imaging and spectral data. This is the first regional map of Io made from Galileo data. Nine color and geomorphologic units have been mapped, and the close proximity of dark and various colored bright materials suggests that there is an intimate interaction between (presumably) silicate magmas and sulfur-bearing volatile materials that produced a variety of explosive and effusive deposits in the recent geologic past. This region of Io is dominated by 11 volcanic centers, most of which are paterae that are analogous in morphology to terrestrial calderas but larger in size. Mapping of structural features indicates that most of the active regions occur in topographic lows, and less active or inactive paterae are associated with topographic highs. This indicates that crustal thickness variations influence magma access to the surface. Surface changes in this region since the Voyager flybys (1979) are relatively minor (additional bright and dark flows, color changes), although several active vents have migrated within paterae. This observation, along with the identification of the relatively regular spacing of paterae (approx. 100- 150 km) along a line, may indicate there are multiple interlacing fractures in the crust that serve as magma conduits from the interior. This connection between volcanism and tectonism may have implications for tidal heating mechanisms and their effect on Io's lithosphere. Some inactive patera floors may be evolving into bright plains material, which, if composed of silicates, might explain the strength of Io's crust to support steep patera walls and tall mountains.

Williams, David A.↗

Geologic Mapping of the Chaac-Camaxtli Region of Io from Galileo Imaging Data

We produced a geologic/geomorphologic map of the Chaac-Camaxtli region of Io's leading anti-Jovian hemisphere using regional resolution ( 186 m/pixel) Galileo imaging data collected during orbit I27 (February 2000) integrated with lower resolution (1.4 km/pixel) color data, along with other Galileo imaging and spectral data. This is the first regional map of Io made from Galileo data. Nine color and geomorphologic units have been mapped, and the close proximity of dark and various colored bright materials suggests that there is an intimate interaction between (presumably) silicate magmas and sulfur-bearing volatile materials that produced a variety of explosive and effusive deposits in the recent geologic past. This region of Io is dominated by 11 volcanic centers, most of which are paterae that are analogous in morphology to terrestrial calderas but larger in size. Mapping of structural features indicates that most of the active regions occur in topographic lows, and less active or inactive paterae are associated with topographic highs. This indicates that crustal thickness variations influence magma access to the surface. Surface changes in this region since the Voyager flybys are relatively minor (additional bright and dark flows, color changes), although several active vents have migrated within paterae. This observation, along with the identification of the relatively regular spacing of paterae (approx. 100 - 150 km) along a line, may indicate there are multiple interlacing fractures in the crust that serve as magma conduits from the interior. This connection between volcanism and tectonism may have implications for tidal heating mechanisms and their effect on Io's lithosphere. Some inactive patera floors may be evolving into bright plains material, which, if composed of silicates, might explain the strength of Io's crust to support steep patera walls and tall mountains.

Williams, David A.↗

Satellite radars for geologic mapping in tropical regions

This paper presents interpretations of the satellite radar images of cloud-covered portions of Indonesia and Amazonia obtained from NASA's Shuttle imaging radar experiments in 1981 (SIR-A) and 1984 (SIR-B). It was found that different terrain categories observed from distinctive image textures correlate well with major lithologic associations. The images show geologic structures at regional and local scales. The SIR-B images of East Kalimantan, Indonesia, reveal structural features and terrain distributions that had been overlooked or not perceived in previous surface mapping. Variability in radar response from the vegetation cover is interpretable only in coastal areas or alluvial areas that are relatively level.

Ford, J. P.↗

Geologic mapping using thermal images

Thermal radiance data from the Heat Capacity Mapping Mission (HCMM) satellite has been used to measure surface reflectance data and to provide additional material composition information through remote sensing. The primary goal was to investigate the utility of HCMM data for geologic applications. Three techniques were used for displaying and combining thermal and visible near infrared (VNIR) data for two desert areas in southern California (Trona and Pisgah): color additive composites (CAC) for day and night IR and day VNIR, principal components, and calculation of thermal inertia images. The HCMM thermal data were more effective than Landsat data in producing separation of compositionally different areas including volcanic and intrusive rocks. The satellite CAC data produced an image for a 1 x 2 degree area, and the color picture was enlarged to a scale of 1:250,000. Playa composition, moisture content, presence of standing water, and vegetation cover were displayed in a variety of colors according to physical characteristics. Areas such as sand dunes were not distinguishable because of the coarse 500-mm HCMM resolution. HCMM thermal data have shown a new dimension to geologic remote sensing, and future satellite missions should allow the continued development of the thermal infrared data for geology.

Abrams, M. J.↗

A comparison of infrared, radar, and geologic mapping of lunar craters

Between 1000 and 2000 infrared (eclipse) and radar anomalies have been mapped on the nearside hemisphere of the moon. A study of 52 of these anomalies indicates that most are related to impact craters and that the nature of the infrared and radar responses is compatible with a previously developed geologic model of crater aging processes. The youngest craters are pronounced thermal and radar anomalies; that is, they have enhanced eclipse temperatures and are strong radar scatterers. With increasing crater age, the associated thermal and radar responses become progressively less noticeable until they assume values for the average lunar surface. The last type of anomaly to disappear is radar enhancement at longer wavelengths. A few craters, however, have infrared and radar behaviors not predicted by the aging model. One previously unknown feature - a field strewn with centimeter-sized rock fragments - has been identified by this technique of comparing maps at the infrared, radar, and visual wavelengths.

Thompson, T. W.↗

Complex early rifting in Valles Marineris: Results from preliminary geologic mapping of the Ophir Planum Region of Mars

Photogeologic mapping of the Ophir Planum quadrangle was undertaken to solve two main problems: (1) what controlled the location, orientation, and growth of Ophir Planum grabens; and (2) how are the grabens and trough faulting related. The rich geological history of the Ophir Planum quadrangle underscores the fundamental importance of faulting in the early growth of Valles Marineris.

Schultz, Richard A.↗

Artificial intelligence for geologic mapping with imaging spectrometers

This project was a three year study at the Center for the Study of Earth from Space (CSES) within the Cooperative Institute for Research in Environmental Science (CIRES) at the University of Colorado, Boulder. The goal of this research was to develop an expert system to allow automated identification of geologic materials based on their spectral characteristics in imaging spectrometer data such as the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS). This requirement was dictated by the volume of data produced by imaging spectrometers, which prohibits manual analysis. The research described is based on the development of automated techniques for analysis of imaging spectrometer data that emulate the analytical processes used by a human observer. The research tested the feasibility of such an approach, implemented an operational system, and tested the validity of the results for selected imaging spectrometer data sets.

Kruse, F. A.↗

An interpretation of a geologic map of Fannin County, Texas, prepared by ADP techniques from ERTS MSS data

Multispectral scanner data, collected by ERTS-1 from an area in northeast Texas underlain by structurally simple cretaceous sedimentary rocks, were analyzed using several automatic data processing techniques. Training areas for the computer analysis were selected in three ways using: (1) an unsupervised classifier, (2) the unsupervised classifier to further refine training areas, and (3) available ground information. The first two methods utilize the capability of the unsupervised classifier to the unsupervised classifier to group resolution elements with similar spectral properties. With the imagery produced by these procedures, several geologic features can be identified. The most easily recognizable features are streams and other water bodies. The approximate location of contacts between several rock units can be mapped.

Henderson, J. A., Jr.↗

Evaluation of ERTS imagery for spectral geological mapping in diverse terranes of New York State

The author has identified the following significant results. Preliminary visual examination of film positives of thirty ERTS-1 scenes obtained over New York State and adjacent areas indicates the following: (1) sixty percent of the imagery has a cloud cover of 70-100 percent, twenty-five percent has a cloud cover of 0-30 percent, and the remainder has a cover of 40-65 percent; (2) on the useable imagery, the spectral lines which may turn out to be geologically-linked totals as follows: spectral linears, 5200 km; broadly curved lines (spectral curvilinears), 700 km; major forest boundaries, 3100 km; areas with spectral geological fabric, 3100 sgkm. In the central and northwest Adirondacks, known lineaments and faults were subtracted from the spectral linears leaving a residue which totals 160 km in the central Adirondacks and 230 km in the northwest Adirondacks. It must be emphasized that these are spectral linears which have not yet been checked out against any ground truth except geological.

Isachsen, Y. W.↗