Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “favorability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Fade margin calculation for channels impaired by Rician fading

Excess path loss due to multipath severely restricts the performance of power limited mobile networks such as those using satellite-aided links. To reduce multipath related losses, the higher elevation angle of the spacecraft can be exploited by utilizing mobile antennas which reduce the strength of the multipath reflections in favor of the line-of-sight signal. The presence of a strong and stable path in a fading link will change the envelope statistics of the received waveform from Rayleigh to a more favorable Rician distribution. It is determined that the excess path loss, or fade margin, of a Rician channel when coherent detection of binary phase shift keying (BPSK) or quaternary phase shift keying (QPSK) signals is considered. The results are presented parametrically such that they can be applied to a wide range of propagation characteristics from heavy fading to nonfading situations. Furthermore, similar results are also given for the case where only limited coverage is provided.

Davarian, F.↗
NASA NTRS1985

Effects of empennage surface location on aerodynamic characteristics of a twin-engine afterbody model with nonaxisymmetric nozzles

An investigation has been conducted in the Langley 16-Foot Transonic Tunnel to determine the effects of empennage surface location and vertical tail cant angle on the aft-end aerodynamic characteristics of a twin-engine fighter-type configuration. The configuration featured two-dimensional convergent-divergent nozzles and twin-vertical tails. The investigation was conducted with different empennage locations that included two horizontal and three vertical tail positions. Vertical tail cant angle was varied from -10 deg to 20 deg for one selected configuration. Tests were conducted at Mach number 0.60 to 1.20 and at angles of attack -3 to 9 deg. Nozzle pressure ratio was varied from jet off to approximately 9, depending upon Mach number. Tail interference effects were present throughout the range of Mach numbers tested and found to be either favorable or adverse, depending upon test condition and model configuration. At a Mach number of 0.90, adverse interference effects accounted for a significant percentage of total aft-end drag. Interference effects on the nozzle were generally favorable but became adverse as the horizontal tails were moved from a mid to an aft position. The configuration with nonaxisymmetric nozzles had lower total aft-end drag with tails-off than a similar configuration with axisymmetric nozzles at Mach numbers of 0.60 and 0.90.

Capone, Francis J.↗
NASA NTRS1987

Traditional versus rule-based programming techniques: Application to the control of optional flight information

To the software design community, the concern over the costs associated with a program's execution time and implementation is great. It is always desirable, and sometimes imperative, that the proper programming technique is chosen which minimizes all costs for a given application or type of application. A study is described that compared cost-related factors associated with traditional programming techniques to rule-based programming techniques for a specific application. The results of this study favored the traditional approach regarding execution efficiency, but favored the rule-based approach regarding programmer productivity (implementation ease). Although this study examined a specific application, the results should be widely applicable.

Ricks, Wendell R.↗
NASA NTRS1986

Moon origin - The impact-trigger hypothesis

Arguments in favor of the impact-trigger model of lunar origin are presented. Lunar properties favoring this hypothesis include: (1) lunar iron and volatile deficiency; (2) angular momentum of the earth-moon system; and (3) similar O isotopes, bulk iron contents, and densities of earth's mantle and the moon. It is shown that the intense early bombardment averaged during earth's formation was several billion times the present meteoritic mass flux, consistent with a giant impact.

Hartmann, William K.↗
NASA NTRS1987

Feedback between ice flow, barotropic flow, and baroclinic flow in the presence of bottom topography

Coupling between externally driven barotropic flow and locally driven baroclinic flow in the presence of an ice cover and topography is studied. The topography is a necessary ingredient in this coupling. This study shows that the observed mesoscale activity of the ice edge seen in satellite imagery does not necessarily reflect the mesoscale baroclinic activity in the ocean. Besides oceanic eddies, the ice cover can trace the topographic changes via the coupling to the barotropic flow. A two-layer ocean model coupled to an ice model is constructed to simulate an ice-ocean system with a varying bottom topography. In the absence of wind, forcing the ice cover reflects the externally driven barotropic ocean response, especially topographically forced Taylor columns by forming ice streamers or meanders. Some of these features propagate (advected with the ocean currents) as a whole downstream, creating an image of eddy propagation even though there is no baroclinic structure underneath. When downwelling favorable winds (ice on the left from the wind direction) are turned on, in addition to this background barotropic flow, the Ekman flow in the ocean (toward the open ocean) will enhance the meandering of the ice edge due to the barotropic flow. During upwelling favorable winds, the ice edge stays rather compact, including the case when a strong baroclinic, cyclonic vortex is developing beneath an ice meander supported by the Taylor column in the ocean.

Hakkinen, Sirpa↗
NASA NTRS1986

Computational design of natural laminar flow wings for transonic transport application

Two research programs are described which directly relate to the application of natural laminar flow (NLF) technology to transonic transport-type wind planforms. Each involved using state-of-the-art computational methods to design three-dimensional wing contours which generate significant runs of favorable pressure gradients. The first program supported the Variable Sweep Transition Flight Experiment and involves design of a full-span glove which extends from the leading edge to the spoiler hinge line on the upper surface of an F-14 outer wing panel. Boundary-layer and static-pressure data will be measured on this design during the supporting wind-tunnel and flight tests. These data will then be analyzed and used to infer the relationship between crossflow and Tollmein-Schlichting disturbances on laminar boundary-layer transition. A wing was designed computationally for a corporate transport aircraft in the second program. The resulting wing design generated favorable pressure gradients from the leading edge aft to the mid-chord on both upper and lower surfaces at the cruise design point. Detailed descriptions of the computational design approach are presented along with the various constraints imposed on each of the designs. Wing surface pressure distributions, which support the design objective and were derived from transonic three-dimensional analyses codes, are also presented. Current status of each of the research programs is included in the summary.

Waggoner, Edgar G.↗
NASA NTRS1986

Computational wing design studies relating to natural laminar flow

Two research studies are described which directly relate to the application of natural laminar flow (NLF) technology to transonic transport-type wing planforms. Each involved using state-of-the-art computational methods to design three-dimensional wing contours which generate significant runs of favorable pressure gradients. The first study supported the Variable Sweep Transition Flight Experiment and involves design of a full-span glove which extends from the leading edge to the spoiler hinge line on the upper surface of an F-14 outer wing panel. A wing was designed computationally for a corporate transport aircraft in the second study. The resulting wing design generated favorable pressure gradients from the leading edge aft to the mid-chord on both upper and lower surfaces at the cruise design point. Detailed descriptions of the computational design approach are presented along with the various constraints imposed on each of the designs.

Waggoner, Edgar G.↗
NASA NTRS1988

Theory of centrifugally driven magnetospheric diffusion

A general model of centrifugally driven diffusion is formulated that incorporates the effects of the pressure gradient of a radiation belt ion population and includes a realistic precipitation loss rate of the radiation belt ions that takes on a spatially peaked form, leading to a spatially varying ionospheric conductivity. The model is applied specifically to Jupiter. Model solutions for the flux tube content of the radiation belt ion population are found to compare favorably with reported Voyager 1 observations of ions in the energy range 0.2-30 MeV. Solution profiles for the flux-tube content of the cool Iogenic ion population typically favor a gradient near L = 7.5 of between one-half and one-third of the value originally reported by Bagenal and Sullivan (1981) and Siscoe et al. (1981). The model solutions are characterized by unexpectedly low values of the precipitation parameter.

Summers, Danny↗
NASA NTRS1989

Laser/Plasma/Chemical-Vapor Deposition Of Diamond

Proposed process for deposition of diamond films includes combination of plasma induced in hydrocarbon feed gas by microwave radiation and irradiation of plasma and substrate by lasers. Deposition of graphite suppressed. Reaction chamber irradiated at wavelength favoring polymerization of CH2 radical into powders filtered out of gas. CH3 radicals, having desired sp3 configuration, remains in gas to serve as precursors for deposition. Feed gas selected to favor formation of CH3 radicals; candidates include CH4, C2H4, C2H2, and C2H6. Plasma produced by applying sufficient power at frequency of 2.45 GHz and adjusting density of gas to obtain electron kinetic energies around 100 eV in low-pressure, low-temperature regime.

Hsu, George C.↗
NASA NTRS1988

Simulation of GaAs cluster formation on GaAs(00-1), AlAs(00-1), Si(001), and As1/Si(001) surfaces

Recently developed semiempirical potential energy functions for the Ga-As-Si and Ga-As-Al systems have been applied here to determine the excess formation energy for GaAs clusters on GaAs(00-1), AlAs(00-1), Si(001), and one atomic layer As-covered Si(001) substrates as a function of cluster size and cluster shape by the Monte Carlo technique. Pyramidal type ledges on the GaAs clusters are found to be the favored ledge for the first three layers while an inverted-pyramidal type ledge is also favored in certain cases for the As1/Si(001) substrate. Cluster formation at ledges is compared with cluster formation on a flat terrace for the Si(001) and the As1/Si(001) substrates.

Choi, D. K.↗
NASA NTRS1988

Effects of compressibility on design of subsonic fuselages for natural laminar flow

Compressible linear boundary-layer stability analyses of two representative axisymmetric fuselage geometries indicate that a favorable effect will be exerted on the characteristics of a fuselage's axisymmetric boundary layer by compressibility. A freestream Mach number increase from 0.6 to 0.8 significantly reduces TS wave growth rates in the laminar boundary layer of the fuselages analyzed. The generally destabilizing effect of increasing length Re number on boundary layer stability can be overpowered by the favorable effects of compressibility on the fluid.

Vijgen, P. M. H. W.↗
NASA NTRS1988

Numerical simulation of mass injection for the formation of prominence magnetic field configurations. II - Symmetric injection

A two-dimensional MHD model simulating the formation of Kippenhahn-Schluter (1957) quiescent prominence (QP) magnetic field configurations is used to explore symmetric mass injection into a dipole magnetic field. An optimum magnetic field strength for QP formation by mass injection is obtained. It is found that a weaker magnetic field strength is more favorable for the condensation of the injected plasma but that a stronger field is more favorable for supporting the condensed plasma against gravity.

An, C.-H.↗
NASA NTRS1989

Estimation of the two-dimensional ocean current shear field with a synthetic aperture radar

A double inverse method to convert SAR data to estimates of current shear was developed theoretically. Problems of applying the technique to real SAR data were examined. The first step of the inversion process involved elimination of noise in the (x-vector, k-vector) wave spectra deduced from SAR images. The second step, estimation of current shear, required the existence of well defined swell and a favorable single of interaction between swell and ocean current. Application of the method in the Antarctic circumpolar current encountered sea conditions that both satisfied and violated these requirements. Where the wave-current geometry was favorable, realistic surface current velocity fields were obtained, suggesting the presence of a substantial mesoscale eddy. Another attempt to apply the method in the Gulf Stream produced wave spectral estimates that showed no clear peak and hence produced no current estimates.

Barnett, Tim P.↗
NASA NTRS1989

The origin of polynucleotide-directed protein synthesis

If protein synthesis evolved in an RNA world it was probably preceded by simpler processes by means of which interaction with amino acids conferred selective advantage on replicating RNA molecules. It is suggested that at first the simple attachment of amino acids to the 2'(3') termini of RNA templates favored initiation of replication at the end of the template rather than at internal positions. The second stage in the evolution of protein synthesis would probably have been the association of pairs of charged RNA adaptors in such a way as to favor noncoded formation of peptides. Only after this process had become efficient could coded synthesis have begun.

Orgel, Leslie E.↗
NASA NTRS1989

Solar nebula chemistry - Implications for volatiles in the solar system

Current theoretical models of solar nebula chemistry which take into account the interplay between chemistry and dynamics are presented for the abundant reactive volatile elements including hydrogen, carbon, nitrogen, oxygen, and sulfur. Results of these models indicate that, in the solar nebula, the dominant carbon and nitrogen gases were CO and NO, whereas, in giant planet subnebulae, the dominant carbon and nitrogen gases were CH4 and NH3; in the solar nebula, the Fe metal grains catalyzed the formation of organic compounds from CO and H2 via the Fischer-Tropsch-type reaction. It was also found that, in solar nebula, bulk FeS formation was kinetically favorable, while FeO incorporation into silicates and bulk Fe3O4 formation were kinetically inhibited. Furthermore, clathrate formation was kinetically inhibited in the solar nebula, while it was kinetically favorable in giant planet subnebulae.

Fegley, Bruce, Jr.↗
NASA NTRS1990

Supersonic aircraft drag reduction

This paper reviews aerodynamic drag reduction for friction, wave and vortex drag associated with supersonic cruise aircraft and suggests approaches and research directions. Suction laminar flow control may also enable improved low-speed, high-lift systems, improved lift-to-drag ratio for subsonic cruise, reduced parasitic viscous drag for favorable interference wave drag reduction approaches, and turbulent skin friction reduction via slot injection. Flow separation control at cruise proffers opportunities for increased leading-edge thrust, increased lift increment from upper surface, increased fuselage lift/camber for wave drag-due-to-lift reduction, improved performance of various favorable interference wave drag reduction schemes, as well as possibly better low-speed, high-lift systems and wing cruise performance.

Bushnell, D. M.↗
NASA NTRS1990

Origin of low frequency (intraseasonal) oscillations in the tropical atmosphere. III - Monsoon dynamics

The issue of the interaction of the monsoon large-scale circulation and intraseasonal oscillations is addressed, showing that, as a result of the interaction of the large scale monsoon flow with the near-equatorial intraseasonal oscillation, unstable baroclinic disturbances are generated over the monsoon region. From a linear stability analysis of quasi-geostrophic motion in a two-level model, it is shown that the westward propagating disturbances generated over the monsoon region are the manifestation of heat-induced unstable Rossby waves. The instability is favored in the region with large vertical wind shear and reduced effective static stability. The monsoon large scale circulation over India and southeast Asia and the plentiful supply of moisture in the region appear to be favorable for the development of these unstable waves.

Lau, K.-M.↗
NASA NTRS1988

Theoretical evaluation of engine auxiliary inlet design for supersonic V/STOL aircraft

A higher order panel method is used to evaluate the potential flow of a two dimensional supersonic V/STOL inlet. A non-symmetric analytical inlet model is developed to closely match a wind tunnel model. The analytical inlet is analyzed for flow characteristics around the lower cowl lip and auxiliary inlets. The results are obtained from the output of a computer program that is based on the Hess Panel Method which determines source strengths of panels distributed over a three dimensional body. The analytical model was designed for the implementation of drooped/translated cowl lip and auxiliary inlets as flow improvement concepts. A 40 or 70 degree droop lip can be incorporated on the inlet to determine if these geometry modifications result in flow improvements which may reduce the propensity for flow separation on the interior portion of the lip. Auxiliary inlets are employed to decrease the mass flow over the inlet lip. Thus, the peak flow velocity is reduced at the lip which also lessens the likelihood of flow separation on the interior portion of the lip. A 2, 4, and 6 inch translated lip can be employed to also decrease mass flow over the inlet lower lip in the same manner as the auxiliary inlet. The performance results of the flow improvement concepts show that three possible inlet configurations provide a situation where separation is less likely to occur. A 70 degree droop lip maintains flow conditions such that attached flow over the lower cowl lip may exist for the entire angle of attack range studied. A 0 degree droop and translated lip combination provides similar results for the angle of attack range. The third configuration consists of a 0 degree droop and auxiliary inlet combination. This configuration provides slightly less favorable results than the other two, but still allows for conditions favorable to attached flow within the inlet.

Boles, Michael A.↗