Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “full report”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Pretest Report for the Full Span Propulsive Wing/Canard Model Test in the NASA Langley 4 x 7 Meter Low Speed Wind Tunnel Second Series Test

A full span propulsive wing/canard model is to be tested in the NASA Langley Research Center (LaRC) 4 x 7 meter low speed wind tunnel. These tests are a continuation of the tests conducted in Feb. 1984, NASA test No.290, and are being conducted under NASA Contract NAS1-17171. The purpose of these tests is to obtain extensive lateral-directional data with a revised fuselage concept. The wings, canards, and vertical tail of this second test series model are the same as tested in the previous test period. The fuselage and internal flow path have been modified to better reflect an external configuration suitable for a fighter airplane. Internal ducting and structure were changed as required to provide test efficiency and blowing control. The model fuselage tested during the 1984 tests was fabricated with flat sides to provide multiple wing and canard placement variations. The locations of the wing and canard are important variables in configuration development. With the establishment of the desired relative placement of the lifting surfaces, a typically shaped fuselage has been fabricated for these tests. This report provides the information necessary for the second series tests of the propulsive wing/canard model. The discussion in this report is limited to that affected by the model changes and to the second series test program. The pretest report information for test 290 which is valid for the second series test was published in Rockwell report NR 83H-79. This report is presented as Appendix 1 and the modified fuselage stress report is presented as Appendix 2 to this pretest report.

Stewart, V. R.↗

19-LW-045 Full Length Final Report. Molecular Mechanisms of Bacterial Pathogenesis: Waging the Arms Race with Superbugs

As the current global pandemic makes abundantly clear, we need a better understanding of infectious disease to safeguard human health, the economy and global security. Modern omics techniques hold the promise of providing a comprehensive understanding of the molecular mechanisms of life, including causes of pathogenesis from infectious disease at the molecular level, but we there is a serious gap in annotation of gene function. For as much as half of the genes and gene products encoded in genomes the molecular and/or cellular function is unknown or only partially understood. Recent innovations in fluorescence microscopy for live cell imaging and genetic engineering make it possible to determine the temporal correlation between molecular events, such as a gene being expressed due to host-pathogen interaction, and cellular events, such as bacterial invasion of immune cells. This is turn allows us to gain new insight as to the molecular and cellular role of individual genes and will enable the discovery and validation of new molecular mechanisms essential for infectious disease. Knowing the molecular mechanisms of disease processes will provide new therapeutic targets or novel countermeasure strategies. We aimed to develop a lattice light sheet fluorescence microscope as a unique resource at LLNL for long time course live cell imaging experiments; to develop the reagents and cell lines needed to monitor molecular events during the course pathogenic bacteria infecting mammalian immune cells; and to demonstrate that we could capture molecular events during an infection. We fully commissioned the LLNL lattice light sheet microscope and conducted initial proof of principle imaging experiments on mammalian immune cells and pathogenic bacteria. It is clear from the experience gained that long time course live cell imaging has tremendous potential to help elucidate molecular mechanisms of host-pathogen interactions and to help annotate gene function, which would establish a basis for new countermeasures. It is also clear that if live cell imaging is to realize its full potential new data processing and analysis tools will need to be developed to facilitate analysis of molecular events within cells; new sample chambers and stages could facilitate studies with a wider range of cell and tissue types; and alternative molecular tagging methods need to be explored to enable more facile engineering of cells labeled with molecular specificity.

59 BASIC BIOLOGICAL SCIENCES↗

Direct Measurement of Mass-Temperature Distributions in the Core of Implosions on the National Ignition Facility (Full Technical Final Report)

Inertial confinement fusion plasmas are characterized by several kilo-electron-volt (keV) electron temperatures and ion and electron densities approaching 100 to 1000 times solid. In these implosions which simulate the dynamics of our sun, spectroscopic dopants can lead to detailed exploration of the plasma gradients that are not possible in other places. This is both in the central core pressure and temperature as well as any “mix” resultant from ablation and hydrodynamic interactions. This work will show new Bayesian atomic physics models applied to ICF plasmas to give both the temperature and density of the internal hot spot to better describe the physical nature of these implosions along with trying to spatially resolve the mix coming from the ablator region. The mission impact is to demonstrate this effect and to lead to a more quantitative description of mix in inertial confinement plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Addressing qubits with a software-defined radio FPGA (Full Technical Final Report)

Superconducting transmons can be configured as qubits and can also be used for weak signal axion searches. During a prior LDRD (17-ERD-006), a robust capability for system simulation and analysis, algorithm development, algorithm to FPGA workflow and experimental measurements was developed. During that project it was determined that a new software-defined radio FPGA would be a significant improvement in cost, simplicity, and software maintainability over the X6-1000M FPGA plus RF front-end system that had been used. In this Feasibility Study, we successfully developed the interface to the new NI USRP-2954R SDR platform, generated and optimized the VHDL of the existing algorithms, and experimentally tested the new FPGA system on real qubit in the laboratory. These tests showed it had the same SNR on weak measurements as the prior FPGA.

42 ENGINEERING↗

Plasma Photonics: Manipulating Light Using Plasmas (Full Technical Final Report)

In this LDRD, we made significant advances on multiple fronts on the investigation and design of plasma-based optical structures to manipulate light at extreme intensities. We have unveiled new fundamental properties of laser-plasma interaction that were leveraged to introduce transformative applications. We first investigated new ways to generate high-amplitude plasma-based optical structures, based on the auto-resonance mechanism in order to produce refractive structures in plasmas. New insights into the interaction of such plasma structures with light waves allowed us to propose new methods for polarization manipulation and control for high-intensity lasers in the nonlinear regime, i.e. allowing the manipulation of an intense laser via its interaction with a less intense “control” laser beam in plasmas. Another application that we demonstrated experimentally is the capability to manipulate the velocity of light waves in plasmas by tailoring its refractive index; we reported the first demonstration of “slow light” and supra-luminal light propagation in plasmas. We also developed a new technological concept that would allow the probing of the type of plasma structures investigated in such applications, using high-bandwidth laser probing [Ludwig Phys. Plasmas 2019]. Finally, first steps were taken towards the demonstration of a plasma-based amplifier and compressor for the National Ignition Facility, in order to achieve powers equal of greater than those delivered by the Advanced Radiographic Capability (ARC). This technique uses a plasma-based grating acting like a compressor and amplifier, which could potentially compress and amplify an 88 ps, 56 J beam from the National Ignition Facility to <10 ps and hundreds of J.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Accurate temperature determination from XRD and EXAFS measurements (Full Technical Final Report)

Measuring temperature is of fundamental importance for High Energy Density science (HED), for studying melting, phase transitions and equations of state. However, temperature determination of high pressure and high temperature (0.1-1 eV) condensed matter remains one of the biggest challenges in such experiments. This project used a combination of advanced experimental techniques and state-of-the-art computational methods to construct a framework relating the observed attenuation of X-ray diffraction (XRD) and Extended X-ray Absorption Fine Structure (EXAFS) signals due to thermal fluctuations to the actual temperature achieved in the experiments. This approach was benchmarked against low temperature resistive heating diamond anvil cell (DAC) experiments and cross-validated at higher pressure and temperature by combining the two complementary and independent techniques, diffraction and EXAFS.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Instrumented Lid: Full Instrumentation System Testing

This report describes full system testing of an instrumentation system for the monitoring of aluminum clad spent nuclear fuel (ASNF). The requirements for this system were laid out in a previous document, with respect to former studies, and the details of project actualization were reported. The reader is directed to these references for more background information. In short, a team composed of personnel from Savannah River National Laboratory (SRNL) and Idaho National Laboratory have been tasked with the design and fabrication of an instrumented assembly for remote sampling, monitoring, and radiation testing (SMART) for demonstration and surveillance of the dry storage environment and conditions of ASNF in a DOE standardized canister. SRNL proposed the fabrication of two systems to accomplish this goal: 1) an instrumentation system consisting of gas and particle collection, temperature, humidity, pressure, and radiation monitoring; and 2) a lid assembly consisting of a custom-designed lid and hat, together with a custom fuel basket. The corresponding instrumentation system is shown in the piping and instrumentation diagram. The individual functionality tests of the instrument system sensor components were performed, and the results were reported in the report “Instrumented Lid- System Functionality Testing.” Savannah River National Laboratory, September 1, 2019.7 The sensor components of instrumentation system have been mounted and tested in-line with a 6” diameter test canister, and the results are reported in this document.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Report on Plasma Spraying of Full-Sized Foils (FY13)

This report is the deliverable fulfilling task B40700. The application of the Zr diffusion barrier between the U-­Mo fuel and the Al cladding has been an ongoing area of research [1-8]. The goal of the research described in this report was to demonstrate the plasma spraying technique for depositing zirconium (Zr) onto full sized U-Mo foils to demonstrate scale up of the process from the mini foil samples (1”x4”x ~0.015”) coated previously. Full size denotes one of the actual fuel foil sizes for one of the five research reactors (MURR, NIST, MIT, HFIR, ATR) to be converted to LEU fuel in the US research reactor Convert program. The smallest full sized fuel foil is for the NIST reactor with a size of 11.37”x2.436”x0.020”. The largest full sized fuel foil is for the ATR reactor with a size of 48.01”x3.43”x0.020”. The widest full sized fuel foil is for the MURR reactor with a size of 24”x4.052”x0.020”. The current LANL vacuum plasma spray system can accommodate a foil length of 24” or less. Therefore, as a demonstration of the widest foil in the program and the maximum length foil that can be processed on the current LANL system, a nominal 24”x4”x0.020” foil was chosen as the goal for scale up activities.

36 MATERIALS SCIENCE↗

A Systematic, Polynomial-Cost Approach to Exact Correlation Energies (Final Technical Report)

The full configuration interaction (FCI) wave function provides the exact solution to the Schrödinger equation in a given basis set. While FCI is intractable due to exponential computational costs, the many-body expansion (or the method of increments) can reduce scaling to a low-order polynomial with system size. This project entailed advances in the incremental FCI (iFCI) approach, designed to allow iFCI to reach larger system sizes and maintain its intrinsic high accuracy. This document describes advances in solvers for iFCI, strategies to treat multiple charge and spin states, and virtual state management methods to reduce memory requirements. Overall, this project allows iFCI to correlate (for the first time) 142 valence electrons in 444 orbitals in a realistic model of a transition metal complex.

74 ATOMIC AND MOLECULAR PHYSICS↗

Measuring Radioactivity from Fukushima Daiichi in New Mexico

On March 11, 2011, the Fukushima Daiichi nuclear power plant was damaged by the tsunami that followed the 'Great East Japan Earthquake,' and the reactor subsequently leaked radioactive material. In response, LANL augmented the routine ambient (AIRNET) and stack (Rad-NESHAP) measurements with three high-volume samplers: No.167 at the Old White Rock Fire Station; No.173 at the TA-49 gate, and No.211 at the Los Alamos Medical Center. Previous accidents, such as the Three-Mile-Island accident in 1979 and the Chernobyl accident in 1986, indicated that the most likely releases were (a) the noble gases: krypton and xenon; and (b) the volatile elements: cesium, tellurium, and iodine. At the latitude of Fukushima, the predominant winds across the Pacific Ocean are from west to east, and models predicted that the plume would arrive in the western US on about March 18. By this time the shorter-lived isotopes would have decayed. Therefore, the expected radionuclides were xenon-133, cesium-134, cesium-136, cesium-137, tellurium-132, iodine-131, and iodine-132. As expected, cesium-134, cesium-136, cesium-137, tellurium-132, iodine-131, and iodine-132 were all detected by all three high-volume samplers during March 17-21. The concentrations peaked during the March 24-28 period. After this, concentrations of all nuclides declined. In general, the concentrations were consistent with those measured by the EPA RadNet system and many other monitoring systems throughout the world. At the time of writing, preliminary results from the AIRNET and Rad-NESHAP systems are being reported. More detailed results are described in LA-UR-11-10304 and will be reported in full in the annual environmental report for 2011. All previous releases from nuclear reactors have been dominated by noble gases, primarily krypton and xenon, which are not measured by the high-volume samplers or the AIRNET system. However, in sufficient concentrations these and other fission products would be detected by NEWNET. Consistent with this possibility, all NEWNET detectors recorded an increase of 0.2 {micro}R/h from March 19-1, followed by an additional increase of 0.1 {micro}R/h on March 24 (Figure 1). The consistency of the NEWNET stations is indicated by the error bars, which represent the standard error of the mean of the individual stations. Over the next 10 days, the NEWNET readings declined with approximately the 5-day half life of xenon-133, returning to near normal levels on April 2. After this, any further decrease was masked by high radon concentrations on April 3, by a weather system that moved into New Mexico on April 4, and by rainfall on April 6-9. Furthermore, it is likely that all NEWNET detectors responded to a gradually increasing trend in terrestrial radiation during the month of March as the ground dried out. It is difficult to distinguish the hypothetical effects of xenon-133 from the fluctuations of radon decay products. However, at present we do not have an alternative hypothesis for the sharp increase that was observed in all NEWNET stations from March 19-21. Perhaps some of the increase was caused by radon or terrestrial radiation, in which case the observed increase is an upper limit to that caused by releases from Fukushima. LANL data are consistent with those of the EPA RadNet monitoring system. The EPA has repeatedly stated that 'The levels detected are far below levels of concern.'

CESIUM 134↗

Description of the TCERT Vetting Reports for Data Release 25

The Q1Q17 DR25 TCERT Vetting Reports are a collection of plots and diagnostics used by the Threshold Crossing Event Review Team (TCERT) to evaluate threshold crossing events (TCEs). While designation of Kepler Objects of Interest (KOIs) and classification of them as Planet Candidates (PCs) or False Positives (FPs) is completely automated via a robotic vetting procedure (the Robovetter) for the Q1Q17 DR25 planet catalog, as described in Thompson et al. (2017), these reports help to visualize the metrics used by the Robovetter and evaluate those robotic decisions for individual objects. For each Q1Q17 DR25 TCE, these reports include the following products: (a) the DV one-page summary, (b) selected pertinent diagnostics and plots from the full DV report, and (c) additional plots and diagnostics not included in the full DV report, including an alternate means of data detrending.

Kepler Objects of Interest↗

Desktop Access to Full-Text NACA and NASA Reports: Systems Developed by NASA Langley Technical Library

NASA Langley Technical Library has been involved in developing systems for full-text information delivery of NACA/NASA technical reports since 1991. This paper will describe the two prototypes it has developed and the present production system configuration. The prototype systems are a NACA CD-ROM of thirty-three classic paper NACA reports and a network-based Full-text Electronic Reports Documents System (FEDS) constructed from both paper and electronic formats of NACA and NASA reports. The production system is the DigiDoc System (DIGItal Documents) presently being developed based on the experiences gained from the two prototypes. DigiDoc configuration integrates the on-line catalog database World Wide Web interface and PDF technology to provide a powerful and flexible search and retrieval system. It describes in detail significant achievements and lessons learned in terms of data conversion, storage technologies, full-text searching and retrieval, and image databases. The conclusions from the experiences of digitization and full- text access and future plans for DigiDoc system implementation are discussed.

Ambur, Manjula Y.↗

NASA PC software evaluation project

The USL NASA PC software evaluation project is intended to provide a structured framework for facilitating the development of quality NASA PC software products. The project will assist NASA PC development staff to understand the characteristics and functions of NASA PC software products. Based on the results of the project teams' evaluations and recommendations, users can judge the reliability, usability, acceptability, maintainability and customizability of all the PC software products. The objective here is to provide initial, high-level specifications and guidelines for NASA PC software evaluation. The primary tasks to be addressed in this project are as follows: to gain a strong understanding of what software evaluation entails and how to organize a structured software evaluation process; to define a structured methodology for conducting the software evaluation process; to develop a set of PC software evaluation criteria and evaluation rating scales; and to conduct PC software evaluations in accordance with the identified methodology. Communication Packages, Network System Software, Graphics Support Software, Environment Management Software, General Utilities. This report represents one of the 72 attachment reports to the University of Southwestern Louisiana's Final Report on NASA Grant NGT-19-010-900. Accordingly, appropriate care should be taken in using this report out of context of the full Final Report.

Dominick, Wayne D.↗

Planetary Protection Bioburden Analysis Program

This program is a Microsoft Access program that performed statistical analysis of the colony counts from assays performed on the Mars Science Laboratory (MSL) spacecraft to determine the bioburden density, 3-sigma biodensity, and the total bioburdens required for the MSL prelaunch reports. It also contains numerous tools that report the data in various ways to simplify the reports required. The program performs all the calculations directly in the MS Access program. Prior to this development, the data was exported to large Excel files that had to be cut and pasted to provide the desired results. The program contains a main menu and a number of submenus. Analyses can be performed by using either all the assays, or only the accountable assays that will be used in the final analysis. There are three options on the first menu: either calculate using (1) the old MER (Mars Exploration Rover) statistics, (2) the MSL statistics for all the assays, or This software implements penetration limit equations for common micrometeoroid and orbital debris (MMOD) shield configurations, windows, and thermal protection systems. Allowable MMOD risk is formulated in terms of the probability of penetration (PNP) of the spacecraft pressure hull. For calculating the risk, spacecraft geometry models, mission profiles, debris environment models, and penetration limit equations for installed shielding configurations are required. Risk assessment software such as NASA's BUMPERII is used to calculate mission PNP; however, they are unsuitable for use in shield design and preliminary analysis studies. The software defines a single equation for the design and performance evaluation of common MMOD shielding configurations, windows, and thermal protection systems, along with a description of their validity range and guidelines for their application. Recommendations are based on preliminary reviews of fundamental assumptions, and accuracy in predicting experimental impact test results. The software is programmed in Visual Basic for Applications for installation as a simple add-in for Microsoft Excel. The user is directed to a graphical user interface (GUI) that requires user inputs and provides solutions directly in Microsoft Excel workbooks. This work was done by Shannon Ryan of the USRA Lunar and Planetary Institute for Johnson Space Center. Further information is contained in a TSP (see page 1). MSC- 24582-1 Micrometeoroid and Orbital Debris (MMOD) Shield Ballistic Limit Analysis Program Lyndon B. Johnson Space Center, Houston, Texas Commercially, because it is so generic, Enigma can be used for almost any project that requires engineering visualization, model building, or animation. Models in Enigma can be exported to many other formats for use in other applications as well. Educationally, Enigma is being used to allow university students to visualize robotic algorithms in a simulation mode before using them with actual hardware. This work was done by David Shores and Sharon P. Goza of Johnson Space Center; Cheyenne McKeegan, Rick Easley, Janet Way, and Shonn Everett of MEI Technologies; Mark Manning of PTI; and Mark Guerra, Ray Kraesig, and William Leu of Tietronix Software, Inc. For further information, contact the JSC Innovation Partnerships Office at (281) 483-3809. MSC-24211-1 Spitzer Telemetry Processing System NASA's Jet Propulsion Laboratory, Pasadena, California The Spitzer Telemetry Processing System (SirtfTlmProc) was designed to address objectives of JPL's Multi-mission Image Processing Lab (MIPL) in processing spacecraft telemetry and distributing the resulting data to the science community. To minimize costs and maximize operability, the software design focused on automated error recovery, performance, and information management. The system processes telemetry from the Spitzer spacecraft and delivers Level 0 products to the Spitzer Science Center. SirtfTlmProc is a unique system with automated error notification and recovery, with a real-time continuous service that can go quiescent after periods of inactivity. The software can process 2 GB of telemetry and deliver Level 0 science products to the end user in four hours. It provides analysis tools so the operator can manage the system and troubleshoot problems. It automates telemetry processing in order to reduce staffing costs. This work was done by Alice Stanboli, Elmain M. Martinez, and James M. McAuley of Caltech for NASA's Jet Propulsion Laboratory. For more information, contact iaoffice @jpl.nasa.gov. This software is available for commercial licensing. Please contact Dan Broderick at Daniel.F. Broderick@jpl.nasa.gov. Refer to NPO-47803. NASA Tech Briefs, September 2013 29 This rapid response computer program predicts Orbiter Wing Leading Edge (WLE) damage caused by ice or foam impact during a Space Shuttle launch (Program "IMPACT2"). The program was developed after the Columbia accident in order to assess quickly WLE damage due to ice, foam, or metal impact (if any) during a Shuttle launch. IMPACT2 simulates an impact event in a few minutes for foam impactors, and in seconds for ice and metal impactors. The damage criterion is derived from results obtained from one sophisticated commercial program, which requires hours to carry out simulations of the same impact events. The program was designed to run much faster than the commercial program with prediction of projectile threshold velocities within 10 to 15% of commercial-program values. The mathematical model involves coupling of Orbiter wing normal modes of vibration to nonlinear or linear springmass models. IMPACT2 solves nonlinear or linear impact problems using classical normal modes of vibration of a target, and nonlinear/ linear time-domain equations for the projectile. Impact loads and stresses developed in the target are computed as functions of time. This model is novel because of its speed of execution. A typical model of foam, or other projectile characterized by material nonlinearities, impacting an RCC panel is executed in minutes instead of hours needed by the commercial programs. Target damage due to impact can be assessed quickly, provided that target vibration modes and allowable stress are known. This work was done by Robert Clark, Jr., Paul Cotter, and Constantine Michalopoulos of The Boeing Company for Johnson Space Center. For further information, contact the JSC Innovation Partnerships Office at (281) 483-3809. MSC-24988-1 Wing Leading Edge RCC Rapid Response Damage Prediction Tool (IMPACT2) Lyndon B. Johnson Space Center, Houston, Texas (3) the MSL statistics for only the accountable assays. Other options on the main menu include a data editing form and utility programs that produce various reports requested by the microbiologists and the project, and tools to generate the groupings for the final analyses. The analyses can be carried out in three ways: Each assay can be treated separately, the assays can be collectively treated for the whole zone as a group, or the assays can be collected in groups designated by the JPL Planetary Protection Manager. The latter approach was used to generate the final report because assays on the same equipment or similar equipment can be assumed to have been exposed to the same environment and cleaning. Thus, the statistics are improved by having a larger population, thereby reducing the standard deviation by the square root of N. For each method mentioned above, three reports are available. The first is a detailed report including all the data. This version was very useful in verifying the calculations. The second is a brief report that is similar to the full detailed report, but does not print out the data. The third is a grand total and summary report in which each assay requires only one line. For the first and second reports, most of the calculations are performed in the report section itself. For the third, all the calculations are performed directly in the query bound to the report. All the numerical results were verified by comparing them with Excel templates, then exporting the data from the Planetary Protection Analysis program to Excel.

Beaudet, Robert A.↗

Deep Image Prior Enabled Full Waveform Inversion (Final Technical Report)

MS Student Naveen Gupta worked on the problem of full waveform inversion (FWI) using neural networks as shown in Figure 1. Our goal was to learn a neural network to represent the subsurface velocity model, which when fed into the FWI module (implemented using a numerical forward model of wave equations) produces amplitude estimates that match with ground-truth observations of amplitude. We used neural networks to solve the inverse problem of estimating velocity distributions for a given seismic amplitude data such that, once trained, our neural network model can generate a distribution of velocity profiles for different random vectors fed as inputs to the neural network model.

97 MATHEMATICS AND COMPUTING↗