Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fuel recycle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Deuterium retention characteristics in Li film by coating and during flowing liquid Li limiter operation in experimental advanced superconducting tokamak

Lithium (Li) is a promising low-Z material for particle recycling and impurity control to improve plasma performance in fusion devices. In the experimental advanced superconducting tokamak (EAST), Li coating has become a routine method for wall conditioning, and a flowing liquid Li (FLiLi) limiter has been successfully tested several times. Deuterium retention characteristics in the Li film coated on the international thermonuclear experimental reactor-like tungsten divertor and FLiLi during plasma discharges, which is important for the utilization of Li in future fusion devices, were investigated in EAST. It is found that the absorption of the fuel particles by Li coatings decreases gradually, and recycling gradually increases over a series of discharges. The maximum net amount of deuterium retained reached ~0.8 g, corresponding to 12% deuterium in the Li. Furthermore, this corresponds to a whole day's worth of shots with a total of 87 plasma discharges and a total of ~640s plasma time after 11.75 g Li was deposited. Compared to the Li coating, it is shown that FLiLi continuously traps fuel particles and achieves a higher deuterium retention ratio over both the short- and long-term, leading to lower recycling. Meanwhile, it is also observed that the fuel particle retention ratio increases when FLiLi is closer to the plasma. This result is likely due to higher plasma heating power and limiter temperature, which cause an increased Li efflux from FLiLi due to a higher limiter temperature, which then redeposits on the other plasma-facing surfaces and increases fuel particle absorption. It is estimated that ≥ 80% of the retained D particles are captured by the continual renewal of the Li redeposition film during the FLiLi operation. This investigation would also be useful for D/T retention in future fusion devices if Li is used as a plasma-facing component.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Innovative Separations Research and Development Needs for Advanced Fuel Cycles

Deployment of advanced nuclear reactors will inevitably introduce new challenges for devising and implementing an efficient, safe, and economical nuclear fuel cycle that meets society’s need for clean energy and expectations for environmental stewardship. The growing urgency for decarbonizing the US and global economies makes such technological challenges all the more compelling. The Office of Materials and Chemical Technologies within US Department of Energy’s Office of Nuclear Energy stewards the capabilities and knowledge relied upon by government policy makers to make informed decisions regarding nuclear fuel cycle options. Such decisions in turn rely on the development of efficient and economical separation methods that can accept the used nuclear fuel containing actinides and fission products (FPs) to recycle selected actinides, recover valuable by-products, and deliver waste streams that are suitable for disposal. To help guide the future direction of fuel cycle separations research, taking into account emerging technologies, the Office of Materials and Chemical Technologies sponsored the Innovative Separations R&D Needs for Advanced Fuel Cycles workshop, held virtually August 30–September 1, 2021. Based upon 60 contributed white papers, 6 plenary lectures, and 3 days of discussions, the outcome of the workshop and subsequent deliberations was the generation of this report identifying seven future research directions (FRDs) plus three crosscutting areas of research.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Progress Towards Microcalorimeter Gamma Spectroscopy Analysis for Nuclear Fuel Separations

The High Efficiency and Resolution Microcalorimeter Spectrometer, 400 pixels (HERMES-400) is an ultra-high resolution gamma-ray spectrometer at Idaho National Laboratory’s Materials and Fuels Complex. HERMES-400 is intended to enable precise nondestructive analysis of advanced fuel cycle materials. Key upgrades and repairs of the instrument were performed this year to improve performance. First, the fourth and final microcalorimeter detector module was installed, meeting the milestone for its integration into the system. Operation with all four modules enables higher detector efficiency than any previous microcalorimeter gamma-ray system. Second, a thinner magnetic shield was installed. This shields the sensitive microcalorimeter pixels from stray magnetic fields while allowing transmission of lower-energy gamma rays, which are important to isotopic analysis. Finally, the cryostat, which provides cooling of the modules to their operating temperature, was found to have a helium coolant leak, which was repaired. HERMES-400 is in a stable state to perform repeated, long-term gamma-ray measurements with good detector efficiency and energy resolution. In FY25, irradiated TRISO fuel and salts from advanced electrochemical recycling techniques are candidates for microcalorimeter measurements. A final upgrade of the magnetic shielding and vibration damping of the system is also planned to maximize the system performance.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1998

NO(x) Concentrations in the Upper Troposphere as a Result of Lightning

Upper tropospheric NO(x) controls, in part, the distribution of ozone in this greenhouse-sensitive region of the atmosphere. Many factors control NO(x) in this region. As a result it is difficult to assess uncertainties in anthropogenic perturbations to NO from aircraft, for example, without understanding the role of the other major NO(x) sources in the upper troposphere. These include in situ sources (lightning, aircraft), convection from the surface (biomass burning, fossil fuels, soils), stratospheric intrusions, and photochemical recycling from HNO3. This work examines the separate contribution to upper tropospheric "primary" NO(x) from each source category and uses two different chemical transport models (CTMS) to represent a range of possible atmospheric transport. Because aircraft emissions are tied to particular pressure altitudes, it is important to understand whether those emissions are placed in the model stratosphere or troposphere and to assess whether the models can adequately differentiate stratospheric air from tropospheric air. We examine these issues by defining a point-by-point "tracer tropopause" in order to differentiate stratosphere from troposphere in terms of NO(x) perturbations. Both models predict similar zonal average peak enhancements of primary NO(x) due to aircraft (approx. = 10-20 parts per trillion by volume (pptv) in both January and July); however, the placement of this peak is primarily in a region of large stratospheric influence in one model and centered near the level evaluated as the tracer tropopause in the second. Below the tracer tropopause, both models show negligible NO(x) derived directly from the stratospheric source. Also, they predict a typically low background of 1 - 20 pptv NO(x) when tropospheric HNO3 is constrained to be 100 pptv of HNO3. The two models calculate large differences in the total background NO(x) (defined as the source of NO(x) from lightning + stratosphere + surface + HNO3) when using identical loss frequencies for NO(x). This difference is primarily due to differing treatments of vertical transport. An improved diagnosis of this transport that is relevant to NO(x) requires either measurements of a surface-based tracer with a substantially shorter lifetime than Rn-222 or diagnosis and mapping of tracer correlations with different source signatures. Because of differences in transport by the two models we cannot constrain the source of NO(x) from lightning through comparison of average model concentrations with observations of NO(x).

Penner, Joyce E.↗
NASA NTRS2019

The Role of Advanced Materials and Manufacturing in Future NASA Exploration Missions

Future NASA missions to the Moon and Mars will require significant advances in materials and manufacturing technologies. These missions will likely be constrained in mass and volume. Lightweight, high strength materials will be required to reduce the mass of launch vehicles and spacecraft in order to maximize the amount of supplies and equipment that can be transported to the surface of the planet. Additive manufacturing and advanced in-space assembly methods will be needed to fabricate spare parts and build habitats for the astronauts. Methods to convert resources on the planet and recycle waste into materials, parts, and fuel will also be required. This presentation will discuss some of these needs, potential solutions currently being explored, and research opportunities for students, faculty, and researchers from industry and government to help address these needs.

chemistry↗
NASA NTRSDate not supplied

Numerical analysis of Microgravity Bubble Separation in Open Channels with ISS Bemchmarks

Spacecraft fluid systems often require specific considerations to operate in a manner similar to those on Earth. For instance, an open wedge shaped channel can serve as a pathway for passively separating bubbles from a liquid in a two phase flow, analogous to buoyancy effects on Earth. As the bubbles merge within the channel, they become increasingly confined in the wedge, driving them upwards and outwards toward the free surface due to capillary forces. These same forces ensure coalescence and allow the bubbles to escape through the free surface. However, in low gravity environments, a challenge arises when bubbles are not sufficiently large. Under such conditions, the bubbles tend to follow trajectories near their inscribed elevations, never fully leaving the liquid. Such unseparated bubbles can lead to downstream pump failure, cavitation, flow instabilities, dryout, and other adverse effects aboard spacecraft. Understanding and exploiting the underlying mechanisms behind this behavior is crucial for enhancing the reliability of passive capillary fluids management in space applications, including cryogenic and storable fuels transport, thermal fluids circulation, water recycling for life support, plant watering systems, and more. The joint German Aerospace Center (DLR) and NASA Capillary Channel Flow (CCF) experiment conducted on the International Space Station has provided an extensive publicly available database documenting such phenomena (https://science.nasa.gov/physical sciences informatics psi). Leveraging this resource, we aim to establish benchmarks for our numerical investigation of zero gravity bubbly two phase flow in open wedge channels. Specifically, we seek to quantitatively understand the mechanisms governing ‘inscribed’ bubble motion, considering the apparent interplay of two competing forces: Saffman lift (causing upward/outward motion) and the Magnus effect (causing downward/inward motion). Our cross cutting findings directly inform the development of robust passive phase separation methods within spacecraft plumbing systems.

bubble↗
DOE OSTI2024

Shielding an Infrasound Sensor for INL’s Fuel Conditioning Facility

Idaho National Laboratory (INL) has been pyroprocessing spent fuel from the Experimental Breeder Reactor II (EBR-II). This process occurs in the Fuel Conditioning Facility (FCF) which houses the treatment of DOE-owned sodium-bonded metal fuel. The electrometallurgical methods used in FCF treat the spent fuel from EBR-II for recycling of the uranium. The radiation field present inside FCF throughout the pyroprocessing stages affects any electronic sensors and devices that may be used for research. An example of such device is a seismoacoustic sensor which detects sound and vibration waves from the equipment in the facility. Seismoacoustic sensors are of interest to research nonproliferation techniques.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗
DOE OSTI2021

Product Characteristics and Synergy Study on Supercritical Methanol Liquefaction of Lignocellulosic Biomass and Plastic

Bio-oil originating from lignocellulosic biomass (LCB) is a potential next-generation fuel because of its abundant, renewable, and sustainable resources compared to other types. However, these bio-oils are typically of low quality compared to petroleum-derived oils due to their low calorific value, high acidity, and oxygen content. This work intends to provide a feasible method for producing hydrocarbon-rich oils by supercritical methanol (scMeOH) coliquefaction of LCB and plastic waste. Both rice straw (RS) and linear low-density polyethylene (LLDPE) are coliquefied under 300 °C for 60 min in scMeOH at various RS/LLDPE mass ratios of 2:1, 1:1, and 1:2. Positive effects were found in terms of oil yield and fuel quality, such as higher hydrocarbons content and calorific value. The oil yield increased from 26.72 to 30.07 wt % with LLDPE addition of 67%. Around 79.15–92.24% of the oil was hydrocarbons, phenols, ketones, and diverse functional group compounds. The complex compounds led to various degrees of the synergetic effect on oil chemical compositions. Among various RS/LLDPE ratios in this work, RS/LLDPE of 1:2 was supposed to be an optimal ratio for hydrocarbon-rich fuel production because it presented the highest oil yield of 30.07 wt % and quality-high oil with 71.42% hydrocarbons. In addition, scMeOH coliquefaction of LCB and plastic waste shows a synergetic effect on the improvement of carbon and hydrogen contents in solid products. These results indicate that scMeOH coliquefaction of LCB with plastic is a feasible and promising means to improve fuel quality and also to realize the thermal recycling of plastic wastes.

09 BIOMASS FUELS↗
DOE OSTI2024

Unraveling the Pyrolytic Behavior and Kinetics of Single Polymers and Plastic-Rich Municipal Solid Waste Using Thermal Analysis

Pyrolysis is a highly promising thermochemical recycling technology for converting heterogenous plastic waste into sustainable fuels in a single step. Therefore, understanding the pyrolysis mechanism is essential for enabling rational reactor design and enhancing efficient recycling techniques. In this study, the thermal degradation behaviors and corresponding kinetics of pure polymers (PE, PP, and PET) and plastic-rich MSW were examined using simultaneous thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Experiments were carried out in the temperature range of 30-800°C with variable heating rates from 5°C/min to 20°C/min in an ultra-high purity Argon atmosphere. Our results indicated that the plastic pyrolysis was an endothermic process, with varying decomposition temperature ranges depending on their structure and composition. Various iso-conversional model-free methods (Friedman, Flynn-Wall-Ozawa, Starink, and Kissinger-Akahira-Sunose) were utilized to determine the apparent activation energy of the plastic degradation, which increased in the following order: PET (214 kJ/mol), PP (218 kJ/mol), PE (245 kJ/mol), and MSW (249 kJ/mol). Finally, Criado’s master plots were employed to identify the best-fitting reaction model and the pre-exponential factor was subsequently determined.

Bashir, Muhammad Aamir↗
DOE OSTI2020

Electrochemical conversion of carbon dioxide into chemicals and fuels

CO 2 electrolysis could provide a route to recycle waste CO 2 back to useful carbon-based products that are the basis of today’s economy. Opus 12 worked together with LBNL staff to further develop their CO 2 conversion electrolyzer. Improvements were made to catalyst testing throughput and long-term testing up to 1000h. A basic techno-economic model was constructed to estimate the product cost of CO 2 -derived compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Process and Applications Development for Recycled Mixed-Stream Composites

The goal of this IACMI Phase II Technical Collaboration Project was to establish the viability of producing affordable, recycled composite parts, which were produced from fibers with the properties in the range of those reclaimed through the controlled pyrolysis technology demonstrated in Phase I [1]. For the purpose of this report, we use the terms “recovered carbon fiber” (rCF) and “recovered glass fiber” (rGF) as the material reclaimed from controlled pyrolysis. This fiber recycling technology utilizes the inherent energy in composites for fuel and preserves the structural value of glass fiber (GF) and carbon fiber (CF) for reuse. It can also be used for recycling other waste streams at the same facility, thus spreading capital risk and recovery across multiple industries and achieving economy of scale. A second goal to be addressed was the viability of using recycled fibers as reinforcing materials in additive manufacturing applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Process and Applications Development for Recycled Mixed-Stream Composites

The goal of this IACMI Phase II Technical Collaboration Project was to establish the viability of producing affordable, recycled composite parts, which were produced from fibers with the properties in the range of those reclaimed through the controlled pyrolysis technology demonstrated in Phase I. For the purpose of this report, we use the terms “recovered carbon fiber” (rCF) and “recovered glass fiber” (rGF) as the material reclaimed from controlled pyrolysis. This fiber recycling technology utilizes the inherent energy in composites for fuel and preserves the structural value of glass fiber (GF) and carbon fiber (CF) for reuse. It can also be used for recycling other waste streams at the same facility, thus spreading capital risk and recovery across multiple industries and achieving economy of scale. A second goal to be addressed was the viability of using recycled fibers as reinforcing materials in additive manufacturing applications.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRSDate not supplied

Should Oxygen, Hydrogen, and Water on the Moon Be Provided by Earth Supply, Life Support Recycling, or Regolith Mining?

The water needed for space life support has so far been provided by either direct supply from Earth on most missions or by life support wastewater recycling on the International Space Station (ISS). With the recent large reduction in launch cost, Earth resupply has become more attractive, but recycling always costs less than resupply for a large enough crew on a long enough mission. Water is also needed to make up recycling losses and oxygen and hydrogen are needed for propulsion fuel. This paper compares the costs of oxygen, hydrogen, and water on the moon for Earth supply, lunar recycling, and lunar mining. While Earth supply is the most expensive by far, lunar recycling and mining costs are not much different. Life support wastewater provides a large but limited supply, so lunar mining will always be needed. Minor cost reductions may make mining less expensive than recycling.

Harry W Jones↗
DOE OSTI2024

Plastic Parallel Pathways Platform - 4P Model

Global momentum is building towards a circular economy capable of keeping plastics in use and out of waste streams. Given that 79% of all plastic produced since 1950 has accumulated in landfills or the natural environment,rapid implementation of various end-of-life (EoL) management technologies will be needed to reach this target. However, it can be challenging to develop an effective plastic EoL strategy when the available options - chemical or molecular recycling, energy recovery, upcycling, downcycling, closed-loop (plastic-to-plastic) or open-loop (plastic-to-x) recycling, among others - can generate products ranging from low-grade to virgin-quality plastic and from fuels to value-added chemicals. We present a flexible material flow model capable of analyzing the effects of both plastic-to-plastic and plastic-to-x EoL management strategies on the U.S. PET economy. This Plastic Parallel Pathways Platform (4P) assesses the environmental impacts, costs, and circularity of a PET system in which waste is managed through six potential EoL pathways: landfill, incineration with energy recovery, pyrolysis to fuel oil, upcycling to glass fiber reinforced plastic (GFRP), mechanical recycling to low-grade PET, and chemical recycling (glycolysis) to bottle-grade PET. We compare the pathways across multiple metrics using multi-criteria decision analysis (MCDA) and then use a brute force algorithm to predict an optimal combination of EoL pathways to minimize greenhouse gas (GHG) emissions and costs and maximize circularity. This work highlights the need to implement a diverse portfolio of EoL strategies in parallel to enable a PET economy that meets environmental, economic, and circularity requirements simultaneously.

downcycling↗
DOE OSTI2026

Cradle-to-gate life cycle assessment of advanced composite panels incorporating CO 2 -derived multi-walled carbon nanotubes and hemp fiber for sustainable building applications

Advanced composite panels represent a promising pathway to reducing carbon emissions in the construction industry, yet comprehensive environmental impact assessments remain limited. Here, in this study, we conduct a life cycle assessment (LCA) to evaluate the environmental impacts of innovative composite panels produced from multi-walled carbon nanotubes (MWCNTs), hemp fiber (HF), recycled carbon fiber (rCF), and recycled polypropylene (PP), exploring their potential as baseline structural equivalents to conventional gypsum board. MWCNTs and HF play a critical role in sequestering carbon during raw material production, while the recycling processes for CF and PP generally require less energy compared to virgin material production. The LCA evaluates environmental performance using the TRACI 2.1 method, covering global warming potential (GWP), ozone depletion, smog formation, acidification, eutrophication, carcinogenic and non-carcinogenic effects, respiratory impacts, ecotoxicity, and fossil fuel depletion. Compositional variations—resin type (virgin vs. recycled), rCF content (9–29 wt%), and HF content (10–30 wt%)—are introduced for sensitivity and hotspot analyses. Results demonstrate that, when compared on the basis of preliminary structural equivalence, increasing recycled PP, rCF, and HF content can significantly reduce global warming potential compared to gypsum board. Beyond carbon reduction, the composite panels show trade-offs across other environmental categories. With the growing demand for composite materials in interior panels, ceiling systems, and exterior claddings, these findings highlight the environmental benefits and potential trade-offs of the proposed composites, establishing a foundational framework to support their continued development toward full building-system integration.

Advanced composite manufacturing↗
DOE OSTI2022

Design optimization of integrated cooling inserts in modular Fischer-Tropsch reactors

Sustainable production of liquid fuels and feedstocks from atmospheric CO 2 through carbon recycling technologies is necessary to broaden decarbonization efforts and further reduce global emissions. Fischer–Tropsch (FT) reactors can address this challenge by providing storable, high-value liquid hydrocarbon fuels and feedstocks from syngas generated through reductive CO 2 utilization. FT technology, however, is most cost effective at large-scale, fixed-site plants and does not effectively address the smaller, globally distributed CO 2 point sources. Alternatively, smaller, modular reactors can be composed together to the specific scale of the emission source, yielding a flexible solution that enables more widespread deployment. In these modular reactors, thermal management using a finned cooling insert embedded within the catalyst matrix is critical to maintaining the performance and viability. Thus, in this work, topology optimization is used to determine the cooling insert geometry that maximizes reactor productivity while preventing auto-thermal runaway. Optimal designs are generated for varying number of constituent fins and over a range of maximum operating temperatures. Constraints including minimum feature length-scales and prescribed cooling insert material are imposed on the designs to enhance manufacturability. The impact of design features such as insert tapering and increased length scale hierarchy is automatically revealed by the systematic design framework employed. Here, this approach thus generates novel optimal geometries while automating, accelerating, and enhancing the design process compared to traditional heuristic approaches for cooling insert design in modular FT reactors.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Dioctyl ether radiolysis under used nuclear fuel reprocessing conditions: Foundational knowledge for the development of sacrificial ligand grafts

Radiation-induced ligand destruction and concomitant degradation product formation is unavoidable under envisioned used nuclear fuel reprocessing conditions, and ultimately limits the recyclability of a given solvent system formulation. With this in mind, a novel approach to ligand innovation for advanced separations processes is in the design of tailored “protomolecules,” which when exposed to ionizing radiation undergo desired chemical transformations, thereby allowing for a reprocessing solvent system to advantageously evolve with absorbed radiation dose. Here we provide foundational knowledge for the time-resolved (electron pulse) and steady-state (cobalt-60 gamma) radiolytic behavior of dioctyl ether, a protomolecule grafting surrogate. Gamma irradiation of single-phase solutions of dioctyl ether (5–100 vol.%) in n-dodecane resulted in the loss of dioctyl ether (G = -0.72 µmol J –1 ) and the formation of octane (G = 0.11 µmol J –1 ) and octanol (G = 0.15 µmol J –1 ) degradation products, the latter of which is a known reprocessing phase modifier and radioprotectant. Further, these radiation-induced changes were attributed to direct radiation effects, for more concentrated dioctyl ether solutions, and indirect radiation effects, predominantly driven by the reaction of dioctyl ether with the dodecane radical cation, for which we report a second-order rate coefficient of k = (1.53 ± 0.05) × 10 10 L mol –1 s –1 . Under typical biphasic extraction (4.0 mol L –1 HNO 3 ) and strip (0.1 mol L –1 HNO 3 ) reprocessing conditions, gamma irradiation of 5 vol.% dioctyl ether solvent systems afforded negligible change in the rate of parent molecule destruction but promoted significant differences in the radiolytic behavior of its degradation products. These differences are attributed to their respective interactions with [dioctyl ether/HNO 3 /H 2 O] and [octanol/HNO 3 /H 2 O] adducts extracted into the organic phase. Overall, these results support the grafting of ether linkages to advanced separations ligands (e.g., modified diglycolamides).

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Decontamination Strategies to Increase Fuel and Product Conversion Yields of Municipal Solid Waste

Since the implementation of China’s Green Fence and National Sword policies, many areas lost a market for heavily contaminated municipal solid waste (MSW). Approximately 17.2 million tons of paper and 26.9 million tons of plastic were landfilled in the United States in 2018. This non-recyclable waste that would normally be landfilled can be converted into fuels and chemicals, but common contaminants that are present in non-recyclable waste can negatively affect low and high-temperature conversion yields. In addition, MSW is a heterogeneous feedstock whose composition can vary widely across geographical areas and socio-economic statuses. This presents a unique challenge for providing a consistent feedstock to biorefineries around the world. Techniques that are commonly used in other industries, in addition to pre-processing methods used for traditional biomass, can be used to increase conversion yields. Drawing on established techniques, as well as experimental decontamination strategies, non-recyclable MSW could represent a viable alternative to agricultural residues for biofuel production. Although many of the techniques explored in this chapter have been used extensively in other industries, the feedstock composition needs to be carefully considered when choosing prospective decontamination methods. It is likely that there is not a “one-size-fits-all” decontamination method for MSW. In conclusion, a pre-processing and decontamination plan will rely heavily on the composition of the individual waste stream.

09 BIOMASS FUELS↗