Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “effect measure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Some comparisons of the flow characteristics of a turbofan compressor system with and without inlet pressure distortion

The measured effects of a circumferential distortion in inlet total pressure on the fan, low, and high compressor of an afterburning turbofan engine are presented and discussed. Extensive inner-stage instrumentation, combined with a unique test technique offered an accurate means of measuring the shifts in flow, performance, and stall mechanisms within the compressor. These effects are compared at one speed to the corresponding effects measured with undistorted inlet flow. The results show the rate at which the distorted flow areas were attenuated and rotated, as well as the change in flow velocities that occurred at various points in the compressor. High response pressure traces indicated the location of stalls including the sequence of dynamic events from the onset and propagation of various stall-recovery events, to compressor surge, to the resulting hammershock.

Evans, D. G.↗

Wind-Tunnel Measurements of Effect of Dive-Recovery Flaps at Transonic Speeds on Models of a Seaplane and a Transport

The effects of wing-lower-surface dive-recovery flaps on the aero- dynamic characteristics of a transonic seaplane model and a transonic transport model having 40 deg swept wings have been investigated in the Langley 16-foot transonic tunnel. The seaplane model had a wing with an aspect ratio of 5.26, a taper ratio of 0.333, and NACA 63A series airfoil sections streamwise. The transport model had a wing with an aspect ratio of 8, a taper ratio of 0.3, and NACA 65A series airfoil sections perpendicular to the quarter-chord line. The effects of flap deflection, flap longitudinal location, and flap sweep were generally investigated for both horizontal-tail-on and horizontal-tail-off configurations. Model force and moment measurements were made for model angles of attack from -5 deg to 14 deg in the Mach number range from 0.70 to 1.075 at Reynolds numbers of 2.95 x 10(exp 6) to 4.35 x 10(exp 6). With proper longitudinal location, wing-lower-surface dive-recovery flaps produced lift and pitching-moment increments that increased with flap deflection. For the transport model a flap located aft on the wing proved to be more effective than one located more forward., both flaps having the same span and approximately the same deflection. For the seaplane model a high horizontal tail provided added effectiveness for the deflected-flap configuration.

Heath, Atwood R., Jr.↗

Effects of oscillating shock impingement on the mixing of a gaseous jet in a Mach 3 airstream

Oscillating shocks of different frequencies were impinged on a 15 deg downstream angled, sonic helium jet injected into a Mach 3 airflow. The oscillating shocks were produced by the normal injection of a steady liquid jet from an opposing wall into the Mach 3 airflow. The freestream Reynolds number per centimeter was 500,000 producing a boundary layer 1.6 times the helium injector diameter in thickness. Vertical helium concentration profiles were taken at nine transverse stations at an axial station 90 helium jet diameters downstream. Helium concentration was measured using an aspirating hot film probe with an integral thermocouple. Oscillating shock frequencies of 60 kHz, 120 kHz, and 240 kHz were studied, compared with the estimated frequencies of 60 kHz of the largest eddies in the approach boundary layer. Visualization using nanoshadowgraph photographs, showed large turbulent structures in all cases. In addition, there were clear changes in eddy size with changing frequency visible on the nanoshadowgraphs. Impingement of the oscillating shock upstream of the helium jet had no measurable effect on the mixing. Impingement downstream of the helium injector produced measurable changes in the mixing achieved. Increasing the frequency of the oscillating shock decreased the maximum concentration and the penetration height of the maximum concentration. There were additional measurable effects on the area of a typical concentration contour with increased oscillation frequency.

Thomas, R. H.↗

Measuring the Effects of Wake Steering With Nacelle-Mounted Scanning Lidar

In large wind plants, wakes from upwind turbines affect downwind turbines by reducing wind speeds and increasing turbulence. Wake steering may mitigate this effect by deflecting the wakes of upwind turbines away from downwind units. Here, we characterize the impact of wakes from yawed turbines at a commercial-scale wind plant under varying atmospheric and turbine operating conditions. Six months of nacelle-based lidar measurements were collected as part of a field campaign in 2019-2020 in the northern US Great Plains to test the effectiveness of wake steering. We separate these lidar scans by atmospheric stability and turbine operating condition to summarize how yawed wind turbine wakes vary with these input parameters in the atmospheric boundary layer. We summarize the impact of wake steering on various wake characteristics including velocity deficit, wake width, and wake center as retrieved from these lidar data. Yawed wakes have significantly different centerline characteristics compared to unyawed wakes, with large regions of meander in the mid wake region. Yawed wakes are also deflected farther than unyawed wakes in less turbulent conditions with velocity deficits persisting further downstream in stable atmospheric conditions. Overall, yawed wind turbine wakes are larger and wider in lower wind speed environments, and yawed wakes are deflected farther in less turbulent conditions, suggesting that wake steering is most effective in stable atmospheric stratification.

17 WIND ENERGY↗

Trends in measurement of solar vector magnetic fields using the Zeeman effect

Trends in spectropolarimetry as applied to the problem of Zeeman effect measurement are discussed. The use of detector arrays to improve observing efficiency is obtained. Which required new polarization modulation schemes that match the time required to read detector arrays. Another significant trend is narrowband filters, to improve angular and temporal coverage, and to Fourier transform spectrometers, to improve spectral coverage and precision. Low-polarization designs and improved methods for compensating instrumental polarization were developed. A requirement for high angular resolution suggests using adaptive optical devices to subdue the effects of bad seeing. The ultimate strategy to beat the seeing is to loft the telescope above the atmosphere such as is planned with a 30-cm telescope in 1985 and a 1250-cm telescope in 1990.

Harvey, J. W.↗

Convection of tin in a Bridgman system. I - Flow characterization by effective diffusivity measurements

An electrochemical titration method was used to investigate the dynamic states in a cylindrical layer of convecting tin. The liquid tin was contained in a cell, with curved boundaries made of quartz and flat boundaries made of a solid state electrolyte - yttria-stabilized zirconia (YSZ). The electrolyte acted as a window through which a trace amount of oxygen could be pumped in or out by the application of a constant voltage. The concentration at the YSZ interface was monitored by operating the electrochemical cell in the galvanic mode. Experimentally determined effective diffusivities of oxygen were compared with the molecular diffusivity. Dynamic states in the convective flow were thus inferred. Temperature measurements were simultaneously made in order to identify the onset of oscillations from a steady convective regime. The experiments were conducted for two different aspect ratios for various imposed temperature gradients and two different orientations with respect to gravity. Transcritical states were identified and comparison to two-dimensional numerical models were made.

Sears, B.↗

Autonomous Aerial Vehicles (AAVs) as a Tool for Improving the Spatial Resolution of Snow Albedo Measurements in Mountainous Regions

We present technical advances and methods to measure effective broadband physical albedo in snowy mountain headwaters using a prototype dual-sensor pyranometer mounted on an Autonomous Aerial Vehicle (an AAV). Our test flights over snowy meadows and forested areas performed well during both clear sky and snowy/windy conditions at an elevation of ~2650 m above mean sea level (MSL). Our AAV-pyranometer platform provided high spatial (m) and temporal resolution (sec) measurements of effective broadband (310–2700 nm) surface albedo. The AAV-based measurements reveal spatially explicit changes in landscape albedo that are not present in concurrent satellite measurements from Landsat and MODIS due to a higher spatial resolution. This AAV capability is needed for validation of satellite snow albedo products, especially over variable montane landscapes at spatial scales of critical importance to hydrological applications. Effectively measuring albedo is important, as annually the seasonal accumulation and melt of mountain snowpack represent a dramatic transformation of Earth’s albedo, which directly affects headwaters’ water and energy cycles.

albedo↗

Measurement and effective field theory interpretation of the photon-fusion production cross section of a pair of W bosons in proton-proton collisions at $\sqrt{s}=13 $ TeV

This analysis presents an observation of the photon-fusion production of W boson pairs using the CMS detector at the LHC. The total cross section of the W + W − production in photon fusion is measured using proton-proton collision data with an integrated luminosity of 138 fb −1 collected with the CMS detector in 2016–2018 at a center-of-mass energy of $\sqrt{s}=13 $ TeV. Events are selected in the final state with one isolated electron and one isolated muon, and no additional tracks associated with the electron-muon production vertex. The total and fiducial production cross sections are 643$^{+82}_{–78}$ fb and 3.96$^{+0.53}_{–0.51}$ fb, respectively, in agreement with the standard model predictions of 631 ± 126 fb and 3.87 ± 0.77 fb. This agreement enables stringent constraints on anomalous quartic gauge couplings within a dimension-8 effective field theory framework.

Hadron-Hadron Scattering↗

Effects of Part-to-Part Flow Variations on Overall Effectiveness and Life of Rotating Turbine Blades

Abstract As firing temperatures in gas turbine engines continue to increase to achieve high efficiencies, components in the main gas path must be protected with cooling flows to ensure lifing targets are met. Manufacturing variations, however, influence the performance and life characteristics of components with the same nominal design. This study presents blade flow and overall cooling effectiveness measurements for nine true-scale, aero engine turbine blades with realistic manufacturing variations. Flow measurements were made through each blade at a fixed pressure ratio to determine flow variability between holes and between blades. Infrared thermography was used to capture spatially-resolved temperature measurements reported as overall effectiveness on the same nine blades under high-speed rotating conditions at the Steady Thermal Aero Research Turbine Laboratory. Thermal performance was correlated with blade flow performance indicating substantial blade-to-blade variations resulting from manufacturing differences. Measurements also indicated wide variations in cooling jet trajectories as well as overall cooling effectiveness. Finally, the observed blade-to-blade variations in effectiveness were scaled to engine conditions with lifing estimates showing some blades would be expected to last only half as long as others due to manufacturing variability.

Engineering↗

Measuring the Effectiveness of Human Autonomy Teaming

Human-Automation Teaming (HAT), is now recognized as a promising solution to the problems of humans managing increasingly complex work systems. A human-automation team can be defined as the interdependent coupling between one or more human operators and one or more autonomous systems requiring collaboration and coordination to accomplish system and task goals (e.g., Langan-Fox et al., 2009). In this conception, automated agents are considered team members that can operate at various levels of automation, be focused on one or more human-information-processing stages, and the interactions with human operators may be adaptable, adjustable or mixed initiative. We investigated some metrics for assessing HAT effectiveness in a demonstration of a HAT tool used by ground station operators in a Reduced Crew Operations project that was conducted at NASA Ames Human Automation Teaming Laboratory. In this paper, we focus on operator metrics of HAT effectiveness, specifically workload and operator behaviors.

measurements↗

Effect of Measured Welding Residual Stresses on Crack Growth

Welding residual stresses in thin plate A516-70 steel and 2219-T87 aluminum butt weldments were measured by the strain-gage hole drilling and X-ray diffraction methods. The residual stress data were used to construct 3D strain fields which were modeled as thermally induced strains. These 3D strain fields were then analyzed with the WARP31) FEM fracture analysis code in order to predict their effect on fatigue and on fracture. For analyses of fatigue crack advance and subsequent verification testing, fatigue crack growth increments were simulated by successive saw-cuts and incremental loading to generate, as a function of crack length, effects on crack growth of the interaction between residual stresses and load induced stresses. The specimen experimental response was characterized and compared to the WARM linear elastic and elastic-plastic fracture mechanics analysis predictions. To perform the fracture analysis, the plate material's crack tearing resistance was determined by tests of thin plate M(T) specimens. Fracture analyses of these specimen were performed using WARP31D to determine the critical Crack Tip Opening Angle [CTOA] of each material. These critical CTOA values were used to predict crack tearing and fracture in the weldments. To verify the fracture predictions, weldment M(T) specimen were tested in monotonic loading to fracture while characterizing the fracture process.

Hampton, Roy W.↗

Measured Spacecraft Dynamic Effects on Atmospheric Science Instruments

On September 1991, NASA launched the Upper Atmosphere Research Satellite. In addition to its atmospheric science mission, spacecraft dynamic effects on science measurements were analyzed. The investigation included two in-flight experiments to determine how each on-board instrument, subsystem and environmental disturbance contributed to the spacecraft dynamic response and how these disturbances affected science measurements. Three case studies are presented which show the impact of spacecraft dynamic response on science measurements. In the first case, correlation of independent atmospheric meridional wind measurements taken by two instruments with the spacecraft dynamic response demonstrated that excessive vibration (exceeding instrument pointing requirements) resulted in wind measurement disagreement. In the second case, solar array disturbances produced a spacecraft response signature on radiometer measurements. The signature explicitly demonstrated that if an instrument has sufficient spatial and temporal resolution, spacecraft dynamic response could impact measurements. In the final case, correlation of an instrument's fine sun sensor data and CO2 measurements demonstrated the effect of temporal and spatial sampling resolution and active pointing control on science measurements. The sun sensor had a frequency modulated characteristic due to spacecraft vibration and the periodic scanning of another instrument which was not present on the CO2 measurements.

Woodard, Stanley E.↗

Fundamental effective temperature measurements for eclipsing binary stars – IV. Selection of new benchmark stars and first results for HD 22064

I describe the selection and initial characterization of 20 eclipsing binary stars that are suitable for calibration and testing of stellar models and data analysis algorithms used by the PLATO mission and spectroscopic surveys. The binary stars selected are F-/G-type dwarf stars with M-type dwarf companions that contribute less than 2 per cent of the flux at optical wavelengths. The light curves typically show well-defined total eclipses with very little variability between the eclipses. I have used near-infrared spectra obtained by the APOGEE survey to measure the spectroscopic orbit for both stars in HD 22064. Combined with an analysis of the TESS light curve, I derive the following masses and radii: M 1 = 1.35 ± 0.03M ⊙ , M 2 = 0.58 ± 0.01M ⊙ , R 1 = 1.554 ± 0.014R ⊙ , R 2 = 0.595 ± 0.008R ⊙ . Using R 1 and the parallax from Gaia EDR3, I find that the primary star’s angular diameter is θ = 0.1035 ± 0.0009 mas. The apparent bolometric flux of the primary star is ${\mathcal {F}}_{{\oplus },0} = (7.51\pm 0.09)\times 10^{-9}$ erg cm -2 s -1 . Hence, this F2V star has an effective temperature $T_{\rm eff,1} = 6763{\rm \, K} \pm 39{\rm \, K}$. HD 22064 is an ideal benchmark star that can be used for ‘end-to-end’ tests of the stellar parameters measured by large-scale spectroscopic surveys or stellar parameters derived from asteroseismology with PLATO. The techniques described here for HD 22064 can be applied to the other eclipsing binaries in the sample in order to create an all-sky network of such benchmark stars.

79 ASTRONOMY AND ASTROPHYSICS↗

Nitrate-To-Ammonia Electroconversion at Neutral pH on Polycrystalline Vanadium Sulfide Derived from Vanadium Disulfide

The electrochemical nitrate reduction reaction (NO3RR) offers a pathway to produce NH3 for fuel and fertilizer from waste NO3-. In this work, a polycrystalline vanadium sulfide (VSx), which is derived from solvothermally grown and annealed VS2, is shown to exhibit excellent NO3RR activity (2.3 +- 0.6 mg.cm-2 geo..h-1 @ -0.92 VRHE) and Faradaic efficiency to NH4+ (69 +- 6% at -0.69 VRHE) in buffered neutral pH electrolyte containing 0.1 M NO3-. A variety of characterization techniques are leveraged to support the VSx assignment, including X-ray photoelectron spectroscopy, near-edge X-ray absorption fine structure spectroscopy, selected area electron diffraction, and X-ray diffraction measurements. The VS2 annealing step reduces the oxide character and generates VSx, which, based on the improved NO3RR activity, results in the creation of active sites for NO3- binding. To help shed light on NO3RR on VSx, VS2 is used as a model system, and a grand-canonical density functional theory (GC-DFT) investigation of VS2 shows strong evidence that S vacancies are active sites for NO3RR, where NO3- outcompetes H+ for adsorption at the S-vacancy sites. Moreover, GC-DFT results highlight a thermodynamically favorable reaction to generate NH4+ in an aqueous electrolyte at relevant cathodic potentials. As an annealed material, VSx may contain undersaturated V sites, which show an electronic structure similar to the theoretically calculated S-vacancy site of VS2, and these sites may contribute to the observed increase in NO3RR activity and selectivity for NH4+ on VSx versus unannealed VS2. Finally, kinetic isotope effect measurements suggest that the kinetic rate-limiting step of the NO3RR on VSx is not proton-coupled, indicating it may be the first electron transfer to adsorbed NO3*.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Importance of Addressing Disagreements Between Nominal and Effective Treatments During Bat Mortality Minimization Validation Studies

As the wind energy industry grows, so too does our need for effective and low-cost bat mortality minimization solutions. Despite knowledge gaps in our understanding of what drives bats to collide with spinning turbines, minimization solutions have shown success during validation studies. Curtailment has been consistently effective, reducing bat mortality from 33%-79%, depending on the curtailment scenario and species present. Several validation studies have demonstrated deterrent solutions, specifically ultrasonic deterrents, to be effective, but overall, more variable compared to curtailment solutions. Further, a study combining curtailment with ultrasonic deterrents produced encouraging results, finding that adding ultrasonic deterrents to turbines that were designated to curtail, significantly reduced mortality rates compared to curtailment only turbines. Despite positive results, the strength of inference achieved with validation studies is limited by methodological constraints associated with appropriately assigning fatalities to treatments. Because of the temporal separation between when a bat collides with a turbine and when it is discovered during a ground-based carcass survey, we must assign carcasses to a treatment that ran during the prior night(s). This process may introduce errors at multiple stages. First, for studies that rotate treatments among turbines, mortality surveyors must be confident that carcasses are 'fresh' such that mortalities are correctly assigned to the treatment from the previous night(s). Second, we must reconcile any misalignments between how we assign treatments and how we implement treatments (e.g., turbines assigned with a deterrent treatment may be implemented as another treatment when deterrent devices are not operating as designed). Finally, for curtailment solutions, it is critical to recognize that measured effects are a function of not just the treatment as implemented but the proportion of the night the treatment is realized (e.g., if wind speeds are greater than the curtailment treatment cut-in speed for the entire night, we cannot expect there to me any differences in mortality reduction relative to control turbines). Using a dataset collected between June and October 2017, that rotated 3 treatments (Deterrent Only, 5 m/s Curtail only, and 5 m/s Curtail & Deterrent) and 1 control condition across 16 turbines each night, we explored the importance and implications of accounting for potential errors in assigning fatalities to treatments. We present preliminary results comparing the mortality associated with error-corrected treatments and control conditions highlighting how the measured effect of a treatment (mortality) greatly depends on site specific implementation.

bats↗

Magneto-optic superlattice thin films: Fabrication, structural and magnetic characterization

During this quarter studies were extended to determine the electronic contribution to the perpendicular interface anisotropy in Co-based multilayers. Using in situ Kerr effect measurements, the influences of different transition metals (TM = Ag, Au, Cu, and Pd) on the magnetic properties of single-crystal Co films grown on Pd (111) and Au (111) surfaces are investigated. Last quarter the discovery of a large peak in the perpendicular anisotropy when approximately one monolayer of Cu or Ag is deposited on the Co surface was reported. We now have added a computer-controlled stepper-motor drive to our MBE sample transfer mechanism. The motor allows us to move the sample at a constant velocity from behind a shutter during deposition. The film, therefore, is deposited as a wedge with a linear variation of thickness across the substrate. In this way, a continuous range of coverage on a single sample is studied. The stepper motor also provides the necessary control for precisely positioning the sample in the laser beam for Kerr effect measurements at the different coverages.

Falco, C. M.↗

Inside out: Measuring the effect of wood anatomy on the efflux and assimilation of xylem–transported CO 2

Carbon dioxide concentrations (including aqueous CO 2 , carbonic acid, bicarbonate, and carbonate) in woody tissues can be up to 750 times higher than atmospheric CO 2 concentrations, ranging from <1% to >26% vs atmospheric ~0.04% (Fig. 1) (Teskey et al. 2008). CO 2 formed through respiration is generally assumed to diffuse to the atmosphere from tissues adjacent to where it is produced. Here, this CO 2 buildups in the stem due to the diffusional barriers in woody and bark tissues. CO 2 in the stem has three fates: 1) it can be refixed for photosynthesis, 2) it can be used for anaplerotic reactions, or 3) it can exit the plant either adjacent to where it was produced (radial diffusion) or in an area remote from its point of origin (xylem-transported CO 2 ). Not accounting for assimilation of xylem-transported CO 2 may result in underestimating total plant photosynthesis. Alternatively, overlooking the transport of CO 2 away from its point of origin complicates the estimation of respiration in stems, branches, or even leaves. For example, CO 2 efflux from the stem may not solely represent stem respiration, but it may represent CO 2 generated through respiration in areas remote from the point of efflux (Stutz et al., 2017). Additionally, wood anatomy and branching architecture likely influence how much and how far xylem-transported CO 2 travels (Fig. 2). Few studies have combined measurements of both the efflux of xylem-transported CO 2 from trees together and the assimilation of xylem-transported CO 2 . Excitingly in this issue of Plant, Cell & Environment, Salomón et al. (pp. ) demonstrate the importance of xylem-transported CO 2 in plants with different wood anatomies by comparing the amount of xylem-transported CO 2 used for photosynthesis to the amount effluxed.

54 ENVIRONMENTAL SCIENCES↗