Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “example”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Effect of Electronic Shot Noise on Dynamic Measurements using Optical Techniques: Examples from Rayleigh Scattering and Unsteady PSP

Electronic shot noise is an unavoidable reality in all optical techniques that depend on measuring light intensity. For steady-state, time-averaged measurements the impact of shot noise can be easily reduced by increasing the exposure time, or by averaging over multiple-exposures. That is not the case for unsteady measurements, where time histories of light intensity variations need to be created either by high-speed photography (unsteady PSP) or via photoelectron counting (spectrally resolved Rayleigh scattering) over short time durations using a photo-multiplier tube (PMT) and photon counting electronics. Electronic shot noise introduces a fixed amount of random error, which can overwhelm the light intensity variation caused by turbulent fluctuations. Spectrum computed from such time series shows a fixed noise floor that is independent of the number of data points in the time series. For a fixed optical system, where the collected power of the luminescent light (uPSP), or the scattered light (Rayleigh) is fixed, one needs to resort to special techniques to obtain enough signal-to noise ratio (SNR). For the uPSP application it is shown that averaging of the adjacent pixels improves SNR; although this may lead to a sacrifice of spatial resolution. A second means is to increase the exposure time, which leads to a lowering of the frequency range. For the Rayleigh application, improvements of SNR can be achieved via two different cross-correlation based approaches. The first involves measuring the light intensity using two PMTs using short, contiguous gates; thereby, creating two time-series of data. The second one involves collecting one long time-series of data using one set of measurement device, followed by an odd-even splitting into two time series. When the two time-series are cross-correlated, and a power spectrum is calculated, a significant reduction in the shot noise floor can be achieved. Examples from measurements of density and velocity fluctuations spectra from two different Rayleigh setup are presented to demonstrate the process.

uPSP↗
NASA NTRS1994

An Approximate Kalman Filter for Ocean Data Assimilation; An Example with an Idealized Gulf Stream Model

A practical method of data assimilation for use with large, nonlinear, ocean general circulation models is explored. A Kalman filter based on approximations of the state error covariance matrix is presented, employing a reduction of the effective model dimension, the error's asymptotic steady-state limit, and a time-invariant linearization of the dynamic model for the error integration. The approximations lead to dramatic computational savings in applying estimation theory to large complex systems. We examine the utility of the approximate filter in assimilating different measurement types using a twin experiment of an idealized Gulf Stream. A nonlinear primitive equation model of an unstable east-west jet is studied with a state dimension exceeding 170,000 elements. Assimilation of various pseudo measurements is examined, including velocity, density, and volume transport at localized arrays, and realistic distributions of satellite altimetry and acoustic tomography observations. Results are compared in terms of their effects on the accuracies of the estimation. The approximate filter is shown to outperform a previous study that used an empirical nudging scheme. The examples demonstrate that useful approximate estimation errors can be computed in a practical manner for general circulation models.

['Kalman↗
NASA NTRS2021

Landslide Hazard and Exposure Modelling in Data‐Poor Regions: The Example of the Rohingya Refugee Camps in Bangladesh

Landslide hazards significantly affect economies and populations around the world, but locations where the greatest proportional losses occur are in data‐poor regions where capacity to estimate and prepare for these hazards is most limited. Earth observation (EO) data can fill key knowledge gaps, and can be rapidly used in settings with lower analytical capacity. In this study, we describe a novel series of methods designed to analyze landslide susceptibility, hazard and exposure in the region in and around the Rohingya refugee camps in Bangladesh, where limited data is juxtaposed with a major humanitarian crisis. We demonstrate that a high degree of accuracy is possible even when estimating susceptibility of relatively small landslides. In the context of this example, we also explore how estimates of landslide hazard and exposure are most beneficial to decisions made by humanitarian stakeholders relevant to natural hazards and risk. The unique opportunity to work alongside humanitarian end‐users has allowed us to produce focused products that can be tested while in development. In particular, we stress the importance of communicating the difference between a landslide “early warning system”—for which satellite data may be unsuitable at local scales—and a model that provides relative hazard estimates, where EO may be valuable. The toolbox of methods presented here could be used to generate landslide hazard and exposure maps in other data‐poor regions around the globe.

R A Emberson↗
NASA NTRS2021

Landslide Hazard and Exposure Modelling in Data-Poor Regions: The Example of the Rohingya Refugee Camps in Bangladesh

Landslide hazards significantly affect economies and populations around the world, but locations where the greatest proportional losses occur are in data-poor regions where capacity to estimate and prepare for these hazards is most limited. Earth observation (EO) data can fill key knowledge gaps, and can be rapidly used in settings with lower analytical capacity. In this study, we describe a novel series of methods designed to analyze landslide susceptibility, hazard and exposure in the region in and around the Rohingya refugee camps in Bangladesh, where limited data is juxtaposed with a major humanitarian crisis. We demonstrate that a high degree of accuracy is possible even when estimating susceptibility of relatively small landslides. In the context of this example, we also explore how estimates of landslide hazard and exposure are most beneficial to decisions made by humanitarian stakeholders relevant to natural hazards and risk. The unique opportunity to work alongside humanitarian end-users has allowed us to produce focused products that can be tested while in development. In particular, we stress the importance of communicating the difference between a landslide ‘early warning system’ –for which satellite data may be unsuitable at local scales –and a model that provides relative hazard estimates, where EO may be valuable. The toolbox of methods presented here could be used to generate landslide hazard and exposure maps in other data-poor regions around the globe.

R A Emberson↗
NASA NTRSDate not supplied

The GeoGLOWS Project: Essential Water Variables and Observations – Expected Value Chain, Products, Examples

Essential Water Variables (EWV) were developed over the last decade to ensure that key datasets were made available for closing the global water budget, and addressing the many international actions that require water data. Satellite, surface, and numerical model data all have a role in providing EWVs, and it is a key point that these data must be merged and then fed into decision support applications to answer all the needs of the panoply of user communities. The more specialized the applications become, the higher the demand for development and maintenance resources. Some examples of applications include the NASA Goddard Giovanni, which provides on-line data access and simple analysis; the Global Flood Monitor, which focuses on precipitation-driven flooding; the NASA Landslide Hazard Assessment for Situational Awareness, which similarly treats landslides; and the Global Streamflow Forecasting Project, which provides multiple decision support interfaces, as well as a general toolkit for building new interfaces.

Essential Water Variables↗
NASA NTRS2022

Markovian Statistical Model of Cloud Optical Thickness. Part I: Theory and Examples

We present a generalization of the binary-value Markovian model previously used for statistical characterization of cloud masks to a continuous-value model describing 1D fields of cloud optical thickness (COT). This model has simple functional expressions and is specified by four parameters: the cloud fraction, the autocorrelation (scale) length, and the two parameters of the normalized probability density function of (non-zero) COT values (this PDF is assumed to have gamma-distribution form). Cloud masks derived from this model by separation between the values above and below some threshold in COT appear to have the same statistical properties as in binary-value model described in our previous publications. We demonstrate the ability of our model to generate examples of various cloud-field types by using it to statistically imitate actual cloud observations made by the Research Scanning Polarimeter (RSP) during two field experiments.

binary-value Markovian model↗
NASA NTRS2023

NASCAP Surface Charging Tool Development - Nascap-2k Additional Examples

This document consists of examples of the use of Nascap-2k to analyze moderately complex interactions between spacecraft surfaces and the plasma environment. The narrative assumes familiarity with the use of Nascap-2k and the field of spacecraft-environment interactions. Specific results may be slightly different from those given here due to small differences in the geometry, material selection, and version of Nascap-2k.

Charge Plate Analyzer↗
NASA NTRSDate not supplied

Optimization-Based Parametric Design via High-Fidelity Simulation: Overview + Examples

Design-Build-Test approaches for developing spaceflight hardware are prohibitively time and cost intensive and often lead to suboptimal mechanism designs. Approaches that couple machine learning and high-fidelity physics simulation could eliminate the need for hardware prototyping and dramatically accelerate the engineering design cycle, ultimately reducing cost. This talk presents a modular NASA-developed toolchain to optimize hardware mechanisms in a virtual environment using numerical optimization and multi-body physics simulation and includes example applications related to rigid wheel design for autonomous rovers and computational fluid dynamics.

optimization↗