Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dissociation energy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Comparative analysis of internal energy excitation and dissociation of nitrogen predicted by independently developed ab initio potential energy surfaces

In this article we present a comparative atomic level study analyzing the vibrational excitation and dissociation of molecular nitrogen due to N 2 ⁢( 1 Σ g ⁢ + )+N⁢( 4 S u ) and N 2 ⁢( 1 Σ g ⁢ + )+N 2 ⁢( 1 Σ g ⁢+ ) interactions governed by independently developed potential energy surfaces at the University of Minnesota and NASA Ames Research Center. Further, vibrational excitation was studied for N 2 +N 2 interactions from T=10000 to 25000 K and for N 2 +N from T=5000 to 30000 K. Nonequilibrium dissociation is studied from T=10000 to 30000 K under the quasi-steady-state condition for N 2 +N 2 and N 2 +N interactions. Finally, an inviscid Mach 20 dissociating nitrogen flow over a cylinder with a Knudsen number of 0.015 is carried out to study the impact of molecular interactions predicted by independently developed potential energy surfaces on a canonical hypersonic flow.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Experimental and Computational Description of the Interaction of H and H – with U

In this work, the results of ab initio correlated molecular orbital theory electronic structure calculations for low-lying electronic states are presented for UH and UH – and compared to photoelectron spectroscopy measurements. The calculations were performed at the CCSD(T)/CBS and multireference CASPT2 including spin–orbit effects by the state interacting approach levels. The ground states of UH and UH – are predicted to be 4 Ι 9/2 and 5 Λ 6 , respectively. The spectroscopic parameters T e , r e , ω e , ω e x e , and Be were obtained, and potential energy curves were calculated for the low energy Ω states of UH. The calculated adiabatic electron affinity is 0.468 eV in excellent agreement with an experimental value of 0.462 ± 0.013 eV. The lowest vertical detachment energy was predicted to be 0.506 eV for the ground state, and the adiabatic ionization energy (IE) is predicted to be 6.116 eV. The bond dissociation energy (BDE) and heat of formation values of UH were obtained using the IE calculated at the Feller–Peterson–Dixon level. For UH, UH – , and UH + , the BDEs were predicted to be 225.5, 197.9, and 235.5 kJ/mol, respectively. The BDE for UH is predicted to be ~20% lower in energy than that for ThH. The analysis of the natural bond orbitals shows a significant U + H – ionic component in the bond of UH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Revealing the nature of electron correlation in transition metal complexes with symmetry breaking and chemical intuition

Here, in this work, we provide a nuanced view of electron correlation in the context of transition metal complexes, reconciling computational characterization via spin and spatial symmetry breaking in single-reference methods with qualitative concepts from ligand-field and molecular orbital theories. These insights provide the tools to reliably diagnose the multi-reference character, and our analysis reveals that while strong (i.e., static) correlation can be found in linear molecules (e.g., diatomics) and weakly bound and antiferromagnetically coupled (monometal-noninnocent ligand or multi-metal) complexes, it is rarely found in the ground-states of mono-transition-metal complexes. This leads to a picture of static correlation that is no more complex for transition metals than it is, e.g., for organic biradicaloids. In contrast, the ability of organometallic species to form more complex interactions, involving both ligand-to-metal σ-donation and metal-to-ligand π-backdonation, places a larger burden on a theory's treatment of dynamic correlation. We hypothesize that chemical bonds in which inter-electron pair correlation is non-negligible cannot be adequately described by theories using MP2 correlation energies and indeed find large errors vs experiment for carbonyl-dissociation energies from double-hybrid density functionals. A theory's description of dynamic correlation (and to a less important extent, delocalization error), which affects relative spin-state energetics and thus spin symmetry breaking, is found to govern the efficacy of its use to diagnose static correlation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Guided Ion Beam and Quantum Chemical Investigation of the Thermochemistry of Thorium Dioxide Cations: Thermodynamic Evidence for Participation of f Orbitals in Bonding

Kinetic energy dependent reactions of ThO + with O 2 are studied using a guided ion beam tandem mass spectrometer. The formation of ThO 2 + in the reaction of ThO + with O 2 is observed to be slightly endothermic and also exhibits two obvious features in the cross section. These kinetic energy dependent cross sections were modeled to determine a 0 K bond dissociation energy of D 0 (OTh + - O) = 4.94 ± 0.06 eV. This value is slightly larger but within experimental uncertainty of less precise previously reported experimental values. The higher energy feature in the ThO 2 + cross section was also analyzed and suggests formation of an excited state of the product ion lying 3.1 ± 0.2 eV above the ground state. Additionally, the thermochemistry of ThO 2 + was explored by quantum chemical calculations, including a full Feller-Peterson-Dixon (FPD) composite approach with correlation contributions up to CCSDT(Q) and four-component spin-orbit corrections, as well as more approximate CCSD(T) calculations including semiempirical estimates of spin-orbit energy contributions. The FPD approach predicts D 0 (OTh + -O) = 4.87 ± 0.04 eV, in good agreement with the experimental value. Analogous FPD results for ThO+, ThO, and ThO 2 are also presented, including ionization energies for both ThO and ThO 2 . The ThO 2 + bond energy is larger than those of its transition metal congeners, TiO 2 + and ZrO 2 + , which can be attributed partially to an actinide contraction, but also to contributions from the participation of f orbitals on thorium that are unavailable to the transition metal systems.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Selective activation of methane C–H bond in the presence of methanol

Direct methane to methanol (MTM) conversion over heterogeneous catalysts is a promising route for valorization of methane. The methane C-H bond activation is considered as the key step of the MTM and is the focus of considerable research activity. However, the formed methanol typically suffers from overoxidation largely due to the cleavage of a methanol C-H bond, whose bond dissociation energy is ca. 0.5 eV lower than that of the methane C-H bond, which usually translates to a transition state energy of the methanol C-H bond cleavage that is ca. 0.55 eV lower than that of methane whenever the reactions proceed through a radical mechanism. Furthermore, we propose a general approach for decreasing the transition state energy difference between the CH 4 and CH 3 OH C-H bond dissociation. When a metal-oxide supported cationic transition metal atom and a neighboring oxygen on the oxide surface serve as the active site, the transition state energy difference through a surface-stabilized pathway can be noticeably narrowed as compared with that of a radical pathway. For Ir, Pt and Rh-doped anatase TiO 2 (101), the CH 4 C-H bond activation can be preferred over that of CH 3 OH at significant methanol mole fraction. Also, for PdAu alloys containing adsorbed oxygen and positively charged Pd, calculations suggest in agreement with recent experiments (Science 367 (6474), 193-197) that the CH 4 C-H bond can be selectively activated in the presence of CH 3 OH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Electronic properties of ThC − and ThC

The present study investigates the properties of low-lying states of ThC − and ThC using correlated wave function theories. To this end, we employed multireference calculations and various coupled-cluster approaches in combination with large correlation-consistent basis sets. These methods were applied to examine potential energy curves (PECs), electron configurations, energetics, spectroscopic constants, and spin–orbit coupling effects for 9 states of ThC − and 18 states of ThC. The ground states of ThC − and ThC were identified as single-reference 2 Σ + 1/2 (I) and $^3Σ^+_{0^-} (\textrm{I})$, respectively. Electron detachment from the 7s orbital of the Th center in ThC − [ 2 Σ + (I); 1σ 2 2σ1 3 σ2 1 π 4 ] yields ThC [ 3 Σ + (I); 1σ 2 2σ 1 3σ 1 1π 4 ]. The calculated adiabatic detachment energy (ADE) and vertical detachment energy (VDE) for this process are 1.591 and 1.604 eV, respectively. Furthermore, the dissociation energy (D 0 ) of ThC [$^3Σ^+_{0^-} (\textrm{I})$] is predicted to be 5.099 eV. The standard enthalpy of formation, $ΔH^{°}_{\textrm{f}}$ (298 K), of ThC is estimated to be 822.52 ± 6 kJ mol −1 .

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1972

Photodissociation of nitrogen dioxide by pulsed laser light at 6943 A.

Nitrogen dioxide was photodissociated using a pulsed ruby laser at 6943 A. The energy of a single photon at this wavelength was equivalent to only 57% of the dissociation energy. The mechanism proposed to account for the results was the consecutive absorption of two photons, the first resulting in a short-lived excited state. The second photon is then absorbed by the excited species resulting in dissociation.

Gerstmayr, J. W.↗
DOE OSTI2020

Optimal Orbital Selection for Full Configuration Interaction (OptOrbFCI): Pursuing the Basis Set Limit under a Budget

Full configuration interaction (FCI) solvers are limited to small basis sets due to their expensive computational costs. An optimal orbital selection for FCI (OptOrbFCI) is proposed to boost the power of existing FCI solvers to pursue the basis set limit under a computational budget. The optimization problem coincides with that of the complete active space SCF method (CASSCF), while OptOrbFCI is algorithmically quite different. OptOrbFCI effectively finds an optimal rotation matrix via solving a constrained optimization problem directly to compress the orbitals of large basis sets to one with a manageable size, conducts FCI calculations only on rotated orbital sets, and produces a variational ground-state energy and its wave function. Coupled with coordinate descent full configuration interaction (CDFCI), we demonstrate the efficiency and accuracy of the method on the carbon dimer and nitrogen dimer under basis sets up to cc-pV5Z. We also benchmark the binding curve of the nitrogen dimer under the cc-pVQZ basis set with 28 selected orbitals, which provide consistently lower ground-state energies than the FCI results under the cc-pVDZ basis set. Furthermore, the dissociation energy in this case is found to be of higher accuracy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Pressure Effects on the Relaxation of an Excited Ethane Molecule in High-Pressure Bath Gases

Here, we use molecular dynamics to calculate the rotational and vibrational energy relaxation of C 2 H 6 in Ar, Kr, and Xe bath gases over a pressure range of 10 to 400 atm and at temperatures of 300 K and 800 K. The C 2 H 6 is instantaneously excited by 80 kcal/mol randomly distributed into both vibrational and rotational modes. The computed relaxation rates show little sensitivity to the identity of the noble gas in the bath. Vibrational relaxation rates show a non-linear pressure dependence at 300 K. At 800 K the reduced range of bath gas densities covered by the range of pressures do not yet show any non-linearity in the pressure dependence. Rotational relaxation is characterized with two relaxation rates. The slower rate is comparable to the vibrational relaxation rate. The faster rate has a linear pressure dependence at 300 K but an irregular, nonlinear pressure dependence at 800 K. To understand this, a model was developed based on approximating the periodic box used in the molecular dynamics simulations by an equal-volume collection of cubes where each cube is sized to allow only single occupancy by the noble gas or the molecule. Combinatorial statistics then leads to a pressure and temperature dependent analytic distribution of the bath gas species the molecule encounters in a collision. This distribution, the dissociation energy of molecule/bath gas complexes and bath gas clusters, and the computed energy release per collision combine to show that only at 300 K is the energy release sufficient to dissociate likely complexes and clusters. This suggests that persistent and pressure-dependent clusters and complexes at 800 K may be responsible for the non-linear pressure dependence of rotational relaxation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1992

Computational studies of metal-metal and metal-ligand interactions

The geometric structure of Cr(CO)6 is optimized at the modified coupled-pair functional (MCPF), single and double excitation coupled-cluster (CCSD) and CCSD(T) levels of theory (including a perturbational estimate for connected triple excitations), and the force constants for the totally symmetric representation are determined. The geometry of Cr(CO)5 is partially optimized at the MCPF, CCSD and CCSD(T) levels of theory. Comparison with experimental data shows that the CCSD(T) method gives the best results for the structures and force constants, and that remaining errors are probably due to deficiencies in the one-particle basis sets used for CO. A detailed comparison of the properties of free CO is therefore given, at both the MCPF and CCSD/CCSD(T) levels of treatment, using a variety of basis sets. With very large one-particle basis sets, the SSCD(T) method gives excellent results for the bond distance, dipole moment and harmonic frequency of free CO. The total binding energies of Cr(CO)6 and Cr(CO)5 are also determined at the MCPF, CCSD and CCSD(T) levels of theory. The CCSD(T) method gives a much larger total binding energy than either the MCPF or CCSD methods. An analysis of the basis set superposition error (BSSE) at the MCPF level of treatment points out limitations in the one-particle basis used here and in a previous study. Calculations using larger basis sets reduced the BSSE, but the total binding energy of Cr(CO)6 is still significantly smaller than the experimental value, although the first CO bond dissociation energy of Cr(CO)6 is well described. An investigation of 3s3p correlation reveals only a small effect. The remaining discrepancy between the experimental and theoretical total binding energy of Cr(CO)6 is probably due to limitations in the one-particle basis, rather than limitations in the correlation treatment. In particular an additional d function and an f function on each C and O are needed to obtain quantitative results. This is underscored by the fact that even using a very large primitive se (1042 primitive functions contracted to 300 basis functions), the superposition error for the total binding energy of Cr(CO)6 is 22 kcal/mol at the MCPF level of treatment.

Barnes, Leslie A.↗
NASA NTRS1992

The structure and energetics of Cr(CO)6 and Cr(CO)5

The geometric structure of Cr(CO)6 is optimized at the modified coupled pair functional (MCPF), single and double excitation coupled-cluster (CCSD) and CCSD(T) levels of theory (including a perturbational estimate for connected triple excitations), and the force constants for the totally symmetric representation are determined. The geometry of Cr(CO)5 is partially optimized at the MCPF, CCSD, and CCSD(T) levels of theory. Comparison with experimental data shows that the CCSD(T) method gives the best results for the structures and force constants, and that remaining errors are probably due to deficiencies in the one-particle basis sets used for CO. The total binding energies of Cr(CO)6 and Cr(CO)5 are also determined at the MCPF, CCSD, and CCSD(T) levels of theory. The CCSD(T) method gives a much larger total binding energy than either the MCPF or CCSD methods. An analysis of the basis set superposition error (BSSE) at the MCPF level of treatment points out limitations in the one-particle basis used. Calculations using larger basis sets reduce the BSSE, but the total binding energy of Cr(CO)6 is still significantly smaller than the experimental value, although the first CO bond dissociation energy of Cr(CO)6 is well described. An investigation of 3s3p correlation reveals only a small effect. In the largest basis set, the total CO binding energy of Cr(CO)6 is estimated to be 140 kcal/mol at the CCSD(T) level of theory, or about 86 percent of the experimental value. The remaining discrepancy between the experimental and theoretical value is probably due to limitations in the one-particle basis, rather than limitations in the correlation treatment. In particular an additional d function and an f function on each C and O are needed to obtain quantitative results. This is underscored by the fact that even using a very large primitive set (1042 primitive functions contracted to 300 basis functions), the superposition error for the total binding energy of Cr(CO)6 is 22 kcal/mol at the MCPF level of treatment.

Barnes, Leslie A.↗
DOE OSTI2023

Bond Energies of UO + and UC + : Guided Ion Beam and Quantum Chemical Studies of the Reactions of Uranium Cation with O 2 and CO

Here, guided ion beam tandem mass spectrometry was used to examine the kinetic energy dependent reactions of U + with O 2 and CO. In the reaction of U + with O 2 , the UO + product is formed in a barrierless and exothermic process with a reaction efficiency at low energies of k/k col =1.1±0.2, but increases at higher collision energies. Formation of both UO + and UC + in the reaction of U + with CO is endothermic. 0 K bond dissociation energies (BDEs) of D 0 (U + -O)=7.88±0.09 eV and D 0 (U + -C)=4.03±0.13 eV were determined by analyzing the kinetic energy dependent cross sections in the latter endothermic reactions. These values are within experimental uncertainty of previously reported experimental values. Additionally, the electronic states of UO + and UC + and the potential energy surfaces for the reactions were explored by quantum chemical calculations. The former include a full Feller-Peterson-Dixon composite approach with correlation contributions up to CCSDT(Q) for UO and UO + , yielding D 0 (U-O)=7.82 eV and D 0 (U + -O)=7.99 eV, as well as more approximate CCSD(T) calculations where a semi-empirical model was used to estimate spin-orbit energy contributions, which are generally found to improve the agreement with experiment. Both experimental BDEs are observed to be close to those of their transition metal congeners, ScL + , YL + , and GdL + (L=O and C).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

QC-GN 2 oMS 2 : a Graph Neural Net for High Resolution Mass Spectra Prediction

Predicting the mass spectrum of a molecular ion is often accomplished via three generalized approaches: rules-based methods for bond breaking, deep learning, or quantum chemical (QC) modeling. Rules-based approaches are often limited by the conditions for different chemical subspaces and perform poorly under chemical regimes with few defined rules. QC modeling is theoretically robust but requires significant amounts of computational time to produce a spectrum for a given target. Among deep learning techniques, graph neural networks (GNNs) have performed better than previous work with fingerprint-based neural networks in mass spectra prediction. To explore this technique further, we investigate the effects of including quantum chemically derived information as edge features in the GNN to increase predictive accuracy. The models we investigated include categorical bond order, bond force constants derived from extended tight-binding (xTB) quantum chemistry, and acyclic bond dissociation energies. Throughout this work, we evaluated these models against a control GNN with no edge features in the input graphs. Bond dissociation enthalpies yielded the best improvement with a cosine similarity score of 0.462 relative to the baseline model (0.437). In this work we also apply dynamic graph attention which improves performance on benchmark problems and supports the inclusion of edge features. Between implementations, we investigate the nature of the molecular embedding for spectra prediction and discuss the recognition of fragment topographies in distinct chemistries for further development in tandem mass spectrometry prediction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Route to Chemical Accuracy for Computational Uranium Thermochemistry

Benchmark spinor-based relativistic coupled-cluster calculations for the ionization energies of the uranium atom, the uranium monoxide molecule (UO), and the uranium dioxide molecule (UO 2 ) and for the bond dissociation energies of UO and UO 2 are reported. The accuracy of these calculations in the treatments of relativistic, electron correlation, and basis-set effects is analyzed. Furthermore, the intrinsic convergence of the computed results and the favorable comparison with the experimental values demonstrate the unique applicability of the spinor representation of quantum-chemical methods to open-shell uranium-containing atomic and molecular species with uranium oxidation states ranging from U(0) to U(V).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Theoretical and Experimental Study of the Spectroscopy and Thermochemistry of UC +/0/–

A combination of high-level ab initio calculations and anion photoelectron detachment (PD) measurements is reported for the UC, UC – , and UC + molecules. To better compare the theoretical values with the experimental photoelectron spectrum (PES), a value of 1.493 eV for the adiabatic electron affinity (AEA) of UC was calculated at the Feller–Peterson–Dixon (FPD) level. The lowest vertical detachment energy (VDE) is predicted to be 1.500 eV compared to the experimental value of 1.487 ± 0.035 eV. A shoulder to lower energy in the experimental PD spectrum with the 355 nm laser can be assigned to a combination of low-lying excited states of UC – and excited vibrational states. The VDEs calculated for the low-lying excited electronic states of UC at the SO-CASPT2 level are consistent with the observed additional electron binding energies at 1.990, 2.112, 2.316, and 3.760 eV. Potential energy curves for the Ω states and the associated spectroscopic properties are also reported. Compared to UN and UN + , the bond dissociation energy (BDE) of UC (411.3 kJ/mol) is predicted to be considerably lower. The natural bond orbitals (NBO) calculations show that the UC 0/+/– molecules have a bond order of 2.5 with their ground-state configuration arising from changes in the oxidation state of the U atom in terms of the 7s orbital occupation: UC (5f 2 7s 1 ), UC – (5f 2 7s 2 ), and UC + (5f 2 7s 0 ). Furthermore, the behavior of the UN and UC sequence of molecules and anions differs from the corresponding sequences for UO and UF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗